Herein,iron oxide/hydroxides deposits(gossans)were utilized,for the first time,in the fabrication of magnetite nanoparticles(MNPs)to load modified coal(MC).The as-synthesized MNPs@MC composite was characterized via di...Herein,iron oxide/hydroxides deposits(gossans)were utilized,for the first time,in the fabrication of magnetite nanoparticles(MNPs)to load modified coal(MC).The as-synthesized MNPs@MC composite was characterized via different techniques and utilized for the Cr(Ⅵ)remediation.Experimental studies supported by theoretical treatment were applied to offer a new overview of the Cr(Ⅵ)adsorption geometry and mechanism at 25-45℃.Experimental results suggested that the Cr(Ⅵ)uptake was mainly governed by adsorption-reduction coupled mechanism.The Langmuir model fitted well the Cr(Ⅵ)adsorption data with maximum adsorption capacities extended from 115.24 to 129.63 mg·g^(-1).Theoretical calculations indicated that Cr(Ⅵ)ions were adsorbed on the MNPs@MC following the theory of the advanced monolayer statistical model.The number of ions removed per site ranged from 1.88 to1.23 suggesting the involvement of vertical geometry and multi-ionic mechanism at all temperatures.The increment of the active sites density and the adsorption capacity at saturation with improving temperature reflected an endothermic process.Energetically,the Cr(Ⅵ)adsorption was controlled by physical forces as the adsorption energies were less than 40 kJ·mol^(-1).The calculated free enthalpy,entropy.and internal energy explained the spontaneous nature and the viability of Cr(Ⅵ)adsorption on the MNPs@MC adsorbent.These results offer a new approach in utilizing the iron-rich deposits as gossans in the preparation of magnetic and low-cost adsorbents for wastewater remediation.展开更多
A comparison between the effects of ordinary walnut shell and phosphoric acid modified walnut shell on adsorption of Cr（Ⅵ） was carried out. The experimental results showed that owing to larger surface void of modif...A comparison between the effects of ordinary walnut shell and phosphoric acid modified walnut shell on adsorption of Cr（Ⅵ） was carried out. The experimental results showed that owing to larger surface void of modified walnut shell its adsorption of Cr（Ⅵ） was better. When the temperature was 35 ℃, adsorbent particle size was 1.0-1.6 mm, shaker shock rate was 200 r/min, and dosage of walnut shell was 0.80 g, the Cr（Ⅵ） removal rate reached 99.4%. The fitting of adsorption isotherm and kinetics model showed that, Langmuir isotherm model could reflect the adsorption process of modified walnut shell; and both the adsorption processes of ordinary and modified walnut shells accorded with the pseudo-second-order kinetic equations.展开更多
It is observed that the adsorption of chromium are greater on kaolinite minerals, red soil (R) and laterite (L) colloids than that on montmorillonite, indicotic black (IB) and yellow brown (YB) soil colloids. The adso...It is observed that the adsorption of chromium are greater on kaolinite minerals, red soil (R) and laterite (L) colloids than that on montmorillonite, indicotic black (IB) and yellow brown (YB) soil colloids. The adsorption process of Cr Ⅵ on these media can be further described by Langmuir or Freundlich equation quite well. The adsorption reaction of Cr Ⅵ is fast, and the adsorption equilibrium can be reached within the first two hours in moderate temperature. The adsorption quantity of Cr Ⅵ to kaolinite mineral increased with the increasing pH in the range of 2.0 to 7.0, then decreased at higher pH. But it showed some consistence among the four soil colloids. The lower the pH, the stronger the adsorption. The possible mechanisms are further discussed here. Meanwhile the influence of temperature on Cr Ⅵ adsorption on different soil colloid and clay minerals are also investigated.展开更多
Sugarcane pulp residue （SPR）, a waste from sugar-refinery, which possesses a large surface area, can be used for removing chromium （Cr（Ⅲ） and Cr（Ⅵ）） from wastewater. In this work, the kinetics, isotherms of...Sugarcane pulp residue （SPR）, a waste from sugar-refinery, which possesses a large surface area, can be used for removing chromium （Cr（Ⅲ） and Cr（Ⅵ）） from wastewater. In this work, the kinetics, isotherms of Cr（Ⅲ） and Cr（V[） adsorption and their removal by SPR were investigated. The results show that the removal percentages of Cr（Ⅵ） and Cr（Ⅲ） increase with increasing SPR dosage and temperature and decrease with increasing SPR particle size and the initial concentration of chromium ions. However, the influence of pH value on the Cr（Ⅵ） removal differs from that of the Cr（Ⅲ） removal. The Cr（Ⅵ） removal percentage decreases with increasing pH values, while the Cr（Ⅲ） removal percentage increases with increasing pH value. The adsorption kinetics of Cr（Ⅵ） and Cr（Ⅲ） well fits with pseudo-second-order model. Langmuir adsorption isotherm can well describe the adsorption phenomena of chromium ions with the maximum adsorption capacity of 0.567 mg/g for Cr（Ⅵ） and 3.446 mg/g for Cr（Ⅲ）. Moreover, SPR reveals higher adsorption capacity for Cr（Ⅲ） than that for Cr（Ⅵ）, which implies that SPR has more potential application for Cr（Ⅲ）-containing wastewater treatment than that for Cr（Ⅵ）-containing wastewater treatment.展开更多
The adsorption capability of D318 resin for Cr（Ⅵ） was investigated by chemistry analysis. Experimental results show that D318 resin has the best adsorption ability for Cr（Ⅵ） at pH=3.16 in HAc-NaAc medium. The st...The adsorption capability of D318 resin for Cr（Ⅵ） was investigated by chemistry analysis. Experimental results show that D318 resin has the best adsorption ability for Cr（Ⅵ） at pH=3.16 in HAc-NaAc medium. The statically saturated adsorption capacity of the resin is 265.4 mg/g. The thermodynamic adsorption parameters, enthalpy change AH and free energy change AG298 of the adsorption reaction are 4.81 and -5.16 kJ/mol, respectively. The apparent activation energy Ea is 22.4 kJ/mol. The adsorption behavior obeys the Freundlich isotherm. The molar coordination ratio of the functional group of resin to Cr（Ⅵ） is 3：2. Cr（Ⅵ） adsorbed on D318 resin can be eluted by 5%NaOH-5%NaCl quantitatively.展开更多
In this study, a novel adsorption material amino terminated hyperbranched polyamide collagen fiber( CF-HBPN)was prepared by loading amino terminated hyperbranched polyamide( HBPN) which was synthesized by polycondensa...In this study, a novel adsorption material amino terminated hyperbranched polyamide collagen fiber( CF-HBPN)was prepared by loading amino terminated hyperbranched polyamide( HBPN) which was synthesized by polycondensation of methacrylate and diethylenetriamine onto the surface of collagen fiber( CF) with glutaraldehyde as the cross-linking agent. X-ray photoelectron spectroscopy( XPS) and thermogravimetric analysis( TGA) were employed to characterize the structures of CF and CFHBPN. In addition,the adsorption property of CF-HBPN toward Cr( Ⅵ) and adsorption thermodynamic were studied as well. The experimental results indicated that the Cr( Ⅵ) 's removal rate by CF-HBPN was 3. 09 higher than that of CF under the same conditions. Langmuir single layer adsorption model was found more suitable to describe the adsorption process than Freundlich adsorption model. The adsorption process was an endothermic reaction. The adsorption efficiency was enhanced with the increase of temperature. X-ray diffraction( XRD) was employed to elucidate the difference between CF-HBPN and Cr( Ⅵ) loaded CF-HBPN[CF-HBPN-Cr( Ⅵ) ].展开更多
基金supported by Researchers Supporting Project number(RSP2023R455),King Saud University,Riyadh,Saudi Arabia。
文摘Herein,iron oxide/hydroxides deposits(gossans)were utilized,for the first time,in the fabrication of magnetite nanoparticles(MNPs)to load modified coal(MC).The as-synthesized MNPs@MC composite was characterized via different techniques and utilized for the Cr(Ⅵ)remediation.Experimental studies supported by theoretical treatment were applied to offer a new overview of the Cr(Ⅵ)adsorption geometry and mechanism at 25-45℃.Experimental results suggested that the Cr(Ⅵ)uptake was mainly governed by adsorption-reduction coupled mechanism.The Langmuir model fitted well the Cr(Ⅵ)adsorption data with maximum adsorption capacities extended from 115.24 to 129.63 mg·g^(-1).Theoretical calculations indicated that Cr(Ⅵ)ions were adsorbed on the MNPs@MC following the theory of the advanced monolayer statistical model.The number of ions removed per site ranged from 1.88 to1.23 suggesting the involvement of vertical geometry and multi-ionic mechanism at all temperatures.The increment of the active sites density and the adsorption capacity at saturation with improving temperature reflected an endothermic process.Energetically,the Cr(Ⅵ)adsorption was controlled by physical forces as the adsorption energies were less than 40 kJ·mol^(-1).The calculated free enthalpy,entropy.and internal energy explained the spontaneous nature and the viability of Cr(Ⅵ)adsorption on the MNPs@MC adsorbent.These results offer a new approach in utilizing the iron-rich deposits as gossans in the preparation of magnetic and low-cost adsorbents for wastewater remediation.
基金Supported by National Natural Science Foundation of China(51168013)National Key Technology Support Program(2014BAC04B03)~~
文摘A comparison between the effects of ordinary walnut shell and phosphoric acid modified walnut shell on adsorption of Cr（Ⅵ） was carried out. The experimental results showed that owing to larger surface void of modified walnut shell its adsorption of Cr（Ⅵ） was better. When the temperature was 35 ℃, adsorbent particle size was 1.0-1.6 mm, shaker shock rate was 200 r/min, and dosage of walnut shell was 0.80 g, the Cr（Ⅵ） removal rate reached 99.4%. The fitting of adsorption isotherm and kinetics model showed that, Langmuir isotherm model could reflect the adsorption process of modified walnut shell; and both the adsorption processes of ordinary and modified walnut shells accorded with the pseudo-second-order kinetic equations.
文摘It is observed that the adsorption of chromium are greater on kaolinite minerals, red soil (R) and laterite (L) colloids than that on montmorillonite, indicotic black (IB) and yellow brown (YB) soil colloids. The adsorption process of Cr Ⅵ on these media can be further described by Langmuir or Freundlich equation quite well. The adsorption reaction of Cr Ⅵ is fast, and the adsorption equilibrium can be reached within the first two hours in moderate temperature. The adsorption quantity of Cr Ⅵ to kaolinite mineral increased with the increasing pH in the range of 2.0 to 7.0, then decreased at higher pH. But it showed some consistence among the four soil colloids. The lower the pH, the stronger the adsorption. The possible mechanisms are further discussed here. Meanwhile the influence of temperature on Cr Ⅵ adsorption on different soil colloid and clay minerals are also investigated.
基金Projects(2006AA06Z374, 2007AA021304) supported by the National High-Tech Research and Development Program of ChinaProject(2008SK2007) supported by the Key Program of Science and Technology of Hunan Province, China
文摘Sugarcane pulp residue （SPR）, a waste from sugar-refinery, which possesses a large surface area, can be used for removing chromium （Cr（Ⅲ） and Cr（Ⅵ）） from wastewater. In this work, the kinetics, isotherms of Cr（Ⅲ） and Cr（V[） adsorption and their removal by SPR were investigated. The results show that the removal percentages of Cr（Ⅵ） and Cr（Ⅲ） increase with increasing SPR dosage and temperature and decrease with increasing SPR particle size and the initial concentration of chromium ions. However, the influence of pH value on the Cr（Ⅵ） removal differs from that of the Cr（Ⅲ） removal. The Cr（Ⅵ） removal percentage decreases with increasing pH values, while the Cr（Ⅲ） removal percentage increases with increasing pH value. The adsorption kinetics of Cr（Ⅵ） and Cr（Ⅲ） well fits with pseudo-second-order model. Langmuir adsorption isotherm can well describe the adsorption phenomena of chromium ions with the maximum adsorption capacity of 0.567 mg/g for Cr（Ⅵ） and 3.446 mg/g for Cr（Ⅲ）. Moreover, SPR reveals higher adsorption capacity for Cr（Ⅲ） than that for Cr（Ⅵ）, which implies that SPR has more potential application for Cr（Ⅲ）-containing wastewater treatment than that for Cr（Ⅵ）-containing wastewater treatment.
基金Project (Y304121) supported by the Natural Science Foundation of Zhejiang Province,China
文摘The adsorption capability of D318 resin for Cr（Ⅵ） was investigated by chemistry analysis. Experimental results show that D318 resin has the best adsorption ability for Cr（Ⅵ） at pH=3.16 in HAc-NaAc medium. The statically saturated adsorption capacity of the resin is 265.4 mg/g. The thermodynamic adsorption parameters, enthalpy change AH and free energy change AG298 of the adsorption reaction are 4.81 and -5.16 kJ/mol, respectively. The apparent activation energy Ea is 22.4 kJ/mol. The adsorption behavior obeys the Freundlich isotherm. The molar coordination ratio of the functional group of resin to Cr（Ⅵ） is 3：2. Cr（Ⅵ） adsorbed on D318 resin can be eluted by 5%NaOH-5%NaCl quantitatively.
基金National Natural Science Foundation of China(No.21276151)the National High Technology Research and Development Program of China(No.2011AA06A108)+1 种基金Key Scientific Research Group of Shaanxi Province,China(No.2013KCT-08)Postgraduate Innovation Project Funding of Shaanxi University of Science and Technology,China(No.2014019)
文摘In this study, a novel adsorption material amino terminated hyperbranched polyamide collagen fiber( CF-HBPN)was prepared by loading amino terminated hyperbranched polyamide( HBPN) which was synthesized by polycondensation of methacrylate and diethylenetriamine onto the surface of collagen fiber( CF) with glutaraldehyde as the cross-linking agent. X-ray photoelectron spectroscopy( XPS) and thermogravimetric analysis( TGA) were employed to characterize the structures of CF and CFHBPN. In addition,the adsorption property of CF-HBPN toward Cr( Ⅵ) and adsorption thermodynamic were studied as well. The experimental results indicated that the Cr( Ⅵ) 's removal rate by CF-HBPN was 3. 09 higher than that of CF under the same conditions. Langmuir single layer adsorption model was found more suitable to describe the adsorption process than Freundlich adsorption model. The adsorption process was an endothermic reaction. The adsorption efficiency was enhanced with the increase of temperature. X-ray diffraction( XRD) was employed to elucidate the difference between CF-HBPN and Cr( Ⅵ) loaded CF-HBPN[CF-HBPN-Cr( Ⅵ) ].
