Explosive welding technique is widely used in many industries.This technique is useful to weld different kinds of metal alloys that are not easily welded by any other welding methods.Interlayer plays an important role...Explosive welding technique is widely used in many industries.This technique is useful to weld different kinds of metal alloys that are not easily welded by any other welding methods.Interlayer plays an important role to improve the welding quality and control energy loss during the collision process.In this paper,the Ti6Al4V plate was welded with a copper plate in the presence of a commercially pure titanium interlayer.Microstructure details of welded composite plate were observed through optical and scanning electron microscope.Interlayer-base plate interface morphology showed a wavy structure with solid melted regions inside the vortices.Moreover,the energy dispersive spectroscopy analysis in the interlayer-base interface reveals that there are some identified regions of different kinds of chemical equilibrium phases of CueTi,i.e.CuTi,Cu_(2)Ti,CuTi_(2),Cu_(4)Ti,etc.To study the mechanical properties of composite plates,mechanical tests were conducted,including the tensile test,bending test,shear test and Vickers hardness test.Numerical simulation of explosive welding process was performed with coupled Smooth Particle Hydrodynamic method,Euler and Arbitrary Lagrangian-Eulerian method.The multi-physics process of explosive welding,including detonation,jetting and interface morphology,was observed with simulation.Moreover,simulated plastic strain,temperature and pressure profiles were analysed to understand the welding conditions.Simulated results show that the interlayer base plate interface was created due to the high plastic deformation and localized melting of the parent plates.At the collision point,both alloys behave like fluids,resulting in the formation of a wavy morphology with vortices,which is in good agreement with the experimental results.展开更多
通过使用外部工具的管子与管板摩擦焊(FWTPET)来焊接钛管和不锈钢管板。铜被用作连接不同材料的夹层,同时用来减小在接头界面形成的金属间化合物的影响。控制FWTPET过程的工艺参数包括切入速率、旋转速度、切入深度、轴向载荷和溢料槽...通过使用外部工具的管子与管板摩擦焊(FWTPET)来焊接钛管和不锈钢管板。铜被用作连接不同材料的夹层,同时用来减小在接头界面形成的金属间化合物的影响。控制FWTPET过程的工艺参数包括切入速率、旋转速度、切入深度、轴向载荷和溢料槽形状。其中,管的溢料槽形状对接头完整性具有很大的影响。在焊接到不锈钢管板的钛管上制作了各种溢料槽形状,如垂直槽、洞、曲折洞和花瓣型。宏观和微观研究表明接头没有缺陷。X射线衍射(XRD)、扫描电镜(SEM)和能谱(EDS)分析表明了铜层和金属间化合物的存在。研究横向和纵向焊接界面的显微硬度。使用一种新的测试程序称为"切入剪切试验"来检测焊接接头的性能。具有花瓣型溢料槽形状的试样具有最高的剪切断裂载荷(31.58 k N)。使用SEM进一步表征剪切面。展开更多
TiO2-SiO2 composite films were produced on commercially pure titanium (CP-Ti) substrate by a sol-gel method to in- vestigate the behavior of sol aging time and its potential effects on the structural and electrochem...TiO2-SiO2 composite films were produced on commercially pure titanium (CP-Ti) substrate by a sol-gel method to in- vestigate the behavior of sol aging time and its potential effects on the structural and electrochemical properties of composite coatings. Anatase-TiO2 and quartz-SiO2 peaks were observed on all composite coated samples according to XRD results. It was observed that the average grain size increased with sol aging time. Also, the average smallest grain size was seen at composite coatings prepared from unaged sol according to the width of the peaks. Electrochemical behavior of coated samples was mainly investigated by potentiodynamic polarization and Electrochemical Impedance Spectroscopy (EIS) in Simulated Body Fluid (SBF) solution. In corrosion tests, the composite coatings showed better anti-corrosion behavior than that of uncoated samples. In addition, the corrosion properties of the composite films were considerably affected by sol aging time. Corrosion resistance of coatings decreased with increasing aging time and the best result was obtained from composite coatings prepared from unaged sol.展开更多
Ti alloys with lattice structures are garnering more and more attention in the field of bone repair or regeneration due to their superior structural,mechanical,and biological properties.In this study,six types of comp...Ti alloys with lattice structures are garnering more and more attention in the field of bone repair or regeneration due to their superior structural,mechanical,and biological properties.In this study,six types of composite lattice structures with different strut radius that consist of simple cubic(structure A),body-centered cubic(structure B),and edge-centered cubic(structure C)unit cells are designed.The designed structures are firstly simulated and analysed by the finite element(FE)method.Commercially pure Ti(CP-Ti)lattice structures with optimized unit cells and strut radius are then fabricated by selective laser melting(SLM),and the dimensions,microtopography,and mechanical properties are characterised.The results show that among the six types of composite lattice structures,combined BA,CA,and CB structures exhibit smaller maximum von-Mises stress,indicating that these structures have higher strength.Based on the fitting curves of stress/specific surface area versus strut radius,the optimized strut radius of BA,CA,and CB structures is 0.28,0.23,and 0.30 mm respectively.Their corresponding compressive yield strength and compressive modulus are 42.28,30.11,and 176.96 MPa,and 4.13,2.16,and 7.84 GPa,respectively.The CP-Ti with CB unit structure presents a similar strength and compressive modulus to the cortical bone,which makes it a potential candidate for subchondral bone restorations.展开更多
文摘Explosive welding technique is widely used in many industries.This technique is useful to weld different kinds of metal alloys that are not easily welded by any other welding methods.Interlayer plays an important role to improve the welding quality and control energy loss during the collision process.In this paper,the Ti6Al4V plate was welded with a copper plate in the presence of a commercially pure titanium interlayer.Microstructure details of welded composite plate were observed through optical and scanning electron microscope.Interlayer-base plate interface morphology showed a wavy structure with solid melted regions inside the vortices.Moreover,the energy dispersive spectroscopy analysis in the interlayer-base interface reveals that there are some identified regions of different kinds of chemical equilibrium phases of CueTi,i.e.CuTi,Cu_(2)Ti,CuTi_(2),Cu_(4)Ti,etc.To study the mechanical properties of composite plates,mechanical tests were conducted,including the tensile test,bending test,shear test and Vickers hardness test.Numerical simulation of explosive welding process was performed with coupled Smooth Particle Hydrodynamic method,Euler and Arbitrary Lagrangian-Eulerian method.The multi-physics process of explosive welding,including detonation,jetting and interface morphology,was observed with simulation.Moreover,simulated plastic strain,temperature and pressure profiles were analysed to understand the welding conditions.Simulated results show that the interlayer base plate interface was created due to the high plastic deformation and localized melting of the parent plates.At the collision point,both alloys behave like fluids,resulting in the formation of a wavy morphology with vortices,which is in good agreement with the experimental results.
基金financial support provided by UGC-DAE-CSR (CSR-KN/CRS-04/201213/738) through fellowship
文摘通过使用外部工具的管子与管板摩擦焊(FWTPET)来焊接钛管和不锈钢管板。铜被用作连接不同材料的夹层,同时用来减小在接头界面形成的金属间化合物的影响。控制FWTPET过程的工艺参数包括切入速率、旋转速度、切入深度、轴向载荷和溢料槽形状。其中,管的溢料槽形状对接头完整性具有很大的影响。在焊接到不锈钢管板的钛管上制作了各种溢料槽形状,如垂直槽、洞、曲折洞和花瓣型。宏观和微观研究表明接头没有缺陷。X射线衍射(XRD)、扫描电镜(SEM)和能谱(EDS)分析表明了铜层和金属间化合物的存在。研究横向和纵向焊接界面的显微硬度。使用一种新的测试程序称为"切入剪切试验"来检测焊接接头的性能。具有花瓣型溢料槽形状的试样具有最高的剪切断裂载荷(31.58 k N)。使用SEM进一步表征剪切面。
文摘TiO2-SiO2 composite films were produced on commercially pure titanium (CP-Ti) substrate by a sol-gel method to in- vestigate the behavior of sol aging time and its potential effects on the structural and electrochemical properties of composite coatings. Anatase-TiO2 and quartz-SiO2 peaks were observed on all composite coated samples according to XRD results. It was observed that the average grain size increased with sol aging time. Also, the average smallest grain size was seen at composite coatings prepared from unaged sol according to the width of the peaks. Electrochemical behavior of coated samples was mainly investigated by potentiodynamic polarization and Electrochemical Impedance Spectroscopy (EIS) in Simulated Body Fluid (SBF) solution. In corrosion tests, the composite coatings showed better anti-corrosion behavior than that of uncoated samples. In addition, the corrosion properties of the composite films were considerably affected by sol aging time. Corrosion resistance of coatings decreased with increasing aging time and the best result was obtained from composite coatings prepared from unaged sol.
基金This research work is supported by the National Natural Science Foundation of China(51922004,51874037)State Key Lab of Advanced Metals and Materials,University of Science and Technology Beijing(2019-Z14)+4 种基金Fundamental Research Funds for the Central Universities(FRF-TP-19005C1Z)Chaozong Liu acknowledges the support from the European Commission via the H2020 MSCA RISE BAMOS programme(734156)Bo Su would like to thank the financial support from the MRC(MR/S010343/1)the EU H2020 MSCA RISE Bio-TUNE programmeWei Xu acknowledges the support from the China Scholarship Council(CSC)for a CSC Ph.D.scholarship(201906460106).
文摘Ti alloys with lattice structures are garnering more and more attention in the field of bone repair or regeneration due to their superior structural,mechanical,and biological properties.In this study,six types of composite lattice structures with different strut radius that consist of simple cubic(structure A),body-centered cubic(structure B),and edge-centered cubic(structure C)unit cells are designed.The designed structures are firstly simulated and analysed by the finite element(FE)method.Commercially pure Ti(CP-Ti)lattice structures with optimized unit cells and strut radius are then fabricated by selective laser melting(SLM),and the dimensions,microtopography,and mechanical properties are characterised.The results show that among the six types of composite lattice structures,combined BA,CA,and CB structures exhibit smaller maximum von-Mises stress,indicating that these structures have higher strength.Based on the fitting curves of stress/specific surface area versus strut radius,the optimized strut radius of BA,CA,and CB structures is 0.28,0.23,and 0.30 mm respectively.Their corresponding compressive yield strength and compressive modulus are 42.28,30.11,and 176.96 MPa,and 4.13,2.16,and 7.84 GPa,respectively.The CP-Ti with CB unit structure presents a similar strength and compressive modulus to the cortical bone,which makes it a potential candidate for subchondral bone restorations.
基金Supported by the National Nature Science Foundation of China (50874086)Special Programs Foundation of Ministry of Education of Shaanxi Province (07JK307)the Nature Science Foundation of Shaanxi Province (2005E105)
文摘在室温,采用通道夹角为120°的变形模具对工业纯钛(Commercial Pure Titanium,CP-Ti)以Bc方式实施四道次ECAP(Equal Channel Angular Pressing)挤压变形,成功获得表面光滑无裂纹的变形试样。文中主要研究了工业纯钛在室温下进行ECAP多道次变形的组织结构演变,并测试了变形试样的力学性能。微观结构显示工业纯钛在室温下进行多道次ECAP变形时,只在前两道次产生了大量的变形孪晶,且随道次增加变形孪晶逐渐消失。最终获得的试样晶粒平均尺寸由最初的约28μm细化到约250nm,试样断裂强度和显微硬度分别提高到773和2486MPa,而试样仍保持较好的延伸率(可达16.8%)。