This paper is a further study of two papers [1] and [2], which were related to Ill-Conditioned Load Flow Problems and were published by IEEE Trans. PAS. The authors of this paper have some different opinions, for exam...This paper is a further study of two papers [1] and [2], which were related to Ill-Conditioned Load Flow Problems and were published by IEEE Trans. PAS. The authors of this paper have some different opinions, for example, the 11-bus system is not an ill-conditioned system. In addition, a new approach to solve Load Flow Problems, E-ψtc, is introduced. It is an explicit method;solving linear equations is not needed. It can handle very tough and very large systems. The advantage of this method has been fully proved by two examples. The authors give this new method a detailed description of how to use it to solve Load Flow Problems and successfully apply it to the 43-bus and the 11-bus systems. The authors also propose a strategy to test the reliability, and by solving gradient equations, this new method can answer if the solution exists or not.展开更多
A universal expression for the transmitted power to the flexible foundation via the finite continuous isolation system of asymmetry is derived where the concept of effective mobility for the coupled system with con...A universal expression for the transmitted power to the flexible foundation via the finite continuous isolation system of asymmetry is derived where the concept of effective mobility for the coupled system with continuous contact points is put forward. On the basis of the theoretic calculation and analysis, effects of structure parameters of the system on the power flow transmission as well as on the isolation efficiency are fully investigated.展开更多
With the structure of two air gaps and two rotors, the electromagnetic continuously variable transmission（EMCVT） is a novel power-split continuously variable transmission（CVT）. There are two kinds of power flowing...With the structure of two air gaps and two rotors, the electromagnetic continuously variable transmission（EMCVT） is a novel power-split continuously variable transmission（CVT）. There are two kinds of power flowing through the EMCVT, one is mechanical power and the other is electric power. In the mean time, there are three power ports in the EMCVT, one is the outer rotor named mechanical power port and the other two are the inner rotor and the stator named electric power ports. The mechanical power port is connected to the driving wheels through the final gear and the electric ports are connected to the batteries through the transducers. The two kinds of power are coupled on the outer rotor of the EMCVT. The EMCVT can be equipped on the conventional vehicle being regarded as the CVT and it also can be equipped on the hybrid electric vehicle（HEV） as the multi-energy sources assembly. The power flows of these two kinds of applications are analysed. The back electromotive force（EMF） equations are illatively studied and so the dynamic mathematic model is theorized. In order to certify the feasibility of the above theories, three simulations are carried out in allusion to the above two kinds of mentioned applications of the EMCVT and a five speed automatic transmission（AT） vehicle. The simulation results illustrate that the efficiency of the EMCVT vehicles is higher than that of the AT vehicle owed to the optimized operation area of the engine. Hence the fuel consumption of the EMCVT vehicles is knock-down.展开更多
As the integration of distributed generations(DGs)transforms the traditional distribution network into the active distribution network,voltage stability assessments(VSA)of transmission grid and distribution grid are n...As the integration of distributed generations(DGs)transforms the traditional distribution network into the active distribution network,voltage stability assessments(VSA)of transmission grid and distribution grid are not suitable to be studied separately.This paper presents a distributed continuation power flow method for VSA of global transmission and distribution grid.Two different parameterization schemes are adopted to guarantee the coherence of load growth in transmission and distribution grids.In the correction step,the boundary bus voltage,load parameter and equivalent power are communicated between the transmission and distribution control centers to realize the distributed computation of load margin.The optimal multiplier technique is used to improve the convergence of the proposed method.The three-phase unbalanced characteristic of distribution networks and the reactive capability limits of DGs are considered.Simulation results on two integrated transmission and distribution test systems show that the proposed method is effective.展开更多
Based on an exact CAD model of hydro-mechanical continuously variable transmission （HMCVT） gearbox which can transmit 180 horsepower, virtual prototype of the HMCVT was built. Revolution speed of shafts, gears and c...Based on an exact CAD model of hydro-mechanical continuously variable transmission （HMCVT） gearbox which can transmit 180 horsepower, virtual prototype of the HMCVT was built. Revolution speed of shafts, gears and clutches of the HMCVT were calibrated by using results obtained by theoretical calculation and test methods. The needed power and torques of both mechanical power input shaft and hydropower input shaft were calculated by simulation. Hydraulic power distributing ratio and power flow of the system was also studied. The analysis results showed that cycle power was produced inevitably when the output shaft speed of HMCVT change smoothly during mechanical and hydraulic working state HM1 to HM4, and the instantaneous maximum cycle power was 39.5%. Then the overall transmission efficiency of HMCVT was studied, and the maximum overall efficiency of the system was about 87%. The results of the studies gave references to select suited engine and variable displacement pump for the HMCVT, and to develop rational speed control strategies for the HMCVT by changing displacement ratio of variable displacement pump.展开更多
The continuation power flow method combined with the Jacobi-Davidson method is presented to trace the critical eigenvalues for power system small signal stability analysis. The continuation power flow based on a predi...The continuation power flow method combined with the Jacobi-Davidson method is presented to trace the critical eigenvalues for power system small signal stability analysis. The continuation power flow based on a predictor- corrector technique is applied to evaluate a continuum of steady state power flow solutions as system parameters change;meanwhile, the critical eigenvalues are found by the Jacobi-Davidson method, and thereby the trajectories of the critical eigenvalues, Hopf bifurcation and saddle node bifurcation points can also be found by the proposed method. The numerical simulations are studied in the IEEE 30-bus test system.展开更多
连续潮流法(continuation power flow,CPF)是静态电压稳定分析的一个基本工具。针对常规连续潮流法在处理不平衡功率上的不足,建立基于动态潮流方程的连续潮流模型,称之为动态连续潮流模型(dynamic continuation power flow,DCPF)。作...连续潮流法(continuation power flow,CPF)是静态电压稳定分析的一个基本工具。针对常规连续潮流法在处理不平衡功率上的不足,建立基于动态潮流方程的连续潮流模型,称之为动态连续潮流模型(dynamic continuation power flow,DCPF)。作为一种系统化的方法,DCPF合理地分配了系统不平衡功率,解决了常规连续潮流计算结果依赖于平衡节点选择的问题,提高了电压稳定评估的精度。IEEE-39节点和实际省级电网的算例结果表明:动态连续潮流模型计算结果不依赖于平衡节点的选择,计算速度可满足在线运行的需要。展开更多
连续潮流(continuous power flow,CPF)是电力系统电压稳定分析的有效工具,也是解决常规潮流中病态潮流问题的方法之一。针对无平衡节点孤岛运行微电网系统的无平衡节点、且有下垂控制分布式电源装置的特性,提出一种无平衡节点孤岛运行...连续潮流(continuous power flow,CPF)是电力系统电压稳定分析的有效工具,也是解决常规潮流中病态潮流问题的方法之一。针对无平衡节点孤岛运行微电网系统的无平衡节点、且有下垂控制分布式电源装置的特性,提出一种无平衡节点孤岛运行微电网CPF计算方法。采用不要求雅可比矩阵非奇异,且具有全局收敛性的LM-TR方法求解初始点。预测环节采用结合局部参数化方法的切线法。校正环节提出新型的超球面参数化方法,并采用结合传统牛顿法和带Armijo型线性搜索牛顿法的组合牛顿法进行校正,以保证CPF校正计算成功,及实现整个CPF过程中在较高计算精度下一直采用较大定步长预测。对改造后的37节点和17节点无平衡节点孤岛运行微电网系统采用所提方法进行CPF计算,验证了其正确性和有效性。展开更多
文摘This paper is a further study of two papers [1] and [2], which were related to Ill-Conditioned Load Flow Problems and were published by IEEE Trans. PAS. The authors of this paper have some different opinions, for example, the 11-bus system is not an ill-conditioned system. In addition, a new approach to solve Load Flow Problems, E-ψtc, is introduced. It is an explicit method;solving linear equations is not needed. It can handle very tough and very large systems. The advantage of this method has been fully proved by two examples. The authors give this new method a detailed description of how to use it to solve Load Flow Problems and successfully apply it to the 43-bus and the 11-bus systems. The authors also propose a strategy to test the reliability, and by solving gradient equations, this new method can answer if the solution exists or not.
基金This project is supported by National Natural Science Foundation of China (No.59975053)
文摘A universal expression for the transmitted power to the flexible foundation via the finite continuous isolation system of asymmetry is derived where the concept of effective mobility for the coupled system with continuous contact points is put forward. On the basis of the theoretic calculation and analysis, effects of structure parameters of the system on the power flow transmission as well as on the isolation efficiency are fully investigated.
基金supported by National Natural Science Foundation of China(No.50605020)Guangdong Provincial Science and Technology Project of China(No.2006A10501001).
文摘With the structure of two air gaps and two rotors, the electromagnetic continuously variable transmission（EMCVT） is a novel power-split continuously variable transmission（CVT）. There are two kinds of power flowing through the EMCVT, one is mechanical power and the other is electric power. In the mean time, there are three power ports in the EMCVT, one is the outer rotor named mechanical power port and the other two are the inner rotor and the stator named electric power ports. The mechanical power port is connected to the driving wheels through the final gear and the electric ports are connected to the batteries through the transducers. The two kinds of power are coupled on the outer rotor of the EMCVT. The EMCVT can be equipped on the conventional vehicle being regarded as the CVT and it also can be equipped on the hybrid electric vehicle（HEV） as the multi-energy sources assembly. The power flows of these two kinds of applications are analysed. The back electromotive force（EMF） equations are illatively studied and so the dynamic mathematic model is theorized. In order to certify the feasibility of the above theories, three simulations are carried out in allusion to the above two kinds of mentioned applications of the EMCVT and a five speed automatic transmission（AT） vehicle. The simulation results illustrate that the efficiency of the EMCVT vehicles is higher than that of the AT vehicle owed to the optimized operation area of the engine. Hence the fuel consumption of the EMCVT vehicles is knock-down.
基金This work is supported by National Natural Science Foundation of China(No.51077042,No.51577049)Special Foundation of The doctoral program of Higher Education(No.20120094110008).
文摘As the integration of distributed generations(DGs)transforms the traditional distribution network into the active distribution network,voltage stability assessments(VSA)of transmission grid and distribution grid are not suitable to be studied separately.This paper presents a distributed continuation power flow method for VSA of global transmission and distribution grid.Two different parameterization schemes are adopted to guarantee the coherence of load growth in transmission and distribution grids.In the correction step,the boundary bus voltage,load parameter and equivalent power are communicated between the transmission and distribution control centers to realize the distributed computation of load margin.The optimal multiplier technique is used to improve the convergence of the proposed method.The three-phase unbalanced characteristic of distribution networks and the reactive capability limits of DGs are considered.Simulation results on two integrated transmission and distribution test systems show that the proposed method is effective.
基金The authors acknowledge the support of Project supported by recommend international advanced agricultural science and technology plan of Ministry of Agriculture of China （Grant No. 2010-Z18）, and the National Natural Science Foundation of China （Grant No. 51275249）.
文摘Based on an exact CAD model of hydro-mechanical continuously variable transmission （HMCVT） gearbox which can transmit 180 horsepower, virtual prototype of the HMCVT was built. Revolution speed of shafts, gears and clutches of the HMCVT were calibrated by using results obtained by theoretical calculation and test methods. The needed power and torques of both mechanical power input shaft and hydropower input shaft were calculated by simulation. Hydraulic power distributing ratio and power flow of the system was also studied. The analysis results showed that cycle power was produced inevitably when the output shaft speed of HMCVT change smoothly during mechanical and hydraulic working state HM1 to HM4, and the instantaneous maximum cycle power was 39.5%. Then the overall transmission efficiency of HMCVT was studied, and the maximum overall efficiency of the system was about 87%. The results of the studies gave references to select suited engine and variable displacement pump for the HMCVT, and to develop rational speed control strategies for the HMCVT by changing displacement ratio of variable displacement pump.
文摘The continuation power flow method combined with the Jacobi-Davidson method is presented to trace the critical eigenvalues for power system small signal stability analysis. The continuation power flow based on a predictor- corrector technique is applied to evaluate a continuum of steady state power flow solutions as system parameters change;meanwhile, the critical eigenvalues are found by the Jacobi-Davidson method, and thereby the trajectories of the critical eigenvalues, Hopf bifurcation and saddle node bifurcation points can also be found by the proposed method. The numerical simulations are studied in the IEEE 30-bus test system.
文摘连续潮流法(continuation power flow,CPF)是静态电压稳定分析的一个基本工具。针对常规连续潮流法在处理不平衡功率上的不足,建立基于动态潮流方程的连续潮流模型,称之为动态连续潮流模型(dynamic continuation power flow,DCPF)。作为一种系统化的方法,DCPF合理地分配了系统不平衡功率,解决了常规连续潮流计算结果依赖于平衡节点选择的问题,提高了电压稳定评估的精度。IEEE-39节点和实际省级电网的算例结果表明:动态连续潮流模型计算结果不依赖于平衡节点的选择,计算速度可满足在线运行的需要。
文摘连续潮流(continuous power flow,CPF)是电力系统电压稳定分析的有效工具,也是解决常规潮流中病态潮流问题的方法之一。针对无平衡节点孤岛运行微电网系统的无平衡节点、且有下垂控制分布式电源装置的特性,提出一种无平衡节点孤岛运行微电网CPF计算方法。采用不要求雅可比矩阵非奇异,且具有全局收敛性的LM-TR方法求解初始点。预测环节采用结合局部参数化方法的切线法。校正环节提出新型的超球面参数化方法,并采用结合传统牛顿法和带Armijo型线性搜索牛顿法的组合牛顿法进行校正,以保证CPF校正计算成功,及实现整个CPF过程中在较高计算精度下一直采用较大定步长预测。对改造后的37节点和17节点无平衡节点孤岛运行微电网系统采用所提方法进行CPF计算,验证了其正确性和有效性。
