The effects of alloying elements in welding wires and submerged arc welding process on the microstructures and low-temperature impact toughness of weld metals have been investigated. The results indicate that the opti...The effects of alloying elements in welding wires and submerged arc welding process on the microstructures and low-temperature impact toughness of weld metals have been investigated. The results indicate that the optimal contents of alloying elements in welding wires can improve the low-temperature impact toughness of weld metals because the proeutectoid ferrite and bainite formations can be suppressed, and the fraction of acicular ferrite increases. However, the contents of alloying elements need to vary along with the welding heat input. With the increase in welding heat input, the contents of alloying elements in welding wires need to be increased accordingly. The microstructures mainly consisting of acicular ferrite can be obtained in weld metals after four-wire submerged arc welding using the wires with a low carbon content and appropriate contents of Mn, Mo, Ti-B, Cu, Ni, and RE, resulting in the high low-temperature impact toughness of weld metals.展开更多
Fused ternary CaF_(2)–SiO_(2)–MnO fluxes have been manufactured and applied to join EH36 shipbuilding steel under high heat input submerged arc welding.Five fluxes have been designed to clarify the effect of MnO con...Fused ternary CaF_(2)–SiO_(2)–MnO fluxes have been manufactured and applied to join EH36 shipbuilding steel under high heat input submerged arc welding.Five fluxes have been designed to clarify the effect of MnO content in CaF_(2)–SiO_(2)–MnO flux on the impact toughness of the weld metal,with the added amount of MnO from 10 to 50 wt.%at the expense of CaF_(2).With the increase in MnO content,the Charpy impact energy increases first and then decreases,experiencing a maximum value at 30 wt.%MnO.Microstructure of the weld metals has also been studied to account for impact toughness variations.It has been demonstrated that the highest acicular ferrite volume fraction in the weld metal is achieved at 30 wt.%MnO,which is concurrent to the maximum value of Charpy impact energy.It is believed that the Mn and O content variations in the weld metal contribute synergistically to such an interesting phenomenon.展开更多
Microstructural characteristics of different sub-regions of heat affected zone (HAZ) of low welding crack susceptibility steel weldment were investigated by using optical microscopy and scanning electron microscopy ...Microstructural characteristics of different sub-regions of heat affected zone (HAZ) of low welding crack susceptibility steel weldment were investigated by using optical microscopy and scanning electron microscopy equipped with electron backscattered diffraction system. And the focus was put on the correlation between microstructural characteristics and HAZ toughness of the weldment. The results reveal that the toughness of fusion line zone (FLZ) specimens is much lower than that of fine grained HAZ (FGHAZ) specimens. The coarse inclusions in the weld metal and the large martensite-austenite constituents in the coarse grained HAZ (CGHAZ) have an obvious negative effect on the crack initiation energy of FLZ. Meanwhile, the coarse granular bainite with large effective grain decreases the crack propagation energy seriously. By contrast, fine crystallographic grains in the FGHAZ play a key role in increasing toughness, especially in improving crack propagation energy.展开更多
利用金相显微镜、冲击试验等研究了Nb、Ti微合金元素对连铸10MnNiCr钢埋弧焊焊接接头组织与韧性的影响。结果表明,Nb V Ti钢的焊缝和焊接热影响区比Nb V钢的具有更高的冲击韧性。其中Nb元素易促进侧板条铁素体形成,对韧性不利;Ti元素易...利用金相显微镜、冲击试验等研究了Nb、Ti微合金元素对连铸10MnNiCr钢埋弧焊焊接接头组织与韧性的影响。结果表明,Nb V Ti钢的焊缝和焊接热影响区比Nb V钢的具有更高的冲击韧性。其中Nb元素易促进侧板条铁素体形成,对韧性不利;Ti元素易使焊缝金属产生针状铁素体,并抑制CG HAZ晶粒粗化,对改善埋弧焊接头韧性有显著作用。展开更多
基金supported by the Research and Development Project of Science and Technology of Hebei Province, China (No.03212211D and No.002121186D)
文摘The effects of alloying elements in welding wires and submerged arc welding process on the microstructures and low-temperature impact toughness of weld metals have been investigated. The results indicate that the optimal contents of alloying elements in welding wires can improve the low-temperature impact toughness of weld metals because the proeutectoid ferrite and bainite formations can be suppressed, and the fraction of acicular ferrite increases. However, the contents of alloying elements need to vary along with the welding heat input. With the increase in welding heat input, the contents of alloying elements in welding wires need to be increased accordingly. The microstructures mainly consisting of acicular ferrite can be obtained in weld metals after four-wire submerged arc welding using the wires with a low carbon content and appropriate contents of Mn, Mo, Ti-B, Cu, Ni, and RE, resulting in the high low-temperature impact toughness of weld metals.
基金The authors sincerely thank the State Key Laboratory of Refractories and Metallurgy(Grant No.G202206)National Natural Science Foundation of China(Grant Nos.U20A20277 and 52150610494)National Key Research and Development Program of China(Grant No.2022YFE0123300).
文摘Fused ternary CaF_(2)–SiO_(2)–MnO fluxes have been manufactured and applied to join EH36 shipbuilding steel under high heat input submerged arc welding.Five fluxes have been designed to clarify the effect of MnO content in CaF_(2)–SiO_(2)–MnO flux on the impact toughness of the weld metal,with the added amount of MnO from 10 to 50 wt.%at the expense of CaF_(2).With the increase in MnO content,the Charpy impact energy increases first and then decreases,experiencing a maximum value at 30 wt.%MnO.Microstructure of the weld metals has also been studied to account for impact toughness variations.It has been demonstrated that the highest acicular ferrite volume fraction in the weld metal is achieved at 30 wt.%MnO,which is concurrent to the maximum value of Charpy impact energy.It is believed that the Mn and O content variations in the weld metal contribute synergistically to such an interesting phenomenon.
基金supported by the National Natural Science Foundation of China (No. 51074052)the Fundamental Research Funds for the Central Universities(No. N100607001)
文摘Microstructural characteristics of different sub-regions of heat affected zone (HAZ) of low welding crack susceptibility steel weldment were investigated by using optical microscopy and scanning electron microscopy equipped with electron backscattered diffraction system. And the focus was put on the correlation between microstructural characteristics and HAZ toughness of the weldment. The results reveal that the toughness of fusion line zone (FLZ) specimens is much lower than that of fine grained HAZ (FGHAZ) specimens. The coarse inclusions in the weld metal and the large martensite-austenite constituents in the coarse grained HAZ (CGHAZ) have an obvious negative effect on the crack initiation energy of FLZ. Meanwhile, the coarse granular bainite with large effective grain decreases the crack propagation energy seriously. By contrast, fine crystallographic grains in the FGHAZ play a key role in increasing toughness, especially in improving crack propagation energy.
文摘利用金相显微镜、冲击试验等研究了Nb、Ti微合金元素对连铸10MnNiCr钢埋弧焊焊接接头组织与韧性的影响。结果表明,Nb V Ti钢的焊缝和焊接热影响区比Nb V钢的具有更高的冲击韧性。其中Nb元素易促进侧板条铁素体形成,对韧性不利;Ti元素易使焊缝金属产生针状铁素体,并抑制CG HAZ晶粒粗化,对改善埋弧焊接头韧性有显著作用。