期刊文献+

二次检索

题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

年份

学科

共找到250篇文章
< 1 2 13 >
每页显示 20 50 100
The most economic cavity quantity in injection mould CAD based on concurrent engineering
1
作者 轩景泉 郎利辉 +1 位作者 康达昌 朱宝泉 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2000年第1期30-34,共5页
Presents the conception of concurrent engineering employed for CAD/CAM of injection moulds by closely combining the management science with the manufacturing techniques with the cost of processing, material cost, etc ... Presents the conception of concurrent engineering employed for CAD/CAM of injection moulds by closely combining the management science with the manufacturing techniques with the cost of processing, material cost, etc taken into consideration from the conceptural design to delivery of products and concludes with the results of analyses that the cost of finished plastic parts is lower, the production efficiency is higher while energy is saved. 展开更多
关键词 injection mould cad CONCURRENT engineering the MOST ECONOMIC CAVITY quantity
下载PDF
The Comparison Between Finite Element Analysis and Experimental Results of the Cooling of Injection Moulds with Hot Runner System
2
作者 Y F Sun K S Lee +1 位作者 C H Tan A Y C Nee 《厦门大学学报(自然科学版)》 CAS CSCD 北大核心 2002年第S1期110-111,共2页
In an injection moulding process, the mould cooling s ystem is very important as an efficient and uniform cooling effect can improve b oth the productivity and part quality. Due to the complexity of the process, muc h... In an injection moulding process, the mould cooling s ystem is very important as an efficient and uniform cooling effect can improve b oth the productivity and part quality. Due to the complexity of the process, muc h research on the mould cooling analysis and cooling design optimization has bee n focused on the core and the cavity, excluding other systems of injection mould s. However, the runner system introduces a considerable amount of heat into the mould. In recent years, more and more hot runner systems are being applied in th e moulding industry to save material and decrease losses of injection pressure. This raises the need to include the hot runner system in the cooling analysis. I n this paper, a photo frame part was studied. The mould was built with a hot run ner system. Two thermal sensors were installed: one measures the temperature of lateral surface of hot runner nozzle; the other measures the plastic temperature from the core side. A pressure sensor was also installed to measure the pressur e of the core impression. Cooling analysis was performed using ABAQUS, ananalysi s software based on the Finite Element Method (FEM). The assembly including core , cavity and plastic part was modeled. Heat conduction from hot runner to cavity and from polymer melt to the mould and force convection on the cooling channel surfaces were studied. The natural convection between the ambient air and the ex terior mould surface was ignored. The simulations were adjusted with the experim ental results to find out the heat input from hot runner and its influence on mo uld cooling. Finally, the optimal cooling design and optimal injection condition were obtained. 展开更多
关键词 injection moulding cooling injection mould cool ing finite element method hot runner
下载PDF
基于系统集成的注塑模 CAD/CAE/CAM 系统的设计与实现 被引量:1
3
作者 徐艺 王兆远 +1 位作者 黄瑞清 张永清 《机械科学与技术》 CSCD 北大核心 1997年第5期917-921,共5页
采用系统集成的方法,以通用CAD/CAM系统UGI及注塑模分析软件Moldflow为平台,并应用UGI的二次开发工具USERFUNCTION,对基于并行工程的注塑模CAD/CAE/CAM系统的设计和实现进行了研究和探讨。
关键词 注塑模 cad/CAE/CAM 系统集成 并行工程
下载PDF
注塑模结构 CAD 的设计流程与装配模型
4
作者 张佑生 田卫东 《合肥工业大学学报(自然科学版)》 CAS CSCD 1998年第2期1-7,共7页
文章首先对注塑模结构CAD的重要性及尚存在的问题进行分析。接着提出在注塑模CAD三维系统的基础上采用“自顶向下”的设计流程,对实现该流程的关键技术进行讨论,提出了塑件骨架构型、模具符号零件、装配模型等概念。此外,还对... 文章首先对注塑模结构CAD的重要性及尚存在的问题进行分析。接着提出在注塑模CAD三维系统的基础上采用“自顶向下”的设计流程,对实现该流程的关键技术进行讨论,提出了塑件骨架构型、模具符号零件、装配模型等概念。此外,还对参数化设计技术在注塑模结构CAD柔性化方面的应用进行了讨论。 展开更多
关键词 注塑模 cad 结构设计 装配模型 参数化设计
下载PDF
A Case Study of Heat Transfer from Hot Runner Mould to the Fix Platen of the Injection-moulding Machine
5
作者 C H Tan K S Lee 《厦门大学学报(自然科学版)》 CAS CSCD 北大核心 2002年第S1期97-98,共2页
In an injection moulding process, the parallelism b et ween the tie bars of the injection moulding machine is very important as it will affect the mould closing and clamping system. In recent years, more and more ho t... In an injection moulding process, the parallelism b et ween the tie bars of the injection moulding machine is very important as it will affect the mould closing and clamping system. In recent years, more and more ho t runner systems are being applied in the moulding industry to save material and decrease the losses of injection pressure. Heat transfer from hot runner system from the fixed half which is secured in the fix machine platen could transmit s o much heat that it may cause high temperature differential between the machine fix platen and moving platen. This will cause the tie bar to become unparallel. Part quality will be compromised and the wear of the tie bar will be excessive. Overhaul of the tie bar may be necessary after a short period of time which is c ostly. This raises the need to analyze the heat transfer from the hot runner sys tem to the machine fix platen and the methods of isolating or minimizing the hea t transfer. In this case study, a photo lens article mould was used. The mould w as built with a direct hot runner nozzle system. Heat conduction from hot runner and machine screw to machine fix platen were studied based on either using high temperature heat insulating plate put in placed between the mould and the mould ing machine fix platen or drill cooling channels in the front mould clamping pla te. The high temperature insulator is very costly as it is made out of glass re inforced polymer composite material. Experimental results were obtained and anal yzed to find the best method to minimize the unwanted heat transfer using the ch eapest and most effective method. 展开更多
关键词 injection moulding cooling hot runner system i njection moulding machine platen tie bar
下载PDF
面向CAD/CAE集成的注塑模冷却系统特征识别 被引量:7
6
作者 李庆 张龙 +1 位作者 黄志高 周华民 《中国机械工程》 EI CAS CSCD 北大核心 2013年第8期1042-1046,共5页
提出了一种基于图的冷却系统特征识别方法,并将该方法应用于注塑模CAD/CAE集成。针对注塑模冷却系统的结构特点,定义了一组推断规则。对注塑模三维CAD模型中包含冷却系统的模板建立面边图,利用推断规则识别出面边图中的冷却系统特征子图... 提出了一种基于图的冷却系统特征识别方法,并将该方法应用于注塑模CAD/CAE集成。针对注塑模冷却系统的结构特点,定义了一组推断规则。对注塑模三维CAD模型中包含冷却系统的模板建立面边图,利用推断规则识别出面边图中的冷却系统特征子图,进而对识别出的冷却回路数据进行提取和优化,并转换成CAE分析所需的格式。以此为基础,在UG平台上开发了注塑模冷却系统CAD/CAE集成模块,实现了冷却系统模型从CAD到CAE系统的自动重构,避免了不同系统之间的重复建模。 展开更多
关键词 冷却系统 特征识别 cad CAE集成 注塑模
下载PDF
基于CAD/CAE技术的超薄手机外壳模具设计 被引量:5
7
作者 彭响方 林海杰 +2 位作者 孙树秋 陈景侦 洪智填 《工程塑料应用》 CAS CSCD 北大核心 2007年第8期56-59,共4页
以某品牌手机模型为例,分析了其外壳结构特征,利用Pro/E软件设计了手机外壳及其注塑模具,选用Moldflow软件对模具设计进行优化分析。结果表明,使用CAD/CAE技术可以大大缩短制品的开发周期,降低设计成本,优化注塑模具设计,提高企业的市... 以某品牌手机模型为例,分析了其外壳结构特征,利用Pro/E软件设计了手机外壳及其注塑模具,选用Moldflow软件对模具设计进行优化分析。结果表明,使用CAD/CAE技术可以大大缩短制品的开发周期,降低设计成本,优化注塑模具设计,提高企业的市场竞争力。 展开更多
关键词 cad/CAE Moldflow手机外壳 注塑模
下载PDF
基于CAD/CAE的音响面板双腔热流道注射模设计 被引量:4
8
作者 黄继战 范玉 +1 位作者 侯世赟 仇文宁 《工程塑料应用》 CAS CSCD 北大核心 2018年第12期96-100,共5页
通过对音响面板的工艺性分析,借助CAD/CAE软件设计了一套一模两腔的四面侧抽芯热流道注射模具。详细分析并设计了该模具分型面与型腔布局、热流道浇注系统、抽芯机构和脱模机构等关键结构,阐述了该模具的工作过程。该模具采用了冷热流... 通过对音响面板的工艺性分析,借助CAD/CAE软件设计了一套一模两腔的四面侧抽芯热流道注射模具。详细分析并设计了该模具分型面与型腔布局、热流道浇注系统、抽芯机构和脱模机构等关键结构,阐述了该模具的工作过程。该模具采用了冷热流道结合的热流道浇注系统,通过2个潜伏式浇口从面板底部进料,保证了塑件外观质量,并使塑件脱模时凝料自动切除。实践证明,该模具设计合理,运行平稳,不仅提高了成型面板的质量,而且节省了材料,缩短了成型周期,可为面板类热流道模具的设计提供借鉴。 展开更多
关键词 热流道 注射模 计算机辅助设计 计算机辅助工程 面板
下载PDF
基于特征和知识的注塑模CAD/CAE集成化研究 被引量:6
9
作者 石 峰 娄臻亮 张永清 《计算机工程》 CAS CSCD 北大核心 2002年第4期64-66,161,共4页
重点讨论了利用特征造型技术和人工智能技术进行CAD/CAE集成的方法,并对系统集成的关键技术进行了研究。在对产品建模过程中,针对问题的不同特点采用不同的方法对知识进行提取和推理,最终目的是提高注塑模设计的自动化程度,实现设计--... 重点讨论了利用特征造型技术和人工智能技术进行CAD/CAE集成的方法,并对系统集成的关键技术进行了研究。在对产品建模过程中,针对问题的不同特点采用不同的方法对知识进行提取和推理,最终目的是提高注塑模设计的自动化程度,实现设计--分析的自适应。 展开更多
关键词 注塑模 cad CAE 集成 特征造型 知识工程 知识提取 塑料加工
下载PDF
模具CAD/CAE/CAM的发展概况及趋势 被引量:98
10
作者 李德群 肖祥芷 《模具工业》 北大核心 2005年第7期9-12,共4页
介绍了级进模、汽车覆盖件模和塑料注射模CAD/CAE/CAM的发展概况并论述了这三种模具CAD/CAE/CAM的最新开发成果和发展趋势。
关键词 级进模 汽车覆盖件模 塑料注射模 cad/CAE/CAM
下载PDF
基于Pro/E和MasterCAM环境下注塑模CAD/CAM 被引量:3
11
作者 陶筱梅 黄玉新 +1 位作者 陈银清 杜小清 《煤矿机械》 北大核心 2006年第5期807-809,共3页
介绍了Pro/E在注塑模具设计中的应用以及在MasterCAM环境下的CAM实现。通过手机上盖模具设计实例,阐述了Pro/Moldesign的模具设计流程与技术优势。并运用MasterCAM对手机上盖凸模进行了加工刀路设计,模拟其加工过程。
关键词 PRO/E MASTERCAM 注塑模 cad/CAM
下载PDF
注射模CAD/CAM/CAE集成技术研究 被引量:5
12
作者 易际明 吴莉华 《轻工机械》 CAS 北大核心 2004年第2期30-32,共3页
模具是工业生产中重要的工艺装备 ,是国民经济各部门发展的重要基础之一。基于 Pro/Engineer的参数化特征设计方法 ,为模具设计和制造提供了很好的途径 ,成为现代注射模 CAD/CAM领域的重要研究方向。本文对注射模CAD/CAM/CAE技术进行了... 模具是工业生产中重要的工艺装备 ,是国民经济各部门发展的重要基础之一。基于 Pro/Engineer的参数化特征设计方法 ,为模具设计和制造提供了很好的途径 ,成为现代注射模 CAD/CAM领域的重要研究方向。本文对注射模CAD/CAM/CAE技术进行了深入的分析 ,并给出了应用实例。 展开更多
关键词 注射模 cad/CAM/CAE集成技术 参数化特征设计方法 模具设计 PRO/ENGINEER
下载PDF
基于装配的注射模二维参数化CAD系统 被引量:4
13
作者 何汉武 陈新 +4 位作者 郑德涛 孙健 尹周平 熊有伦 钱鲁泓 《机械》 北大核心 1998年第6期31-32,36,共3页
介绍了在微机上开发的基于装配的注射模二维参数化CAD系统。即从装配几何模型开始,采用参数化方法进行模具结构设计。最后由计算机输出模具装配图、零件图、物料清单(BOM)等信息。提出了基于装配的模具设计框架。介绍了参数化... 介绍了在微机上开发的基于装配的注射模二维参数化CAD系统。即从装配几何模型开始,采用参数化方法进行模具结构设计。最后由计算机输出模具装配图、零件图、物料清单(BOM)等信息。提出了基于装配的模具设计框架。介绍了参数化图库管理及图形实例化操作和物料清单生成等关键技术。 展开更多
关键词 cad 注射模 参数化 装配模型
下载PDF
注射模CAD二次开发平台的设计与实现 被引量:2
14
作者 周华民 李德群 张宜生 《塑料科技》 CAS 1998年第6期47-49,共3页
在分析AutoCAD不足的基础上,规划了AutoCAD环境下注射模CAD二次开发平台的设计目标与功能模块,介绍了各个模块的实现方法。
关键词 cad 塑料制品 注塑成型 模具
下载PDF
吊灯塑料灯罩注射模具CAD 被引量:4
15
作者 王志伟 苗利军 孟玲琴 《塑料工业》 CAS CSCD 北大核心 2014年第7期54-57,76,共5页
以家用吊灯塑料灯罩注射模具为例,通过对充模过程的流动模拟分析,得到了注射压力、气穴、熔接线、充模时间、温度、剪切应力及锁模力分布图。经过模拟分析,提前发现了可能出现的塑件成型缺陷,提高了塑料注射模具一次试模的成功率,实现... 以家用吊灯塑料灯罩注射模具为例,通过对充模过程的流动模拟分析,得到了注射压力、气穴、熔接线、充模时间、温度、剪切应力及锁模力分布图。经过模拟分析,提前发现了可能出现的塑件成型缺陷,提高了塑料注射模具一次试模的成功率,实现了缩短模具设计周期,降低模具制造成本的目的。 展开更多
关键词 cad 塑料注射模 充模 浇口 模拟分析
下载PDF
实用化塑料注射模CAD系统 被引量:2
16
作者 周华民 李德群 张宜生 《中国塑料》 CAS CSCD 北大核心 1999年第1期75-79,共5页
通过对塑料注射模设计过程的分析,构造了一个实用型的塑料注射模CAD系统—HSCAD,介绍了系统的主要特点及其实用化特征,分析了其中的关键技术。
关键词 塑料 注射模 cad 建模 建具
下载PDF
基于Pro/E,Moldflow和MasterCAM平台下注射模的CAD/CAE/CAM 被引量:4
17
作者 刘细芬 黄家广 《锻压技术》 CAS CSCD 北大核心 2008年第4期92-95,共4页
介绍了Pro/E在注射模具设计中的应用和基于Moldflow软件的注塑成形分析以及在MasterCAM环境下的CAM实现。通过实例,阐述了采用CAD/CAE软件进行注射模设计和分析的过程,并运用MasterCAM对该结构件侧型腔模进行了加工刀路设计,模拟其加工... 介绍了Pro/E在注射模具设计中的应用和基于Moldflow软件的注塑成形分析以及在MasterCAM环境下的CAM实现。通过实例,阐述了采用CAD/CAE软件进行注射模设计和分析的过程,并运用MasterCAM对该结构件侧型腔模进行了加工刀路设计,模拟其加工过程。采用CAD/CAE/CAM技术可以缩短产品的开发周期,提高设计质量。 展开更多
关键词 注塑模 cad/CAE/CAM PRO/E MOLDFLOW MASTERCAM
下载PDF
基于三维构型的切片体素构造法及其注射模CAD系统 被引量:1
18
作者 柳和生 辛勇 +1 位作者 王海才 董才胜 《塑性工程学报》 CAS CSCD 2001年第4期77-80,共4页
基于AutoCAD工作平台 ,以箱体类塑件为对象开发了一种注射模CAD系统。该系统提出了 3种新的切片体素 :圆台切片体素、垂直拉伸切片体素和倾斜拉伸切片体素。利用其切片体素构造法 ,将二维塑件图形作为输入单元 ,通过拾取边界多义线环来... 基于AutoCAD工作平台 ,以箱体类塑件为对象开发了一种注射模CAD系统。该系统提出了 3种新的切片体素 :圆台切片体素、垂直拉伸切片体素和倾斜拉伸切片体素。利用其切片体素构造法 ,将二维塑件图形作为输入单元 ,通过拾取边界多义线环来构造塑件三维几何形状 ,从而实现了由二维图形数据输入获得三维几何造型这一关键技术。 展开更多
关键词 三维构型 注射模 cad系统 切片体素构造法 模具
下载PDF
注射模具CAD制图标准体系 被引量:2
19
作者 顾正亮 潘巍 刘展 《工程塑料应用》 CAS CSCD 北大核心 2003年第11期51-53,共3页
以Visual Basic 6.0为工具建立的注射模具CAD制图标准查询系统,可用于CAD设计注射模具所需的CAD制图标准、机械制图标准、设计标准等各种标准的查询。该系统界面友好、操作简便,是用CAD设计注射模具的良好助手,使用者还可以对其加以扩... 以Visual Basic 6.0为工具建立的注射模具CAD制图标准查询系统,可用于CAD设计注射模具所需的CAD制图标准、机械制图标准、设计标准等各种标准的查询。该系统界面友好、操作简便,是用CAD设计注射模具的良好助手,使用者还可以对其加以扩充和更新。 展开更多
关键词 注射模具 cad 制图标准 VISUALBASIC6.0 塑料 成型加工
下载PDF
多孔复杂型腔塑件注塑模具CAD/CAE数字化研究 被引量:5
20
作者 郭永环 范希营 《制造技术与机床》 CSCD 北大核心 2012年第2期151-154,共4页
在UG中建立了塑件的三维数据图,借助模流分析(Moldflow)软件对塑件注射压力、时间、温度、浇注系统进行计算机辅助工程分析(CAE),确定最优的注射压力、注射时间、模具温度、熔体温度、浇口位置及流道等。优化了注塑工艺参数、注塑模具... 在UG中建立了塑件的三维数据图,借助模流分析(Moldflow)软件对塑件注射压力、时间、温度、浇注系统进行计算机辅助工程分析(CAE),确定最优的注射压力、注射时间、模具温度、熔体温度、浇口位置及流道等。优化了注塑工艺参数、注塑模具的设计,确定了最佳的注塑工艺方案,快速成型出优质的塑料制品,提高了模具的质量,缩短了模具的开发周期。 展开更多
关键词 多孔复杂型腔 注塑模具 模流分析 cad/CAE
下载PDF
上一页 1 2 13 下一页 到第
使用帮助 返回顶部