A design for precise scanning magnetic field control for the beam delivery system of the Shanghai Advanced Proton Therapy Facility(APTRON) is presented in this paper. With a novel feedforward algorithm to compensate f...A design for precise scanning magnetic field control for the beam delivery system of the Shanghai Advanced Proton Therapy Facility(APTRON) is presented in this paper. With a novel feedforward algorithm to compensate for magnet hysteresis, the scanning magnetic field can be controlled to within a precision of ± 2.5 G.The main advantage of the proposed feedforward algorithm is that the average settling time is shorter compared with that of a conventional feedback algorithm with acceptable tolerance.展开更多
In order to use electron beam as a movable welding heat source and whose energy distribution along its moving trace can be controlled, a method of electron beam scanning track and scanning mode control was put forward...In order to use electron beam as a movable welding heat source and whose energy distribution along its moving trace can be controlled, a method of electron beam scanning track and scanning mode control was put forward. Based on it, the electron beam scanning track and scanning mode can be edited at will according to actual requirements, and the energy input of each point of the scanning track can be controlled. In addition, the scanning frequency and points control, real time adjusting of the scanning track etc. were explained. This method can be used in electron beam brazing, surface modification, surface heat treatment etc.展开更多
Steel matrix composites(SMCs)reinforced with WC particles were fabricated via selective laser melting(SLM)by employing various laser scan strategies.A detailed relationship between the SLM strategies,defect formation,...Steel matrix composites(SMCs)reinforced with WC particles were fabricated via selective laser melting(SLM)by employing various laser scan strategies.A detailed relationship between the SLM strategies,defect formation,microstructural evolution,and mechanical properties of SMCs was established.The laser scan strategies can be manipulated to deliberately alter the thermal history of SMC during SLM processing.Particularly,the involved thermal cycling,which encompassed multiple layers,strongly affected the processing quality of SMCs.Sshaped scan sequence combined with interlayer offset and orthogonal stagger mode can effectively eliminate the metallurgical defects and retained austenite within the produced SMCs.However,due to large thermal stress,microcracks that were perpendicular to the building direction formed within the SMCs.By employing the checkerboard filling(CBF)hatching mode,the thermal stress arising during SLM can be significantly reduced,thus preventing the evolution of interlayer microcracks.The compressive properties of fabricated SMCs can be tailored at a high compressive strength(~3031.5 MPa)and fracture strain(~24.8%)by adopting the CBF hatching mode combined with the optimized scan sequence and stagger mode.This study demonstrates great feasibility in tuning the mechanical properties of SLM-fabricated SMCs without varying the set energy input,e.g.,laser power and scanning speed.展开更多
This paper presents the principle and mathematic model for the 3D depth map method based on space encoding images performed by modulating scanning structuredlight according to time sequences,and the synchro control ...This paper presents the principle and mathematic model for the 3D depth map method based on space encoding images performed by modulating scanning structuredlight according to time sequences,and the synchro control among the camera,laser diode modulation and scanning polyhedron.展开更多
There should be high resolution demand that is better than 1000 DPI(dot per inch) for high precision image scanning system. This paper introduced the two-level computer controlled system that consisted of LS-3500 film...There should be high resolution demand that is better than 1000 DPI(dot per inch) for high precision image scanning system. This paper introduced the two-level computer controlled system that consisted of LS-3500 film scanner, AST386/33 monitoring control level and Intel 8031 single chip computer that is used as DDC level. The formula for scanning image data processing and methods of statistic parameters calculating are described.展开更多
A new electron beam control system was developed in a general vacuum electron beam machine by assembling with industrial control computer, programmable logic control （PLC）, deflection coil, data acquisition card, po...A new electron beam control system was developed in a general vacuum electron beam machine by assembling with industrial control computer, programmable logic control （PLC）, deflection coil, data acquisition card, power amplifier, etc. In this control system, scanning track and energy distribution of electron beam could be edited off-line, real-time adjusted and controlled on-line. Ti-Mo gradient material （GM） with high temperature resistant was fabricated using the technology of electron beam melting. The melting processes include three steps, such as preheating, melting, and homogenizing. The results show that the GM prepared by melting technology has fine appearance, and it has good integrated interface with the Ti alloy. Mo and Ti elements are gradually distributed in the inter.face of the gradient material. The microstructure close to the Ti alloy base metal is α ＋ β basket-waver grain, and the microstructure close to the GM is a single phase of β solid solution.展开更多
A composite target seeker gyro with dual spectral range infrared rays and millimeter waves, and the associated control methodology are developed. The static pressure air floated ball bearing is used to sustain the ou...A composite target seeker gyro with dual spectral range infrared rays and millimeter waves, and the associated control methodology are developed. The static pressure air floated ball bearing is used to sustain the outer frame, the optical fiber and wave guide are used to transmit these two kinds of signals to the rear part of the gyro, and the stator coils are used to get non contact angular measurement. Composite guiding, scanning, tracing and controlling can be achieved, the maximum tracing angular velocity can be as high as 16(°)/s.展开更多
给出一种CENTU MC S3000集散控制系统中分离信号软件模块的分程控制方案。提出利用该模块的信号分配功能，可以产生一种新型分程控制模式，即不必调整阀门定位器的机电机构就能使送到两个控制阀的输入信号范围均为0％-100％。通过应用...给出一种CENTU MC S3000集散控制系统中分离信号软件模块的分程控制方案。提出利用该模块的信号分配功能，可以产生一种新型分程控制模式，即不必调整阀门定位器的机电机构就能使送到两个控制阀的输入信号范围均为0％-100％。通过应用软件组态能够实现分程控制。这种方法具有工程实施省时省力、节省资金，控制效果更加准确可靠等优点，克服了传统分程控制参数调整不方便且稳定性较差等缺点。在石油化工企业的釜式间歇反应器温度分程控制和精馏塔塔压分程控制等系统中，有着广泛的应用前景。展开更多
基金supported by the Youth Innovation Promotion Association CAS(No.2016238)
文摘A design for precise scanning magnetic field control for the beam delivery system of the Shanghai Advanced Proton Therapy Facility(APTRON) is presented in this paper. With a novel feedforward algorithm to compensate for magnet hysteresis, the scanning magnetic field can be controlled to within a precision of ± 2.5 G.The main advantage of the proposed feedforward algorithm is that the average settling time is shorter compared with that of a conventional feedback algorithm with acceptable tolerance.
基金Commission of Science Technology and In-dustry for National Defense Project:Electron beam brazing tech-nology research ( 4 13 183 2 3 )
文摘In order to use electron beam as a movable welding heat source and whose energy distribution along its moving trace can be controlled, a method of electron beam scanning track and scanning mode control was put forward. Based on it, the electron beam scanning track and scanning mode can be edited at will according to actual requirements, and the energy input of each point of the scanning track can be controlled. In addition, the scanning frequency and points control, real time adjusting of the scanning track etc. were explained. This method can be used in electron beam brazing, surface modification, surface heat treatment etc.
基金the National Key Research and Development Program“Additive Manufacturing and Laser Manufacturing”(No.2016YFB1100101)the National Natural Science Foundation of China(No.51735005)+3 种基金the Basic Strengthening Program of Science and Technology(No.2019-JCJQ-JJ-331)the 5th Jiangsu Province 333 High Level Talents Training Project,China(No.BRA2019048)the 15th Batch of“Six Talents Peaks”Innovative Talents Team Program“Laser Precise Additive Manufacturing of Structure-Performance Integrated Lightweight Alloy Components”(No.TD-GDZB-001)and the 2017 Excellent Scientific and Technological Innovation Teams of Universities in Jiangsu“Laser Additive Manufacturing Technologies for Metallic Components”funded by Jiangsu Provincial Department of Education of China(No.51921003).Konrad Kosiba acknowledges the support from DFG under Grant No.KO 5771/1-1.
文摘Steel matrix composites(SMCs)reinforced with WC particles were fabricated via selective laser melting(SLM)by employing various laser scan strategies.A detailed relationship between the SLM strategies,defect formation,microstructural evolution,and mechanical properties of SMCs was established.The laser scan strategies can be manipulated to deliberately alter the thermal history of SMC during SLM processing.Particularly,the involved thermal cycling,which encompassed multiple layers,strongly affected the processing quality of SMCs.Sshaped scan sequence combined with interlayer offset and orthogonal stagger mode can effectively eliminate the metallurgical defects and retained austenite within the produced SMCs.However,due to large thermal stress,microcracks that were perpendicular to the building direction formed within the SMCs.By employing the checkerboard filling(CBF)hatching mode,the thermal stress arising during SLM can be significantly reduced,thus preventing the evolution of interlayer microcracks.The compressive properties of fabricated SMCs can be tailored at a high compressive strength(~3031.5 MPa)and fracture strain(~24.8%)by adopting the CBF hatching mode combined with the optimized scan sequence and stagger mode.This study demonstrates great feasibility in tuning the mechanical properties of SLM-fabricated SMCs without varying the set energy input,e.g.,laser power and scanning speed.
文摘This paper presents the principle and mathematic model for the 3D depth map method based on space encoding images performed by modulating scanning structuredlight according to time sequences,and the synchro control among the camera,laser diode modulation and scanning polyhedron.
文摘There should be high resolution demand that is better than 1000 DPI(dot per inch) for high precision image scanning system. This paper introduced the two-level computer controlled system that consisted of LS-3500 film scanner, AST386/33 monitoring control level and Intel 8031 single chip computer that is used as DDC level. The formula for scanning image data processing and methods of statistic parameters calculating are described.
文摘A new electron beam control system was developed in a general vacuum electron beam machine by assembling with industrial control computer, programmable logic control （PLC）, deflection coil, data acquisition card, power amplifier, etc. In this control system, scanning track and energy distribution of electron beam could be edited off-line, real-time adjusted and controlled on-line. Ti-Mo gradient material （GM） with high temperature resistant was fabricated using the technology of electron beam melting. The melting processes include three steps, such as preheating, melting, and homogenizing. The results show that the GM prepared by melting technology has fine appearance, and it has good integrated interface with the Ti alloy. Mo and Ti elements are gradually distributed in the inter.face of the gradient material. The microstructure close to the Ti alloy base metal is α ＋ β basket-waver grain, and the microstructure close to the GM is a single phase of β solid solution.
文摘A composite target seeker gyro with dual spectral range infrared rays and millimeter waves, and the associated control methodology are developed. The static pressure air floated ball bearing is used to sustain the outer frame, the optical fiber and wave guide are used to transmit these two kinds of signals to the rear part of the gyro, and the stator coils are used to get non contact angular measurement. Composite guiding, scanning, tracing and controlling can be achieved, the maximum tracing angular velocity can be as high as 16(°)/s.
文摘给出一种CENTU MC S3000集散控制系统中分离信号软件模块的分程控制方案。提出利用该模块的信号分配功能，可以产生一种新型分程控制模式，即不必调整阀门定位器的机电机构就能使送到两个控制阀的输入信号范围均为0％-100％。通过应用软件组态能够实现分程控制。这种方法具有工程实施省时省力、节省资金，控制效果更加准确可靠等优点，克服了传统分程控制参数调整不方便且稳定性较差等缺点。在石油化工企业的釜式间歇反应器温度分程控制和精馏塔塔压分程控制等系统中，有着广泛的应用前景。
