Three-Steps-Meshing Based Multiple Crack Identification for Structures and Its Experimental Studies

Multiple crack identification plays an important role in vibration-based crack identification of structures. Traditional crack detection method of single crack is difficult to be used in multiple crack diagnosis. A three-step-meshing method for the multiple cracks identification in structures is presented. Firstly, the changes in natural frequency of a structure with various crack locations and depth are accurately obtained by means of wavelet finite element method, and then the damage coefficient method is used to determine the number and the region of cracks. Secondly, different regions in the cracked structure are divided into meshes with different scales, and then the small unit containing cracks in the damaged area is gradually located by iterative computation. Lastly, by finding the points of intersection of three frequency contour lines in the small unit, the crack location and depth are identified. In order to verify the effectiveness of the presented method, a multiple cracks identification experiment is carried out. The diagnostic tests on a cantilever beam under two working conditions show the accuracy of the proposed method： with a maximum error of crack location identification 2.7% and of depth identification 5.2%. The method is able to detect multiple crack of beam with less subdivision and higher precision, and can be developed as a multiple crack detection approach for complicated structures.

Sandwich Structure-like Meshes Fabricated via Electrospinning for Controllable Release of Zoledronic Acid

Novel sandwich structure-like nanofiber multilayered meshes were fabricated via electrospinning. The purpose of the present work was to control zoledronic acid release via the novel structure of sandwich structure-like meshes. The in vitro release experiments reveal that the drug release speed and initial burst release were controllable by adjusting the thicknesses of electrospun barrier mesh and drug-loaded mesh. Compared with those of other drug delivery systems, the main advantages of the sandwich structure-like fiber meshes are facile preparation conditions and the generality for hydrophobic and hydrophilic pharmaceuticals.

PHYSICAL VALUE MAPPING ALGORITHM OF MESH IN FINE CAE ANALYSIS OF AUTOMOBILE BODY STRUCTURE

A physical value mapping （PVM） algorithm based on finite element mesh from the stamped part in stamping process to the product is presented, In order to improve the efficiency of the PVM algorithm, a search way from the mesh of the product to the mesh of the stamped part will be adopted. At the same time, the search process is divided into two steps： entire search （ES） and local search （LS）, which improve the searching efficiency. The searching area is enlarged to avoid missing projection elements in ES process. An arc-length method is introduced in LS process. The validity is confirmed by the results of the complex industry-forming product.

Mesh Size Effect in Numerical Simulation of Blast Wave Propagation and Interaction with Structures

Numerical method is popular in analysing the blast wave propagation and interaction with structures.However,because of the extremely short duration of blast wave and energy trans-mission between different grids,the numerical results are sensitive to the finite element mesh size.Previous numerical simulations show that a mesh size acceptable to one blast scenario might not be proper for another case,even though the difference between the two scenarios is very small,indicating a simple numerical mesh size convergence test might not be enough to guarantee accu-rate numerical results.Therefore,both coarse mesh and fine mesh were used in different blast scenarios to investigate the mesh size effect on numerical results of blast wave propagation and interaction with structures.Based on the numerical results and their comparison with field test re-sults and the design charts in TM5-1300,a numerical modification method was proposed to correct the influence of the mesh size on the simulated results.It can be easily used to improve the accu-racy of the numerical results of blast wave propagation and blast loads on structures.

Zooplankton community size-structure change and mesh size selection under the thermal stress caused by a power plant in a semi-enclosed bay

Zooplankton samples were collected using 505, 160 and 77 μm mesh nets around a power plant during four seasons in 2011. We measured total length of zooplankton and divided zooplankton into seven size classes in order to explore how zooplankton community size-structure might be altered by thermal discharge from power plant. The total length of zooplankton varied from 93.7 to 40 074.7 μm. The spatial distribution of mesozooplankton(200-2 000 μm) populations were rarely affected by thermal discharge, while macro-(2 000-10 000 μm)and megalo-zooplankton(>10 000 μm) had an obvious tendency to migrate away from the outfall of power plant.Thus, zooplankton community tended to become smaller and biodiversity reduced close to power plant.Moreover, we compared the zooplankton communities in three different mesh size nets. Species richness,abundance, evenness index and Shannon-Wiener diversity index of the 505 μm mesh size were significantly lower than those recorded from the 160 and 77 μm mesh size. Average zooplankton abundance was highest in the 77 μm mesh net((27 690.0±1 633.7) ind./m^3), followed by 160 μm mesh net((9 531.1±1 079.5) ind./m^3), and lowest in 505 μm mesh net((494.4±104.7) ind./m^3). The ANOSIM and SIMPER tests confirmed that these differences were mainly due to small zooplankton and early developmental stages of zooplankton. It is the first time to use the 77 μm mesh net to sample zooplankton in such an environment. The 77 μm mesh net had the overwhelming abundance of the copepod genus Oithona, as an order of magnitude greater than recorded for 160 μm mesh net and 100% loss through the 505 μm mesh net. These results indicate that the use of a small or even multiple sampling net is necessary to accurately quantify entire zooplankton community around coastal power plant.

Open Volumetric Mesh-An Efficient Data Structure for Tetrahedral and Hexahedral Meshes

This work introduces a scalable and efficient topological structure for tetrahedral and hexahedral meshes. The design of the data structure aims at maximal flexibility and high performance. It provides a high scalability by using hierarchical representa-tions of topological elements. The proposed data structure is array-based, and it is a compact representation of the half-edge data structure for volume elements and half-face data structure for volumetric meshes. This guarantees constant access time to the neighbors of the topological elements. In addition, an open-source implementation named Open Volumetric Mesh （OVM） of the pro-posed data structure is written in C＋＋ using generic programming concepts.

基于蜂窝结构的海上风电场无线Mesh网络覆盖优化算法

以往的海上风电场无线Mesh网络覆盖优化算法由于仅计算了单一的优化目标,导致算法的优化效果不佳。因此,设计了基于蜂窝结构的海上风电场无线Mesh网络覆盖优化算法。考虑到蜂窝结构的特性,得到基于蜂窝结构的海上风电场覆盖情况,根据覆盖区域中静态节点的分布情况,制定相应网络节点移动策略,在上述基础上,构建相应的风电场网络覆盖模型,并通过计算节点覆盖率和节点移动距离,得到相应的优化目标函数,通过计算移动节点的适应度,实现对风电场的网络覆盖优化。通过上述的设计,完成对海上风电场无线Mesh网络覆盖优化算法的设计。在实验测试中,和以往的海上风电场无线Mesh网络覆盖优化算法相比,设计的基于蜂窝结构的海上风电场无线Mesh网络覆盖优化算法在实际应用后,网络覆盖率提升到98.12%,优化效果较好。

Recent Advances in Space-Deployable Structures in China

Deployable space structure technology is an approach used in building spacecraft,especially when realizing deployment and folding functions.Once in orbit,the structures are released from the fairing,deployed,and positioned.With the development of communication,remote-sensing,and navigation satellites,space-deployable structures have become cutting-edge research topics in space science and technology.This paper summarizes the current research status and development trend of spacedeployable structures in China,including large space mesh antennas,space solar arrays,and deployable structures and mechanisms for deep-space exploration.Critical technologies of space-deployable structures are addressed from the perspectives of deployable mechanisms,cable-membrane form-finding,dynamic analysis,reliable environmental adaptability analysis,and validation.Finally,future technology developments and trends are elucidated in the fields of mesh antennas,solar arrays,deployable mechanisms,and on-orbit adjustment,assembly,and construction.

The ICM method with objective function transformed by variable discrete condition for continuum structure

ICM （Independent Continuous Mapping） method can solve topological optimization problems with the minimized weight as the objective and subjected to displacement constraints. To get a clearer topological configuration, by introducing the discrete condition of topological variables and integrating with the original objective, an optimal model with multi-objectives is formulated to make the topological variables approach 0 or 1 as near as possible, and the model reduces the effect of deleting rate on the result. The image-filtering method is employed to eliminate the checkerboard patterns and mesh dependence that occurred in the topology optimization of a continuum structure. The computational efficiency is enhanced through selecting quasi-active displacement constraints and a design region. Numerical examples indicate that this algorithm is robust and practicable, though the number of iterations is slightly increased with respect to the original algorithm.

Influence of structural damage on evaluation of microscopic pore structure in marine continental transitional shale of the Southern North China Basin:A method based on the low-temperature N2 adsorption experiment

Structural damage from sample preparation processes such as cutting and polishing may change the pore structure of rocks.However,changes in pore structure caused by this structural damage from crushing and its effect on marine continental transitional shale have not been well documented.The changes of microscopic pore structure in marine continental transitional shale during the sample preparation have important research value for subsequent exploration and development of shale gas.In this study,the pore structures of transitional shale samples from the Shanxi-Taiyuan Formation of the Southern North China Basin under different degrees of damage were analyzed through low-temperature N;adsorption experiments,combined with X-ray diffraction,total organic carbon,vitrinite reflectance analysis,and scanning electron microscopy.The results showed that(1)With increasing structural damage,the specific surface area(SSA)changed within relatively tight bounds,while the pore volume(PV)varied significantly,and the growth rate(maximum)exhibited a certain critical value with the crushing mesh number increasing from 20 to 200.(2)The ratio of SSA to PV can be used as a potential proxy for evaluating the influence of changes in the pore structure.(3)Correlation analysis revealed that the microscopic pore structure of marine continental transitional shale from the Shanxi-Taiyuan Formations is mainly controlled by organic matter and clay minerals.Clay minerals play a leading role in the development of microscopic pores and changes in pore structure.

ADAPTIVE FINITE ELEMENT METHOD FOR HIGH-SPEED FLOW-STRUCTURE INTERACTION

An adaptive finite element method for high-speed flow-structure interaction is pre- sented.The cell-centered finite element method is combined with an adaptive meshing technique to solve the Navier-Stokes equations for high-speed compressible flow behavior.The energy equation and the quasi-static structural equations for aerodynamically heated structures are solved by applying the Galerkin finite element method.The finite element formulation and computational procedure are de- scribed.Interactions between the high-speed flow,structural heat transfer,and deformation are studied by two applications of Mach 10 flow over an inclined plate,and Mach 4 flow in a channel.

Application of Computational Fluid Dynamics and Fluid Structure Interaction Techniques for Calculating the 3D Transient Flow of Journal Bearings Coupled with Rotor Systems

Journal bearings are important parts to keep the high dynamic performance of rotor machinery. Some methods have already been proposed to analysis the flow field of journal bearings, and in most of these methods simplified physical model and classic Reynolds equation are always applied. While the application of the general computational fluid dynamics （CFD）-fluid structure interaction （FSI） techniques is more beneficial for analysis of the fluid field in a journal bearing when more detailed solutions are needed. This paper deals with the quasi-coupling calculation of transient fluid dynamics of oil film in journal bearings and rotor dynamics with CFD-FSI techniques. The fluid dynamics of oil film is calculated by applying the so-called ＂dynamic mesh＂ technique. A new mesh movement approacb is presented while the dynamic mesh models provided by FLUENT are not suitable for the transient oil flow in journal bearings. The proposed mesh movement approach is based on the structured mesh. When the joumal moves, the movement distance of every grid in the flow field of bearing can be calculated, and then the update of the volume mesh can be handled automatically by user defined function （UDF）. The journal displacement at each time step is obtained by solving the moving equations of the rotor-bearing system under the known oil film force condition. A case study is carried out to calculate the locus of the journal center and pressure distribution of the journal in order to prove the feasibility of this method. The calculating results indicate that the proposed method can predict the transient flow field of a journal bearing in a rotor-bearing system where more realistic models are involved. The presented calculation method provides a basis for studying the nonlinear dynamic behavior of a general rotor-bearing system.

Dynamic Adaptive Finite Element Analysis of Acoustic Wave Propagation Due to Underwater Explosion for Fluid-structure Interaction Problems

在这份报纸，进附近的结构上的水和他们的效果里的远域爆炸波浪的繁殖的调查被执行。为远域结构，包围结构的液体的运动可以被假定小，允许管理液体方程的 linearization。这个问题的完全的分析必须在包围液体包含结构和爆炸波浪的繁殖的动态反应的同时的答案。在这研究，一个动态适应有限元素过程被建议。它到一个 2D 液体结构相互作用的解决方案的应用程序在时间域被调查。研究包括：一) 计算远地散布波浪由于在水下看情况时间的声学的波浪方程的爆炸包括答案， b ) 用联合 Euler-Lagrangian 途径的液体结构相互作用分析，和 c ) 适应有限元素过程采用错误估计，并且重新协调。时间的网孔改编被格子的本地新生基于压力功能的弯曲用时间依赖者错误指示物完成。作为结果，全面反应被一个动人的网孔更好比一个相等的一致网孔预言。另外，当精确性被改进时，为大问题的计算的费用被减少。

A NUMERICAL ANALYSIS ON TYPHOON ASYMMETRIC STRUCTUREAND MOTION

Five prediction experiments are carried out with two typhoons in 1992 using a limited -arca primitiveequations and two-way interactive model in a movable ,nested mesh. The result indicates good agreementin terms of motion between the prediction and observation. Studying the asymmetric structure in the cas-es selected, a close link is uncovered between the temporal evolutions of the structure and the track of motion in a tropical cyclone. Understanding of real asymmetric structure will help to improve the skill offorecasting tropical cyclones.

Numerical Simulation of the Solitary Wave Interacting with an Elastic Structure Using MPS-FEM Coupled Method

Fluid-Structure Interaction(FSI) caused by fluid impacting onto a flexible structure commonly occurs in naval architecture and ocean engineering. Research on the problem of wave-structure interaction is important to ensure the safety of offshore structures. This paper presents the Moving Particle Semi-implicit and Finite Element Coupled Method(MPS-FEM) to simulate FSI problems. The Moving Particle Semi-implicit(MPS) method is used to calculate the fluid domain, while the Finite Element Method(FEM) is used to address the structure domain. The scheme for the coupling of MPS and FEM is introduced first. Then, numerical validation and convergent study are performed to verify the accuracy of the solver for solitary wave generation and FSI problems. The interaction between the solitary wave and an elastic structure is investigated by using the MPS-FEM coupled method.

Influence of Heat Setting on Mechanical and Structural Properties of Polypropylene Hernia Mesh

Heat setting has important effects on mechanical and structural properties of polypropylene( PP) mesh. However,there is no systematic study on the effects of heat setting. In this paper,the orthogonal array was designed for heat setting,and the influences of heat setting on structural, mechanical properties and flexural rigidity of PP mesh were studied. The experimental results showed that temperature had larger influence than tension and time on thickness,tensile strength,bursting strength, tear strength and bending stiffness of PP meshes, except the fabric weight. The optimum heat setting parameters were as follows: temperature was120 ℃, time was 10 min,and tension was small. These results will provide guideline for the selection of heat setting parameters.

Fast SSED-MoM /FEM Analysis for Electromagnetic Scattering of Large-Scale Periodic Dielectric Structures

A hybrid method combining simplified sub-entire domain basis function method of moment with finite element method( SSED-MoM /FEM) is accelerated for electromagnetic( EM) scattering analysis of large-scale periodic structures.The unknowns are reduced sharply with non-uniform mesh in FEM. The computational complexity of the hybrid method is dramatically declined by applying conjugate gradient-fast Fourier transform( CG-FFT) to the integral equations of both electric field and magnetic field. The efficiency is further improved by using OpenMP technique. Numerical results demonstrate that the SSED-MoM /FEM method can be accelerated for more than three thousand times with large-scale periodic structures.

Smooth cutting pattern generation technique for membrane structures using geodesic line on subplane and spline interpolation

Practical techniques for smooth geodesic patterning of membrane structures were investigated.For the geodesic search,adjustment of the subplane of the extracted elements series was proposed,and various spline approximation methods were used to flatten the strip for the generation of a smooth pattern.This search approach is very simple,and the geodesic line could be easily attained by the proposed method without the need for a difficult computation method.Smooth cutting patterning can also be generated by spline approximation without the noise in discrete nodal information.Additionally,the geodesic cutting pattern saved about 21%of the required area for the catenary model due to the reduction of the curvature of the planar pattern seam line.

Efficient direction-independent fog harvesting using a corona discharge device with a multi-electrode structure

Efflcient collection of water from fog can effectively alleviate the problem of water shortages in foggy but water-scarce areas,such as deserts,islands and so on.Unlike inefflcient fog meshes,corona discharge can charge water droplets and further enhance the water-collecting effect.This study proposes a novel multi-electrode collecting structure that can achieve efflcient and direction-independent water collection from fog.The multi-electrode structure consists of three parts:a charging electrode,an intercepting electrode and a ground electrode.Four types of watercollecting structures are compared experimentally,and the collection rates from a traditional fog mesh,a wire-mesh electrode with fog coming from a high-voltage electrode,a wire-mesh electrode with fog coming from a ground electrode and a multi-electrode structure are 2–3 g h^(-1),100–120 g h^(-1),60–80 g h^(-1)and 200–220 g h^(-1),respectively.The collection rate of the multielectrode structure is 100–150 times that of a traditional fog mesh and 2–4 times that of a wiremesh electrode.These results demonstrate the superiority of the multi-electrode structure in fog collection.In addition,the motion equation of charged droplets in an electric fleld is also derived,and the optimization strategy of electrode spacing is also discussed.This structure can be applied not only to fog collection,but also to air puriflcation,factory waste gas treatment and other flelds.

Fully Nonlinear Simulation for Fluid/Structure Impact：A Review

这篇论文基于 inviscid 和 imcompressible 液体和无旋的流动在液体 / 结构影响上论述工作的评论。焦点在和边界元素方法(BEM ) 的速度潜力理论上。充分非线性的边界条件在未知免费表面和动人的身体的弄湿的表面上被强加。评论包括(1 ) 在常数或规定变化速度的身体的垂直、倾斜的水入口，以及免费秋天运动，(2 ) 液体微滴或列影响以及波浪影响身体，(3 ) 膨胀身体的类似答案。它盖住二维(2D ) ， axisymmetric 并且三维(3D ) 盒子。在数字模拟使用的关键技术被构画出，包括 multivalued 上的网孔产生免费表面，为扩展域的拉长的坐标系统，压力的相互的依赖和身体打手势的为去耦的辅助函数方法，并且为喷气或薄液体电影的处理在影响期间发展了。