Through the establishment of the negotiation model ofa single-wheelset, the changed curve of the wheel-rail lateral contact characteristic under different working conditions of track media was simulated and analyzed.T...Through the establishment of the negotiation model ofa single-wheelset, the changed curve of the wheel-rail lateral contact characteristic under different working conditions of track media was simulated and analyzed.The elastic mode of the wheel pair, the transverse elasticity of the track, the stick-slip vibration between the wheel and the track, the negative gradient characteristic of the actual creep force characteristic curve, and the right shift characteristic of the saturation point are considered by Simulink model.This can explain many kinds of creep theory and engineering phenomena and also can provide the support of the theoretical and practical for further research based on creep characteristic curve.展开更多
Constant load creep tests on isothermally forged Udimet 720Li, an advanced superalloy for gas turbine disc application, were run in the stress/temperature field 900-450MPa/650-700 ℃ producing rupture times in the 20-...Constant load creep tests on isothermally forged Udimet 720Li, an advanced superalloy for gas turbine disc application, were run in the stress/temperature field 900-450MPa/650-700 ℃ producing rupture times in the 20-5000h range. The creep curves have shown a predominant accelerating creep stage, that has been described by the following equation: where ε min depends on stress and temperature, while parameter C depends mainly on stress. A strain dependent damage, defined by the parameter C, causes the accelerating creep stage at stresses lower than 750MPa, whilst its contribution to the creep strain acceleration is less important at higher stresses. The model rationalizes the different behaviors at high and low stress and has been validated with variable stress and temperature creep behavior.展开更多
Materials and Testing, Shanghai Jiao Tong University, Shanghai 200030, China The threestage creep behavior of DD3 single crystal superalloy had been studied. The results show that the creeprupture properties of DD3...Materials and Testing, Shanghai Jiao Tong University, Shanghai 200030, China The threestage creep behavior of DD3 single crystal superalloy had been studied. The results show that the creeprupture properties of DD3 single crystal satisfy the requirements for high performance turbine blade application. The influence of crystal orientation on the creeprupture property of DD3 single crystal was tested and discussed. An engineering criterion to evaluate the regimes of secondary and tertiary creep is proposed, and this method gives a reasonable result for practical applications. The fractography and TEM micrography of the tested specimens had been studied, and it is determined that the glidecontrolled creep is the basic creep mechanism of DD3 single crystal at intermediate temperature, but the thermally activated processes become dominant at higher temperature.展开更多
The creep equation proposed in so called θ projection concept is developed in the concept of thermal activation of creep. The measured creep curves of A286 alloy are fitted by the equation. The activation energy in t...The creep equation proposed in so called θ projection concept is developed in the concept of thermal activation of creep. The measured creep curves of A286 alloy are fitted by the equation. The activation energy in theequation is evaluated, and creep rupture lives are predicted. The results are confirmed by creep tests of up to 13years.展开更多
According to earthquake data of Fushun earthquake administration,the seismic analysis and statistical methods are utilized in order to analyze earthquake frequency,"b"-value timing and energy creep trends in...According to earthquake data of Fushun earthquake administration,the seismic analysis and statistical methods are utilized in order to analyze earthquake frequency,"b"-value timing and energy creep trends in Laohutai coal mine. By using least squares linear regression method,the relational expression between frequency and magnitude of mine earthquake in Laohutai coal mine is given. And the possible largest magnitude mine earthquake inferred has also been calculated. And this paper also provides a theoretical basis for further study of mine earthquake activity.展开更多
This paper reports an improved constitutive model for the shear creep behavior of offwhite marbles which are selected from slope and underground cavern and contain green schist’s weak structural planes.The shear cree...This paper reports an improved constitutive model for the shear creep behavior of offwhite marbles which are selected from slope and underground cavern and contain green schist’s weak structural planes.The shear creep behavior of the samples is characterized using the rheological tests.Based on the experimental measurements on mechanical properties under different normal stress conditions,an improved model is proposed to analyze the experimental results.It is demonstrated from a further discussion that such model can reflect the non-linear creep characteristics of structural planes,and especially,it is suitable for description of the viscoelastic and viscoplastic deformation behavior of structural planes.展开更多
文摘Through the establishment of the negotiation model ofa single-wheelset, the changed curve of the wheel-rail lateral contact characteristic under different working conditions of track media was simulated and analyzed.The elastic mode of the wheel pair, the transverse elasticity of the track, the stick-slip vibration between the wheel and the track, the negative gradient characteristic of the actual creep force characteristic curve, and the right shift characteristic of the saturation point are considered by Simulink model.This can explain many kinds of creep theory and engineering phenomena and also can provide the support of the theoretical and practical for further research based on creep characteristic curve.
文摘Constant load creep tests on isothermally forged Udimet 720Li, an advanced superalloy for gas turbine disc application, were run in the stress/temperature field 900-450MPa/650-700 ℃ producing rupture times in the 20-5000h range. The creep curves have shown a predominant accelerating creep stage, that has been described by the following equation: where ε min depends on stress and temperature, while parameter C depends mainly on stress. A strain dependent damage, defined by the parameter C, causes the accelerating creep stage at stresses lower than 750MPa, whilst its contribution to the creep strain acceleration is less important at higher stresses. The model rationalizes the different behaviors at high and low stress and has been validated with variable stress and temperature creep behavior.
文摘Materials and Testing, Shanghai Jiao Tong University, Shanghai 200030, China The threestage creep behavior of DD3 single crystal superalloy had been studied. The results show that the creeprupture properties of DD3 single crystal satisfy the requirements for high performance turbine blade application. The influence of crystal orientation on the creeprupture property of DD3 single crystal was tested and discussed. An engineering criterion to evaluate the regimes of secondary and tertiary creep is proposed, and this method gives a reasonable result for practical applications. The fractography and TEM micrography of the tested specimens had been studied, and it is determined that the glidecontrolled creep is the basic creep mechanism of DD3 single crystal at intermediate temperature, but the thermally activated processes become dominant at higher temperature.
文摘The creep equation proposed in so called θ projection concept is developed in the concept of thermal activation of creep. The measured creep curves of A286 alloy are fitted by the equation. The activation energy in theequation is evaluated, and creep rupture lives are predicted. The results are confirmed by creep tests of up to 13years.
文摘According to earthquake data of Fushun earthquake administration,the seismic analysis and statistical methods are utilized in order to analyze earthquake frequency,"b"-value timing and energy creep trends in Laohutai coal mine. By using least squares linear regression method,the relational expression between frequency and magnitude of mine earthquake in Laohutai coal mine is given. And the possible largest magnitude mine earthquake inferred has also been calculated. And this paper also provides a theoretical basis for further study of mine earthquake activity.
文摘This paper reports an improved constitutive model for the shear creep behavior of offwhite marbles which are selected from slope and underground cavern and contain green schist’s weak structural planes.The shear creep behavior of the samples is characterized using the rheological tests.Based on the experimental measurements on mechanical properties under different normal stress conditions,an improved model is proposed to analyze the experimental results.It is demonstrated from a further discussion that such model can reflect the non-linear creep characteristics of structural planes,and especially,it is suitable for description of the viscoelastic and viscoplastic deformation behavior of structural planes.
