A matrix metalloproteinase-responsive hydrogel system controls angiogenic peptide release for repair of cerebral ischemia/reperfusion injury

Vascular endothelial growth factor and its mimic peptide KLTWQELYQLKYKGI(QK)are widely used as the most potent angiogenic factors for the treatment of multiple ischemic diseases.However,conventional topical drug delivery often results in a burst release of the drug,leading to transient retention(inefficacy)and undesirable diffusion(toxicity)in vivo.Therefore,a drug delivery system that responds to changes in the microenvironment of tissue regeneration and controls vascular endothelial growth factor release is crucial to improve the treatment of ischemic stroke.Matrix metalloproteinase-2(MMP-2)is gradually upregulated after cerebral ischemia.Herein,vascular endothelial growth factor mimic peptide QK was self-assembled with MMP-2-cleaved peptide PLGLAG(TIMP)and customizable peptide amphiphilic(PA)molecules to construct nanofiber hydrogel PA-TIMP-QK.PA-TIMP-QK was found to control the delivery of QK by MMP-2 upregulation after cerebral ischemia/reperfusion and had a similar biological activity with vascular endothelial growth factor in vitro.The results indicated that PA-TIMP-QK promoted neuronal survival,restored local blood circulation,reduced blood-brain barrier permeability,and restored motor function.These findings suggest that the self-assembling nanofiber hydrogel PA-TIMP-QK may provide an intelligent drug delivery system that responds to the microenvironment and promotes regeneration and repair after cerebral ischemia/reperfusion injury.

Controlled release of dexamethasone from fibrin sealant for intratympanic administration in inner ear therapy

The aim of the present work was to show the sustainability of fibrin sealant in releasing dexamethasone and adjust the protocol for clinical application of the novel method in the treatment of Meniere’s disease (MD) and sudden sensorineural hearing loss (SSHL).Gelation occurred shortly after mixing dexamethasone-containing fibrinogen with thrombin.Dexamethasone was constantly released for at least 16 d at a stable level after 7d in protocol 1 (low-dose),while it was robustly released within 4 d and slowed afterward until 10 d in protocol 2(high-dose).There were significant differences among the time points in Protocol 2 (p<0.01,ANOVA),and the exponential model with the formula y=15.299*e~(-0.483*t) fits the association.The estimated concentration of dexamethasone released on 7 d in protocol 2 was slightly lower than that observed in protocol 1.The fibrin sealant is capable of constantly releasing dexamethasone with adjustable dynamics.Targeted and minimally invasive administration of the material can be achieved in the clinic by sequential injections of the fluids using a soft-tipped catheter.

Controlled-Release of Plant Volatiles:New Composite Materials of Porous Carbon-Citral and Their Fungicidal Activity against Exobasidium vexans

Citral(Eo)exhibits excellent fungicidal activities.However,it is difficult to maintain long-term fungicidal activity due to its strong volatility.Herein,a controlled-release strategy by using biomass-derived porous carbon(BC)was developed to overcome the drawback of Eo.New composite materials were prepared by loading Eo on tea stem porous carbon(BC@Eo),and their controlled-release fungicidal activity against Exobasidium vexans was assessed.BC with a large specific surface area of 1001.6 m2/g and mesoporous structure was fabricated through carbonization tempera-ture of 700℃.The BC@Eo materials were characterized using Fourier-transform infrared spectroscopy and X-ray powder diffraction.The results suggested that chemical and physical interactions occurred in BC@Eo.The Eo release profile suggested a biphasic pattern with an initial fast release on days 1–14 and a subsequent controlled phase on days 14–30.The in vitro cumulative release percentage of Eo from BC@Eo was 51%during one month,and this result was significantly lower than that from free Eo(cumulative release percentage of Eo of 82%in one week).The anti-fungal activities of Eo and BC@Eo against E.vexans were determined using the inhibition zone method.The results indicated that Eo and BC@Eo formed large inhibition zones of 19.66±0.79 and 21.92±0.77 mm,respectively.The influence on the hyphal structure of E.vexans was observed by scanning electron microscopy on day 30.The hyphal structure of E.vexans treated with BC@Eo was more shrunken than that treated with Eo at 30 days,suggesting that BC@Eo prolongs the fungicidal activity against E.vexans.This study demonstrated that the encapsulation of Eo in BC for developing the BC@Eo materials could be a promising strategy to inhibit volatility and maintain the fungicidal activity of Eo and provide a potential alternative for the reuse of abundant tea biomass waste resources.

Assessment of the crucial factors influencing the responses of ammonia and nitrous oxide emissions to controlled release nitrogen fertilizer: A meta-analysis

Reducing ammonia(NH3) and nitrous oxide(N2O) emissions have great effects on mitigating nitrogen(N) nutrient loss and greenhouse gas emissions. Controlled release urea(CRU) can control the N release rate, which reduces reactive N loss and increases nitrogen use efficiency relative to conventional urea(CU). However, the crucial factors influencing the responses of NH3and N2O emissions to CRU relative to CU are still unclear. In this study, we evaluated the responses of NH3and N2O emissions to CRU based on collected field data with a meta-analysis. CRU reduced the NH3and N2O emissions by 32.7 and 25.0% compared with CU, respectively. According to subgroup analysis, CRU presented better mitigation of NH3and N2O emissions in soils with pH 6.5–7.5(–47.9 and –23.7%) relative to either pH<6.5(–28.5and –21.4%) or pH>7.5(–29.3 and –17.3%), and in the rice season(–34.8 and –29.1%) relative to the wheat season(–19.8 and –22.8%). The responses of NH3and N2O emissions to CRU increased from rainfed(–30.5 and –17.0%) to irrigated(–32.5 and –22.9%), and then to paddy(–34.8 and –29.1%) systems. In addition, the response of N2O emission mitigation increased with increases in soil total nitrogen(TN);however, soil TN did not significantly affect the response of NH3volatilization. The reduction in NH3emission was greater in sandy-textured soil(–57.7%) relative to loam-textured(–32.9%) and clay-textured(–32.3%) soils, whereas soil texture did not affect N2O emission. Overall, CRU was a good option for reducing the NH3and N2O emissions relative to CU in agricultural production. This analysis improves our understanding of the crucial environmental and management factors influencing the mitigation of NH3and N2O emissions under CRU application, and these site-specific factors should be considered when applying CRU to reduce reactive N loss and increase NUE.

Growth of tandem long-mat rice seedlings using controlled release fertilizers:Mechanical transplantation can be more economical and high yielding

The traditional soil-based rice seedling production methods for mechanical transplanting are resource-intensive,time consuming and laborious.The improvement and optimization of nutrient management in soil-less nursery raising methods like tandem long-mat seedlings(TLMS)are necessary for the resource-efficient cultivation of rice.In the present study,a controlled-release fertilizer(CRF)-polymer-coated compound fertilizer with 3 months release period(PCCF-3M)was applied as seedling fertilizer(SF),and five different dosages of SF(SF-0,SF-10,SF-20,SF-30,and SF-40)were compared with an organic substrate as the control(CK).Among all SF treatments,the best results were obtained with the application of 20 g/tray of SF(SF-20),as the seedling quality and machine transplanting quality were comparable to those of CK.In contrast,the lower dosages(SF-0 and SF-10)resulted in low nitrogen content and reduced shoot growth,while the higher dosages(SF-30 and SF-40)resulted in toxicity(increased malondialdehyde accumulation)and inhibited the root growth.Similarly,SF-20 increased panicle number(5.6-7.0%)and yield(4.3-5.3%)compared with CK,which might be related to the remaining SF entangled in the roots supporting the tiller growth of rice seedlings in the field.Moreover,SF-20 reduced the seedling block weight(53.1%)and cost of seedling production(23.5%)but increased the gross margin,indicating that it was easy to handle and economical.Taken together,our results indicate that SF-20 is a cost-effective way to promote the growth and transplanting efficiency of rice seedlings.To our knowledge,this study is the first to determine the optimum dosage of CRF for the soil-less production of rice seedlings.

Spatiotemporal phase change materials for thermal energy long-term storage and controllable release

Phase change materials(PCMs)have attracted much attention in the field of solar thermal utilization recently,due to their outstanding thermal energy storage performance.However,PCMs usually release their stored latent heat spontaneously as the temperature below the phase transition temperature,rendering thermal energy storage and release uncontrollable,thus hindering their practical application in time and space.Herein,we developed erythritol/sodium carboxymethylcellulose/tetrasodium ethylenediaminetetraacetate(ERY/CMC/EDTA-4Na)composite PCMs with novel spatiotemporal thermal energy storage properties,defined as spatiotemporal PCMs(STPCMs),which exhibit the capacity of thermal energy long-term storage and controllable release.Our results show that the composite PCMs are unable to lose latent heat due to spontaneous crystallization during cooling,but can controllably release thermal energy through cold crystallization during reheating.The cold-crystallization temperature and enthalpy of composite PCMs can be adjusted by proportional addition of EDTA-4Na to the composite.When the mass fractions of CMC and EDTA-4Na are both 10%,the composite PCMs can exhibit the optical coldcrystallization temperature of 51.7℃ and enthalpy of 178.1 J/g.The supercooled composite PCMs without latent heat release can be maintained at room temperature(10-25℃)for up to more than two months,and subsequently the stored latent heat can be controllably released by means of thermal triggering or heterogeneous nucleation.Our findings provide novel insights into the design and construction of new PCMs with spatiotemporal performance of thermal energy long-term storage and controllable release,and consequently open a new door for the development of advanced solar thermal utilization techniques on the basis of STPCMs.

Effects of Different Proportions of Controlled Release Urea and Ordinary Urea on Peanut Yield

[Objectives]To study the effects of different proportions of controlled release urea and ordinary urea on peanut yield.[Methods]A total of 5 treatments were set up according to different proportions of controlled release urea and ordinary urea,randomly arranged in blocks and repeated 3 times.[Results]The test results of field districts showed that different proportions of controlled release urea and conventional urea had different effects on peanut yield.On the basis of applying 50 kg/666.7 m^(2)of calcium superphosphate and 17 kg/666.7 m^(2)of potassium sulfate,13.34 kg/666.7 m^(2)of pure nitrogen was applied.The optimal ratio of controlled release urea to ordinary urea was 75:25,followed by 50:50.The output was 379.83 and 371.83 kg/666.7 m^(2),separately increased by 6.74%and 4.50%compared to the application of ordinary urea.[Conclusions]The combined application of controlled release urea and ordinary urea in peanuts can significantly increase peanut yield compared to just applying ordinary urea.

Effects of slow or controlled release fertilizer types and fertilization modes on yield and quality of rice

There is limited information about the influence of slow or controlled release fertilizer（S/CRF） on rice yield and quality. In this study, japonica rice cultivar Nanjing 9108 was used to study the effects of three different S/CRFs（polymer-coated urea（PCU）, sulfur-coated urea（SCU）, and urea formaldehyde（UF）） and two fertilization modes（both S/CRF and common urea（CU） as basal fertilizer, S/CRF as basal and CU as tillering fertilizer） on rice yield and quality. CU only was applied separately as control（CK）. Results showed that, rice grain yield, chalky kernel rate, chalky area, overall chalkiness, and the content of gliadin, glutenin, and protein, all showed the trends of UF〉PCU〉SCU within the same fertilization mode, and showed the trends of S/CRF as basal and CU as tillering fertilizer〉both S/CRF and CU as basal fertilizer within the same type of S/CRF. In contrast, the contents of amylose, amylopectin, and starch, as well as taste value, and peak and hot viscosity showed trends of SCU〉PCU〉UF, and the trends of both S/CRF and CU as basal fertilizer〉S/CRF as basal and CU as tillering fertilizer. Among S/CRF treatments and fertilization modes, taste values of cooked rice were positively correlated with amylose, amylopectin, and starch contents, as well as gel consistency, peak viscosity, hot viscosity, and cool viscosity, while negatively correlated with globulin, gliadin, glutenin, and protein contents. The types of S/CRF and fertilization modes are important for improving rice yield and quality. Compared to CK, higher yield and similar quality of rice was achieved with UF as basal and CU as tillering fertilizer, and similar yield with improved appearance and eating and cooking quality of rice was achieved with either both UF and CU as basal fertilizer, or PCU as basal and CU as tillering fertilizer.

Study of Dynamics of Floodwater Nitrogen and Regulation of Its Runoff Loss in Paddy Field-Based Two-Cropping Rice with Urea and Controlled Release Nitrogen Fertilizer Application

The article deals with the effects of urea and controlled release nitrogen fertilizer （CRNF） on dynamics of pH, electronic conductivity （EC）, total nitrogen （TN）, NH4^＋-N and NO3 -N in floodwater, and the regulation of runoff TN loss from paddy field-based two-cropping rice in Dongting Lake, China, and probes the best fertilization management for controlling N loss. Studies were conducted through modeling alluvial sandy loamy paddy soil （ASP） and purple calcareous clayey paddy soil （PCP） using lysimeter, following the sequence of the soil profiles identified by investigating soil profile. After application of urea in paddy field-based two-cropping rice, TN and NHa＋-N concentrations in floodwater reached peak on the 1st and the 3rd day, respectively, and then decreased rapidly over time; all the floodwater NO3--N concentrations were very low; the pH of floodwater gradually rose in case of early rice within 15 d （late rice within 3 d） after application of urea, and EC remained consistent with the dynamics of NH4^＋-N. The applied CRNF, especially 70% CRNF, led to significantly lower floodwater TN and NH4^＋ concentrations, pH, and EC values compared with urea within 15 d after application. The monitoring result for N loss due to natural rainfall runoff indicated that the amount of TN lost in runoff from paddy field- based two-cropping rice with urea application in Dongting Lake area was 7.47 kg ha^-1, which accounted for 2.49% of urea- N applied, and that with CRNF and 70% CRNF application decreased 24.5 and 27.2% compared with urea application, respectively. The two runoff events, which occurred within 20 d after application, contributed significantly to TN loss from paddy field. TN loss due to the two runoffs in urea, CRNF, and 70% CRNF treatments accounted for 72, 70, and 58% of the total TN loss due to runoff over the whole rice growth season, respectively. And the TN loss in these two CRNF treatments due to the first run-off event at the 10th day after application to early rice decreased 44.9 and 44.2% compared with urea, respectively. In conclusion, the 15-d period after application of urea was the critical time during which N loss occurred due to high floodwater N concentrations. But CRNF decreased N concentrations greatly in floodwater and runoff water during this period. As a result, it obviously reduced TN loss in runoff over the whole rice growth season.

Release Characteristics of Different N Forms in an Uncoated Slow/Controlled Release Compound Fertilizer

This study examined the release characteristics of different N forms in an uncoated slow/controlled-release compound fertilizer （UCRF） and the N uptake and N-use efficiency by rice plants. Water dissolution, soil leaching, and pot experiments were employed. The dynamics of N release from the UCRF could be quantitatively described by three equations： the first-order kinetics equation [N1=N0 （1-e^-kt）], Elovich equation （N1=a ＋ blnt）, and parabola equation （N1=a ＋ bt^0.5）, with the best fitting by the first-order kinetics equation for different N （r= 0.9569^＊＊-0.9999^＊＊）. The release potentials （No values estimated by the first-order kinetics equation） of different N in the UCRF decreased in the order of total N 〉 DON 〉 urea-N 〉 NH4^＋-N 〉 NO3^-N in water, and total N 〉 NH4^＋-N 〉 DON 〉 urea-N 〉 NO3^--N in soil, respectively, being in accordance with cumulative amounts of N release. The constants of N release rate （k values and b values） for different N forms were in decreasing order of total N 〉 DON 〉 NH4^＋-N 〉 NO3^--N in water, whereas the k values were urea- N 〉DON 〉 NH4^＋-N 〉 total N 〉 NO3^--N, and the b values were total N 〉 NH4^＋-N 〉 DON 〉 NO3^--N 〉 urea-N in soil. Compared with a common compound fertilizer, the N-use efficiency, N-agronomy efficiency, and N-physiological efficiency of the UCRF were increased by 11.4%, 8.32 kg kg^-1, and 5.17 kg kg^-1, respectively. The ratios of different N to total N in the UCRF showed significant correlation with N uptake by rice plants. The findings showed that the first-order kinetics equation [Nt=N0 （l-e^kt）] could be used to describe the release characteristics of different N forms in the fertilizer. The UCRF containing different N forms was more effective in facilitating N uptake by rice compared with the common compound fertilizer containing single urea-N form.

Synthesis and Performance of Polyurethane Coated Urea as Slow/controlled Release Fertilizer

Polyurethane coated urea slow/controlled release fertilizer was prepared based on urea granules, isocyanate, polyols and paraffin. Isocyanate reacted with polyols to synthesize the polyurethane skin layer on urea granules surface. Paraffin serves as a lubricant during syntheses of polyurethane skin layers. The structure and nutrient release characteristics of the polyurethane skin layers were investigated by FTIR, SEM and TG. Urea nitrogen slow-release behavior of the polyurethane coated urea was tested. The experimental results indicated that compact and dense polyurethane skin layers with a thickness of 10-15 lam were formed on urea surface, the urea nitrogen slow-release time can reach 40-50 days. Paraffin proves to play a key role in inhibiting water to penetrate into urea, but excessive addition would decrease the polyurethane crosslinking density.

Study on the Rapid Method to Predict Longevity of Controlled Release Fertilizer Coated by Water Soluble Resin

The study discussed the rapid method to test and predict the longevity of controlled release fertilizers （CRFs） coated by water soluble resin by using the short-term leaching under higher temperature. Pure water dissolving incubation and higher temperature leaching were used to study the patterns of the nutrient release of the CRFs. The correlation analysis between the days at 25℃ and the hours at 80℃ of Trincote 1 and Trincote 2 for the same cumulative release rates were conducted. Patterns of cumulative nutrient release curve followed one factor quadratic regression equation at each given temperatures, and each of relative coefficient was bigger than 0.995. As the temperature increased, nutrients release of the CRFs increased. The longevity of resin coated CRFs were predicted by use of both the cumulative nutrients release equation at 80℃ and the regression equation of release time needed for the same cumulative release rates between 25 and 80℃. There were only 0.3-6.9% relative errors between the tested longevity and predicted one. In conclusion, the longevity of resin coated CRFs could be predicted more quickly and precisely by use of the higher temperature short-term leaching method than that of the traditional differential release rate. The longevity of resin coated CRF could be rapidly and precisely predicted in a few hours by application of the higher temperature shortterm leaching method.

Protein Adsorption onto Nanosized Hydroxyapatite Particles for Controlled Drug Release

Nanosized hydroxyapatite（nsHAp） was synthesized to examine its possibility as a controlled release cartier of protein. To achieve effective protein release from nanosized hydroxyapatite, the study of the adsorptive properties of protein on nsHAp and different influence parameters such as pH, calcium, and phosphate concentrations during the adsorption process is necessary. Ovalbumin（OVA） was selected as the model of growth factors. The results show that the amount of OVA adsorbed onto nsHAp in acetic buffer（pH = 3.6） is more than that in acetic buffer（pH =5.6） because of the electric interaction. The amount of OVA adsorption in phosphate buffer solution（PBS） is smaller than that in acetic buffer because of surface complexation and surface hydroxylation. The presence of Ca^2＋ dramatically increases the adsorbed amount of OVA in acetic buffer on maintaining the same pH. Meanwhile, the release kinetics of OVA adsorbed onto nsHAp（nsHAp-OVA） was also examined. The amount of released OVA in PBS（pH = 5.6） was significantly smaller than that released in solution of pH = 7.0. All the results suggest that nanosized hydroxyapatite particles could be successfully used as controlled released carrier of protein.

Alginate-based complex fibers with the Janus morphology for controlled release of co-delivered drugs

Hydrogels are soft materials consisting of a three-dimensional network of polymer chains.Over the years,hydrogels with different compositions have been developed as drug carriers for diverse biomedical applications,ranging from cancer therapy and wound care to the treatment of neurodegenerative and inflammatory diseases.Most of these carriers,however,are designed only to deliver single agents.Carriers based on hydrogels for co-delivery of multiple agents,with the release rate of each of the co-delivered agents tunable,are lacking.This study reports a one-pot method of fabricating alginate-based complex fibers with the Janus morphology,with carboxymethyl cellulose sodium functioning as a polymeric modifier of the properties of each of the fiber compartments.By using malachite green and minocycline hydrochloride as model drugs,the generated fibers demonstrate the capacity of enabling the release profile of each of the co-delivered drugs to be precisely controlled.Along with their negligible toxicity and the retention of the activity of the loaded drugs,the complex fibers reported in this study warrant further development and optimization for applications that involve co-delivery of multiple agents.

4D printing of core-shell hydrogel capsules for smart controlled drug release

Personalized drugs,as well as disease-specific and condition-dependent drug release,have been highly desired in drug delivery systems for effective and safe therapies.Four-dimensional(4 D)printing,as a newly emerging technique to develop drug capsules,displays unique advantages that can autonomously control drug release according to the actual physiological circumstances.Herein,core-shell structured hydrogel capsules were developed using a multimaterial extrusion-based 4 D printing method,which consists of a model drug as the core and UV cross-linked poly(N-isopropylacrylamide)(PNIPAM)hydrogel as the shell.Owing to the lower critical solution temperature(LCST)-induced shrinking/swelling properties,the prepared PNIPAM hydrogel capsules showed temperature-responsive drug release along with the topography changes in the cross-linked PNIPAM network.The in vitro drug release test confirmed that the PNIPAM hydrogel capsules can autonomously control their drug release behaviors according to changes in ambient temperature.Moreover,the increased shell thickness of these capsules causes an obvious reduction in drug release rate,distinctly indicating that the drug release behavior can be well adjusted by setting the shell thickness of the capsules.The proposed 4 D printing strategy pioneers the paradigm of smart drug release by showing great potential in the smart controlled release of drugs and macromolecular active agents.

CONTROLLED RELEASE FROM PDMAEMA GELS PREPARED BY GAMMA RADIATION

Poly(N,N-dimethylaminoethyl methacrylate) (polyDMAEMA) hydrogels prepared by gamma-irradiation showed obvious temperature-sensitivity in a temperature range of 38-40degreesC and pH-sensitivity at pH=2.5. They also showed electric response behavior although it was not typical. The hydrogels were used in controlled release at different pH, temperature, and electric voltage. The release rates of methylene blue (MB) from the gels at 52degreesC and pH=1.24 were faster than those at 20degreesC and pH=10.56, respectively. In addition, the release rate at a field voltage of 5.0 was also faster than that without electric field.

Synthesis of the Core-Shell Structure Materials as the Controlled-Release Drug Carrier

We have developed a controlled-release drug carrier. Smartly controlled-release polymer nanoparticles were firstly synthesized through RAFT polymerization as the controlled-release core. The structural and particle properties of polymer nanoparticles were characterized by nuclear magnetic resonance spectroscopy (1H-NMR), scanning electron microscope (SEM) and X-ray spectroscopy (EDX). Mesoporous materials were selected as the shell materials to encapsulate the smart core as the stable shell. The mesoporous shell was characterized by transmission electron microscopy (TEM) and scanning electron microscope (SEM). All the results showed that a well-defined core-shell structure with mesoporous structure was obtained, and this controllable delivery system will have the great potential in nanomedicine.

Quantitative Evaluation on the Comprehensive Benefit of Controlled-Release Fertilizer in Typically Middle-Low Yield Rice Field

Quantitative evaluation and analysis was made to the soil nutrients,rice yield,rice and fertilizer utilization rate,and economic and ecological benefits of the slow controlled release fertilizer in typical rice fields with middle-low yield by comparing the one-time application and split applications of slow-or controlledrelease fertilizer（ CRF） with farmers fertilizer practice as the control,with the aim to explore the effect of CRF. Results showed that compared with the control,the application of CRF could meet balance nutrients required for rice growth,and the effective panicles and seed-setting rate were higher in the treatment groups of FVOL,SVOL,LADVOLwhich applied CRF. As for soil nutrients,soil pH maintained balance in FVOL,FCAI,SVOL,LADVOL. In addition,differences in soil nutrient reduction amount reached the extremely significant level between FVOLand SXNK.SVOLwhich applied CRF provided reasonable regulation of N,P and K release rate,which showed advantages over blending fertilization and farmers fertilizer practice. Comprehensive analysis found that the application of CRF could make rice tillering growth and decline leveled off,which effectively improved the quality of rice population,and it also had higher input-output ratio than that of the control and good economic benefits. In general,CRF suits to be used widely on rice crop in the regions with medium-low yield.

Nitrogen Release Characteristics of a Bag Controlled Release Fertilizer

Slow release fertilizers are designed to enhance crop yield and minimizing the loss of nitrogen(N)to environment.However,N release in leaching and loss in ammonia emission from bag controlled release fertilizers have not been previously evaluated under the standardized conditions in soil.Accordingly,a laboratory study was conducted to evaluate the characteristics of N release from a bag controlled fertilizer with 1,3,5 and 7 rows of hole(B-1,B-3,B-5,B-7)and a kraft bag without hole(B-W).The results showed that the amount of N leaching of B-1,B-3,B-5,B-7 and B-W were significantly lower than urea fertilizer without bag(U).The maximum N release from the fertilizers followed the order:U(83.16%)>B-7(54.61%)>B-5(54.02%)>B-W(51.51%)>B-3(48.87%)>B-1(38.60%)during the experimentation.Compared with U treatment,ammonia volatilization losses were significantly decreased by B-1,B-3,B-5,B-7 and B-W treatments.Based on N release and loss,a suitable bag with holes should be considered in practice when using the bag controlled fertilizer to meet an environment good objective.The evaluation method merits further study combined with field experiment.

Comparison of Release Efficiencies for the Controlled-Release of Potassium Permanganate in Polycaprolactone

The application of controlled release materials in tandem with chemical oxidants has become an emerging topic within the field of environmental treatment. The controlled release kinetic and mechanistic relationship between these components is important to understand a controlled release system. Potassium permanganate (KMnO4) was used as the encapsulated material integrated into polycaprolactone (PCL) producing controlled release biodegradable polymer (CRBP) pellets. In this study, batch experiments were used to examine the release kinetics from the discharge of the pelletized encapsulated oxidant into aqueous systems at various KMnO4:PCL ratios of 1:5, 2:5, and 3:5 by mass. Experimental results indicated as the amount of KMnO4 in the PCL polymer pellets increased, a greater fraction of the oxidant was released as a function of time. The resultant data best fit a linearized diffusion model equation. Additionally, a comparison-controlled release study was conducted that contained the same oxidant at similar mass ratios. Release kinetics determined from this study could lead to effective implementation of CRBP systems and could suggest that CRBP encapsulated with KMnO4 could serve as a promising controlled release technology in a long-term and controlled manner.