Managing economic and social profit of cooperative models in three-echelon reverse supply chain for waste electrical and electronic equipment

In addition to maximizing economic benefits, reverse supply chains should further seek to maximize social benefits by increasing the quantity of waste electrical and electronic equipment （WEEE）. The paper investigates cooperative models with different parties in a three-echelon reverse supply chain for WEEE consisting of a single collector, a single remanufacturer, and two retailers based on complete information. In acldition, the optimal decisions of four cooperative models and the effect of the market demand of remanufactured WEEE products and the market share of two retailers on the optimal decisions are discussed. The results indicate that optimal total channel profit and recycle quantity in a reverse supply chain are maximized in a centralized model. The optimal total channel profit and recycle quantity increase with an increase in the market demand of remanufactured WEEE products. The three-echelon reverse supply chain consisting of duopolistic retailers maximizes total channel profit and recycle quantity in a reverse supply chain fbr WEEE.

Comparison of the Three Cooperative Types of Agricultural Technology Popularization Based on the Industrialization of Tomato Industry in Xinjiang Autonomous Region

In the process of industrialization of tomato industry in Xinjiang, the cooperative models of rural households and tomato processing enterprises are order type, mediated type and workshop type. The contents, closeness degree and stability of cooperation of them are different. Under different cooperation models, the closeness degree of pillar industry and rural households differs, as well as the speed and effect of the technology promotion. By comparing the situation of technology promotion under the three cooperative models, the results can be obtained. The workshop type can reduce the risks of adopting new technologies of farmers greatly; strengthen the internal motivation of farmers to adopt new technology, so it can attract more farmers. Therefore, the workshop type represents the developmental direction of industrialization of tomato industry in Xinjiang to a certain extent.

New partial cooperation model for bilevel programming problems

Partial cooperation models are studied for many years to solve the bilevel programming problems where the follower’s optimal reaction is not unique. However, in these existed models, the follower’s cooperation level does not depend on the leader’s decision. A new model is proposed to solve this deficiency. It is proved the feasibility of the new model when the reaction set of the lower level is lower semicontinuous. And the numerical results show that the new model has optimal solutions when the reaction set of the lower level is discrete, lower semi-continuous and non-lower semi-continuous.

A new cooperative approach for ST-elevation myocardial infarction patients to receive timely and effective percutaneous coronary reperfusion in China

Background Acute myocardial infarction （AMI） is the most serious type of coronary heart disease. However, less than 30% of these patients have been treated effectively in China. Delayed treatment is a leading cause. This study aimed to evaluate a new regional cooperative model for improving the first medical contact-to-device time and the therapeutic effects on AMI patients. Methods A retrospective analysis of 458 ST-elevation myocardial infarction （STEMI） patients was performed. Patients were divided into two groups in terms of before or after the model were implemented. First medical contact-to-device time （FMC2D）, Door to device time （D2D）, referral time, cardiac functions, mean cost, days of hospitalization, and major adverse cardiac events （MACE） were analyzed. Results The mean FMC2D time, D2D time and referral time of the model group were significantly lower than the control group. The left ventricular ejection fraction of the model group increased but the left ventricular end-diastolic dimension decreased compared with the control group at 6 months after discharge. These re- sults also showed that mean costs and days of hospitalization were reduced. The MACE rate was reduced in the model group. Conclusions These results suggested that the new model decreased the FMC2D time, which could improve the cardiac function and therapeutic effect of STEMI patients as well as decreased the financial burden.

Cooperative Optimization of Reconfigurable Machine Tool Configurations and Production Process Plan

The production process plan design and configurations of reconfigurable machine tool （RMT） interact with each other. Reasonable process plans with suitable configurations of RMT help to improve product quality and reduce production cost. Therefore, a cooperative strategy is needed to concurrently solve the above issue. In this paper, the cooperative optimization model for RMT configurations and production process plan is presented. Its objectives take into account both impacts of process and configuration. Moreover, a novel genetic algorithm is also developed to provide optimal or near-optimal solutions： firstly, its chromosome is redesigned which is composed of three parts, operations, process plan and configurations of RMTs, respectively; secondly, its new selection, crossover and mutation operators are also developed to deal with the process constraints from operation processes （OP） graph, otherwise these operators could generate illegal solutions violating the limits; eventually the optimal configurations for RMT under optimal process plan design can be obtained. At last, a manufacturing line case is applied which is composed of three RMTs. It is shown from the case that the optimal process plan and configurations of RMT are concurrently obtained, and the production cost decreases 6.28% and nonmonetary performance increases 22%. The proposed method can figure out both RMT configurations and production process, improve production capacity, functions and equipment utilization for RMT.

An Exploratory Analysis of Cooperation Model Change in the Process of Tomato Industrialization in Xinjiang,China

The cooperation models appeared in the process of tomato industrialization in Xinjiang include orders,intermediary agencies and workshops.The cooperation content,the closeness and the cooperation stability of these models are different from each other.From the local to the Corps in Xinjiang,the cooperation model has undergone corresponding changes.The internal interest mechanism,the constriant mechanism and the protection mechanism have also undergone some changes.In order to make a breakthrough in tomato industrialization in Xinjiang,the cooperation model should be changed from the loose and semi-compact type to the high-compact type.The interest mechanism,the constriant mechanism and the protection mechanism between farmers and companies will be strengthened.

Power allocation and mode selection methods for cooperative communication in the rectangular tunnel

For the multipath fading on electromagnetic waves of wireless communication in the confined areas,the rectangular tunnel cooperative communication system was established based on the multimode channel model and the channel capacity formula derivation was obtained.On the optimal criterion of the channel capacity,the power allocation methods of both amplifying and forwarding(AF) and decoding and forwarding(DF) cooperative communication systems were proposed in the limitation of the total power to maximize the channel capacity.The mode selection methods of single input single output(SISO) and single input multiple output(SIMO) models in the rectangular tunnel,through which the higher channel capacity can be obtained,were put forward as well.The theoretical analysis and simulation comparison show that,channel capacity of the wireless communication system in the rectangular tunnel can be effectively enhanced through the cooperative technology;channel capacity of the rectangular tunnel under complicated conditions is maximized through the proposed power allocation methods,and the optimal cooperative mode of the channel capacity can be chosen according to the cooperative mode selection methods given in the paper.

The Integration of Cooperation Model and Genetic Algorithm

In the photogrammetry,some researchers have applied genetic algorithms in aerial image texture classification and reducing hyper_spectrum remote sensing data.Genetic algorithm can rapidly find the solutions which are close to the optimal solution.But it is not easy to find the optimal solution.In order to solve the problem,a cooperative evolution idea integrating genetic algorithm and ant colony algorithm is presented in this paper.On the basis of the advantages of ant colony algorithm,this paper proposes the method integrating genetic algorithms and ant colony algorithm to overcome the drawback of genetic algorithms.Moreover,the paper takes designing texture classification masks of aerial images as an example to illustrate the integration theory and procedures.

Global asymptotic stability of positive equilibrium in a 3-species cooperating model with time delay

The asymptotic behavior of the time-dependent solution for a 3-species cooperating model was investigated with the effects of both diffusion and time delay taken into consideration. We proved the global asymptotic stability of a positive steady-state solution to the model problem by using coupled upper and lower solutions for a more general reaction-diffusion system that gives a common framework for 3-species cooperating model problems. The result of global asymptotic stability implies that the model system coexistence is permanent. Some global asymptotic stability results for 2-species cooperating reaction-diffusion systems are included in the discussion, and some known results are extended.

COSCO Shipping Acquisition as A Success Model for Greece-China Cooperation

On July 4th,2016,China COSCO Shipping Corporation Limited('COSCO SHIPPING'or'the Group')and the Hellenic Republic Asset Development Fund(HRADF)signed a letter in Beijing,confirming that the conditions defined in the previously signed Share Purchase Agreement(SPA)have been fulfilled.It marks a decisive achievement for COSCO SHIPPING’S

A collaborative approach to integrated energy systems that consider direct trading of multiple energy derivatives

The cooperative model of a multi-subject Regional Integrated Energy System(RIES)is no longer limited to the trading of traditional energy,but the trading of new energy derivatives such as Green Certificates(GC),Service Power(SP),and CO_(2) will be more involved in the energy allocation of the cooperative model.This study was conducted for the multi-entity RIES cooperative model considering the trading of electronics,GC,SP,and CO_(2).First,a cooperative framework including wind-photovoltaic generation system(WG),combined heat and power system(CHP),and power-carbon-hydrogen load(PCH)is proposed,and the mechanism of energy derivatives trading is also analyzed.Then,the sub-models of each agent in the cooperative model are established separately so that WG has the capability of GC generation,CHP has the capability of GC and CO_(2) absorption,and PCH can realize the effective utilization of CO_(2).Then,the WG–CHP–PCH cooperative model is established and equated into two sub-problems of cooperative benefit maximization and transaction payment negotiation,which are solved in a distributed manner by the alternating directed multiplier method(ADMM).Finally,the effectiveness of the proposed cooperative model and distributed solution is verified by simulation.The simulation results show that the WG–CHP–PCH cooperative model can substantially improve the operational efficiency of each agent and realize the efficient redistribution of energy and its derivatives.In addition,the dynamic parameter adjustment algorithm(DP)is further applied in the solving process to improve its convergence speed.By updating the step size during each iteration,the computational cost,the number of iterations,and the apparent oscillations are reduced,and the convergence performance of the algorithm is improved.

Stability and bifurcation analysis of a size-stage-structured cooperation model

In this paper,we propose a size-stage-structured cooperation model which has two distinct life stages in facultative cooperator.The primary feature of this model is to consider size structure,stage structure and obligate and facultative symbiosis at the same time in a cooperation system.We use the method of characteristic to show that this new model can be reduced to a threshold delay equations(TDEs)model,which can be further transformed into a functional differential equations(FDEs)model by a simple change of variables.Such simplification allows us to apply the classical theory of FDEs and establish a set of sufficient conditions to investigate the qualitative analysis of solutions of the FDEs model,including the global existence and uniqueness,positivity and boundedness.What's more,we use the geometric criteria to get the conclusions about stability and Hopf bifurcation of positive equilibrium because the coefficients of the characteristic equation depend on the bifurcation parameter.Finally,numerical simulations are carried out as supporting evidences of our analytical results.Our results show that the presence of size structure and stage structure plays an important role in the dynamic behavior of the model.

Coordination of Urbanization and Water Ecological Environment in Shayinghe River Basin,China

During the rapid industrialization and urbanization of China,urban agglomeration in river basin areas raises the problems of over-use of water resources and pollution of the water environment.Related research in China has mainly focused on the conflicts among economic growth,urban expansion and water resource shortages within admin-istrative boundaries.However,water environments are much more dependent on their physical boundaries than their administrative boundaries.Consistent with the nature of water environment,this study aims at analyzing coordination relationships between urban development and water environment changes within physical river basin boundaries.We chose the Shayinghe River Basin,China,as our case study area which is facing serious challenges related to water en-vironment protection.Then we classified 35 county-level administrative units into upstream,midstream and down-stream regions based on their physical characteristics;analyzed the coordination degree of urban agglomeration using the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) method;and constructed cooperative models using the Linear Programming (LP function) to simulate four scenarios of the coordination relationship be-tween urban population increase and water environment protection based on existing water resources and water pollu-tion data.The results show that the present coordinative situation in Shayinghe River Basin is not sustainable.In gen-eral,more than 50% administrative units are in the bad coordinative situation.In particular,the downstream region is under worse condition than the upstream and midstream regions.Cooperative models in scenario analyses indicate that the population scale set in existing urban master plannings is not coordinated with the water environment protection.To reach the goal of regional sustainable development,the total population needs to be controlled such that it will re-main at 4.5×10 7 or below by 2020 given the capacity of water environment.

Price Transmission in China's Swine Industry with an Application of MCM

The paper studies the relationship, adjustment ability, path, efficiency and intensity of price transmission in the swine industry chain in China, which consists of the prices of corn, compound feed for fattening pig, piglet, pig and pork. Monthly prices covering a period of 18 yr （1994-2011） are analyzed using a Market-Chain Cooperated Model （MCM）. The empirical results show that there exists a stable long-term cointegration and short-term dynamic relationship in the price system. First, the adjustment speed of each price series is very slow and the transmission path is top-down and one-way significantly. Second, the price from upstream to downstream lags about 2 mort, while there is no lag in price transmission from midstream to downstream. Third, in terms of price transmission intensity, the price of pig impacted greatly on pork price, not only in the current period but also through the whole period. Besides, the price of corn has the largest lagged effects on pork price. According to the above empirical results, we suggest that government should strengthen monitoring and early warning of the swine industry chain, especially the upstream and midstream, attach great importance to the timely adjustment of feed prices and perfect the measures of price subsidy.

Game theory approach to optimal capital cost allocation in pollution control

This paper tries to integrate game theory, a very useful tool to resolve conflict phenomena, with optimal capital cost allocation issue in total emission control. First the necessity of allocating optimal capital costs fairly and reasonably among polluters in total emission control was analyzed. Then the possibility of applying game theory to the issue of the optimal capital cost allocation was expounded. Next the cooperative N person game model of the optimal capital cost allocation and its solution ways including method based on Shapley value, least core method, weak least core methods, proportional least core method, CGA method, MCRS method and so on were delineated. Finally through application of these methods it was concluded that to apply game theory in the optimal capital cost allocation issue is helpful to implement the total emission control planning schemes successfully, to control pollution effectively, and to ensure sustainable development.

软件工程四位一体校企合作实践教学体系研究(英文)

To meet for the enterprise requirements of software engineers and to solve the problems that the software engineers with low capacity in engineering and innovation issues at present,this paper first analyzes the software engineering education objectives and methods,then proposes to build an engineering teaching architecture which called One Frame with Four Aspects.This architecture reforms the practical teaching experience from educational concepts,practical training links,practical training objectives as well as practical training evaluation mechanism,especially focuses on the content of practice teaching,engineering teaching curriculum,the school-enterprise cooperation model and evaluation mechanisms.Practice has shown that the practical teaching system can be applied to software training well in Software School and its training effect is remarkable.

Teaching Reform and Practice of Augmented Reality Course at Xiamen University

Augmented Reality(AR)is a new mode of interactive media that is becoming increasingly popular.Few universities,however,offer courses specifically in AR.This raises questions on appropriate teaching paradigms for this fast-developing area.This paper,therefore,discusses current challenges for teaching AR including a shortage of teaching staff,segmented teaching materials,and theory-driven assessment methods.As such,we present several strategies currently used in the AR technology and application course at Xiamen University.To improve teaching performance,we introduced part-time tutors who are currently employed within the AR industry.Furthermore,we improved the systematic presentation of our course materials to allow an integrative understanding of them.Students developed AR projects using Huawei,the most popular mobile platform in China.This paper concludes that students who underwent this teaching paradigm developed effective skills and knowledge in AR and successfully advanced their careers.

On the impact of connected automated vehicles in freeway work zones:a cooperative cellular automata model based approach

Purpose–Freeway work zones have been traffic bottlenecks that lead to a series of problems,including long travel time,high-speed variation,driver’s dissatisfaction and traffic congestion.This research aims to develop a collaborative component of connected and automated vehicles(CAVs)to alleviate negative effects caused by work zones.Design/methodology/approach–The proposed cooperative component is incorporated in a cellular automata model to examine how and to what scale CAVs can help in improving traffic operations.Findings–Simulation results show that,with the proposed component and penetration of CAVs,the average performances(travel time,safety and emission)can all be improved and the stochasticity of performances will be minimized too.Originality/value–To the best of the authors’knowledge,this is the first research that develops a cooperative mechanism of CAVs to improve work zone performance.

Bifurcation control of a fractional-order delayed competition and cooperation model of two enterprises

The competition and cooperation among enterprises has become a hot topic and focus issue in today’s world. How to manage the enterprise well so as to achieve the maximum output is an important problem for enterprise managers. Optimizing output of two enterprises plays a key role in operating enterprises. Many scholars pay much attention to this aspect. However, the reports on the stability and Hopf bifurcation for fractional-order delayed competition and cooperation model of two enterprises are very few. This paper is concerned with the stability, the existence of Hopf bifurcation and the bifurcation control issue of fractionalorder delayed competition and cooperation model of two enterprises. Firstly, some new sufficient conditions that guarantee the stability and the existence of Hopf bifurcation for fractional-order delayed competition and cooperation model of two enterprises are obtained by regarding the delay as bifurcation parameter. Then a suitable time delayed feedback controller is designed to control the Hopf bifurcation for involved model. The study shows that the delay and the fractional order have an important effect on the stability and Hopf bifurcation of involved model. Some simulations justifying the validity of the derived analytical results are given. At last, we end this paper with a concise conclusion. The obtained results of this article are innovative and are of great significance in handling the competition and cooperation among enterprises.