Research on Teaching Methods of Flight Control Principles

With the rapid development of China’s civil aviation industry,the teaching method of operating knowledge of flight principles has changed greatly,which creates a good implementation environment to improve the safety of civil aviation in our country.At present,the main training content of air route transport pilots in China is basic aviation theory,initial flight training,airline modification,etc.The principles of flight control are an important part of basic aviation theoretical knowledge training,which will involve a large number of flight technology training content,instructors will also be based on the pilot type.Teaching flight control theory and practical knowledge requires relatively high theoretical learning ability of students,and the learning effect of this part of theoretical knowledge will directly affect the quality of subsequent learning,but also directly affect the effectiveness of flight training.This paper focuses on the analysis of the basic concepts of flight control,studies the existing problems in the teaching of flight control principles,summarizes the teaching measures of flight control principles,aiming to provide a reference to teaching personnel.

The Application of Principle of Automatic Control in the site Management of Electric Power Construction Enterprise

It is need to establish site project department during the construction of electric power project.The head office should design and build the main structure,continually improve structure of project department,meantime,positively apply principle of automatic control to improve the site management of electric power construction.In this article,the application strategy of principle of automatic control is analyzed focusing on the site work of electric power construction.

Raw Gangue Filling Mining under Construction —A Case Study in China

In order to recover the strip pillar coal resources, reduce the amount of gangue mountain and realize remediation of the goaf environment in the old mining area, the raw gangue filling mining technology was proposed. According to the previous practical experience, the feasibility of the implementation of raw gangue filling mining technology in the coal-pressed area was analyzed. Through the filling gangue compaction test, the deformation under different loading stages was obtained. Further, a reasonable prediction of the deformation beyond the experimental limited loading load was made based on the experimental results. Through the deformation source analysis of the whole process of gangue filling, the key factors for controlling deformation before, during, and after filling were determined. Additionally, the proportion of deformation during different stages was quantified. Considering the protection of surface buildings, mining fullness of the working face and mining technology, the production parameters of 1209 and 1210 filling working faces were preliminarily determined. Through numerical simulation, the rationality of mining scheme was verified. Based on the practice of 1209 working face and the key factors to control the deformation of gangue filling, the mining system and process in 1210 working face were optimized. According to the measured surface rock movement, raw gangue filling mining technology can meet the requirements of surface building protection level. Especially, this paper provides a method to quantitatively calculate the equivalent mining height (EMH) of raw gangue filling and its mining deformation, which has reference significance for old mining areas.

Vertical migration through faults and hydrocarbon accumulation patterns in deepwater areas of the Qiongdongnan Basin

In the Qiongdongnan Basin, faults are well developed.Based on the drilling results, the traps controlled two or more faults are oil-rich. However, when only one fault cut through the sand body, there is no sign for hy-drocarbon accumulation in the sandstone. In terms of this phenomenon, the principle of reservoir-forming controlled by fault terrace is proposed, i.e., when the single fault activates, because of the incompressibility of pore water, the resistance of pore and the direction of buoyancy, it is impossible for hydrocarbon to ac-cumulate in sandstone. But when there are two or more faults, one of the faults acts as the spillway so the hydrocarbon could fill in the pore of sandstone through other faults. In total five gas bearing structures and four failure traps are considered, as examples to demonstrate our findings. According to this theory, it is well-advised that south steep slope zone of Baodao-Changchang Depression, south gentle slope zone of Lingshui Depression, north steep slope zone of Lingshui Depression, and north steep slope zone of Baodao Depression are the most favorable step-fault zones, which are the main exploration direction in next stage.

Reachable set estimation for spacecraft relative motion based on bang-bang principle

For spacecraft formation flight,the information of relative motion reachable set is very important,which can be used to predict the operating boundary of adjacent spacecraft and thus to ensure the safety of spacecraft operation.In this paper,we aim at developing a numerical method to approximate the reachable set for spacecraft relative motion.In particular,we focus on the quality of the approximation and the computational cost.Based on the bang-bang control principle,a polyhedral approximation algorithm is proposed to compute the reachable set of a relative motion spacecraft system.An inner approximation and an outer approximation of the reachable set for the system can be obtained.We prove that the approximation quality measured in Hausdorff distance can be guaranteed.The method is easy to implement and has low computational cost.Finally,the effectiveness of the algorithm is demonstrated by experimental simulation.

Research on Direct Torque Control of Permanent Magnet Synchronous Motor for New Energy Vehicles

This article introduces the control principle,technical status and two commonly used motor control schemes of permanent magnet synchronous motors for new energy vehicles.Direct torque control is selected as the research object,and its advantages and disadvantages with vector control are analyzed.A Simulink simulation model was established according to the control principle.

Stochastic optimal control of cable vibration in plane by using axial support motion

A stochastic optimal control strategy for a slightly sagged cable using support motion in the cable axial direction is proposed. The nonlinear equation of cable motion in plane is derived and reduced to the equations for the first two modes of cable vibration by using the Galerkin method. The partially averaged Ito equation for controlled system energy is further derived by applying the stochastic averaging method for quasi-non-integrable Hamiltonian systems. The dynamical programming equation for the controlled system energy with a performance index is established by applying the stochastic dynamical programming principle and a stochastic optimal control law is obtained through solving the dynamical programming equation. A bilinear controller by using the direct method of Lyapunov is introduced. The comparison between the two controllers shows that the proposed stochastic optimal control strategy is superior to the bilinear control strategy in terms of higher control effectiveness and efficiency.

Common Fixed Point Theorems and Q-property for Quasi-contractive Mappings under c-distance on TVS-valued Cone Metric Spaces without the Normality

In this paper, we derive the stochastic maximum principle for optimal control problems of the forward-backward Markovian regime-switching system. The control system is described by an anticipated forward-backward stochastic pantograph equation and modulated by a continuous-time finite-state Markov chain. By virtue of classical variational approach, duality method, and convex analysis, we obtain a stochastic maximum principle for the optimal control.

Control principles of micro-source inverters used in microgrid

Since micro-sources are mostly interfaced to microgrid by power inverters,this paper gives an insight of the control methods of the micro-source inverters by reviewing some recent documents.Firstly,the basic principles of different inverter control methods are illustrated by analyzing the electrical circuits and control loops.Then,the main problems and some typical improved schemes of theωU-droop grid-supporting inverter are presented.In results and discussion part,the comparison of different kinds of inverters is presented and some notable research points is discussed.It is concluded that the most promising control method should be theωU-droop control,and it is meaningful to study the performance improvement methods under realistic operation conditions in the future work.

Time-optimal control of multiple unmanned aerial vehicles with human control input

Purpose–The purpose of this paper is to investigate time-optimal control problems for multiple unmanned aerial vehicle(UAV)systems to achieve predefined flying shape.Design/methodology/approach–Two time-optimal protocols are proposed for the situations with or without human control input,respectively.Then,Pontryagin’s minimum principle approach is applied to deal with the time-optimal control problems for UAV systems,where the cost function,the initial and terminal conditions are given in advance.Moreover,necessary conditions are derived to ensure that the given performance index is optimal.Findings–The effectiveness of the obtained time-optimal control protocols is verified by two contrastive numerical simulation examples.Consequently,the proposed protocolscan successfully achieve the prescribed flying shape.Originality/value–This paper proposes a solution to solve the time-optimal control problems for multiple UAV systems to achieve predefined flying shape.