Construction Method for Performance Management Curriculum Content System Based on Knowledge Graph

Performance Management is the core course of human resource management major,but its knowledge points lack multi-dimensional correlations.There are problems such as scattered content and unclear system,and it is urgent to reconstruct the content system of the course.Knowledge graph technology can integrate massive and scattered information into an organic structure through semantic correlation and reasoning.The application of knowledge graph to education and teaching can promote scientific and personalized teaching evaluation and better realize individualized teaching.This paper systematically combs the knowledge points of Performance Management course and forms a comprehensive knowledge graph.The knowledge point is associated with specific questions to form the problem map of the course,and then the knowledge point is further associated with the ability target to form the ability map of the course.Then,the knowledge point is associated with teaching materials,question bank and expansion resources to form a systematic teaching database,thereby giving the method of building the content system of Performance Management course based on the knowledge map.This research can be further extended to other core management courses to realize the deep integration of knowledge graph and teaching.

Comparison of Construction Method for DEM Simulation of Ellipsoidal Particles

Discrete element model was developed to simulate the ellipsoidal particles moving in the moving bed. Multi-element model was used to describe a ellipsoidal particle, the contact detection algorithm of ellipsoidal particle was developed, and both contact force and gravity force were considered in the models. The simulation results were validated by our experiment. Three algorithms for representing an ellipsoidal particle were compared in macro and micro aspects. The results show that there exists big difference in the microscopic parameters such as kinetic energy, rotational kinetic energy, deformation, contact force and collision number which leads to the difference of macroscopic parameters. The relative error in the discharge rate and tracer particle position is the largest between 3-tangent-element representation and experimental results. The flow pattern is similar for the 5-element and 3-intersection representations. The only difference is the discharge rate of 5-element representation is larger than the experimental value and that of the 3-intersection representation has the contrary result. Finally the 3-intersection- element reoresentation is chosen in the simulation due to less comouting time than that of the 5-element renresentation.

Responses of bacterial community to potential heap construction methods of fine-grained copper tailings in column bioleaching system

The column bioleaching of copper flotation tailings was comparatively investigated using layered heap construction method(LM),agglomerate heap construction method(AM),and pellets-sintering heap construction method(PM).The bacterial communities of free,attached,weakly-attached,and strongly-attached microbes in the later bioleaching stage were investigated.In AM group,the addition of lump sulphide ore resulted in the low leachate pH,high ferric iron concentration,and rapid microbial adsorption,which obtained the maximum copper extraction(60.1%)compared with LM(54.6%)and PM(43.9%)groups.The relative abundance of dominant genera and microbial communities of different microbiota underwent changes in three heap construction methods.The alpha-diversity indexes of attached,weakly-attached,and strongly-attached microbes were different,while no significant change was observed in free bacteria.The variation of whole bacterial community was significantly associated with solution pH,total iron,and ferric iron concentrations.Pearson correlation analysis and partial least square path model both indicated that attached bacteria made larger contribution to the copper extraction of tailings.

Inverse Construction Methods of Heterogeneous NURBS Object Based on Additive Manufacturing

According to the requirement of heterogeneous object modeling in additive manufacturing(AM),the Non-Uniform Rational B-Spline(NURBS)method has been applied to the digital representation of heterogeneous object in this paper.By putting forward the NURBS material data structure and establishing heterogeneous NURBS object model,the accurate mathematical unified representation of analytical and free heterogeneous objects have been realized.With the inverse modeling of heterogeneous NURBS objects,the geometry and material distribution can be better designed to meet the actual needs.Radical Basis Function(RBF)method based on global surface reconstruction and the tensor product surface interpolation method are combined to RBF-NURBS inverse construction method.The geometric and/or material information of regular mesh points is obtained by RBF interpolation of scattered data,and the heterogeneous NURBS surface or object model is obtained by tensor product interpolation.The examples have shown that the heterogeneous objects fitting to scattered data points can be generated effectively by the inverse construction methods in this paper and 3D CAD models for additive manufacturing can be provided.

Construction Method of Modern Architecture under the Background of the Times

Taking the development of the times as the background,the historical evolution of modern architecture is combed from the perspective of the initial stage of industrialization to post-industrialization and then to the information age.It can be seen that there is a close connection between development and modern architecture in the context of the times.With the advancement of science and technology,the construction of buildings has undergone varying degrees of changes due to aesthetics,materials,structure,humanities,and technology.Behind these changes are the results of the progress and development of social productivity.While changing people’s social cognition,it also changes the development process of architecture.

Joint 3D traveltime calculation based on fast marching method and wavefront construction

3D traveltime calculation is widely used in seismic exploration technologies such as seismic migration and tomography. The fast marching method （FMM） is useful for calculating 3D traveltime and has proven to be efficient and stable. However, it has low calculation accuracy near the source, which thus gives it low overall accuracy. This paper proposes a joint traveltime calculation method to solve this problem. The method firstly employs the wavefront construction method （WFC）, which has a higher calculation accuracy than FMM in calculating traveltime in the small area near the source, and secondly adopts FMM to calculate traveltime for the remaining grid nodes. Due to the increase in calculation precision of grid nodes near the source, this new algorithm is shown to have good calculation precision while maintaining the high calculation efficiency of FMM, which is employed in most of the computational area. Results are verified using various numerical models.

4D Design and Simulation Technologies and Process Design Patterns to Support Lean Construction Methods

The objective of this ongoing joint research program is to determine how 3D/4D modeling, simulation and visualization of Products (buildings), Organizations and Processes (POP) can support lean construction. Initial findings suggest that Process Design Pattern may have the potential to intuitively support ICT based lean construction. We initiated a 'Process Archeology' in order to reveal the requirements for tools that can support the planning, simulation and control of lean construction methods. First findings show that existing tools provide only limited support and therefore, we started to develop new methodologies and technologies to overcome these shortcomings. Through the introduction of Process Design Patterns, we intent to establish process thinking in the interdisciplinary POP design. Optimized construction processes may be synthesized with semi-automatic methods by applying Process Design Patterns on building structures. By providing process templates that integrate problem solution and expert knowledge, Process Design Patterns may have the potential to ensure high quality process models.

A new construction method of LDPC codes for optical transmission systems

Based on the construction method of system- atically constructed Gallager （SCG）（4, k） code, a new improved construction method of low density parity check （LDPC） code is proposed. Compared with the construction method of SCG（4, k） codes improved before, the proposed construction method has some advantages, such as saving storage space and reducing computation complexity in the hardware implementation. And then LDPC（5929, 5624） code with 5.42% redundancy is constructed by the proposed method. The simulation results and analysis show that the constructed LDPC（5929, 5624） code has better error-correction performance, lower redundancy and lower decoding complexity than those of a classic Reed- Solomon （RS）（255, 239） code. Therefore, LDPC（5929, 5624） code, constructed by the proposed construction method on LDPC codes, can better suitable for optical transmission systems.

Research on the Reform of the Course“Reading of Concrete Structure Plan and Construction Drawings”Under the Background of“Promoting Teaching and Learning Through Competitions”

The inherent teaching approach can no longer meet the demands of society.In this paper,current issues within the teaching landscape of architectural engineering technology in higher vocational colleges as well as the policies and teaching demands that formed the basis of this model were analyzed.The study shows the importance of the implementation of the teaching model“promoting teaching and learning through competitions.”This model puts emphasis on the curriculum and teaching resources,while also integrating the teaching process and evaluation with competition.These efforts aim to drive education reform in order to better align with the objectives of vocational education personnel training,while also acting as a reference for similar courses.

Construction and control technology of the main bridge superstructure of Sutong Bridge

The Sutong Yangtze River Bridge(short as Sutong Bridge)is now the largest span cable-stayed bridge in the world.The construction of the superstructure of the middle bridge covered several stages including erection of the big block girders for the side span,assistant span and tower area,erection of standard girders and closure of the middle span.The big block girders were hoisted by a floating crane,and the standard girders were hoisted by a double crane system on the deck.The pushing assistant method was adopted for the middle span closure construction.Furthermore,key technologies and innovative methods used in the processes of girder erection and cable assemblage in all stages were expatiated systematically.An all-stage self-adaptive geometry control method was used in the construction process.By accurately controlling the unstressed dimensions and shape of all structural components in each step,and realization that the control system and the controlled system adapt to each other,the goal was to make control of the final line shape and inner force of the bridge structure achievable.Two solutions,including GPS based and total station based dynamic geometry monitoring systems,were used to resolve the measure problem under the wide-range of wind-induced vibrations in the long cantilever state.Finally,research on the wind-induced vibration of the superstructure during the construction period was executed.Buffeting response analysis to the longest single and double cantilever states were carried out.The analysis and evaluation of wind resistance safety of the main girders under the longest single cantilever state was made,and corresponding wind resistance measures were suggested.The as-built geometric error and cable force error were controlled in a required design range,and this whole technological achievement can be a benchmark for construction of other large span cable-stayed bridges in the future.

Construction Approaches of Enterprise Innovation Network from the Perspective of Social Network

As an important means for enterprises to promote technological progress,product development and service level,innovation has an absolute role in enhancing enterprises'innovation strength and market strength.In the context of frequent and rapid product replacement and shortened technological innovation cycle in modern society,through the embedding of social networks,forming platforms for higher education institutions,governments,capital markets,research institutions and intermediary links to promote the integration of innovation and capital development and make the most of every resource has become an important way.From the perspective of social network,the methods and necessary approaches for the establishment of enterprise innovation network are studied in this article.

The Form Characteristics and Construction of the Public Space of the Oasis Traditional Settlements in Turpan

Based on the analysis of the form characteristics and construction of the public space of oasis traditional settlements in Turpan,and from the analysis and summary of the types,elements,scales and functions of the public space of the traditional settlements,this study put forward that the public space of the oasis villages can be divided into point space,line space and plane space,and the formation and evolution rules of the public space of oasis traditional settlements in Turpan were obtained.Explore the role of public space in the construction of traditional settlements’ overall space,so as to provide reference for the development and renewal of public space of the current similar oasis settlements.

Construction of <i>k</i>-Variate Survival Functions with Emphasis on the Case <i>k</i>= 3

The purpose of this paper is to present a general universal formula for k-variate survival functions for arbitrary k = 2, 3, ..., given all the univariate marginal survival functions. This universal form of k-variate probability distributions was obtained by means of “dependence functions” named “joiners” in the text. These joiners determine all the involved stochastic dependencies between the underlying random variables. However, in order that the presented formula (the form) represents a legitimate survival function, some necessary and sufficient conditions for the joiners had to be found. Basically, finding those conditions is the main task of this paper. This task was successfully performed for the case k = 2 and the main results for the case k = 3 were formulated as Theorem 1 and Theorem 2 in Section 4. Nevertheless, the hypothetical conditions valid for the general k ≥ 4 case were also formulated in Section 3 as the (very convincing) Hypothesis. As for the sufficient conditions for both the k = 3 and k ≥ 4 cases, the full generality was not achieved since two restrictions were imposed. Firstly, we limited ourselves to the, defined in the text, “continuous cases” (when the corresponding joint density exists and is continuous), and secondly we consider positive stochastic dependencies only. Nevertheless, the class of the k-variate distributions which can be constructed is very wide. The presented method of construction by means of joiners can be considered competitive to the copula methodology. As it is suggested in the paper the possibility of building a common theory of both copulae and joiners is quite possible, and the joiners may play the role of tools within the theory of copulae, and vice versa copulae may, for example, be used for finding proper joiners. Another independent feature of the joiners methodology is the possibility of constructing many new stochastic processes including stationary and Markovian.

Guide for Barriers when Using Soils and Construction Materials with Environmentally Sensitive Contents

On 16 July 2021,the German“Mantelverordnung”(Construction Materials Regulation)was published in the Federal Law Journal.From August 1,2023,this regulation is to be applied nationwide and,for the first time,regulates legally nationwide binding requirements for mineral construction waste and its use in technical structures.It also refers to specific construction methods with construction waste material.In the course of the construction of infrastructure traffic routes,it is possible to use these construction materials with limited contamination for the construction of,e.g.,noise barriers,dams or embankments.The German M TS E(Merkblattüber Bauweisen für Technische Sicherungsmaßnahmen beim Einsatz von Böden und Baustoffen mit umweltrelevanten Inhaltsstoffen im Erdbau)Guideline of the FGSV(Road and Transportation Research Association)lists various alternatives for barriers in such structures.Geosynthetic barriers,e.g.,GCLs(Geosynthetic Clay Liners,also known as bentonite mats)or polymeric geomembranes as well as other geosynthetics can have economic and design advantages over conventional mineral barriers.Depending on the proposed construction method,the guideline sets out certain requirements,not only but also for permittivity and confining stress.In the following,the construction methods in general and the design solutions with GCLs in particular are presented.

Penalty model for delay of bidding section construction period in South-to-North Water Diversion Eastern Route Project from perspective of programs

According to the multi-project and program management theory, this paper analyzes the program generation principle and establishes a program based on progress goals. On the basis of the present situation of calculation of penalty for delay of the bidding section construction period with the critical path method, we studied the effects of contractor-induced delay of the bidding section construction period in detail, including the effects on the construction period of the bidding section itself, the earliest start times of the next bidding section and other subsequent bidding sections, and the construction period of the program, and then constructed a penalty model for delay of the bidding section construction period from the perspective of programs. Using the penalty model, we conducted a practical analysis of penalty for delay of the construction period of the Baoying station program in the South-to-North Water Diversion Project. The model can help determine the amount of penalty for delay of the construction period in bidding sections scientifically and reasonably,

A constructive method for approximating trigonometric functions and their integrals

This paper presents an interpolation-based method(IBM)for approximating some trigonometric functions or their integrals as well.It provides two-sided bounds for each function,which also achieves much better approximation effects than those of prevailing methods.In principle,the IBM can be applied for bounding more bounded smooth functions and their integrals as well,and its applications include approximating the integral of sin(x)/x function and improving the famous square root inequalities.

A NEW METHOD FOR CONSTRUCTING DIGITAL-STRAIN-FIELD-IMAGES FROM MOIRE PATTERNS

A new method for constructing digital-strain-field-image from a moire pattern with the help of digital image processing technique is proposed in this paper. The digital-strain-field-image expresses the strain values directly by its grey levels. The digital-strain-field-image can be obtained by making a differentiation for the digital moire pattern and doing a simple division operation. This image not only gives the visual strain field distribution, but also gives the strain values of every point. This method is simple and applicable and has satisfactory accuracy.

Strong Stability Preserving IMEX Methods for Partitioned Systems of Differential Equations

We investigate strong stability preserving(SSP)implicit-explicit(IMEX)methods for partitioned systems of differential equations with stiff and nonstiff subsystems.Conditions for order p and stage order q=p are derived,and characterization of SSP IMEX methods is provided following the recent work by Spijker.Stability properties of these methods with respect to the decoupled linear system with a complex parameter,and a coupled linear system with real parameters are also investigated.Examples of methods up to the order p=4 and stage order q—p are provided.Numerical examples on six partitioned test systems confirm that the derived methods achieve the expected order of convergence for large range of stepsizes of integration,and they are also suitable for preserving the accuracy in the stiff limit or preserving the positivity of the numerical solution for large stepsizes.

建构主义的教学方法评析

以抛锚式教学、支架式教学和随机访问教学为代表的建构主义教学方法与传统的教学方法有本质的区别 ,它的理论基础是建构主义的教学观 ,适用于高级学习 ,在促进知识和学习能力的迁移方面更加有效。建构主义教学方法的广泛应用是教学方法发展的趋势 。

Rock mechanical problems and optimization for the long and deep diversion tunnels at Jinping Ⅱ hydropower station

According to site-specific environments such as high water pressures, high in-situ stresses and strong rockbursts, the design scheme of the long and deep diversion tunnels at Jinping II hydropower station was optimized to ensure construction safety. New drainage tunnels were considered. Furthermore, lining structures and grouting pressures were modified during the excavation of tunnels. The construction scheme was updated dynamically based on the complex geological conditions. For instances, the diversion tunnels were first excavated by drilling and blasting method at the first stage of construction, and then by the combination method of tunnel boring machine （TBM） and drilling and blasting, and finally by drilling and blasting method. Through optimized scheme and updated construction scheme, the excavation of diversion tunnel #1 was successfully completed in June, 2011. This paper summarizes the key issues in rock mechanics associated with the construction of the long and deep diversion tunnels at Jinping II hydropower station. The experiences of design and construction obtained from this project could provide reference to similar projects.