Xinjiang is known as the oasis irrigation agricultural area, characterized by plenty of sunshine favorable for cotton growth. However, the oases, dotted in the gobi deserts, are distributed at the foot of the enclosed...Xinjiang is known as the oasis irrigation agricultural area, characterized by plenty of sunshine favorable for cotton growth. However, the oases, dotted in the gobi deserts, are distributed at the foot of the enclosed mountains and a steppe in the centre of the Turpan Basin, and thus has a rathe vulnerable eco-environment. Since the 1980s, the cotton-growing industry has developed very quickly. The area of cotton-growing belt has increased from 181,000 hectares in 1980 to 866,600 hectares in 1997, which accounted for 34.7% of the total cultivated area in Xinjiang. The cotton output has correspondingly increased from 79,200 tons to 1.05 million tons and per hectare output has also increased from 438 kg to 1211 kg[1]. In recent decades, changes have taken place in agricultural products, such as the ratio of cotton and grain, total output and per hectare output with the expansion of cotton-growing belt. Before 1982, per hectare cotton output remained below 450 kg. Since 1982, thanks to the adoption of plastic film technique and such a planation mode as 'short, dense and early', namely, to select short-stalked, close planting and early maturing varieties, the per hectare cotton output has undergone a steady increase. After 1984, per hectare output reached more than 900 kg, and since 1995 it has reached 1435 kg per hectare, 9 folds more than that in the 1950s[1,2]. However the harmful organisms have accompanied the repaid expansion of the cotton-growing belt and the degree of deterioration has also kept increasing. Harmful organisms present a bottleneck for the further development of cotton production. To effectively control and protect against harmful organisms is the key to guaranteeing the steady development of Xinjiang cotton industry.展开更多
This article investigates the movement trajectory of the cotton particle from Point D of belt transporter of the saw gin camera to Point B of the saw cylinder. In other words, the forces acting on the cotton particle ...This article investigates the movement trajectory of the cotton particle from Point D of belt transporter of the saw gin camera to Point B of the saw cylinder. In other words, the forces acting on the cotton particle and the equations of their interactions are developed, where, the differential equation of the law of movement of the cotton particle “belt + saw” is made according to the d’Alembert principle. Arc-BD of cotton particle gives the length of the arc of their fall on the saw teeth. The maximum separation of fibers and the quality of separation of fiber from seeds, as well as the time (t) of rapid separation of fiber from seeds, depend on the length of the arc-BD, because the critical length of the arc-BD makes it possible to reduce the multi-layering of the falling cotton particle on the saw teeth. In this scientific research work, patented by the new working camera of the saw gin, the trajectories of the movement of the cotton particles along the arc-DB, as well as the trajectory of the move in the direction of the grate are studied. The results of the study show that the number of fibers increases along the height of the teeth of the saw with one touch. This leads to a decrease in the average stay of seeds in the working chamber of the gin. As a result, the efficiency of the saw gin is increased.展开更多
This article studied the principles of movements in the horizontal part of the newly constructed ginning camera, which is created by the authors, of the cotton particles. During the movement, the cotton particles get ...This article studied the principles of movements in the horizontal part of the newly constructed ginning camera, which is created by the authors, of the cotton particles. During the movement, the cotton particles get affected by pressing to various surface and forceful turbulent and horizontal movements of the surface. Some foreign mixtures and additional unnecessary objects get separated by the turbulence of the various surfaces and movement of the paneled stripes. Ginning efficiency and the quality of the cotton will be improved as the defects of the cotton particles are removed. “Cotton particle + net surface” movement principle of the Cartesian coordinate system was examined based on the rows of Cartesian coordinate system, by dividing all sides of the system by m weight and has the following second ordered multiple gender differential formula.展开更多
基金Supported by Light of Western Regions Project and Key Project of CAS Integrated Demonstration Project for Sustainable Developmen
文摘Xinjiang is known as the oasis irrigation agricultural area, characterized by plenty of sunshine favorable for cotton growth. However, the oases, dotted in the gobi deserts, are distributed at the foot of the enclosed mountains and a steppe in the centre of the Turpan Basin, and thus has a rathe vulnerable eco-environment. Since the 1980s, the cotton-growing industry has developed very quickly. The area of cotton-growing belt has increased from 181,000 hectares in 1980 to 866,600 hectares in 1997, which accounted for 34.7% of the total cultivated area in Xinjiang. The cotton output has correspondingly increased from 79,200 tons to 1.05 million tons and per hectare output has also increased from 438 kg to 1211 kg[1]. In recent decades, changes have taken place in agricultural products, such as the ratio of cotton and grain, total output and per hectare output with the expansion of cotton-growing belt. Before 1982, per hectare cotton output remained below 450 kg. Since 1982, thanks to the adoption of plastic film technique and such a planation mode as 'short, dense and early', namely, to select short-stalked, close planting and early maturing varieties, the per hectare cotton output has undergone a steady increase. After 1984, per hectare output reached more than 900 kg, and since 1995 it has reached 1435 kg per hectare, 9 folds more than that in the 1950s[1,2]. However the harmful organisms have accompanied the repaid expansion of the cotton-growing belt and the degree of deterioration has also kept increasing. Harmful organisms present a bottleneck for the further development of cotton production. To effectively control and protect against harmful organisms is the key to guaranteeing the steady development of Xinjiang cotton industry.
文摘This article investigates the movement trajectory of the cotton particle from Point D of belt transporter of the saw gin camera to Point B of the saw cylinder. In other words, the forces acting on the cotton particle and the equations of their interactions are developed, where, the differential equation of the law of movement of the cotton particle “belt + saw” is made according to the d’Alembert principle. Arc-BD of cotton particle gives the length of the arc of their fall on the saw teeth. The maximum separation of fibers and the quality of separation of fiber from seeds, as well as the time (t) of rapid separation of fiber from seeds, depend on the length of the arc-BD, because the critical length of the arc-BD makes it possible to reduce the multi-layering of the falling cotton particle on the saw teeth. In this scientific research work, patented by the new working camera of the saw gin, the trajectories of the movement of the cotton particles along the arc-DB, as well as the trajectory of the move in the direction of the grate are studied. The results of the study show that the number of fibers increases along the height of the teeth of the saw with one touch. This leads to a decrease in the average stay of seeds in the working chamber of the gin. As a result, the efficiency of the saw gin is increased.
文摘This article studied the principles of movements in the horizontal part of the newly constructed ginning camera, which is created by the authors, of the cotton particles. During the movement, the cotton particles get affected by pressing to various surface and forceful turbulent and horizontal movements of the surface. Some foreign mixtures and additional unnecessary objects get separated by the turbulence of the various surfaces and movement of the paneled stripes. Ginning efficiency and the quality of the cotton will be improved as the defects of the cotton particles are removed. “Cotton particle + net surface” movement principle of the Cartesian coordinate system was examined based on the rows of Cartesian coordinate system, by dividing all sides of the system by m weight and has the following second ordered multiple gender differential formula.
