With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environmen...With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environments, thereby endangering human health. Therefore, in this paper, a novel functionalized mesoporous adsorbent PPR-Z was synthesized from waste amidoxime resin for adsorbing Cr(Ⅵ). The waste amidoxime resin was first modified with H3PO4 and ZnCl_(2), and subsequently, it was carbonized through slow thermal decomposition. The static adsorption of PPR-Z conforms to the pseudo-second-order kinetic model and Langmuir isotherm, indicating that the Cr(Ⅵ) adsorption by PPR-Z is mostly chemical adsorption and exhibits single-layer adsorption. The saturated adsorption capacity of the adsorbent for Cr(Ⅵ) could reach 255.86 mg/g. The adsorbent could effectively reduce Cr(Ⅵ) to Cr(Ⅲ) and decrease the toxicity of Cr(Ⅵ) during adsorption. PPR-Z exhibited Cr(Ⅵ) selectivity in electroplating wastewater. The main mechanisms involved in the Cr(Ⅵ) adsorption are the chemical reduction of Cr(Ⅵ) into Cr(Ⅲ) and electrostatic and coordination interactions. Preparation of PPR-Z not only solves the problem of waste resin treatment but also effectively controls Cr(Ⅵ) pollution and realizes the concept of “treating waste with waste”.展开更多
A comparison between the effects of ordinary walnut shell and phosphoric acid modified walnut shell on adsorption of Cr（Ⅵ） was carried out. The experimental results showed that owing to larger surface void of modif...A comparison between the effects of ordinary walnut shell and phosphoric acid modified walnut shell on adsorption of Cr（Ⅵ） was carried out. The experimental results showed that owing to larger surface void of modified walnut shell its adsorption of Cr（Ⅵ） was better. When the temperature was 35 ℃, adsorbent particle size was 1.0-1.6 mm, shaker shock rate was 200 r/min, and dosage of walnut shell was 0.80 g, the Cr（Ⅵ） removal rate reached 99.4%. The fitting of adsorption isotherm and kinetics model showed that, Langmuir isotherm model could reflect the adsorption process of modified walnut shell; and both the adsorption processes of ordinary and modified walnut shells accorded with the pseudo-second-order kinetic equations.展开更多
It is observed that the adsorption of chromium are greater on kaolinite minerals, red soil (R) and laterite (L) colloids than that on montmorillonite, indicotic black (IB) and yellow brown (YB) soil colloids. The adso...It is observed that the adsorption of chromium are greater on kaolinite minerals, red soil (R) and laterite (L) colloids than that on montmorillonite, indicotic black (IB) and yellow brown (YB) soil colloids. The adsorption process of Cr Ⅵ on these media can be further described by Langmuir or Freundlich equation quite well. The adsorption reaction of Cr Ⅵ is fast, and the adsorption equilibrium can be reached within the first two hours in moderate temperature. The adsorption quantity of Cr Ⅵ to kaolinite mineral increased with the increasing pH in the range of 2.0 to 7.0, then decreased at higher pH. But it showed some consistence among the four soil colloids. The lower the pH, the stronger the adsorption. The possible mechanisms are further discussed here. Meanwhile the influence of temperature on Cr Ⅵ adsorption on different soil colloid and clay minerals are also investigated.展开更多
Herein,iron oxide/hydroxides deposits(gossans)were utilized,for the first time,in the fabrication of magnetite nanoparticles(MNPs)to load modified coal(MC).The as-synthesized MNPs@MC composite was characterized via di...Herein,iron oxide/hydroxides deposits(gossans)were utilized,for the first time,in the fabrication of magnetite nanoparticles(MNPs)to load modified coal(MC).The as-synthesized MNPs@MC composite was characterized via different techniques and utilized for the Cr(Ⅵ)remediation.Experimental studies supported by theoretical treatment were applied to offer a new overview of the Cr(Ⅵ)adsorption geometry and mechanism at 25-45℃.Experimental results suggested that the Cr(Ⅵ)uptake was mainly governed by adsorption-reduction coupled mechanism.The Langmuir model fitted well the Cr(Ⅵ)adsorption data with maximum adsorption capacities extended from 115.24 to 129.63 mg·g^(-1).Theoretical calculations indicated that Cr(Ⅵ)ions were adsorbed on the MNPs@MC following the theory of the advanced monolayer statistical model.The number of ions removed per site ranged from 1.88 to1.23 suggesting the involvement of vertical geometry and multi-ionic mechanism at all temperatures.The increment of the active sites density and the adsorption capacity at saturation with improving temperature reflected an endothermic process.Energetically,the Cr(Ⅵ)adsorption was controlled by physical forces as the adsorption energies were less than 40 kJ·mol^(-1).The calculated free enthalpy,entropy.and internal energy explained the spontaneous nature and the viability of Cr(Ⅵ)adsorption on the MNPs@MC adsorbent.These results offer a new approach in utilizing the iron-rich deposits as gossans in the preparation of magnetic and low-cost adsorbents for wastewater remediation.展开更多
Sugarcane pulp residue （SPR）, a waste from sugar-refinery, which possesses a large surface area, can be used for removing chromium （Cr（Ⅲ） and Cr（Ⅵ）） from wastewater. In this work, the kinetics, isotherms of...Sugarcane pulp residue （SPR）, a waste from sugar-refinery, which possesses a large surface area, can be used for removing chromium （Cr（Ⅲ） and Cr（Ⅵ）） from wastewater. In this work, the kinetics, isotherms of Cr（Ⅲ） and Cr（V[） adsorption and their removal by SPR were investigated. The results show that the removal percentages of Cr（Ⅵ） and Cr（Ⅲ） increase with increasing SPR dosage and temperature and decrease with increasing SPR particle size and the initial concentration of chromium ions. However, the influence of pH value on the Cr（Ⅵ） removal differs from that of the Cr（Ⅲ） removal. The Cr（Ⅵ） removal percentage decreases with increasing pH values, while the Cr（Ⅲ） removal percentage increases with increasing pH value. The adsorption kinetics of Cr（Ⅵ） and Cr（Ⅲ） well fits with pseudo-second-order model. Langmuir adsorption isotherm can well describe the adsorption phenomena of chromium ions with the maximum adsorption capacity of 0.567 mg/g for Cr（Ⅵ） and 3.446 mg/g for Cr（Ⅲ）. Moreover, SPR reveals higher adsorption capacity for Cr（Ⅲ） than that for Cr（Ⅵ）, which implies that SPR has more potential application for Cr（Ⅲ）-containing wastewater treatment than that for Cr（Ⅵ）-containing wastewater treatment.展开更多
Magnetic multi-wall carbon nanotubes were prepared with wet chemical treatments and characterized by a transmission electron microscope （TEM） and X-ray diffraction （XRD）. They were used as adsorbents for the remov...Magnetic multi-wall carbon nanotubes were prepared with wet chemical treatments and characterized by a transmission electron microscope （TEM） and X-ray diffraction （XRD）. They were used as adsorbents for the removal of Cr（VI） in aqueous solutions. The effects of adsorbent dosage, the concentration of Cr（VI） in aqueous solution, temperature, and pH value on the removal efficiency were studied. Results showed that the adsorption capacity of the magnetic multi-wall carbon nanotubes increased with the initial Cr（VI） concentration, but decreased with the increase of adsorbent dosage. The adsorption amount increased with contact time. The adsorption kinetics were best represented by the pseudo second-order kinetic model, and the adsorption isotherms indicated that the Langmuir model better reflected the adsorption process. The ob- tained calculation results for the Gibbs free energy revealed that the adsorption was a spontaneous and endothermic process. The enthalpy deviation was 3.835 kJ.mol 1. The magnetic multi-wall carbon nanotubes showed significant potential for application in adsorption of heavy metal ions.展开更多
The adsorption capability of D318 resin for Cr（Ⅵ） was investigated by chemistry analysis. Experimental results show that D318 resin has the best adsorption ability for Cr（Ⅵ） at pH=3.16 in HAc-NaAc medium. The st...The adsorption capability of D318 resin for Cr（Ⅵ） was investigated by chemistry analysis. Experimental results show that D318 resin has the best adsorption ability for Cr（Ⅵ） at pH=3.16 in HAc-NaAc medium. The statically saturated adsorption capacity of the resin is 265.4 mg/g. The thermodynamic adsorption parameters, enthalpy change AH and free energy change AG298 of the adsorption reaction are 4.81 and -5.16 kJ/mol, respectively. The apparent activation energy Ea is 22.4 kJ/mol. The adsorption behavior obeys the Freundlich isotherm. The molar coordination ratio of the functional group of resin to Cr（Ⅵ） is 3：2. Cr（Ⅵ） adsorbed on D318 resin can be eluted by 5%NaOH-5%NaCl quantitatively.展开更多
The adsorption properties of XSD-296 for Cr(Ⅵ) were studied by using chemical analysis and infrared spectrometry. Experimental results show that XSD-296 resin has a good adsorption ability for Cr(Ⅵ) at pH=2.6 in the...The adsorption properties of XSD-296 for Cr(Ⅵ) were studied by using chemical analysis and infrared spectrometry. Experimental results show that XSD-296 resin has a good adsorption ability for Cr(Ⅵ) at pH=2.6 in the HAc-NaAc medium. The statically saturated adsorption capacity is 235 mg/g resin. The apparent activation energy of adsorption reaction, Ea, is 16.73 kJ/mol, and the thermodynamic parameters are △H=11.62 kJ/mol, △G298 K=-4.13 kJ/mol. The adsorption behavior of resin for Cr(Ⅵ) is in accordance with Freundlich adsorption isotherm. Cr( Ⅵ ) adsorbed on resin can be eluted by 5%NaCl-5%NaOH or 5%NH4Cl-5%NH3·H2O quantitatively. Infrared spectra and adsorption mechanism show that the functional group of resin coordinates with Cr(Ⅵ) to form co-ordination compound. The coordination molar ratio of the functional group of resin to Cr(Ⅵ) is 1:1.展开更多
In this study, a novel adsorption material amino terminated hyperbranched polyamide collagen fiber( CF-HBPN)was prepared by loading amino terminated hyperbranched polyamide( HBPN) which was synthesized by polycondensa...In this study, a novel adsorption material amino terminated hyperbranched polyamide collagen fiber( CF-HBPN)was prepared by loading amino terminated hyperbranched polyamide( HBPN) which was synthesized by polycondensation of methacrylate and diethylenetriamine onto the surface of collagen fiber( CF) with glutaraldehyde as the cross-linking agent. X-ray photoelectron spectroscopy( XPS) and thermogravimetric analysis( TGA) were employed to characterize the structures of CF and CFHBPN. In addition,the adsorption property of CF-HBPN toward Cr( Ⅵ) and adsorption thermodynamic were studied as well. The experimental results indicated that the Cr( Ⅵ) 's removal rate by CF-HBPN was 3. 09 higher than that of CF under the same conditions. Langmuir single layer adsorption model was found more suitable to describe the adsorption process than Freundlich adsorption model. The adsorption process was an endothermic reaction. The adsorption efficiency was enhanced with the increase of temperature. X-ray diffraction( XRD) was employed to elucidate the difference between CF-HBPN and Cr( Ⅵ) loaded CF-HBPN[CF-HBPN-Cr( Ⅵ) ].展开更多
The advantage of using an available and abundant residual biomass, such as lignin, as a raw material for activated carbons is that it provides additional economical interest to the technical studies. In the current in...The advantage of using an available and abundant residual biomass, such as lignin, as a raw material for activated carbons is that it provides additional economical interest to the technical studies. In the current investigation, a more complete understanding of adsorption of Cr（VI） from aqueous systems onto HaPO4-acid activated lignin has been achieved via microcolumns, which were operated under various process conditions. The practice of using microcolumn is appropriate for defining the adsorption parameters and for screening a large number of poten- tial adsorbents. The effects of solution pH （2-8）, initial metal ion concentration （0.483-1.981 mmol.L-1）, flow rate （1.0-3.1 cm3-min-1）, ionic strength （0.01-0.30 mmol-L-1） and adsorbent mass （0.11 0.465 g） on Cr（VI） adsorption were studied by assessing the microcolmnn breakthrough curve. The microcolumn data were fitted by the Thomas model, the modified Dose model and the BDST model. As expected, the adsorption capacity increased with initial Cr（VI） concentration. High linear flow rates, pH values and ionic strength led to early breakthrough of Cr（VI）. The model constants obtained in this study can be used for the design of pilot scale adsorption process.展开更多
[ Objective] The research aimed to study the adsorption capability of Fe modifying sepiolite on Cr（Vl）. [ Method] FeCl3 solution with different concentrations was used to modify sepiolite. By static adsorption exper...[ Objective] The research aimed to study the adsorption capability of Fe modifying sepiolite on Cr（Vl）. [ Method] FeCl3 solution with different concentrations was used to modify sepiolite. By static adsorption experiment, the adsorption capability of Fe modifying sepiolite on Cr（VI ） was studied. [Result] Under the condition of initial Cr（VI） concentration of 90 mg/L, 10.0% IMS dosage of 5 g/L, pH of 4.5, adsorption time of 90 min, and temperature of 25 ℃ the equilibrium adsorption quantity of Fe modifying sepiolite was 6.5 mg/g. [Conclusion] The research provided an effective pathway for the application of Fe modifying sepiolite in Cr（VI）-containing wastewater treatment.展开更多
Methacrylic acid was used together with a molecular imprinting technique to modify chitosan. In addition, the adsorption kinetics and adsorption isotherms were recorded and the results were analyzed to investigate rep...Methacrylic acid was used together with a molecular imprinting technique to modify chitosan. In addition, the adsorption kinetics and adsorption isotherms were recorded and the results were analyzed to investigate reparative adsorption for Cr（VI） from the polluted Xiangjiang River water. A comparative X-ray analysis shows that the degree of crystallization in the imprinted polymer was significantly weakened, the area of the non-crystalline region was larger. There were more adsorption sites in the imprinted polymer, and the adsorption capacity towards Cr（VI） was increased. The adsorption capacity of the imprinted polymer towards Cr（VI） increased with time and reaches saturation after 8 h. The optimal adsorption time was 4-8 h after the adsorption starting and the optimal pH value for the solution was in the range of 4.5-7.5. When the chitosan reaches saturation, the adsorption capacity achieves a state of equilibrium, and the maximum Cr（VI） extraction rate reaches 33.7%. Moreover, the adsorption capacity of the imprinted polymer towards Cr（VI） increases with increasing chitosan concentration. In this situation, the Cr（VI） extraction rate shows little variation, and the maximum removal rate can reach 98.3%. Furthermore, the Cr（VI） extraction rate increases with an increase in the degree of deacetylation in the chatoyant and chitosan, with the best adsorption effect corresponding to 90% deacetylation. Fitting the adsorption data to the quasi first- and second-order kinetic models yields correlation coefficients of 0.9013 and 0.9875, respectively. The corresponding rate constants for the two models are 0.0091 min-1 and 7.129 g/（mg.min）, respectively. Hence, the adsorption using Cr（VI）-imprinted chitosan is more consistent with the second-order kinetics. Comparing the data to Freundlich and Langrnuir adsorption isotherms shows that the latter has a better linear fit and a maximum adsorption capacity of 15.784 mg/g.展开更多
基金supported by the National Natural Science Foundation of China (No.52364022)the Natural Science Foundation of Guangxi Province,China (Nos.2023JJA160192 and 2021GXNSFAA220096)+1 种基金the Guangxi Science and Technology Major Project,China (No.AA23073018)the Guangxi Chongzuo Science and Technology Plan,China (No.2023ZY00503).
文摘With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environments, thereby endangering human health. Therefore, in this paper, a novel functionalized mesoporous adsorbent PPR-Z was synthesized from waste amidoxime resin for adsorbing Cr(Ⅵ). The waste amidoxime resin was first modified with H3PO4 and ZnCl_(2), and subsequently, it was carbonized through slow thermal decomposition. The static adsorption of PPR-Z conforms to the pseudo-second-order kinetic model and Langmuir isotherm, indicating that the Cr(Ⅵ) adsorption by PPR-Z is mostly chemical adsorption and exhibits single-layer adsorption. The saturated adsorption capacity of the adsorbent for Cr(Ⅵ) could reach 255.86 mg/g. The adsorbent could effectively reduce Cr(Ⅵ) to Cr(Ⅲ) and decrease the toxicity of Cr(Ⅵ) during adsorption. PPR-Z exhibited Cr(Ⅵ) selectivity in electroplating wastewater. The main mechanisms involved in the Cr(Ⅵ) adsorption are the chemical reduction of Cr(Ⅵ) into Cr(Ⅲ) and electrostatic and coordination interactions. Preparation of PPR-Z not only solves the problem of waste resin treatment but also effectively controls Cr(Ⅵ) pollution and realizes the concept of “treating waste with waste”.
基金Supported by National Natural Science Foundation of China(51168013)National Key Technology Support Program(2014BAC04B03)~~
文摘A comparison between the effects of ordinary walnut shell and phosphoric acid modified walnut shell on adsorption of Cr（Ⅵ） was carried out. The experimental results showed that owing to larger surface void of modified walnut shell its adsorption of Cr（Ⅵ） was better. When the temperature was 35 ℃, adsorbent particle size was 1.0-1.6 mm, shaker shock rate was 200 r/min, and dosage of walnut shell was 0.80 g, the Cr（Ⅵ） removal rate reached 99.4%. The fitting of adsorption isotherm and kinetics model showed that, Langmuir isotherm model could reflect the adsorption process of modified walnut shell; and both the adsorption processes of ordinary and modified walnut shells accorded with the pseudo-second-order kinetic equations.
文摘It is observed that the adsorption of chromium are greater on kaolinite minerals, red soil (R) and laterite (L) colloids than that on montmorillonite, indicotic black (IB) and yellow brown (YB) soil colloids. The adsorption process of Cr Ⅵ on these media can be further described by Langmuir or Freundlich equation quite well. The adsorption reaction of Cr Ⅵ is fast, and the adsorption equilibrium can be reached within the first two hours in moderate temperature. The adsorption quantity of Cr Ⅵ to kaolinite mineral increased with the increasing pH in the range of 2.0 to 7.0, then decreased at higher pH. But it showed some consistence among the four soil colloids. The lower the pH, the stronger the adsorption. The possible mechanisms are further discussed here. Meanwhile the influence of temperature on Cr Ⅵ adsorption on different soil colloid and clay minerals are also investigated.
基金supported by Researchers Supporting Project number(RSP2023R455),King Saud University,Riyadh,Saudi Arabia。
文摘Herein,iron oxide/hydroxides deposits(gossans)were utilized,for the first time,in the fabrication of magnetite nanoparticles(MNPs)to load modified coal(MC).The as-synthesized MNPs@MC composite was characterized via different techniques and utilized for the Cr(Ⅵ)remediation.Experimental studies supported by theoretical treatment were applied to offer a new overview of the Cr(Ⅵ)adsorption geometry and mechanism at 25-45℃.Experimental results suggested that the Cr(Ⅵ)uptake was mainly governed by adsorption-reduction coupled mechanism.The Langmuir model fitted well the Cr(Ⅵ)adsorption data with maximum adsorption capacities extended from 115.24 to 129.63 mg·g^(-1).Theoretical calculations indicated that Cr(Ⅵ)ions were adsorbed on the MNPs@MC following the theory of the advanced monolayer statistical model.The number of ions removed per site ranged from 1.88 to1.23 suggesting the involvement of vertical geometry and multi-ionic mechanism at all temperatures.The increment of the active sites density and the adsorption capacity at saturation with improving temperature reflected an endothermic process.Energetically,the Cr(Ⅵ)adsorption was controlled by physical forces as the adsorption energies were less than 40 kJ·mol^(-1).The calculated free enthalpy,entropy.and internal energy explained the spontaneous nature and the viability of Cr(Ⅵ)adsorption on the MNPs@MC adsorbent.These results offer a new approach in utilizing the iron-rich deposits as gossans in the preparation of magnetic and low-cost adsorbents for wastewater remediation.
基金Projects(2006AA06Z374, 2007AA021304) supported by the National High-Tech Research and Development Program of ChinaProject(2008SK2007) supported by the Key Program of Science and Technology of Hunan Province, China
文摘Sugarcane pulp residue （SPR）, a waste from sugar-refinery, which possesses a large surface area, can be used for removing chromium （Cr（Ⅲ） and Cr（Ⅵ）） from wastewater. In this work, the kinetics, isotherms of Cr（Ⅲ） and Cr（V[） adsorption and their removal by SPR were investigated. The results show that the removal percentages of Cr（Ⅵ） and Cr（Ⅲ） increase with increasing SPR dosage and temperature and decrease with increasing SPR particle size and the initial concentration of chromium ions. However, the influence of pH value on the Cr（Ⅵ） removal differs from that of the Cr（Ⅲ） removal. The Cr（Ⅵ） removal percentage decreases with increasing pH values, while the Cr（Ⅲ） removal percentage increases with increasing pH value. The adsorption kinetics of Cr（Ⅵ） and Cr（Ⅲ） well fits with pseudo-second-order model. Langmuir adsorption isotherm can well describe the adsorption phenomena of chromium ions with the maximum adsorption capacity of 0.567 mg/g for Cr（Ⅵ） and 3.446 mg/g for Cr（Ⅲ）. Moreover, SPR reveals higher adsorption capacity for Cr（Ⅲ） than that for Cr（Ⅵ）, which implies that SPR has more potential application for Cr（Ⅲ）-containing wastewater treatment than that for Cr（Ⅵ）-containing wastewater treatment.
基金supported by the Research Grant of the Phytochemistry Key Laboratory of Shaanxi Province(Grant No.13JS005)the Project of Baoji University of Arts and Sciences(Grant No.YK1417)the Project of Baoji Sciences and Technology Bureau(Grant No.2013R7-5)
文摘Magnetic multi-wall carbon nanotubes were prepared with wet chemical treatments and characterized by a transmission electron microscope （TEM） and X-ray diffraction （XRD）. They were used as adsorbents for the removal of Cr（VI） in aqueous solutions. The effects of adsorbent dosage, the concentration of Cr（VI） in aqueous solution, temperature, and pH value on the removal efficiency were studied. Results showed that the adsorption capacity of the magnetic multi-wall carbon nanotubes increased with the initial Cr（VI） concentration, but decreased with the increase of adsorbent dosage. The adsorption amount increased with contact time. The adsorption kinetics were best represented by the pseudo second-order kinetic model, and the adsorption isotherms indicated that the Langmuir model better reflected the adsorption process. The ob- tained calculation results for the Gibbs free energy revealed that the adsorption was a spontaneous and endothermic process. The enthalpy deviation was 3.835 kJ.mol 1. The magnetic multi-wall carbon nanotubes showed significant potential for application in adsorption of heavy metal ions.
基金Project (Y304121) supported by the Natural Science Foundation of Zhejiang Province,China
文摘The adsorption capability of D318 resin for Cr（Ⅵ） was investigated by chemistry analysis. Experimental results show that D318 resin has the best adsorption ability for Cr（Ⅵ） at pH=3.16 in HAc-NaAc medium. The statically saturated adsorption capacity of the resin is 265.4 mg/g. The thermodynamic adsorption parameters, enthalpy change AH and free energy change AG298 of the adsorption reaction are 4.81 and -5.16 kJ/mol, respectively. The apparent activation energy Ea is 22.4 kJ/mol. The adsorption behavior obeys the Freundlich isotherm. The molar coordination ratio of the functional group of resin to Cr（Ⅵ） is 3：2. Cr（Ⅵ） adsorbed on D318 resin can be eluted by 5%NaOH-5%NaCl quantitatively.
基金Project(20040501) supported by the Department of Education of Zhejiang Province, ChinaProject(2004465) supported by the Bureau of Science and Technology of Lishui City, China
文摘The adsorption properties of XSD-296 for Cr(Ⅵ) were studied by using chemical analysis and infrared spectrometry. Experimental results show that XSD-296 resin has a good adsorption ability for Cr(Ⅵ) at pH=2.6 in the HAc-NaAc medium. The statically saturated adsorption capacity is 235 mg/g resin. The apparent activation energy of adsorption reaction, Ea, is 16.73 kJ/mol, and the thermodynamic parameters are △H=11.62 kJ/mol, △G298 K=-4.13 kJ/mol. The adsorption behavior of resin for Cr(Ⅵ) is in accordance with Freundlich adsorption isotherm. Cr( Ⅵ ) adsorbed on resin can be eluted by 5%NaCl-5%NaOH or 5%NH4Cl-5%NH3·H2O quantitatively. Infrared spectra and adsorption mechanism show that the functional group of resin coordinates with Cr(Ⅵ) to form co-ordination compound. The coordination molar ratio of the functional group of resin to Cr(Ⅵ) is 1:1.
基金National Natural Science Foundation of China(No.21276151)the National High Technology Research and Development Program of China(No.2011AA06A108)+1 种基金Key Scientific Research Group of Shaanxi Province,China(No.2013KCT-08)Postgraduate Innovation Project Funding of Shaanxi University of Science and Technology,China(No.2014019)
文摘In this study, a novel adsorption material amino terminated hyperbranched polyamide collagen fiber( CF-HBPN)was prepared by loading amino terminated hyperbranched polyamide( HBPN) which was synthesized by polycondensation of methacrylate and diethylenetriamine onto the surface of collagen fiber( CF) with glutaraldehyde as the cross-linking agent. X-ray photoelectron spectroscopy( XPS) and thermogravimetric analysis( TGA) were employed to characterize the structures of CF and CFHBPN. In addition,the adsorption property of CF-HBPN toward Cr( Ⅵ) and adsorption thermodynamic were studied as well. The experimental results indicated that the Cr( Ⅵ) 's removal rate by CF-HBPN was 3. 09 higher than that of CF under the same conditions. Langmuir single layer adsorption model was found more suitable to describe the adsorption process than Freundlich adsorption model. The adsorption process was an endothermic reaction. The adsorption efficiency was enhanced with the increase of temperature. X-ray diffraction( XRD) was employed to elucidate the difference between CF-HBPN and Cr( Ⅵ) loaded CF-HBPN[CF-HBPN-Cr( Ⅵ) ].
文摘The advantage of using an available and abundant residual biomass, such as lignin, as a raw material for activated carbons is that it provides additional economical interest to the technical studies. In the current investigation, a more complete understanding of adsorption of Cr（VI） from aqueous systems onto HaPO4-acid activated lignin has been achieved via microcolumns, which were operated under various process conditions. The practice of using microcolumn is appropriate for defining the adsorption parameters and for screening a large number of poten- tial adsorbents. The effects of solution pH （2-8）, initial metal ion concentration （0.483-1.981 mmol.L-1）, flow rate （1.0-3.1 cm3-min-1）, ionic strength （0.01-0.30 mmol-L-1） and adsorbent mass （0.11 0.465 g） on Cr（VI） adsorption were studied by assessing the microcolmnn breakthrough curve. The microcolumn data were fitted by the Thomas model, the modified Dose model and the BDST model. As expected, the adsorption capacity increased with initial Cr（VI） concentration. High linear flow rates, pH values and ionic strength led to early breakthrough of Cr（VI）. The model constants obtained in this study can be used for the design of pilot scale adsorption process.
文摘[ Objective] The research aimed to study the adsorption capability of Fe modifying sepiolite on Cr（Vl）. [ Method] FeCl3 solution with different concentrations was used to modify sepiolite. By static adsorption experiment, the adsorption capability of Fe modifying sepiolite on Cr（VI ） was studied. [Result] Under the condition of initial Cr（VI） concentration of 90 mg/L, 10.0% IMS dosage of 5 g/L, pH of 4.5, adsorption time of 90 min, and temperature of 25 ℃ the equilibrium adsorption quantity of Fe modifying sepiolite was 6.5 mg/g. [Conclusion] The research provided an effective pathway for the application of Fe modifying sepiolite in Cr（VI）-containing wastewater treatment.
基金Project(41271332)supported by the National Natural Science Foundation of ChinaProject(2010YBB186)supported by the Social Science Foundation of Hunan Province,Chian
文摘Methacrylic acid was used together with a molecular imprinting technique to modify chitosan. In addition, the adsorption kinetics and adsorption isotherms were recorded and the results were analyzed to investigate reparative adsorption for Cr（VI） from the polluted Xiangjiang River water. A comparative X-ray analysis shows that the degree of crystallization in the imprinted polymer was significantly weakened, the area of the non-crystalline region was larger. There were more adsorption sites in the imprinted polymer, and the adsorption capacity towards Cr（VI） was increased. The adsorption capacity of the imprinted polymer towards Cr（VI） increased with time and reaches saturation after 8 h. The optimal adsorption time was 4-8 h after the adsorption starting and the optimal pH value for the solution was in the range of 4.5-7.5. When the chitosan reaches saturation, the adsorption capacity achieves a state of equilibrium, and the maximum Cr（VI） extraction rate reaches 33.7%. Moreover, the adsorption capacity of the imprinted polymer towards Cr（VI） increases with increasing chitosan concentration. In this situation, the Cr（VI） extraction rate shows little variation, and the maximum removal rate can reach 98.3%. Furthermore, the Cr（VI） extraction rate increases with an increase in the degree of deacetylation in the chatoyant and chitosan, with the best adsorption effect corresponding to 90% deacetylation. Fitting the adsorption data to the quasi first- and second-order kinetic models yields correlation coefficients of 0.9013 and 0.9875, respectively. The corresponding rate constants for the two models are 0.0091 min-1 and 7.129 g/（mg.min）, respectively. Hence, the adsorption using Cr（VI）-imprinted chitosan is more consistent with the second-order kinetics. Comparing the data to Freundlich and Langrnuir adsorption isotherms shows that the latter has a better linear fit and a maximum adsorption capacity of 15.784 mg/g.
