Sensitivity of Marine Controllable Source Electromagnetic Soundings for Identifying Plume Migration in Offshore CO_(2) Storage

Offshore carbon dioxide(CO_(2)) storage is an effective method for reducing greenhouse gas emissions. However, when using traditional seismic wave methods to monitor the migration of sequestration CO_(2) plumes, the characteristics of wave velocity changes tend to become insignificant beyond a certain limit. In contrast, the controllable source electromagnetic method(CSEM) remains highly sensitive to resistivity changes. By simulating different CO_(2) plume migration conditions, we established the relevant models and calculated the corresponding electric field response characteristic curves, allowing us to analyze the CSEM's ability to monitor CO_(2) plumes. We considered potential scenarios for the migration and diffusion of offshore CO_(2) storage, including various burial depths, vertical extension diffusion, lateral extension diffusion,multiple combinations of lateral intervals, and electric field components. We also obtained differences in resistivity inversion imaging obtained by CSEM to evaluate its feasibility in monitoring and to analyze all the electric field(Ex, Ey, and Ez) response characteristics. CSEM has great potential in monitoring CO_(2) plume migration in offshore saltwater reservoirs due to its high sensitivity and accuracy. Furthermore, changes in electromagnetic field response reflect the transport status of CO_(2) plumes, providing an important basis for monitoring and evaluating CO_(2)transport behavior during storage processes.

Genetic Algorithm Based Smart Grid System for Distributed Renewable Energy Sources

This work presents the smart grid system for distributed Renewable Energy Sources(RES)with control methods.The hybrid MicroGrids(MG)are trending in small-scale power systems that involve distributed generations,power storage,and various loads.RES of solar are implemented with boost converter using Maximum Power Point Tracking(MPPT)with perturb and observe technique to track the maximum power.Also,the wind system is designed by permanent magnet synchronous generator that includes boost converter with MPPT technique.The battery is also employed with a Direct Current(DC)-DC bidirectional converter,and has a state of charge.The MATLAB/Simulink Simscape software is used to design the proposed model.The switching element of all converters is metal oxide semiconductor field effect transistor.The hybrid system is controlled by a voltage source controller using Proportional Integral Derivative(PID)-Genetic Algorithm(GA),and inductors-capacitors filter is used to reduce the system’s harmonics.Also,smart meters are used for monitoring purposes in residential loads.This paper analyses the performances of the MG against various scenarios.

LoRa Backscatter Network Efficient Data Transmission Using RF Source Range Control

Networks based on backscatter communication provide wireless data transmission in the absence of a power source.A backscatter device receives a radio frequency(RF)source and creates a backscattered signal that delivers data;this enables new services in battery-less domains with massive Internet-of-Things(IoT)devices.Connectivity is highly energy-efficient in the context of massive IoT applications.Outdoors,long-range(LoRa)backscattering facilitates large IoT services.A backscatter network guarantees timeslot-and contention-based transmission.Timeslot-based transmission ensures data transmission,but is not scalable to different numbers of transmission devices.If contention-based transmission is used,collisions are unavoidable.To reduce collisions and increase transmission efficiency,the number of devices transmitting data must be controlled.To control device activation,the RF source range can be modulated by adjusting the RF source power during LoRa backscatter.This reduces the number of transmitting devices,and thus collisions and retransmission,thereby improving transmission efficiency.We performed extensive simulations to evaluate the performance of our method.

Application of integrated geophysical techniques in geothermal exploration in Binhai County, Jiangsu Province

Integrated geophysical technology is a necessary and effective means for geothermal exploration.However,integration of geophysical technology for large‐scale surveys with those for geothermal reservoir localization is still in development.This study used the controlled source audio‐frequency magnetotelluric method technology for large‐scale exploration to obtain underground electrical structure information and micromotion detection technology to obtain underground wave velocity structure information.The combination of two detection technologies was used for local identification of geothermal reservoirs.Further,auxiliary correction and inversion constraint were implemented through the audio magnetotelluric sounding technology for maximum authenticity restoration of the near‐and transition‐field data.Through these technology improvements,a geothermal geological model was established for the Binhai County of Jiangsu Province in China and potential geothermal well locations were identified.On this basis,a geothermal well was drilled nearly 3000m deep,with a daily water volume of over 2000m3/day and a geothermal water temperature of 51°C at the well head.It is found that predictions using the above integrated geophysical exploration technology are in good agreement with the well geological formation data.This integrated geophysical technology can be effectively applied for geothermal exploration with high precision and reliability.

Active source monitoring at the Wenchuan fault zone:coseismic velocity change associated with aftershock event and its implication

With the improvement of seismic observation system, more and more observations indicate that earthquakes may cause seismic velocity change. However, the amplitude and spatial distribution of the velocity variation remains a controversial issue. Recent active source monitoring carried out adjacent to Wenchuan Fault Scientific Drilling （WFSD） revealed unambiguous coseismic velocity change associated with a local M8 5.5 earthquake. Here, we carry out forward modeling using two-dimensional spectral element method to further investigate the amplitude and spatial distribution of observed velocity change. The model is well constrained by results from seismic reflection and WFSD coring. Our model strongly suggests that the observed coseismic velocity change is localized within the fault zone with width of ~ 120 m rather than dynamic strong ground shaking. And a velocity decrease of -2.0 % within the fault zone is required to fit the observed travel time delay distribution, which coincides with rock mechanical experiment and theoretical modeling.

Carbon sequestration of plantation in Beijing-Tianjin sand source areas

The Beijing-Tianjin Sand Source Control Project(BTSSCP), a national ecological restoration project, was launched to construct an ecological protection system in the Beijing-Tianjin sand source areas to reduce dust hazards. The carbon sequestration dynamics can be used to assess the ecological effects of an ecological restoration project. Here, we conducted vegetation and soil study to assess the carbon sequestration in the plantations with 10 years old stands in Beijing-Tianjin sand source areas. The results at the site scales indicated that the average net increase of plantation ecosystem carbon stock was 33.8 Mg C ha^(-1), with an annual increase rate of 3.38 Mg C ha^(-1) yr^(-1). The average net increase of carbon varied among regions, vegetation types, and forest management activities. Soil bulk density in the top soil decreased slightly after 10-year implementation of the project. Coniferous forests and shrubs are suitable plant species for sand source areas.Natural restoration in the plantations is a practical and feasible and promising approach for enhancing ecosystem carbon sequestration potential.

The Roles of Countrywomen in Controlling Non-point Source Pollution

The main causes of non-point source pollution in Taihu Lake are the improper ways of crop production, animal husbandry, and daily runoff. The paper discusses the relationship between countrywomen and non-point source pollution control by 731 questionnaires in Weidu village and 466 questionnaires in Dapu Town. The roles of countrywomen have changed in families and they have close relationship with non-point source pollution. Furthermore, we discuss the possibility and methods of organizing countrywomen in non-point source pollution control.

Online Learning Control for Harmonics Reduction Based on Current Controlled Voltage Source Power Inverters

Nonlinear loads in the power distribution system cause non-sinusoidal currents and voltages with harmonic components.Shunt active filters(SAF) with current controlled voltage source inverters(CCVSI) are usually used to obtain balanced and sinusoidal source currents by injecting compensation currents.However,CCVSI with traditional controllers have a limited transient and steady state performance.In this paper,we propose an adaptive dynamic programming(ADP) controller with online learning capability to improve transient response and harmonics.The proposed controller works alongside existing proportional integral(PI) controllers to efficiently track the reference currents in the d-q domain.It can generate adaptive control actions to compensate the PI controller.The proposed system was simulated under different nonlinear(three-phase full wave rectifier) load conditions.The performance of the proposed approach was compared with the traditional approach.We have also included the simulation results without connecting the traditional PI control based power inverter for reference comparison.The online learning based ADP controller not only reduced average total harmonic distortion by 18.41%,but also outperformed traditional PI controllers during transients.

Induced polarization in a 2.5D marine controlled source electromagnetic field based on the adaptive finite-element method

The induced polarization （IP） in rocks and minerals is of significance to the marine controlled-source electromagnetic （CSEM） field. We propose an adaptive finite-element algorithm for the 2.5D frequency-domain forward modeling of marine CSEM that considers the induced polarization. The geoelectrical model is discretized using an unstructured triangular elemental grid that accommodates the complex topography and geoelectrical structures. We use the Cole-Cole model to describe the IP and develop a complex resistivity forward modeling algorithm. We compare the simulation results with published 1D model results and subsequently calculate the electromagnetic field for variable azimuth sources, IP parameters, and topography. Finally, we analyze the IP effect on the marine CSEM field and show that IP of oil reservoirs and topography affects the marine CSEM electromagnetic field.

Source Rock and Cap Rock Controls on the Upper Ordovician Wufeng Formation–Lower Silurian Longmaxi Formation Shale Gas Accumulation in the Sichuan Basin and its Peripheral Areas

Objective The Upper Ordovician Wufeng Formation-Lower Silurian Longmaxi Formation is one of the priority interval for shale gas exploration in the Sichuan Basin and its peripheral areas, and commercial shale gas has been discovered from this interval in Jiaoshiba, Changning and Weiyuan shale gas fields in Sichuan Province. However, there is no significant discovery in other parts of the basin due to the different quality of black shale and the differences of tectonic evolution. Based on the progress of shale gas geological theory and exploration discoveries, as well as the theory of ＂source rock and cap rock controls on hydrocarbon accumulation＂, of the Upper Ordovician the main controlling factors Wufeng Formation-Lower Silurian Longmaxi Formation shale gas enrichment in the Sichuan Basin and its peripheral areas were analyzed, and the source rock and cap rock controls on the shale gas were also discussed. The results can provide new insights for the next shale gas exploration in this area.

Seasonal differences in climatic controls of vegetation growth in the Beijing–Tianjin Sand Source Region of China

Launched in 2002, the Beiing–Tianjin Sand Source Control Project (BTSSCP) is an ecological restoration project intended to prevent desertification in China. Evidence from multiple sources has confirmed increases in vegetation growth in the BTSSCP region since the initiation of this project. Precipitation and essential climate variable-soil moisture (ECV-SM) conditions are typically considered to be the main drivers of vegetation growth in this region. Although many studies have investigated the inter-annual variations of vegetation growth, few concerns have been focused on the annual and seasonal variations of vegetation growth and their climatic drivers, which are crucial for understanding the relationships among the climate, vegetation, and human activities at the regional scale. Based on the normalized difference vegetation index (NDVI) derived from MODIS and the corresponding climatic data, we explored the responses of vegetation growth to climatic factors at annual and seasonal scales in the BTSSCP region during the period 2000–2014. Over the study region as a whole, NDVI generally increased from 2000 to 2014, at a rate of 0.002/a. Vegetation growth is stimulated mainly by the elevated temperature in spring, whereas precipitation is the leading driver of summer greening. In autumn, positive effects of both temperature and precipitation on vegetation growth were observed. The warming in spring promotes vegetation growth but reduces ECV-SM. Summer greening has a strong cooling effect on land surface temperature. These results indicate that the ecological and environmental consequences of ecological restoration projects should be comprehensively evaluated.

RESEARCH ON TECHNOLOGY OF CONTROLLED SOURCE RADIO MAGNETOTELLURIC SYSTEM'S TRANSMITTER

The basic theory and principle of the artificial Controlled Source Radio Magneto Telluric(CSRMT) method is studied and a novel CSRMT transmitter in kH z frequency band is designed. The specific circuit and measured results of some key modules in transmitter are presented, and some outdoor experimental tests have been carried out, which shows that the completed prototype of transmitter can generate a continuous sine current with frequency up to 35.33 k Hz, peak-to-peak amplitude up to 40 A, and realize a reliable transmitting mode with multi-frequency and high-current. The transmitter has a wide operating band, large magnetic moment and high waveform fidelity, and can meet the requirements of shallow geological exploration with high-resolution.

Design and Application of the Automatic Monitoring System for Wastewater Source in Shandong Province

In order to realize real-time online monitoring of the wastewater source enterprises,manage and issue monitoring information,this paper comprehensively uses automatic control,embedded data acquisition and transmission,distributed computing and data processing,geographic information system,etc.to develop automatic monitoring system of the wastewater source in Shandong Province.This system incorporates automatic monitoring information acquisition,transmission and daily work as an organic whole.The system realizes not only the continuous online monitoring of wastewater source enterprise,but also the deep excavation and utilization on monitoring information.It provides scientific and objective basis for energy saving,consumption reduction,carbon emission reduction,total amount control and other environmental management works,and meets the requirements of environmental management and related departments to wastewater source management.

Advances in particulate matter filtration:Materials,performance,and application

Air-borne pollutants in particulate matter(PM)form,produced either physically during industrial processes or certain biological routes,have posed a great threat to human health.Particularly during the current COVID-19 pandemic,effective filtration of the virus is an urgent matter worldwide.In this review,we first introduce some fundamentals about PM,including its source and classification,filtration mechanisms,and evaluation parameters.Advanced filtration materials and their functions are then summarized,among which polymers and MOFs are discussed in detail together with their antibacterial performance.The discussion on the application is divided into end-of-pipe treatment and source control.Finally,we conclude this review with our prospective view on future research in this area.

Importance of timely and adequate source control in sepsis and septic shock

Source control is defined as the physical measures undertaken to eliminate the source of infection and control ongoing contamination, as well as restore anatomy and function at the site of infection. It is a key component of the management of patients with sepsis and septic shock and one of the main determinants of the outcome of infections that require source control. While not all infections may require source control, it should be considered in every patient presenting with sepsis;it is applicable and necessary in numerous infections, not only those occurring in the abdominal cavity. Although the biological rationale is clear, several aspects of source control remain under debate. The timing of source control may impact outcome;early source control is particularly relevant for patients with abdominal infections or necrotizing skin and soft tissue infections, as well as for those with more severe disease. Percutaneous procedures are increasingly used for source control;nevertheless, surgery—tailored to the patient and infection—remains a valid option for source control. For outcome optimization, adequate source control is more important than the strategy used. It should be acknowledged that source control interventions may often fail, posing a challenge in this setting. Thus, an individualized, multidisciplinary approach tailored to the infection and patient is preferable.

Numerical simulation and method study of X-ray litho-density logging

To effectively replace the isotope radiation source in litho-density logging,this study presents a method for measuring the formation density and photoelectric absorption index(Pe)using a switchable X-ray tube.First,the gamma-ray litho-density logging(GLD)method for measuring formation density and Pe using chemical sources is introduced.Then,a benchmark verification based on the X-ray litho-density logging tool prototype and data published by Simon(In:Paper presented at the SPWLA 59th annual logging symposium,London,UK,2018)was carried out using Monte Carlo numerical simulations.Second,the impacts of the photoelectric effect and detector statistical error on the GLD method were analyzed.Finally,based on a theoretical analysis,the formation density and Pe measurement algorithm(double energy window(DEW)method)was improved,which was found to be suitable for X-ray litho-density logging.Moreover,the results obtained using this algorithm were compared with those obtained using the GLD method.The results indicate that owing to the impact of photoelectric effect and detector statistical error on the density energy window,the accuracy of formation density and Pe measurement using the GLD method is relatively low,with the uncertainty in formation density and Pe measurement reaching 2.620±0.047 g/cm3 and 4.090±0.580 b/e,respectively.In comparison,the DEW method can improve the accuracy of density and Pe measurement to 0.006 g/cm3 and 0.065 b/e,respectively,as the photoelectric effect in the density window is corrected using the counts in the lithology window of the energy spectrum.This study aims to provide a new theoretical foundation for processing X-ray litho-density logs in the future.

Quantitative Analysis Model and Application of the Hydrocarbon Distribution Threshold

Hydrocarbon source rock obviously controls the formation and distribution of hydrocarbon reservoirs. Based on the geological concept of ＂source control theory＂, the concept of a hydrocarbon distribution threshold was put forward. This means the maximum range for hydrocarbon controlled by the source rock conditions to migrate in the hydrocarbon basins. Three quantitative analysis models are proposed on this basis, namely the hydrocarbon accumulation probability, maximum hydrocarbon scale threshold and reserve distribution probability, which respectively refer to the probability of forming a hydrocarbon reservoir, the possible maximum scale of the hydrocarbon reservoir and the percentage of reserve distribution in a certain area within the hydrocarbon distribution threshold. Statistical analysis on 539 hydrocarbon reservoirs discovered in 28 hydrocarbon source kitchens from seven sedimentary basins and sags of eastern China shows the maximum reservoir scale possibly formed in the hydrocarbon basin, hydrocarbon accumulation probability and oil and gas reserve distribution probability are all controlled by the characteristics of the hydrocarbon source rock. Generally, as the distances from the hydrocarbon source rock center and hydrocarbon discharge boundary get longer and the hydrocarbon discharge intensity of hydrocarbon source rock center gets smaller, there will be lower probability of hydrocarbon accumulation. Corresponding quantitative models are established based on single factor statistics and multivariate analysis. Practical application in the Jiyang Depression shows that the prediction from the quantitative analysis model for the hydrocarbon distribution threshold agree well with the actual exploration results, indicating that the quantitative analysis model is likely to be a feasible tool.

Research on Control Strategy of Grid-connected Brushless Doubly-fed Wind Power System Based on Virtual Synchronous Generator Control

The brushless doubly-fed wind power system based on conventional power control strategies lacks ‘inertia’ and the ability to support grid,which leads to the decline of grid stability.Therefore,a control strategy of brushless doubly-fed reluctance generator(BDFRG) based on virtual synchronous generator(VSG) control is proposed to solve the problem in this paper.The output characteristics of BDFRG based on VSG are similar to a synchronous generator(SG),which can support the grid frequency and increase the system ‘inertia’.According to the mathematical model of BDFRG,the inner loop voltage source control of BDFRG is derived.In addition,the specific structure and parameter selection principle of outer loop VSG control are expounded.The voltage source control inner loop of BDFRG is combined with the VSG control outer loop to establish the overall architecture of BDFRG-VSG control strategy.Finally,the effectiveness and feasibility of the proposed strategy are verified in the simulation.

ACOUSTICAL TRANSMISSION LINE MODEL FOR ULTRASONIC TRANSDUCERS FOR WIDE-BANDWIDTH APPLICATION

An improved model for ultrasonic transducers is proposed. By considering only the first symmetric mode, each layer is represented as an acoustical transmission line in modeling of bulk wave transducers. In imaging applications, wide bandwidth and short time duration are required. The approach we have used consists of impedance matching the front face of the piezoelectric transducer to the propagating medium with a quarter wavelength impedance matching layer and inserting an nnmatching quarter wavelength acoustical layer between the rear face and backing material. A heavy backing would degrade the wide-band phenomena, but show a time duration shorter than 0.5 μs for imaging applications. PSPICE code of the controlled source model is implemented to precisely predict the performance of the matched transducers such as impedance, insertion loss, bandwidth and duration of the impulse response. Good agreement between the simulation and experimental results has been achieved.