Thin-slab continuous casting and rolling technology is a process integrating casting and plastic deformation. In this study,targeting actions such as slab deformation and liquid core flows during the process of liquid...Thin-slab continuous casting and rolling technology is a process integrating casting and plastic deformation. In this study,targeting actions such as slab deformation and liquid core flows during the process of liquid core reduction on thin-slab continuous casting, suggests the fluid-solid coupling method should be used to research the characteristic and patterns of slab deformation during the liquid core reduction process, as well as research liquid core backflows. A material model of the slab shell was obtained through the high-temperature compression test of the cast steel. The analysis of the fluid-solid coupling simulation for liquid core reduction shows that slab deformation concentrates on the narrow side due to the existence of the liquid core. Meanwhile,the stress and strain increases with the increase of the reduction rate and slab thickness. The changing trends of stress and strain are identical under various conditions. The results demonstrate that using greater reduction at the upper part of the slab, which has a higher temperature and thinner slab,is beneficial to the quality of the slab. Moreover,the liquid core is extruded as the reduction is implemented. The quantity of the extrusion increases with the increase of reduction rate and the thickness of thinner shell, which leads to fluctuation of the mould level, making the operation more difficult.展开更多
A two-dimensional model was applied to simulate the liquid core reduction (LCR) technology of bloom CC using ANSYS software. The deformation characteristics of bloom under different liquid fraction and reducing amount...A two-dimensional model was applied to simulate the liquid core reduction (LCR) technology of bloom CC using ANSYS software. The deformation characteristics of bloom under different liquid fraction and reducing amount are obtained. The results indicate that the main deformation condition of bloom shell is compressive strain, mainly undertaken by the liquid core, which increases with the enhancement of reducing amount. Solidified shell takes minor deformation. The longitudinal section of bloom appears sunken and the narrow side bulges, which grow serious when the liquid fraction increases.展开更多
文摘Thin-slab continuous casting and rolling technology is a process integrating casting and plastic deformation. In this study,targeting actions such as slab deformation and liquid core flows during the process of liquid core reduction on thin-slab continuous casting, suggests the fluid-solid coupling method should be used to research the characteristic and patterns of slab deformation during the liquid core reduction process, as well as research liquid core backflows. A material model of the slab shell was obtained through the high-temperature compression test of the cast steel. The analysis of the fluid-solid coupling simulation for liquid core reduction shows that slab deformation concentrates on the narrow side due to the existence of the liquid core. Meanwhile,the stress and strain increases with the increase of the reduction rate and slab thickness. The changing trends of stress and strain are identical under various conditions. The results demonstrate that using greater reduction at the upper part of the slab, which has a higher temperature and thinner slab,is beneficial to the quality of the slab. Moreover,the liquid core is extruded as the reduction is implemented. The quantity of the extrusion increases with the increase of reduction rate and the thickness of thinner shell, which leads to fluctuation of the mould level, making the operation more difficult.
文摘A two-dimensional model was applied to simulate the liquid core reduction (LCR) technology of bloom CC using ANSYS software. The deformation characteristics of bloom under different liquid fraction and reducing amount are obtained. The results indicate that the main deformation condition of bloom shell is compressive strain, mainly undertaken by the liquid core, which increases with the enhancement of reducing amount. Solidified shell takes minor deformation. The longitudinal section of bloom appears sunken and the narrow side bulges, which grow serious when the liquid fraction increases.
