The underwater counter-rotation propeller non-cavitation noise has an obvious mod- ulation characteristic which is due to the interaction of flow and blade. A modulation mecha- nism is presented in this paper. A sound...The underwater counter-rotation propeller non-cavitation noise has an obvious mod- ulation characteristic which is due to the interaction of flow and blade. A modulation mecha- nism is presented in this paper. A sound pressure spectrum model is presented to describe its non-cavitation noise with application of generalized acoustic analogy method, the modulation mechanism is expressed with the improvement of sound pressure model. The power spectrum and modulation spectrum are presented by numerical simulation. Theoretical analysis and nu- merical simulation results are verified by the cavitation tunnel experiment. The modulation model of counter-rotation propeller is beneficial to the prediction modulation characteristics and identification of underwater high-speed vehicles.展开更多
Line-Spectrum noise of counter-rotation propellers has constructed the main part of the radiated noise of high speed vehicles in water. The line-spectrum noise of the counter-rotation propellers is due to the interact...Line-Spectrum noise of counter-rotation propellers has constructed the main part of the radiated noise of high speed vehicles in water. The line-spectrum noise of the counter-rotation propellers is due to the interaction between fore or aft propeller and wake of the vehicle,and the interaction between fore and aft propeller. Based on a combination of the lifting surface theory and acoustic method, the prediction of line-spectrum noise is presented in this paper.Theoretical calculation method, characteristics and numerical prediction of the line-spectrum noise are detailed too. The effect of different wake and different distance between fore and aft propeller on the propeller noise is also studied by numerical method. The agreement of predicted results compared with existing experimental data is quite satisfactory.展开更多
Ocean energy has a potential of providing a large amount of renewable energy around the world. One of the forms of ocean energy, tidal stream power is widely recognized as the continuous, predictable and eco-friendly ...Ocean energy has a potential of providing a large amount of renewable energy around the world. One of the forms of ocean energy, tidal stream power is widely recognized as the continuous, predictable and eco-friendly ocean energy source. Unique tandem propellers that can counter-rotate have been designed to generate electric power effectively from a tidal stream. This type of power unit has several advantages compare to the conventional unit with a single propeller. At the design of the tidal stream power unit, it is important to investigate the structure of the tip vortex tubes shedding to predict the load of the propeller. In this research, we investigated the tip vortex shedding using the CFD method for the conventional single propeller and counter-rotating type tandem propellers and estimated the performance efficiency using RANS (Reynolds Averaged Navier-Stokes) model and we confirmed the limitation of RANS model on the calculation of the tip vortex stretching.展开更多
Traditional type pumped storage system contributes to adjust the electric power unbalance between day and night, in general. The pump-turbine unit is prepared for the power stabilization system, in this serial researc...Traditional type pumped storage system contributes to adjust the electric power unbalance between day and night, in general. The pump-turbine unit is prepared for the power stabilization system, in this serial research, to provide the constant power with good quality for the grid system, even at the suddenly fluctuating/turbulent output from renewable energies. In the unit, the angular momentum changes through the front impeller/runner must be the same as that through the rear impeller/runner, that is, the axial flow at the outlet should be the same to the axial flow at the inlet. Such flow conditions are advantageous to work at not only the pumping mode but also the turbine mode. This work discusses experimentally the performance of the unit, and verifies that this type unit is very effective to both operating modes.展开更多
Electrochemical machining (ECM) has been widely used in the aerospace, automotive, defense and medical industries for its many advantages over traditional machining methods. However, the machining accuracy in ECM is...Electrochemical machining (ECM) has been widely used in the aerospace, automotive, defense and medical industries for its many advantages over traditional machining methods. However, the machining accuracy in ECM is to a great extent limited by the stray corrosion of the unwanted material removal. Many attempts have been made to improve the ECM accuracy, such as the use of a pulse power, passivating electrolytes and auxiliary electrodes. However, they are sometimes insufficient for the reduction of the stray removal and have their limitations in many cases. To solve the stray corrosion problem in CRECM, insulating and conductive coatings are respectively used. The different implement processes of the two kinds of coatings are introduced. The effects of the two kinds of shielding coatings on the anode shaping process are investigated. Numerical simulations and experiments are conducted for the comparison of the two coatings. The simulation and experimental results show that both the two kinds of coatings are valid for the reduction of stray corrosion on the top surface of the convex structure. However, for insulating coating, the convex sidewall becomes concave when the height of the convex structure is over 1.26 ram. In addition, it is easy to peel off by the high-speed electrolyte. In contrast, the conductive coating has a strong adhesion, and can be well reserved during the whole machining process. The convex structure fabricated by using a conductive iron coating layer presents a favorable sidewall profile. It is concluded that the conductive coating is more effective for the improvement of the machining quality in CRECM. The proposed shielding coatings can also be employed to reduce the stray corrosion in other schemes of ECM.展开更多
With the increasing demand for the clean sustainable power, the turbine design urgently turns to increase the capability significantly toward higher head for generating larger power. Currently, there are many studies ...With the increasing demand for the clean sustainable power, the turbine design urgently turns to increase the capability significantly toward higher head for generating larger power. Currently, there are many studies in the field of the bulb turbine with single-stage runner, though reports about counter-rotating tandem-runner are rare. However, the further high-head application with the single-stage runner is very difficult to achieve due to the limit of the specific speed. In this paper, a new bulb turbine with the tandem-runner is designed in order to substantially increase the applicable limit toward higher head with larger power. A half of the net head is absorbed by the frontal runner which can generate output power, while the remaining half is absorbed by the rear runner. To generate the Euler energy required for the rear runner, the frontal runner has the counter-rotation against the rear runner so that the counter-rotating tandem-runner can meet the purpose of double head and power under the same size as the conventional bulb turbine. Supply and demand of Euler energy between the two runners are thoroughly optimized through the detailed flow analysis, in order to secure the stable operation. As a result, the interference of Euler energies between the outflow from the frontal runner and the inflow to the rear runner is confirmed to be very small on the counter-rotating interface between the two runners. The prediction method of on-cam performance between the two adjustable runners is also developed numerically, which provides optimal flow between the two runners. This research provides a theoretical basis for the optimal design and operation of the counter-rotating tandem-runner bulb turbines.展开更多
This paper studies the communication problem at the counter-rotating seam of the low-orbit satellite based on the walker constellation. The counter-rotating seam has a short life cycle, low capacity, and dynamic geome...This paper studies the communication problem at the counter-rotating seam of the low-orbit satellite based on the walker constellation. The counter-rotating seam has a short life cycle, low capacity, and dynamic geometric parameters. To better utilize the scarce link resources at the seam, increase network throughput, and approach the physical limits of the link throughput at the seam, an initial phase condition that maximizes the relative rotational joint link throughput is calculated. In the experimental simulation results using the Iridium system as an example, it is shown that better throughput can be obtained under the initial conditions, and the throughput is improved by about 30%.展开更多
Most of the schemes for generating isolated attosecond pulses(IAP) are sensitive to the carrier-envelope phase(CEP)of the driving lasers. We propose a scheme for generating IAP using two-color counter-rotating cir...Most of the schemes for generating isolated attosecond pulses(IAP) are sensitive to the carrier-envelope phase(CEP)of the driving lasers. We propose a scheme for generating IAP using two-color counter-rotating circularly polarized(TCCRCP) laser pulses. The results demonstrate that the dependence of the IAP generation on CEP stability is largely reduced in this scheme. IAP can be generated at most of CEPs. Therefore, the experiment requirements become lower.展开更多
We theoretically investigated the properties of the high-order harmonic generation from an argon atom by bichromatic counter-rotating circularly polarized(BCCP)laser field.The harmonic emission processes have been ill...We theoretically investigated the properties of the high-order harmonic generation from an argon atom by bichromatic counter-rotating circularly polarized(BCCP)laser field.The harmonic emission processes have been illustrated by numerically solving the two-dimensional time-dependent Schr¨odinger equation of an atom in intense laser fields.It is found that with the decrease of the right-circularly polarized laser wavelength,the harmonic spectra are gradually splitting and the harmonic orders move towards the higher frequency.Meanwhile,the integer and semi-integer harmonic emission will be generated when the frequency ratios of right-and left-circularly polarized lasers are semi-integer.The emission mechanism of the semi-integer-order harmonics has been investigated by using the rules of photon absorption and emission.展开更多
We theoretically investigate the effects of different electronic states as the initial state on the vortex patterns in photoelectron momentum distributions(PMDs)from numerical solutions of the two-dimensional(2D)time-...We theoretically investigate the effects of different electronic states as the initial state on the vortex patterns in photoelectron momentum distributions(PMDs)from numerical solutions of the two-dimensional(2D)time-dependent Schrodinger equation(TDSE)of He^(+)with a pair of counter-rotating circularly polarized attosecond pulses.It is found that the number of spiral arms in vortex patterns is equal to the number of the absorbed photons when the initial state is the ground state.However,the number of spiral arms in vortex patterns is always two more than the number of the absorbed photons when the initial state is the excited state.This sensitivity is attributed to the initial electron density distribution.In addition,we have demonstrated the PMDs for different initial electronic states with the same wavelengths and analyzed their corresponding physical mechanisms.It is illustrated that the method presented can be employed to effectively control the distribution of the electron vortices.展开更多
We investigate high-order harmonic generation from atoms irradiated by bichromatic counter-rotating circularly polarized laser pulses by numerically solving the time-dependent Schrödinger equation.It is found tha...We investigate high-order harmonic generation from atoms irradiated by bichromatic counter-rotating circularly polarized laser pulses by numerically solving the time-dependent Schrödinger equation.It is found that the minimum energy position of the harmonic spectrum and the non-integer order optical radiation are greatly discrepant for different atomic potentials.By analyzing the quantum trajectory of the harmonic emission,discrepancies among the harmonic spectra from different potentials can be attributed to the action of the potential on the ionized electrons.In addition,based on the influence of the driving light intensity on the overall intensity and ellipticity of higher order harmonics,the physical conditions for generating a high-intensity circularly polarized harmonic can be obtained.展开更多
Tidal stream power units with horizontal-axis propellers are one of promising technologies for generating the renewable green energy. The ebb and flow require that the power unit must operate in bidirectional tidal st...Tidal stream power units with horizontal-axis propellers are one of promising technologies for generating the renewable green energy. The ebb and flow require that the power unit must operate in bidirectional tidal streams. Hence a tidal stream power unit with counter-rotating type horizontal-axis bidirectional propellers is proposed in this paper. The blades with fully-symmetrical hydrofoils were optimized numerically. The output and flow conditions predicted by the computational fluid dynamics simulations are compared with the results of the wind tunnel experiments at the higher tip speed ratios, which are of expected usual operating conditions of this unit. The numerical and experimental results show good agreements. It is also confirmed that the flow discharged from the counter-rotating type propellers has no swirling component, though the single propeller generates the unacceptable swirling component.展开更多
Three-Dimensional(3D)swirling flow structures,generated by a counter-rotating dualstage swirler in a confined chamber with a confinement ratio of 1.53,were experimentally investigated at Re=2.3×10^(5)using Tomogr...Three-Dimensional(3D)swirling flow structures,generated by a counter-rotating dualstage swirler in a confined chamber with a confinement ratio of 1.53,were experimentally investigated at Re=2.3×10^(5)using Tomographic Particle Image Velocimetry(Tomo-PIV)and planar Particle Image Velocimetry(PIV).Based on the analysis of the 3D time-averaged swirling flow structures and 3D Proper Orthogonal Decomposition(POD)of the Tomo-PIV data,typical coherent flow structures,including the Corner Recirculation Zone(CRZ),Central Recirculation Zone(CTRZ),and Lip Recirculation Zone(LRZ),were extracted.The counter-rotating dual-stage swirler with a Venturi flare generates the independence process of vortex breakdown from the main stage and pilot stage,leading to the formation of an LRZ and a smaller CTRZ near the nozzle outlet.The confinement squeezes the CRZ to the corner and causes a reverse rotation flow to limit the shape of the CTRZ.A large-scale flow structure caused by the main stage features an explosive breakup,flapping,and Precessing Vortex Core(PVC).The explosive breakup mode dominates the swirling flow structures owing to the expansion and construction of the main jet,whereas the flapping mode is related to the wake perturbation.Confinement limits the expansion of PVC and causes it to contract after the impacting area.展开更多
Interaction flow field of the sonic air jet through diamond shaped orifices at different incidence angles (10 degrees, 27.5 degrees, 45 degrees and 90 degrees) and total pressures (0.10 MPa and 0. 46 MPa) with a M...Interaction flow field of the sonic air jet through diamond shaped orifices at different incidence angles (10 degrees, 27.5 degrees, 45 degrees and 90 degrees) and total pressures (0.10 MPa and 0. 46 MPa) with a Mach 5.0 freestream was studied experimentally. A 90 degrees circular injector was examined for comparison. Crosssection Mach number contours were acquired by a Pitot-cone five-hole pressure probe. The results indicate that the low Mach semicircular region close to the wall is the wake region. The boundary layer thinning is in the areas adjacent to the wake. For the detached case, the interaction shock extends further into the freestream, and the shock shape has more curvature, also the low-Mach upwash region is larger. The vortices of the plume and the height of the jet interaction shock increase with increasing incidence angle and jet pressure. 90 degrees diamond and circular injector have stronger plume vorticity, and for the circular injector low-Mach region is smaller than that for the diamond injector. Tapered ramp increases the plume vorticity, and the double ramp reduces the level of vorticity. The three-dimensional interaction shock shape was modeled from the surface shock shape, the center plane shock shape, and crosssectional shock shape. The shock total pressure was estimated with the normal component of the Mach number using normal shock theory. The shock induced total pressure losses decrease with decreasing jet incidence angle and injection pressure, where the largest losses are incurred by the 90 degrees, circular injector.展开更多
A dressed-state perturbation theory beyond the rotating wave approximation (RWA) is presented to investigate the interaction between a two-level electronic transition of polar molecules and a quantized cavity field....A dressed-state perturbation theory beyond the rotating wave approximation (RWA) is presented to investigate the interaction between a two-level electronic transition of polar molecules and a quantized cavity field. Analytical expressions can be explicitly derived for both the ground- and excited-state-energy spectrums and wave functions of the system, where the contribution of permanent dipole moments (PDM) and the counter-rotating wave term (CRT) can be shown separately. The validity of these explicit results is discussed by comparison with the direct numerical simulation. Compared to the CRT coupling, PDM results in the coupling of more dressed states and the energy shift is proportional to the square of the normalized permanent dipole difference, and a greater Bloch-Siegert shift can be produced in the giant dipole molecule cavity QED. In addition, our method can also be extended to the solution of the two-level atom Rabi model Hamiltonian beyond the RWA.展开更多
In counter-rotating electrochemical machining (CRECM), a revolving cathode tool with hollow windows of various shapes is used to fabricate convex structures on a revolving part. During this process, the anode workpi...In counter-rotating electrochemical machining (CRECM), a revolving cathode tool with hollow windows of various shapes is used to fabricate convex structures on a revolving part. During this process, the anode workpiece and the cathode tool rotate relative to each other at the same rotation speed. In contrast to the conventional schemes of ECM machining with linear motion of a block tool electrode, this scheme of ECM is unique, and has not been adequately studied yet. In this paper, the finite element method (FEM) is used to simulate the anode shaping process during CRECM, and the simulation process which involves a meshing model, a moving boundary, and a simulation algorithm is described. The simulated anode profiles of the convex structure at different processing times show that the CRECM process can be used to fabricate convex structures of various shapes with different heights. Besides, the variation of the inter-electrode gap indicates that this process can also reach a relative equilibrium state like that in conventional ECM. A rectangular convex and a circular convex are successfully fabricated on revolving parts. The experimental results indicate relatively good agreement with the simulation results. The proposed simulation process is valid for convex shaping prediction and feasibility studies as well.展开更多
Three-dimensional,viscous,and unsteady CFD simulations have been performed in order to reveal the influencing factors of hot streaks migration in high pressure stage of a vaneless counter-rotating turbine. Based on th...Three-dimensional,viscous,and unsteady CFD simulations have been performed in order to reveal the influencing factors of hot streaks migration in high pressure stage of a vaneless counter-rotating turbine. Based on the numerical results,the comparison between the case with inlet hot streaks and case without inlet hot streaks is carried out,which shows that the effect of inlet hot streaks on the load distributions of high pressure turbine airfoils is not notable and the airfoil load distributions are directly related to the inlet pressure distributions. The predicted results also indicate that the circumferential and radial movements of the hot streaks were not observed in the high pressure turbine stator. This means that the combined effects of secondary flow and buoyancy are very weak in the high pres-sure turbine stator. The numerical results also prove that the circumferential flow angle effect at the inlet of the high pressure turbine rotor,secondary flow effect and buoyancy effect are the mainly influencing factors to directly affect the migration characteristics of the hot streaks in the high pressure turbine rotor.展开更多
Counter-rotating electrochemical machining(CRECM)is a novel shaping method with advantages in processing revolving parts,especially engine casings.However,few researchers have studied the anodic behaviour of the count...Counter-rotating electrochemical machining(CRECM)is a novel shaping method with advantages in processing revolving parts,especially engine casings.However,few researchers have studied the anodic behaviour of the counter-rotating state.This paper aims to analyse the anode dissolution behaviour of TA15 and obtain desired surface qualities in CRECM.The anodic characteristics were measured by polarization and cyclic voltammetry curves,and the passive-trans passive behaviour of TA15 was revealed.The electrode surface structures at different stages were analysed using electrochemical impedance spectroscopy(EIS),and a quantitative dissolution model was established to illustrate the electrochemical dissolution and structural evolution of the revolving surfaces.A series of CRECM experiments were conducted,and three stages(pitting corrosion,pitting expansion,and smoothing)were detected according to the current signals.In the first stage,an oxide film with small pores was formed initially on the metal surface when exposed to air.This air-formed oxide film was broken down locally during the electrochemical reaction process,resulting in the occurrence of pitting.With the increase of electricity,the oxide layer became thinner,and the pitting areas expanded and began to connect with each other.In this stage,the surface quality was poor owing to the uneven material dissolution.When the amount of electricity approximately reached a constant,the oxide layer was completely removed,and a very thin salt film was generated at the metal-electrolyte interface.In this stage,the material was dissolved uniformly,and the surface was smooth without pitting corrosion.Based on the obtained results,anode workpieces with grid-like convex structures were fabricated using CRECM.Both the revolving surface and the sidewalls of the convex structures can be controlled from pitting to smoothness.展开更多
The inter-electrode gap(IEG) is an essential parameter for the anode shaping process in electrochemical machining(ECM) and directly affects the machining accuracy. In this paper, the IEG during the leveling process of...The inter-electrode gap(IEG) is an essential parameter for the anode shaping process in electrochemical machining(ECM) and directly affects the machining accuracy. In this paper, the IEG during the leveling process of an oval anode workpiece in counter-rotating ECM(CRECM)is investigated. The variation of the minimum IEG is analyzed theoretically, and the results indicate that rather than reaching equilibrium, the minimum IEG in CRECM expands constantly when a constant feed speed is used for the cathode tool. This IEG expansion leads to a poor localization effect and has an adverse influence on the roundness of the machined workpiece. To maintain a small constant IEG in CRECM, a variable feed speed is used for the cathode based on a fitted equation. The theoretical results show that the minimum IEG can be controlled at a small value by using an accelerated feed speed. Experiments have been conducted using a specific experimental apparatus in which the cathode tool is designed as a combined structure of two sectors and a thin sheet. By detecting the machining currents flowing through the minimum IEG, how the latter varies is obtained indirectly. The results indicate that using an accelerated feed speed is effective for controlling the IEG, thereby improving the roundness of the machined workpiece.展开更多
An experimental investigation has been performed to study the unsteady pressure fluctuation of rotor tip region in high pressure stage of a vaneless counter-rotating turbine.The experiment is carried out on a blow-dow...An experimental investigation has been performed to study the unsteady pressure fluctuation of rotor tip region in high pressure stage of a vaneless counter-rotating turbine.The experiment is carried out on a blow-down short duration turbine facility.The investigation indicates that the blow-down short duration turbine facility is capable of substituting continuous turbine facilities in most turbine testing.Through this experimental investigation,a distinct blade-to-blade variation is observed.The results indicate that the combined effects of vane wake,tip leakage flow,complicated wave systems and rotor wake induce the remarkable blade-to-blade variations.The results also show that the unsteady effect is intensified along the flow direction.展开更多
基金supported by the National Natural Science Foundation of China(11704345)the Key Laboratory of Science and Technology for National Defence Foundation(9140C290304140C29133)
文摘The underwater counter-rotation propeller non-cavitation noise has an obvious mod- ulation characteristic which is due to the interaction of flow and blade. A modulation mecha- nism is presented in this paper. A sound pressure spectrum model is presented to describe its non-cavitation noise with application of generalized acoustic analogy method, the modulation mechanism is expressed with the improvement of sound pressure model. The power spectrum and modulation spectrum are presented by numerical simulation. Theoretical analysis and nu- merical simulation results are verified by the cavitation tunnel experiment. The modulation model of counter-rotation propeller is beneficial to the prediction modulation characteristics and identification of underwater high-speed vehicles.
文摘Line-Spectrum noise of counter-rotation propellers has constructed the main part of the radiated noise of high speed vehicles in water. The line-spectrum noise of the counter-rotation propellers is due to the interaction between fore or aft propeller and wake of the vehicle,and the interaction between fore and aft propeller. Based on a combination of the lifting surface theory and acoustic method, the prediction of line-spectrum noise is presented in this paper.Theoretical calculation method, characteristics and numerical prediction of the line-spectrum noise are detailed too. The effect of different wake and different distance between fore and aft propeller on the propeller noise is also studied by numerical method. The agreement of predicted results compared with existing experimental data is quite satisfactory.
文摘Ocean energy has a potential of providing a large amount of renewable energy around the world. One of the forms of ocean energy, tidal stream power is widely recognized as the continuous, predictable and eco-friendly ocean energy source. Unique tandem propellers that can counter-rotate have been designed to generate electric power effectively from a tidal stream. This type of power unit has several advantages compare to the conventional unit with a single propeller. At the design of the tidal stream power unit, it is important to investigate the structure of the tip vortex tubes shedding to predict the load of the propeller. In this research, we investigated the tip vortex shedding using the CFD method for the conventional single propeller and counter-rotating type tandem propellers and estimated the performance efficiency using RANS (Reynolds Averaged Navier-Stokes) model and we confirmed the limitation of RANS model on the calculation of the tip vortex stretching.
文摘Traditional type pumped storage system contributes to adjust the electric power unbalance between day and night, in general. The pump-turbine unit is prepared for the power stabilization system, in this serial research, to provide the constant power with good quality for the grid system, even at the suddenly fluctuating/turbulent output from renewable energies. In the unit, the angular momentum changes through the front impeller/runner must be the same as that through the rear impeller/runner, that is, the axial flow at the outlet should be the same to the axial flow at the inlet. Such flow conditions are advantageous to work at not only the pumping mode but also the turbine mode. This work discusses experimentally the performance of the unit, and verifies that this type unit is very effective to both operating modes.
基金Supported by Program for New Century Excellent Talents in University,China(Grant No.10-0074)
文摘Electrochemical machining (ECM) has been widely used in the aerospace, automotive, defense and medical industries for its many advantages over traditional machining methods. However, the machining accuracy in ECM is to a great extent limited by the stray corrosion of the unwanted material removal. Many attempts have been made to improve the ECM accuracy, such as the use of a pulse power, passivating electrolytes and auxiliary electrodes. However, they are sometimes insufficient for the reduction of the stray removal and have their limitations in many cases. To solve the stray corrosion problem in CRECM, insulating and conductive coatings are respectively used. The different implement processes of the two kinds of coatings are introduced. The effects of the two kinds of shielding coatings on the anode shaping process are investigated. Numerical simulations and experiments are conducted for the comparison of the two coatings. The simulation and experimental results show that both the two kinds of coatings are valid for the reduction of stray corrosion on the top surface of the convex structure. However, for insulating coating, the convex sidewall becomes concave when the height of the convex structure is over 1.26 ram. In addition, it is easy to peel off by the high-speed electrolyte. In contrast, the conductive coating has a strong adhesion, and can be well reserved during the whole machining process. The convex structure fabricated by using a conductive iron coating layer presents a favorable sidewall profile. It is concluded that the conductive coating is more effective for the improvement of the machining quality in CRECM. The proposed shielding coatings can also be employed to reduce the stray corrosion in other schemes of ECM.
基金supported by National Natural Science Foundation of China (Grant Nos. 50879026, 50679027)
文摘With the increasing demand for the clean sustainable power, the turbine design urgently turns to increase the capability significantly toward higher head for generating larger power. Currently, there are many studies in the field of the bulb turbine with single-stage runner, though reports about counter-rotating tandem-runner are rare. However, the further high-head application with the single-stage runner is very difficult to achieve due to the limit of the specific speed. In this paper, a new bulb turbine with the tandem-runner is designed in order to substantially increase the applicable limit toward higher head with larger power. A half of the net head is absorbed by the frontal runner which can generate output power, while the remaining half is absorbed by the rear runner. To generate the Euler energy required for the rear runner, the frontal runner has the counter-rotation against the rear runner so that the counter-rotating tandem-runner can meet the purpose of double head and power under the same size as the conventional bulb turbine. Supply and demand of Euler energy between the two runners are thoroughly optimized through the detailed flow analysis, in order to secure the stable operation. As a result, the interference of Euler energies between the outflow from the frontal runner and the inflow to the rear runner is confirmed to be very small on the counter-rotating interface between the two runners. The prediction method of on-cam performance between the two adjustable runners is also developed numerically, which provides optimal flow between the two runners. This research provides a theoretical basis for the optimal design and operation of the counter-rotating tandem-runner bulb turbines.
文摘This paper studies the communication problem at the counter-rotating seam of the low-orbit satellite based on the walker constellation. The counter-rotating seam has a short life cycle, low capacity, and dynamic geometric parameters. To better utilize the scarce link resources at the seam, increase network throughput, and approach the physical limits of the link throughput at the seam, an initial phase condition that maximizes the relative rotational joint link throughput is calculated. In the experimental simulation results using the Iridium system as an example, it is shown that better throughput can be obtained under the initial conditions, and the throughput is improved by about 30%.
基金Project supported by the National Natural Science Foundation of China(Grants Nos.61690223,11561121002,61521093,11227902,11404356,and 11574332)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB16)
文摘Most of the schemes for generating isolated attosecond pulses(IAP) are sensitive to the carrier-envelope phase(CEP)of the driving lasers. We propose a scheme for generating IAP using two-color counter-rotating circularly polarized(TCCRCP) laser pulses. The results demonstrate that the dependence of the IAP generation on CEP stability is largely reduced in this scheme. IAP can be generated at most of CEPs. Therefore, the experiment requirements become lower.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61575077 and 11904122)the Natural Science Foundation of Jilin Province of China(Grant No.20180101225JC)the China Postdoctoral Science Foundation(Grant Nos.2018M641766 and 2019T120232).
文摘We theoretically investigated the properties of the high-order harmonic generation from an argon atom by bichromatic counter-rotating circularly polarized(BCCP)laser field.The harmonic emission processes have been illustrated by numerically solving the two-dimensional time-dependent Schr¨odinger equation of an atom in intense laser fields.It is found that with the decrease of the right-circularly polarized laser wavelength,the harmonic spectra are gradually splitting and the harmonic orders move towards the higher frequency.Meanwhile,the integer and semi-integer harmonic emission will be generated when the frequency ratios of right-and left-circularly polarized lasers are semi-integer.The emission mechanism of the semi-integer-order harmonics has been investigated by using the rules of photon absorption and emission.
基金Project supported by the National Natural Science Foundation of China(Grant No.12074142)the Natural Science Foundation of Jilin Province of China(Grant No.20180101225JC)the Graduate Innovation Fund of Jilin University,China(Grant No.101832020CX337)。
文摘We theoretically investigate the effects of different electronic states as the initial state on the vortex patterns in photoelectron momentum distributions(PMDs)from numerical solutions of the two-dimensional(2D)time-dependent Schrodinger equation(TDSE)of He^(+)with a pair of counter-rotating circularly polarized attosecond pulses.It is found that the number of spiral arms in vortex patterns is equal to the number of the absorbed photons when the initial state is the ground state.However,the number of spiral arms in vortex patterns is always two more than the number of the absorbed photons when the initial state is the excited state.This sensitivity is attributed to the initial electron density distribution.In addition,we have demonstrated the PMDs for different initial electronic states with the same wavelengths and analyzed their corresponding physical mechanisms.It is illustrated that the method presented can be employed to effectively control the distribution of the electron vortices.
基金the National Key Research and Development Program of China(Grant Nos.2019YFA0307700 and 2017YFA0403300)the National Natural Science Foundation of China(Grant Nos.11627807,11774175,11534004,11774129,11975012,and 11604119)+1 种基金the Fundamental Research Funds for the Central Universities of China(Grant No.30916011207)the Jilin Provincial Research Foundation for Basic Research,China(Grant No.20170101153JC).
文摘We investigate high-order harmonic generation from atoms irradiated by bichromatic counter-rotating circularly polarized laser pulses by numerically solving the time-dependent Schrödinger equation.It is found that the minimum energy position of the harmonic spectrum and the non-integer order optical radiation are greatly discrepant for different atomic potentials.By analyzing the quantum trajectory of the harmonic emission,discrepancies among the harmonic spectra from different potentials can be attributed to the action of the potential on the ionized electrons.In addition,based on the influence of the driving light intensity on the overall intensity and ellipticity of higher order harmonics,the physical conditions for generating a high-intensity circularly polarized harmonic can be obtained.
文摘Tidal stream power units with horizontal-axis propellers are one of promising technologies for generating the renewable green energy. The ebb and flow require that the power unit must operate in bidirectional tidal streams. Hence a tidal stream power unit with counter-rotating type horizontal-axis bidirectional propellers is proposed in this paper. The blades with fully-symmetrical hydrofoils were optimized numerically. The output and flow conditions predicted by the computational fluid dynamics simulations are compared with the results of the wind tunnel experiments at the higher tip speed ratios, which are of expected usual operating conditions of this unit. The numerical and experimental results show good agreements. It is also confirmed that the flow discharged from the counter-rotating type propellers has no swirling component, though the single propeller generates the unacceptable swirling component.
基金supported by the National Natural Science Foundation of China(Nos.12232002,12072017,12002199,and 11721202)。
文摘Three-Dimensional(3D)swirling flow structures,generated by a counter-rotating dualstage swirler in a confined chamber with a confinement ratio of 1.53,were experimentally investigated at Re=2.3×10^(5)using Tomographic Particle Image Velocimetry(Tomo-PIV)and planar Particle Image Velocimetry(PIV).Based on the analysis of the 3D time-averaged swirling flow structures and 3D Proper Orthogonal Decomposition(POD)of the Tomo-PIV data,typical coherent flow structures,including the Corner Recirculation Zone(CRZ),Central Recirculation Zone(CTRZ),and Lip Recirculation Zone(LRZ),were extracted.The counter-rotating dual-stage swirler with a Venturi flare generates the independence process of vortex breakdown from the main stage and pilot stage,leading to the formation of an LRZ and a smaller CTRZ near the nozzle outlet.The confinement squeezes the CRZ to the corner and causes a reverse rotation flow to limit the shape of the CTRZ.A large-scale flow structure caused by the main stage features an explosive breakup,flapping,and Precessing Vortex Core(PVC).The explosive breakup mode dominates the swirling flow structures owing to the expansion and construction of the main jet,whereas the flapping mode is related to the wake perturbation.Confinement limits the expansion of PVC and causes it to contract after the impacting area.
文摘Interaction flow field of the sonic air jet through diamond shaped orifices at different incidence angles (10 degrees, 27.5 degrees, 45 degrees and 90 degrees) and total pressures (0.10 MPa and 0. 46 MPa) with a Mach 5.0 freestream was studied experimentally. A 90 degrees circular injector was examined for comparison. Crosssection Mach number contours were acquired by a Pitot-cone five-hole pressure probe. The results indicate that the low Mach semicircular region close to the wall is the wake region. The boundary layer thinning is in the areas adjacent to the wake. For the detached case, the interaction shock extends further into the freestream, and the shock shape has more curvature, also the low-Mach upwash region is larger. The vortices of the plume and the height of the jet interaction shock increase with increasing incidence angle and jet pressure. 90 degrees diamond and circular injector have stronger plume vorticity, and for the circular injector low-Mach region is smaller than that for the diamond injector. Tapered ramp increases the plume vorticity, and the double ramp reduces the level of vorticity. The three-dimensional interaction shock shape was modeled from the surface shock shape, the center plane shock shape, and crosssectional shock shape. The shock total pressure was estimated with the normal component of the Mach number using normal shock theory. The shock induced total pressure losses decrease with decreasing jet incidence angle and injection pressure, where the largest losses are incurred by the 90 degrees, circular injector.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB01010200)the Hundred Talents Program of the Chinese Academy of Sciences(Grant No.Y321311401)+2 种基金the National Natural Science Foundation of China(Grant Nos.61475139,11347147,and11247014)the National Basics Research Program of China(Grant No.2013CB329501)the Zhejiang Provincial Natural Science Foundation(Grant No.LQ13A040006)
文摘A dressed-state perturbation theory beyond the rotating wave approximation (RWA) is presented to investigate the interaction between a two-level electronic transition of polar molecules and a quantized cavity field. Analytical expressions can be explicitly derived for both the ground- and excited-state-energy spectrums and wave functions of the system, where the contribution of permanent dipole moments (PDM) and the counter-rotating wave term (CRT) can be shown separately. The validity of these explicit results is discussed by comparison with the direct numerical simulation. Compared to the CRT coupling, PDM results in the coupling of more dressed states and the energy shift is proportional to the square of the normalized permanent dipole difference, and a greater Bloch-Siegert shift can be produced in the giant dipole molecule cavity QED. In addition, our method can also be extended to the solution of the two-level atom Rabi model Hamiltonian beyond the RWA.
基金supported by the Program for New Century Excellent Talents in University of China(NCET-10-0074)
文摘In counter-rotating electrochemical machining (CRECM), a revolving cathode tool with hollow windows of various shapes is used to fabricate convex structures on a revolving part. During this process, the anode workpiece and the cathode tool rotate relative to each other at the same rotation speed. In contrast to the conventional schemes of ECM machining with linear motion of a block tool electrode, this scheme of ECM is unique, and has not been adequately studied yet. In this paper, the finite element method (FEM) is used to simulate the anode shaping process during CRECM, and the simulation process which involves a meshing model, a moving boundary, and a simulation algorithm is described. The simulated anode profiles of the convex structure at different processing times show that the CRECM process can be used to fabricate convex structures of various shapes with different heights. Besides, the variation of the inter-electrode gap indicates that this process can also reach a relative equilibrium state like that in conventional ECM. A rectangular convex and a circular convex are successfully fabricated on revolving parts. The experimental results indicate relatively good agreement with the simulation results. The proposed simulation process is valid for convex shaping prediction and feasibility studies as well.
文摘Three-dimensional,viscous,and unsteady CFD simulations have been performed in order to reveal the influencing factors of hot streaks migration in high pressure stage of a vaneless counter-rotating turbine. Based on the numerical results,the comparison between the case with inlet hot streaks and case without inlet hot streaks is carried out,which shows that the effect of inlet hot streaks on the load distributions of high pressure turbine airfoils is not notable and the airfoil load distributions are directly related to the inlet pressure distributions. The predicted results also indicate that the circumferential and radial movements of the hot streaks were not observed in the high pressure turbine stator. This means that the combined effects of secondary flow and buoyancy are very weak in the high pres-sure turbine stator. The numerical results also prove that the circumferential flow angle effect at the inlet of the high pressure turbine rotor,secondary flow effect and buoyancy effect are the mainly influencing factors to directly affect the migration characteristics of the hot streaks in the high pressure turbine rotor.
基金supported by the National Natural Science Foundation of China(Grant No.51805259)the National Natural Science Foundation of China for Creative Research Groups(Grant No.51921003)+1 种基金the China Postdoctoral Science Foundation(Grant No.2019M661833)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX21_0192)。
文摘Counter-rotating electrochemical machining(CRECM)is a novel shaping method with advantages in processing revolving parts,especially engine casings.However,few researchers have studied the anodic behaviour of the counter-rotating state.This paper aims to analyse the anode dissolution behaviour of TA15 and obtain desired surface qualities in CRECM.The anodic characteristics were measured by polarization and cyclic voltammetry curves,and the passive-trans passive behaviour of TA15 was revealed.The electrode surface structures at different stages were analysed using electrochemical impedance spectroscopy(EIS),and a quantitative dissolution model was established to illustrate the electrochemical dissolution and structural evolution of the revolving surfaces.A series of CRECM experiments were conducted,and three stages(pitting corrosion,pitting expansion,and smoothing)were detected according to the current signals.In the first stage,an oxide film with small pores was formed initially on the metal surface when exposed to air.This air-formed oxide film was broken down locally during the electrochemical reaction process,resulting in the occurrence of pitting.With the increase of electricity,the oxide layer became thinner,and the pitting areas expanded and began to connect with each other.In this stage,the surface quality was poor owing to the uneven material dissolution.When the amount of electricity approximately reached a constant,the oxide layer was completely removed,and a very thin salt film was generated at the metal-electrolyte interface.In this stage,the material was dissolved uniformly,and the surface was smooth without pitting corrosion.Based on the obtained results,anode workpieces with grid-like convex structures were fabricated using CRECM.Both the revolving surface and the sidewalls of the convex structures can be controlled from pitting to smoothness.
基金supported by the National Natural Science Foundation of China (51535006, 51805259)Natural Science Foundation of Jiangsu Province of China (BK20180431)+2 种基金Fundamental Research Funds for the Central Universities of China (3082018NP2018406)Young Elite Scientists Sponsorship Program by CAST of ChinaJiangsu Key Laboratory of Precision and Micro-Manufacturing Technology of China
文摘The inter-electrode gap(IEG) is an essential parameter for the anode shaping process in electrochemical machining(ECM) and directly affects the machining accuracy. In this paper, the IEG during the leveling process of an oval anode workpiece in counter-rotating ECM(CRECM)is investigated. The variation of the minimum IEG is analyzed theoretically, and the results indicate that rather than reaching equilibrium, the minimum IEG in CRECM expands constantly when a constant feed speed is used for the cathode tool. This IEG expansion leads to a poor localization effect and has an adverse influence on the roundness of the machined workpiece. To maintain a small constant IEG in CRECM, a variable feed speed is used for the cathode based on a fitted equation. The theoretical results show that the minimum IEG can be controlled at a small value by using an accelerated feed speed. Experiments have been conducted using a specific experimental apparatus in which the cathode tool is designed as a combined structure of two sectors and a thin sheet. By detecting the machining currents flowing through the minimum IEG, how the latter varies is obtained indirectly. The results indicate that using an accelerated feed speed is effective for controlling the IEG, thereby improving the roundness of the machined workpiece.
基金Supported by the Award Fund of the President of CASThe support of the WU ChungHua Award Foundation is gratefully acknowledged.
文摘An experimental investigation has been performed to study the unsteady pressure fluctuation of rotor tip region in high pressure stage of a vaneless counter-rotating turbine.The experiment is carried out on a blow-down short duration turbine facility.The investigation indicates that the blow-down short duration turbine facility is capable of substituting continuous turbine facilities in most turbine testing.Through this experimental investigation,a distinct blade-to-blade variation is observed.The results indicate that the combined effects of vane wake,tip leakage flow,complicated wave systems and rotor wake induce the remarkable blade-to-blade variations.The results also show that the unsteady effect is intensified along the flow direction.