RECOVERY A POSTERIORI ERROR ESTIMATES FOR GENERAL CONVEX ELLIPTIC OPTIMAL CONTROL PROBLEMS SUBJECT TO POINTWISE CONTROL CONSTRAINTS

Superconvergence and recovery a posteriori error estimates of the finite element ap- proximation for general convex optimal control problems are investigated in this paper. We obtain the superconvergence properties of finite element solutions, and by using the superconvergence results we get recovery a posteriori error estimates which are asymptotically exact under some regularity conditions. Some numerical examples are provided to verify the theoretical results.

SEQUENTIAL QUADRATIC PROGRAMMING METHODS FOR OPTIMAL CONTROL PROBLEMS WITH STATE CONSTRAINTS

A kind of direct methods is presented for the solution of optimal control problems with state constraints. These methods are sequential quadratic programming methods. At every iteration a quadratic programming which is obtained by quadratic approximation to Lagrangian function and linear approximations to constraints is solved to get a search direction for a merit function. The merit function is formulated by augmenting the Lagrangian function with a penalty term. A line search is carried out along the search direction to determine a step length such that the merit function is decreased. The methods presented in this paper include continuous sequential quadratic programming methods and discreate sequential quadratic programming methods.

New model reference adaptive control with input constraints

A new scheme of adaptive control is proposed for a class of linear time-invariant（ LTI） dynamical systems,especially in aerospace,with matched parametric uncertainties and input constraints. Based on a typical and conventional direct model reference adaptive control scheme,various modifications have been employed to achieve the goal. ＂C omposite model reference adaptive control＂of higher performance is seam-lessly combined with ＂positive μ-mod＂,which consequently results in a smooth tracking trajectory despite of the input constraints. In addition,bounded-gain forgetting is utilized to facilitate faster convergence of parameter estimates. The stability of the closed-loop systemcan be guaranteed by using Lyapunov theory.The merits and effectiveness of the proposed method are illustrated by a numerical example of the longitudinal dynamical systems of a fixed-wing airplane.

OPTIMAL CONTROL OF A POPULATION DYNAMICS MODEL WITH HYSTERESIS

This paper addresses a nonlinear partial differential control system arising in population dynamics.The system consist of three diffusion equations describing the evolutions of three biological species:prey,predator,and food for the prey or vegetation.The equation for the food density incorporates a hysteresis operator of generalized stop type accounting for underlying hysteresis effects occurring in the dynamical process.We study the problem of minimization of a given integral cost functional over solutions of the above system.The set-valued mapping defining the control constraint is state-dependent and its values are nonconvex as is the cost integrand as a function of the control variable.Some relaxationtype results for the minimization problem are obtained and the existence of a nearly optimal solution is established.

Time-varying Sliding Mode Controls in Rigid Spacecraft Attitude Tracking

To solve the problem of attitude tracking of a rigid spacecraft with an either known or measurable desired attitude trajectory, three types of time-varying sliding mode controls are introduced under consideration of control input constraints. The sliding surfaces of the three types initially pass arbitrary initial values of the system, and then shift or rotate to reach predetermined ones. This way, the system trajectories are always on the sliding surfaces, and the system work is guaranteed to have robustness against parameter uncertainty and external disturbances all the time. The controller parameters are optimized by means of genetic algorithm to minimize the index consisting of the weighted index of squared error （ISE） of the system and the weighted penalty term of violation of control input constraint. The stability is verified with Lyapunov method. Compared with the conventional sliding mode control, simulation results show the proposed algorithm having better robustness against inertia matrix uncertainty and external disturbance torques.

Stability of singular networked control systems with control constraint

Based on bounded network-induced time-delay, the networked control system is modeled as a linear time-variant singular system. Using the Lyapunov theory and the linear matrix inequality approach, the criteria for delay-independent stability and delay-dependent stability of singular networked control systems are derived and transformed to a feasibility problem of linear matrix inequality formulation, which can be solved by the Matlab LMI toolbox, and the feasible solutions provide the maximum allowable delay bound that makes the system stable. A numerical example is provided, which shows that the analysis method is valid and the stability criteria are feasible.

Stable MIMO Constrained Predictive Control with Steadystate Objective Optimization

A two-stage multi-objective optimization model-predictive control algorithms(MPC) strategy is presented. A domain MPC controller with input constraints is used to increase freedom for steady-state objective and enhance stabilization of the controller. A steady-state objective optimization algorithm oriented to transient process is adopted to realize optimization of objectives else than dynamic control. It is proved that the stabilization for both dynamic control and steady-state objective optimization can be guaranteed. The theoretical results are demonstrated and discussed using a distillation tower as the model. Theoretical analysis and simulation results show that this control strategy is efficient and provides a good strategic solution to practical process control.

Effectiveness of a Passive-active Vibration Isolation System with Actuator Constraints

In the prediction of active vibration isolation performance, control force requirements were ignored in previous work. This may limit the realization of theoretically predicted isolation performance if control force of large magnitude cannot be supplied by actuators.The behavior of a feed-forward active isolation system subjected to actuator output constraints is investigated. Distributed parameter models are developed to analyze the system response, and to produce a transfer matrix for the design of an integrated passive-active isolation system. Cost functions comprising a combination of the vibration transmission energy and the sum of the squared control forces are proposed. The example system considered is a rigid body connected to a simply supported plate via two passive-active isolation mounts. Vertical and transverse forces as well as a rotational moment are applied at the rigid body, and resonances excited in elastic mounts and the supporting plate are analyzed. The overall isolation performance is evaluated by numerical simulation. The simulation results are then compared with those obtained using unconstrained control strategies. In addition, the effects of waves in elastic mounts are analyzed. It is shown that the control strategies which rely on tmconstrained actuator outputs may give substantial power transmission reductions over a wide frequency range, but also require large control force amplitudes to control excited vibration modes of the system. Expected power transmission reductions for modified control strategies that incorporate constrained actuator outputs are considerably less than typical reductions with unconstrained actuator outputs. In the frequency range in which rigid body modes are present, the control strategies can only achieve 5-10 dB power transmission reduction, when control forces are constrained to be the same order of the magnitude as the primary vertical force. The resonances of the elastic mounts result in a notable increase of power transmission in high frequency range and cannot be attenuated by active control. The investigation provides a guideline for design and evaluation of active vibration isolation systems.

Trust-region based instantaneous optimal semi-active control of long-span spatially extended structures with MRF-04K damper

In the field of civil engineering, magnetorheological fluid （MRF） damper-based semi-active control systems have received considerable attention for use in protecting structures from natural hazards such as strong earthquakes and high winds. In this paper, the MRF damper-based semi-active control system is applied to a long-span spatially extended structure and its feasibility is discussed. Meanwhile, a _trust-region method based instantaneous optimal semi-active control algorithm （TIOC） is proposed to improve the performance of the semi-active control system in a multiple damper situation. The proposed TIOC describes the control process as a bounded constraint optimization problem, in which an optimal semi- active control force vector is solved by the trust-region method in every control step to minimize the structural responses. A numerical example of a railway station roof structure installed with MRF-04K dampers is presented. First, a modified Bouc- Wen model is utilized to describe the behavior of the selected MRF-04K damper. Then, two semi-active control systems, including the well-known clipped-optimal controller and the proposed TIOC controller, are considered. Based on the characteristics of the long-span spatially extended structure, the performance of the control system is evaluated under uniform earthquake excitation and travelling-wave excitation with different apparent velocities. The simulation results indicate that the MR fluid damper-based semi-active control systems have the potential to mitigate the responses of full-scale long-span spatially extended structures under earthquake hazards. The superiority of the proposed TIOC controller is demonstrated by comparing its control effectiveness with the clipped-optimal controller for several different cases.

Best Tracking Performance under Plant Uncertainty and Control Energy Constraint

This paper has investigated best tracking performance for linear feedback control systems in the case that plant uncertainty and control effort need to be considered simultaneously. Firstly, an average integral square criterion of the tracking error and the plant input energy over a class of additive model errors is defined. Then, utilizing spectral factorization to minimize the performance index, we obtain an optimal controller design method, and furthermore study optimal tracking performance under plant uncertainty and control energy constraint. The results can be used to evaluate optimal average tracking performance and control energy in designing practical control systems.

Constrained predictive control of nonlinear stochastic systems

The receding horizon control（RHC） problem is considered for nonlinear Markov jump systems which can be represented by Takagi-Sugeno fuzzy models subject to constraints both on control inputs and on observe outputs.In the given receding horizon,for each mode sequence of the T-S modeled nonlinear system with Markov jump parameter,the cost function is optimized by constraints on state trajectories,so that the optimization control input sequences are obtained in order to make the state into a terminal invariant set.Out of the receding horizon,the stability is guaranteed by searching a state feedback control law.Based on such stability analysis,a linear matrix inequality approach for designing receding horizon predictive controller for nonlinear systems subject to constraints both on the inputs and on the outputs is developed.The simulation shows the validity of this method.

The Research of Role Tree-Based Access Control Model

Towards the crossing and coupling permissions in tasks existed widely in many fields and considering the design of role view must rely on the activities of the tasks process,based on Role Based Accessing Control (RBAC) model,this paper put forward a Role Tree-Based Access Control (RTBAC) model. In addition,the model definition and its constraint formal description is also discussed in this paper. RTBAC model is able to realize the dynamic organizing,self-determination and convenience of the design of role view,and guarantee the least role permission when task separating in the mean time.

Solution of Chemical Dynamic Optimization Using the Simultaneous Strategies

An approach of simultaneous strategies with two novel techniques is proposed to improve the solution accuracy of chemical dynamic optimization problems. The first technique is to handle constraints on control vari- ables based on the finite-element collocation so as to control the approximation error for discrete optimal problems, where a set of control constraints at dement knots are integrated with the procedure for optimization leading to a significant gain in the accuracy of the simultaneous strategies. The second technique is to make the mesh refine- ment more feasible and reliable by introducing length constraints and guideline in designing appropriate element length boundaries, so that the proposed approach becomes more efficient in adjusting dements to track optimal control profile breakpoints and ensure accurate state and centrol profiles. Four classic benchmarks of dynamic op- timization problems are used as illustrations, and the proposed approach is compared with literature reports. The research results reveal that the proposed approach is preferz,ble in improving the solution accuracy of chemical dy- namic optimization problem.

Stability case study of the ACROBOTER underactuated service robot

The dynamics of classical robotic systems are usually described by ordinary differential equations via selecting a minimum set of independent generalized coordinates. However, different parameterizations and the use of a nonminimum set of （dependent） generalized coordinates can be advantageous in such cases when the modeled device contains closed kinematic loops and/or it has a complex structure. On one hand, the use of dependent coordinates, like natural coordinates, leads to a different mathematical representation where the equations of motion are given in the form of differential algebraic equations. On the other hand, the control design of underactuated robots usually relies on partial feedback linearization based techniques which are exclusively developed for systems modeled by independent coordinates. In this paper we propose a different control algorithm formulated by using dependent coordinates. The applied computed torque controller is realized via introducing actuator constraints that complement the kinematic constraints which are used to describe the dynamics of the investigated service robotic system in relatively simple and compact form. The proposed controller is applied to the computed torque control of the planar model of the ACROBOTER service robot. The stability analysis of the digitally controlled underactuated service robot is provided as a real parameter case study for selecting the optimal control gains.

Best tracking performance for integrator and dead time plant

The optimal tracking performance for integrator and dead time plant in the case where plant uncertainty and control energy constraints are to be considered jointly is inrestigated. Firstly, an average cost function of the tracking error and the plant input energy over a class of stochastic model errors are defined. Then, we obtain an internal model controller design method that minimizes the average performance and further studies optimal tracking performance for integrator and dead time plant in the simultaneous presence of plant uncertainty and control energy constraint. The results can be used to evaluate optimal tracking performance and control energy in practical designs.

VARIATIONAL DISCRETIZATION OF A CONTROL-CONSTRAINED PARABOLIC BANG-BANG OPTIMAL CONTROL PROBLEM

We consider a control-constrained parabolic optimal control problem without Tikhonov term in the tracking functional.For the numerical treatment,we use variational discretization of its Tikhonov regularization:For the state and the adjoint equation,we apply Petrov-Galerkin schemes in time and usual conforming finite elements in space.We prove a-priori estimates for the error between the discretized regularized problem and the limit problem.Since these estimates are not robust if the regularization parameter tends to zero,we establish robust estimates,which--depending on the problem's regularity——enhance the previous ones.In the special case of bang-bang solutions,these estimates are further improved.A numerical example confirms our analytical findings.

L∞-ESTIMATES OF MIXED FINITE ELEMENT METHODS FOR GENERAL NONLINEAR OPTIMAL CONTROL PROBLEMS

This paper investigates L∞--estimates for the general optimal control problems governed by two-dimensional nonlinear elliptic equations with pointwise control constraints using mixed finite element methods. The state and the co-state are approximated by the lowest order Raviart-Thomas mixed finite element spaces and the control is approximated by piecewise constant functions. The authors derive L∞--estimates for the mixed finite element approximation of nonlinear optimal control problems. Finally, the numerical examples are given.

Robust control for an unmanned helicopter with constrained flapping dynamics

In this paper, a neural network based adaptive prescribed performance control scheme is proposed for the altitude and attitude tracking system of the unmanned helicopter in the presence of state and output constraints. For handling the state constraints, the barrier Lyapunov function and the saturation function are employed. And, the prescribed performance method is used to deal with the flapping angle constraints for the unmanned helicopter. It is proved that the proposed control approach can ensure that all the signals of the resulting closed-loop system are bounded, and the tracking errors are within the prescribed performance bounds for all time. The numerical simulation is given to illustrate the performance of the proposed scheme.

Model-based nonlinear control of hydraulic servo systems： Challenges, developments and perspectives

Hydraulic servo system plays a significant role in industries, and usually acts as a core point in control and power transmission. Although linear theory-based control methods have been well established, advanced controller design methods for hydraulic servo system to achieve high performance is still an unending pursuit along with the development of modem industry. Essential nonlinearity is a unique feature and makes model-based nonlinear control more attractive, due to benefit from prior knowledge of the servo valve controlled hydraulic system. In this paper, a discussion for challenges in model-based nonlinear con- trol, latest developments hydraulic servo systems are and brief perspectives of presented： Modelling uncer- tainty in hydraulic system is a major challenge, which includes parametric uncertainty and time-varying distur- bance; some specific requirements also arise ad hoc difficulties such as nonlinear friction during low velocity tracking, severe disturbance, periodic disturbance, etc.; to handle various challenges, nonlinear solutions including parameter adaptation, nonlinear robust control, state and disturbance observation, backstepping design and so on, are proposed and integrated, theoretical analysis and lots of applications reveal their powerful capability to solve pertinent problems; and at the end, some perspectives and associated research topics （measurement noise, constraints, inner valve dynamics, input nonlinearity, etc.） in nonlinear hydraulic servo control are briefly explored and discussed.

The Interaction between Control and Computing Theories:New Approaches

Day by day, networked control system（NCS） methods have been promoted for distributed closed-loop control systems.Interestingly, the integration of control and computing theories enhanced the development of networked control systems through remote control for wide applications employing the internet. Two further directions to networked control technology are LeaderFollower systems and model predictive control systems. Cloud control system is looked at an extension of networked control systems（NCS） using internet of things（IOT） methodologies. In this paper, a comprehensive literature survey of the new technology of control systems application performed on cloud computing is presented.