Gradient cemented carbides with nano-TiN were prepared by the common powder metallurgical procedure. The formation of gradient zone and the microstructure, properties of the alloys were investigated using scanning ele...Gradient cemented carbides with nano-TiN were prepared by the common powder metallurgical procedure. The formation of gradient zone and the microstructure, properties of the alloys were investigated using scanning electron microscope（SEM）, energy dispersive spectroscopy（EDS） and other performance testing apparatus. Moreover, the effect of nano-TiN on the gradient cemented carbide was studied. It is found that gradient zone width increases slightly with nano-TiN introduction. Both cobalt and titanium concentrations reach the maximum near the gradient border. Tungsten concentration shows fluctuation from the surface to the bulk. （Ti ,W）C phase grains are refined for nitrogen introduction. Core-rim structure has been observed under the SEM back-scattered mode. The core appears as dark due to more titanium in it and the rim with more tungsten appears as grey. In addition, the hardness and transverse rupture strength of gradient cemented carbide are enhanced with nano-TiN introduced.展开更多
Phase relation and microstructure evolution in the pressure-less sintered TiB_(2)‒TiC ceramics preceded with mechanical alloying were systematically studied by a combination of SEM analysis.WC debris from milling ball...Phase relation and microstructure evolution in the pressure-less sintered TiB_(2)‒TiC ceramics preceded with mechanical alloying were systematically studied by a combination of SEM analysis.WC debris from milling balls promotes sintering by dissolving into the TiC phase to achieve dense microstructures at 1600℃.Variation of W solution in TiC grains exposes two types of core-rim structures,with no or more W in dark and white cores respectively but with common medium W in both rims.Diminishing whitecores reveal an exchange reaction between WC and TiC via mechanical alloying to form the Ti_(1-z)W_(z)C phase prior to sintering.The dark-cores inherit from the as-milled TiC power to further enable the reprecipitation of rims from a mixed liquid-phase,which facilitated also the anisotropic growth of TiB_(2) grains.The dark-cores grow persistently in the second-step at 2000℃ enabled by this liquid-phase,which coarsens the TiB2 grains too.With more alloyed phase,sintering was insufficient at 1500℃ with only the surface fluidity from the primary powders,and the second-step sintering increased the fluidity in the liquid-phase to fully densify the binary microstructure.Re-distribution of the alloyed W by two-step sintering rationalizes the evolution process of the binary microstructures and leads to better understanding of the mechanical behaviors.展开更多
基金Project (51474108) supported by the National Natural Science Foundation of ChinaProject (208081725043) supported by the Natural Science Foundation of Guangdong Province,ChinaProject (1203) supported by the Innovation-driven Development Science and Technology Project of Economic Development District of Yichun,China。
基金Funded by Research Funds for the Central Universities(No.2011SCU11038)Chengdu Science and Technology Project(Nos.10GGZD080GX-268 and 11DXYB096JH-027)
文摘Gradient cemented carbides with nano-TiN were prepared by the common powder metallurgical procedure. The formation of gradient zone and the microstructure, properties of the alloys were investigated using scanning electron microscope（SEM）, energy dispersive spectroscopy（EDS） and other performance testing apparatus. Moreover, the effect of nano-TiN on the gradient cemented carbide was studied. It is found that gradient zone width increases slightly with nano-TiN introduction. Both cobalt and titanium concentrations reach the maximum near the gradient border. Tungsten concentration shows fluctuation from the surface to the bulk. （Ti ,W）C phase grains are refined for nitrogen introduction. Core-rim structure has been observed under the SEM back-scattered mode. The core appears as dark due to more titanium in it and the rim with more tungsten appears as grey. In addition, the hardness and transverse rupture strength of gradient cemented carbide are enhanced with nano-TiN introduced.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51532006 and 51472060)Science and Technology Commission of Shanghai Municipality(16DZ2260601)the 111 Project(D16002)of the National Foreign Experts Bureau of China.
文摘Phase relation and microstructure evolution in the pressure-less sintered TiB_(2)‒TiC ceramics preceded with mechanical alloying were systematically studied by a combination of SEM analysis.WC debris from milling balls promotes sintering by dissolving into the TiC phase to achieve dense microstructures at 1600℃.Variation of W solution in TiC grains exposes two types of core-rim structures,with no or more W in dark and white cores respectively but with common medium W in both rims.Diminishing whitecores reveal an exchange reaction between WC and TiC via mechanical alloying to form the Ti_(1-z)W_(z)C phase prior to sintering.The dark-cores inherit from the as-milled TiC power to further enable the reprecipitation of rims from a mixed liquid-phase,which facilitated also the anisotropic growth of TiB_(2) grains.The dark-cores grow persistently in the second-step at 2000℃ enabled by this liquid-phase,which coarsens the TiB2 grains too.With more alloyed phase,sintering was insufficient at 1500℃ with only the surface fluidity from the primary powders,and the second-step sintering increased the fluidity in the liquid-phase to fully densify the binary microstructure.Re-distribution of the alloyed W by two-step sintering rationalizes the evolution process of the binary microstructures and leads to better understanding of the mechanical behaviors.
基金National Natural Science Foundation of China(51634006,51901195)Science and Technology Major Project of Sichuan Province(2020ZDZX0022)+2 种基金SCU-Pan Zhi Hua Project(2018CDPZH-25)SCU-Zi Gong Project(2019CDZG-1)National Science and Technology Major Project of China(2019ZX04007001)。
