In this paper a system combining a diesel reformer using catalytic partial oxidation （CPOX） with the Solid Oxide Fuel Cell （SOFC） for Auxiliary Power Unit （APU） applications is modeled with respect to the coolin...In this paper a system combining a diesel reformer using catalytic partial oxidation （CPOX） with the Solid Oxide Fuel Cell （SOFC） for Auxiliary Power Unit （APU） applications is modeled with respect to the cooling effect provided by internal reforming of methane in anode gas channel. A model mixture consisting of 80% n-hexadecane and 20%..!-methylnaphthalin is used to simulate the commercial diesel. The modelling consists of several steps. First, equilibrium gas composition at the exit of CPOX reformer is modelled in terms oxygen to car- bon （O/C） ratio, fuel utilization ratio and anode gas recirculation. Second, product composition, especially methane content, is determined for the me.th.an, ation process at the operating temperatures ra：ng!ng from 500 ℃to 520 ℃.Finally, the cooling power provided by internal reforming of methane in SOFC fuel channel is calculated for two concepts to increase the methane content of the diesel reformate. The results show that the first concept, operating the diesel reformer at low O/C ratio and/or, recirculation rat!o, is not realizable due to high probability of coke formation, whereas the second concept, combining a methanation process with CPOX, can provide a significant cool- ing effect in addition to the conventional c？oling concept which needs higher levels of excess air.展开更多
Pain and local complications are the major determinants of outcome after inguinal hernia repair. To evaluate the respective impact of peri-operative cooling of surgical site and usual care after open inguinal hernia r...Pain and local complications are the major determinants of outcome after inguinal hernia repair. To evaluate the respective impact of peri-operative cooling of surgical site and usual care after open inguinal hernia repair, we performed a prospective randomized study. Methods: One hundred and eight consecutive patients with primary unilateral inguinal hernia were included the study. Repair was performed by local direct access during ambulatory surgery. The first study group underwent standard pre- and postoperative local care (control group). In the second group (cold compress group), a single-use disposable sterile cold compress was applied on the surgical site for at least 30 minutes before and 2 hours after surgery. Primary endpoints were immediate postoperative pain using a visual analogue scale, and local complications. Secondary endpoints included: analgesic drug consumption, length of hospital stay, delay to return to normal activity and patient satisfaction. Results: There was no difference concerning operative time (36.3 ± 14.0 vs 39.6 ± 7.2 minutes) and early (one-week) complications, although there was a non significant reduced incidence of hematoma and ecchymosis (0/54 versus 4/54) for the cold compress group. Analgesic drug consumption was significantly (p = 0.01) reduced. During the day of surgery and the first postoperative day, the visual analogue scale was significantly lower after cooling. There was a non-significant reduction in length of hospital stay (150 ± 37 versus 210 ± 47 min), and time to return to normal activity was shorter in the cold compress group. Conclusion: For open inguinal hernia repair, immediate pre- and post operative surgical site cooling, targeting a controlled temperature between 12?C and 15?C significantly reduced postoperative pain, analgesic drug consumption and resulted in improved immediate outcomes. This technique is safe, simple, easy to use, inexpensive and well tolerated by the patient.展开更多
The reformation of (Bi,Pb)-2223 from the liquid or melt is very important for a melting process of (Bi,Pb)-2223 tape. By combination of quenching experiment with X-ray diffraction (XRD) analysis, the effect of cooling...The reformation of (Bi,Pb)-2223 from the liquid or melt is very important for a melting process of (Bi,Pb)-2223 tape. By combination of quenching experiment with X-ray diffraction (XRD) analysis, the effect of cooling rate on the evolution of three superconducting phases in the (Bi,Pb)-2223 core of Ag-sheathed tape was investigated. The results show that (Bi,Pb)-2223 reformation from the melt seems to experience different routes during slowly cooling at different rates. One is that (Bi,Pb)-2223 phase reformed directly from the melt, and no Bi-2212 participate in this process. The other is that (Bi,Pb)-2223 is converted from the intermediate product, Bi-2212, which formed from the melt during the first cooling stage. Due to the inherent sluggish formation kinetics of (Bi,Pb)-2223 from Bi-2212, only partial (Bi,Pb)-2223 can finally be reformed with the second route.展开更多
基金Supported by the Ministry of the Environment, Climate Protection and the Energy Sector, Baden-Wuettermberg
文摘In this paper a system combining a diesel reformer using catalytic partial oxidation （CPOX） with the Solid Oxide Fuel Cell （SOFC） for Auxiliary Power Unit （APU） applications is modeled with respect to the cooling effect provided by internal reforming of methane in anode gas channel. A model mixture consisting of 80% n-hexadecane and 20%..!-methylnaphthalin is used to simulate the commercial diesel. The modelling consists of several steps. First, equilibrium gas composition at the exit of CPOX reformer is modelled in terms oxygen to car- bon （O/C） ratio, fuel utilization ratio and anode gas recirculation. Second, product composition, especially methane content, is determined for the me.th.an, ation process at the operating temperatures ra：ng!ng from 500 ℃to 520 ℃.Finally, the cooling power provided by internal reforming of methane in SOFC fuel channel is calculated for two concepts to increase the methane content of the diesel reformate. The results show that the first concept, operating the diesel reformer at low O/C ratio and/or, recirculation rat!o, is not realizable due to high probability of coke formation, whereas the second concept, combining a methanation process with CPOX, can provide a significant cool- ing effect in addition to the conventional c？oling concept which needs higher levels of excess air.
文摘Pain and local complications are the major determinants of outcome after inguinal hernia repair. To evaluate the respective impact of peri-operative cooling of surgical site and usual care after open inguinal hernia repair, we performed a prospective randomized study. Methods: One hundred and eight consecutive patients with primary unilateral inguinal hernia were included the study. Repair was performed by local direct access during ambulatory surgery. The first study group underwent standard pre- and postoperative local care (control group). In the second group (cold compress group), a single-use disposable sterile cold compress was applied on the surgical site for at least 30 minutes before and 2 hours after surgery. Primary endpoints were immediate postoperative pain using a visual analogue scale, and local complications. Secondary endpoints included: analgesic drug consumption, length of hospital stay, delay to return to normal activity and patient satisfaction. Results: There was no difference concerning operative time (36.3 ± 14.0 vs 39.6 ± 7.2 minutes) and early (one-week) complications, although there was a non significant reduced incidence of hematoma and ecchymosis (0/54 versus 4/54) for the cold compress group. Analgesic drug consumption was significantly (p = 0.01) reduced. During the day of surgery and the first postoperative day, the visual analogue scale was significantly lower after cooling. There was a non-significant reduction in length of hospital stay (150 ± 37 versus 210 ± 47 min), and time to return to normal activity was shorter in the cold compress group. Conclusion: For open inguinal hernia repair, immediate pre- and post operative surgical site cooling, targeting a controlled temperature between 12?C and 15?C significantly reduced postoperative pain, analgesic drug consumption and resulted in improved immediate outcomes. This technique is safe, simple, easy to use, inexpensive and well tolerated by the patient.
文摘The reformation of (Bi,Pb)-2223 from the liquid or melt is very important for a melting process of (Bi,Pb)-2223 tape. By combination of quenching experiment with X-ray diffraction (XRD) analysis, the effect of cooling rate on the evolution of three superconducting phases in the (Bi,Pb)-2223 core of Ag-sheathed tape was investigated. The results show that (Bi,Pb)-2223 reformation from the melt seems to experience different routes during slowly cooling at different rates. One is that (Bi,Pb)-2223 phase reformed directly from the melt, and no Bi-2212 participate in this process. The other is that (Bi,Pb)-2223 is converted from the intermediate product, Bi-2212, which formed from the melt during the first cooling stage. Due to the inherent sluggish formation kinetics of (Bi,Pb)-2223 from Bi-2212, only partial (Bi,Pb)-2223 can finally be reformed with the second route.
