Cyclostationary signature design for common control channel of cognitive radio

Embedding specific signatures in transmitted signals for identifying common control channels of cognitive radio are addressed in research laboratories because availability of the spectrum occupied by the common control channel might change in time. A novel solution to embed a unique cyclostationary signature for the common control channel of cognitive radio is proposed in this article. Based on linear periodically time-variant transformation （LPTV） model, the cyclic autocorrelation expression of the proposed signature is derived, which characterizes its cyclostationarity. Analysis of the cyclostationary signature is presented considering effects of additive white Gaussian noise （AWGN） and multiplath channels. Simulation results illustrating the reliability of signatures are given.

Optimized in-band control channel with channel selection scheduling and network coding in distributed cognitive radio networks

This article proposes an optimized in-band control channel scheme with channel selection scheduling algorithm and network coding based transmission paradigm in the distributed cognitive radio network （CRN）. As well known, control channel plays an important role for establishment of wireless transmission. In order to improve spectrum efficiency in CRN, control channel is preferred to be deployed without dedicated spectrum allocation, i.e. the in-band way. In this study, the time slot division and dynamic channel selection scheduling algorithm is proposed to realize the in-band control channel with improved spectrum efficiency in the distributed CRN. Furthermore, to adapt to dynamic behavior of the primary users, network coding technology is employed to optimize the overhead of control information transmission so that the control information can be efficiently and reliably transmitted. The performance of the proposed in-band control channel scheme is verified by the extensive simulation results.

Power control and channel allocation optimization game algorithm with low energy consumption for wireless sensor network

In a wireless sensor network （WSN）, the energy of nodes is limited and cannot be charged. Hence, it is necessary to reduce energy consumption. Both the transmission power of nodes and the interference among nodes influence energy consumption. In this paper, we design a power control and channel allocation game model with low energy consumption （PCCAGM）. This model contains transmission power, node interference, and residual energy. Besides, the interaction between power and channel is considered. The Nash equilibrium has been proved to exist. Based on this model, a power control and channel allocation optimization algorithm with low energy consumption （PCCAA） is proposed. Theoretical analysis shows that PCCAA can converge to the Pareto Optimal. Simulation results demonstrate that this algorithm can reduce transmission power and interference effectively. Therefore, this algorithm can reduce energy consumption and prolong the network lifetime.

Mechanism of controlling turbulent channel flow with the effect of spanwise Lorentz force distribution

A direct numerical simulation（DNS） is performed to investigate the control effect and mechanism of turbulent channel flow with the distribution of spanwise Lorentz force. A sinusoidal distribution of constant spanwise Lorentz force is selected, of which the control effects, such as flow characters, mean Reynolds stress, and drag reductions, at different parameters of amplitude A and wave number k_x are discussed. The results indicate that the control effects vary with the parameter A and k_x. With the increase of A, the drag reduction rate D_r first increases and then decreases rapidly at low k_x,and slowly at high k_x. The low drag reduction（or even drag increase） is due to a weak suppression or even the enhancements of the random velocity fluctuation and mean Reynolds stress. The efficient drag reduction is due to the quasi-streamwise vortex structure induced by Lorentz force, which contributes to suppressing the random velocity fluctuation and mean Reynolds stress, and the negative vorticity improves the distribution of streamwise velocity. Therefore, the optimal control effect with a drag reduction of up to 58% can be obtained.

H-infinity performance optimization for networked control systems with limited communication channels

This paper studies the problems of H-infinity performance optimization and controller design for continuous-time NCSs with both sensor-to-controller and controller-to-actuator communication constraints （limited communication channels）. By taking the derivative character of network-induced delay into full consideration and defining new Lyapunov functions, linear matrix inequalities （LMIs）-based H-infinity performance optimization and controller design are presented for NCSs with limited communication channels. If there do not exist any constraints on the communication channels, the proposed design methods are also applicable. The merit of the proposed methods lies in their Jess conservativeness, which is achieved by avoiding the utilization of bounding inequalities for cross products of vectors. The simulation results illustrate the merit and effectiveness of the proposed H-infinity controller design for NCSs with limited communication channels.

Beacon-driven Leader Based Protocol over a GE Channel for MAC Layer Multicast Error Control

In wireless networks current standard MAC layer protocols don’t provide any error correction scheme for broadcast/multicast. In this paper, we enhance a Leader Based Protocol (LBP) and propose a Beacon-driven Leader Based Protocol (BLBP) for the MAC layer multicast error control. To guarantee a very low Packet Loss Ratio (PLR) under strict delay constraints for video multicast over a Gilbert-Elliott (GE) channel, we analyze BLBP and compare it with LBP and different application layer multicast error control schemes via simulation experiments. Both the theoretical analysis and simulation results show that BLBP can correct nearly all the errors for all receivers in the MAC layer and is more efficient than LBP. BLBP is also more efficient than the application layer Automatic Repeat request (ARQ) scheme and the total multicast delay is much shorter. BLBP is very good for real-time multicast applications with strict delay constraints.

Characteristics of mining gas channel expansion in the remote overlying strata and its control of gas flow

The technology of pressure relief gas drainage is one of the most effective and economic for preventing gas emissions in underground mines.Based on current understanding of strata breakage and fracture development in overlying strata,the current study divides the overlying strata into the following three longitudinal zones in terms of the state of gas flow:a turbulent channel zone,a transitional circulation channel zone and a seepage channel zone.According to the key strata discrimination theory of controlling the overlying strata,the calculation method establishes that the step-type expansion of the mining gas channel corresponds to the advancing distance of working face,and this research also confrms the expanding rule that the mining gas channel in overlying strata follows the advancing distance of mining working face.Based on the geological conditions of Xinjing Coal Mine of Yangquan,this paper researches the expanding rule of mining gas channel as well as the control action of the channel acting on the pressure relief flow under the condition of the remote protective layer,and got the distance using inversion that the step-type expanding of mining gas channel is corresponding to the advancing distance of working face,which verifes the accuracy and feasibility of theoretical calculation method proposed in this study.The research provides the theoretical basis for choosing the technology of pressure relief gas drainage and designing the parameters of construction.

Channel adaptive rate control for energy optimization

Low energy consumption is one of the main challenges for wireless video transmission on battery limited devices. The energy invested at the lower layers of the protocol stack involved in data communication, such as link and physical layer, represent an important part of the total energy consumption. This communication energy highly depends on the channel conditions and on the transmission data rate. Traditionally, video coding is unaware of varying channel conditions. In this paper, we propose a cross-layer approach in which the rate control mechanism of the video codec becomes channel-aware and steers the instantaneous output rate according to the channel conditions to reduce the communication energy. Our results show that energy savings of up to30% can be obtained with a reduction of barely 0.1 dB on the average video quality. The impact of feedback delays is shown to be small. In addition, this adaptive mechanism has low complexity, which makes it suitable for real-time applications.

Numerical study of the turbulent channel flow under space-dependent electromagnetic force control at different Reynolds numbers

In this paper, the control of turbulent channel flow by space-dependent electromagnetic force and the mechanism of drag reduction are investigated with the direct numerical simulation(DNS) methods for different Reynolds numbers. A formulation is derived to express the relation between the drag and the Reynolds shear stress. With the application of optimal electromagnetic force, the in-depth relations among characteristic structures in the flow field, mean Reynolds shear stress, and the effect of drag reduction for different Reynolds numbers are discussed. The results indicate that the maximum drag reductions can be obtained with an optimal combination of parameters for each case of different Reynolds numbers. The regular quasi-streamwise vortex structures, which appear in the flow field, have the same period with that of the electromagnetic force.These structures suppress the random velocity fluctuations, which leads to the absolute value of mean Reynolds shear stress decreasing and the distribution of that moving away from the wall. Moreover, the wave number of optimal electromagnetic force increases,and the scale of the regular quasi-streamwise vortex structures decreases as the Reynolds number increases. Therefore, the rate of drag reduction decreases with the increase in the Reynolds number since the scale of the regular quasi-streamwise vortex structures decreases.

Transient response of enstrophy transport to opposition control in turbulent channel flow

The transient response of the turbulent enstrophy transport to opposition control in the turbulent channel flow is studied with the aid of direct numerical simulation. It is found that the streamwise enstrophy and the spanwise enstrophy are suppressed by the attenuation of the stretching terms at first, while the vertical enstrophy is reduced by inhibiting the tilt of the mean shear. In the initial period of the control, the streamwise enstrophy evolves much slower than the other two components. The vertical vorticity component exhibits a rapid monotonic decrease and also plays an important role in the attenuation of the other two components.

Causes and typical control model of wind-drift sandy lands in abandoned channel of the Yellow River

The historical formation and development of the abandoned channel of the Yellow River is reviewed and its causes of formation and present condition of prevention and control are analyzed in this paper. Based on this analysis, some ideas about control, critical problems and countermeasures in the next period are proposed with two typical control models as examples. We suggest that in preventing and controlling the wind-drift sandy lands in the region, the emphasis should be to develop, with a greatly expanded effort, a recycling economy. This should realize a combination of two ideas, i.e. integrate combating desertification with a structural adjustment of agricultural and an increase in the income of farmers.

Distribution Patterns of Remaining Hydrocarbons Controlled by Reservoir Architecture of Distributary Channel with Different Channel Style: S2 Formation of Songliao Basin, China

1 Introduction Reservoir architecture analysis of distributary channel of Daqing oilfield has drawn consistent interest among development geologists and petroleum engineers over the last decade(Lv et al.,1999;Zhou et al.,2008;Zhang et

Optimal source rate control for adapting VBR video over CBR channels

In this paper we discuss the source rate control problem of adapting variable bit-rate （VBR） compressed video over constant bit-rate （CBR） channels. Firstly we formulate it as an optimal control problem of a discrete linear system with state and control constraints. Then we apply the discrete maximum principle to get the optimal solution. Experimental results are given in the end. Compared with traditional algorithms, the proposed algorithm is suitable for the coder with continuous output rates, and can achieve the better solution. Our algorithm can be used in both off-line and on-line coding.

Fine Single Channel Identification Controlled by Sedimentary Facies—Taking KLA Oilfield as an Example

The Neogene fluvial reservoir in the Bohai oilfield is one of the leading development horizons for increasing reserves and production in the Bohai oilfield. However, the development of offshore fluvial reservoirs is faced with the problems of thin reservoir thickness, narrow plane width, rapid lateral change, and thin well pattern. Taking the KLA oilfield as an example, this paper discusses the nuanced characterization and configuration of a single channel controlled by sedimentary facies to guide developing offshore river facies’ narrow channel main control oilfield. Firstly, based on a large number of core data, the acceptable sedimentary facies identification is realized, the sedimentary model of the study area is established, the delicate calibration of logging facies and seismic facies is realized under the constraint of the sedimentary model, and a set of technical methods for nuanced reservoir characterization guided by seismic sedimentology is summarized, to realize the boundary identification of composite channel configuration and further realize the nuanced characterization of the single narrow channel. Based on this set of technology, it guides the smooth implementation of horizontal wells in the oilfield. The drilling encounter rate of the reservoir in the horizontal section of the single well exceeds 90%, ensuring the injection production connectivity and increasing the reserve production rate by more than 10%.

CO_2-triggered gelation for mobility control and channeling blocking during CO_2 flooding processes

CO2 flooding is regarded as an important method for enhanced oil recovery （EOR） and greenhouse gas control. However, the heterogeneity prevalently dis- tributed in reservoirs inhibits the performance of this technology. The sweep efficiency can be significantly reduced especially in the presence of ＂thief zones＂. Hence, gas channeling blocking and mobility control are important technical issues for the success of CO2 injection. Normally, crosslinked gels have the potential to block gas channels, but the gelation time control poses challenges to this method. In this study, a new method for selectively blocking CO2 channeling is proposed, which is based on a type of CO2-sensitive gel system （modified polyacry- lamide-methenamine-resorcinol gel system） to form gel in situ. A CO2-sensitive gel system is when gelation or solidification will be triggered by CO2 in the reservoir to block gas channels. The CO2-sensitivity of the gel system was demonstrated in parallel bottle tests of gel in N2 and CO2 atmospheres. Sand pack flow experiments were con- ducted to investigate the shutoff capacity of the gel system under different conditions. The injectivity of the gel system was studied via viscosity measurements. The results indi- cate that this gel system was sensitive to CO2 and had good performance of channeling blocking in porous media. Advantageous viscosity-temperature characteristics were achieved in this work. The effectiveness for EOR in heterogeneous formations based on this gel system was demonstrated using displacement tests conducted in double sand packs. The experimental results can provide guideli- nes for the deployment of theCO2-sensitive gel system for field applications.

DC Emergency Power Control Strategy for AC/DC Multi-Channel Interconnected System

Inter-regional transmission line fault often results in power flow transferring, tie-line overloading and system islanding. Traditional control methods such asgenerator tripping and load shedding are costly, and also have undesirable impacts on theloadside. In this paper, a new emergency power control strategy is proposed for multi-channel interconnected system by using the overload capacity of non-fault DC lines. First of all, the capacity of emergency power control can be acquired by critical transmission power of a certain tie-line for stability. Secondly, the shortest electric distance can be calculated by Dijkstra algorithm, and then the priority of emergency control of the DC lines can be obtained by the entropy weight method. When the inter-regional transmission power decreases and the effect of single DC line emergency control is poor, the multi-channel cooperative emergency control strategy is proposed to ensure the system stability. Simulation results verify the effectiveness of the method proposed.

A Dual-Channel Secure Transmission Scheme for Internet-Based Networked Control Systems

Two significant issues in Internet-based networked control systems （ INCSs）, transport performance of different protocols and security breach from Internet side, are investigated. First, for improving the performance of data transmission, user datagram protocol （UDP） is adopted as the main stand for controllers and plants using INCSs. Second, a dual-channel secure transmission scheme （DCSTS）based on data transmission characteristics of INCSs is proposed, in which a raw UDP channel and a secure TCP （transmission control protocol） connection making use of SSL/TLS （secure sockets layer/transport layer security） are included. Further, a networked control protocol （NCP） at application layer for supporting DCSTS between the controllers and plants in INCSs is designed, and it also aims at providing a universal communication mechanism for interoperability of devices among the networked control laboratories in Beijing Institute of Technology of China, Central South University of China and Tokyo University of Technology of Japan. By means of a networked single-degree-of-free- dom robot arm, an INCS under the new protocol and security environment is created. Compared with systems such as IPSec or SSL/TLS, which may cause more than 91% network throughput deduction, the new DCSTS protocol may yield results ten times better, being just 5.67%.

Analysis and Application of Covert Channels of Internet Control Message Protocol

Based on the analysis of the covert channel＇s working mechanism of the internet control message protocol （ICMP） in internet protocol version 4 （IPv4） and Internet Protocol version 6 （IPv6）, the ICMP covert channd＇s algorithms of the IPv4 and IPv6 are presented, which enable automatic channeling upon IPv4/v6 nodes with non-IPv4-compatible address, and the key transmission is achieved by using this channel in the embedded Internet terminal. The result shows that the covert channel＇s algorithm, which we implemented if, set correct, the messages of this covert channel might go through the gateway and enter the local area network.

一种基于Polar译码度量选择的第三方高效PDCCH盲检方法

为研究和设计面向第三方场景的高效盲检方法,提出了一种基于Polar译码度量选择的第三方高效PDCCH盲检方法,其技术路线包括Polar译码算法与物理的下行控制信道(PDCCH)盲检算法2个板块.基于Polar译码盲检算法,引入一种基于下行控制信息(DCI)长度的Polar译码度量,提出了改进的基于Polar译码度量选择的第三方盲检方法.基于PDCCH盲检算法,引入一种重排序盲检算法.将改进的Polar译码算法与重排序盲检算法有机结合,提出面向第三方场景的高效PDCCH盲检方法.基于MATLAB平台搭建5G PDCCH盲检仿真链路,对所提方法进行验证与分析.结果表明,该方法能够同时有效减小PDCCH盲检次数与DCI候选长度数量,在保证目标捕获准确率的前提下提高盲检效率.

含静止无功发生器的直驱风电并网系统稳定性分析及振荡抑制策略

风电并网系统稳定性分析及振荡抑制策略大多集中于风电场本身,针对含静止无功发生器(SVG)的直驱风电并网系统研究较少。基于特征值灵敏度筛选出对含SVG的直驱风电并网系统稳定性较显著的控制通道,然后基于独立通道分析设计理论将并网系统由多输入多输出耦合系统等效拆分为多个单输入单输出控制通道,在定性分析并网系统稳定性的同时定量评估不同控制通道间的交互作用程度。为抑制控制通道间的交互作用,提出了基于H∞鲁棒控制的次同步振荡抑制策略。通过电磁暂态仿真,验证了基于独立通道分析设计理论分析并网系统稳定性的正确性以及基于H∞鲁棒控制的次同步振荡抑制策略的有效性。