On the basis of the canard configuration a contour stealth design including chiefly the wing, the fuselage and their connection type is projected. The prime project of a blended wing body vehicle with canard is provid...On the basis of the canard configuration a contour stealth design including chiefly the wing, the fuselage and their connection type is projected. The prime project of a blended wing body vehicle with canard is provided and through the change of the fuselage head form and the different fin disposals, the radar cross section (RCS) is optimized. The average value of RCS and the value of RCS in the ± 45 ° front sector for different designs are illustrated. The model measurement proves that the project having a sharp head fuselage and 30 ° angle double fin has the minimum value of RCS. The wind tunnel test to the model with RCS optimized proved that the vehicle project has excellent aerodynamic characteristics such as high lift curve slope, up to 26° stalling angle, high lift / drag ratio equal to 8, and also has low RCS value in the front sector and in the lateral sector.展开更多
This article proposes use of extruded compound materials with optimized resistant cross-sections as an alternative, in this case, seeking the maximum energy density as a design criterion. The advantage of this proposa...This article proposes use of extruded compound materials with optimized resistant cross-sections as an alternative, in this case, seeking the maximum energy density as a design criterion. The advantage of this proposal is that it extends the life cycle and decreases fatigue issues.展开更多
An external carriage and a wing have a high radar cross section (RCS) level in a wide range of angles of pitch because they form an efficient corner reflector. Coupling scattering between the external carriage and the...An external carriage and a wing have a high radar cross section (RCS) level in a wide range of angles of pitch because they form an efficient corner reflector. Coupling scattering between the external carriage and the wing is controlled by designing a saw tooth structure of the external carriage on condition that the wing structure is not changed. A low RCS saw tooth scheme of the external carriage is given in the paper. The ray tracing method and the physical theory of diffraction are used to calculate the radar scattering characteristics of low RCS structures of the external carriage and wing. The results show that the saw tooth scheme of the external carriage is feasible and effective for low RCS design.展开更多
Background: Orthodontic treatment poses challenges such as discomfort, aesthetic concerns, dietary restrictions, time commitment, and financial considerations for patients. These challenges can deter individuals from ...Background: Orthodontic treatment poses challenges such as discomfort, aesthetic concerns, dietary restrictions, time commitment, and financial considerations for patients. These challenges can deter individuals from pursuing treatment or cause anxiety during the process. However, patients are motivated by the desire to improve their appearance, boost self-confidence, and enhance oral health. They also value the long-term benefits of treatment, including improved dental function and overall well-being. Professional recommendations from dentists and orthodontists, along with social support from family and friends, further encourage patients to undergo treatment. Understanding these challenges and motivating factors is crucial for orthodontic professionals to tailor treatment plans and ensure positive experiences and successful outcomes for their patients. Objective: To determine the challenges and motivating factors of orthodontic treatment among patients attending Komfo Anokye Teaching Hospital. Method: The study was conducted at Komfo Anokye Teaching Hospital in Kumasi, Ghana, with a sample size of 60 orthodontic patients. Data was collected using self-administered questionnaires and analyzed using SPSS software. Ethical approval was obtained, and the findings were shared with stakeholders. Results: Findings showed a higher representation of females (63.3%) seeking orthodontic treatment. Common motivations for seeking orthodontic treatment included aesthetic Concerns (38.2%), misaligned teeth (28.1%) and recommendation from dentist (19.2%). Challenges reported included pain and discomfort (36.7%), difficulty chewing (15%), expensive treatment (14.4%) and missed appointments (11.7%). Factors motivating treatment continuation were visible improvements (30%), achieving optimal results (23%), reducing pain and discomfort (17%). External influences, such as family pressure, also played a role. Patients appreciated the support of healthcare providers during treatment but suggested better pain management and education. Conclusion: The study provided valuable insights into patient motivations, challenges and factors influencing satisfaction and adherence to orthodontic treatment at KATH.展开更多
文摘On the basis of the canard configuration a contour stealth design including chiefly the wing, the fuselage and their connection type is projected. The prime project of a blended wing body vehicle with canard is provided and through the change of the fuselage head form and the different fin disposals, the radar cross section (RCS) is optimized. The average value of RCS and the value of RCS in the ± 45 ° front sector for different designs are illustrated. The model measurement proves that the project having a sharp head fuselage and 30 ° angle double fin has the minimum value of RCS. The wind tunnel test to the model with RCS optimized proved that the vehicle project has excellent aerodynamic characteristics such as high lift curve slope, up to 26° stalling angle, high lift / drag ratio equal to 8, and also has low RCS value in the front sector and in the lateral sector.
文摘This article proposes use of extruded compound materials with optimized resistant cross-sections as an alternative, in this case, seeking the maximum energy density as a design criterion. The advantage of this proposal is that it extends the life cycle and decreases fatigue issues.
基金Aeronautical Science F oundation of China!( 97B5 10 40 )
文摘An external carriage and a wing have a high radar cross section (RCS) level in a wide range of angles of pitch because they form an efficient corner reflector. Coupling scattering between the external carriage and the wing is controlled by designing a saw tooth structure of the external carriage on condition that the wing structure is not changed. A low RCS saw tooth scheme of the external carriage is given in the paper. The ray tracing method and the physical theory of diffraction are used to calculate the radar scattering characteristics of low RCS structures of the external carriage and wing. The results show that the saw tooth scheme of the external carriage is feasible and effective for low RCS design.
文摘Background: Orthodontic treatment poses challenges such as discomfort, aesthetic concerns, dietary restrictions, time commitment, and financial considerations for patients. These challenges can deter individuals from pursuing treatment or cause anxiety during the process. However, patients are motivated by the desire to improve their appearance, boost self-confidence, and enhance oral health. They also value the long-term benefits of treatment, including improved dental function and overall well-being. Professional recommendations from dentists and orthodontists, along with social support from family and friends, further encourage patients to undergo treatment. Understanding these challenges and motivating factors is crucial for orthodontic professionals to tailor treatment plans and ensure positive experiences and successful outcomes for their patients. Objective: To determine the challenges and motivating factors of orthodontic treatment among patients attending Komfo Anokye Teaching Hospital. Method: The study was conducted at Komfo Anokye Teaching Hospital in Kumasi, Ghana, with a sample size of 60 orthodontic patients. Data was collected using self-administered questionnaires and analyzed using SPSS software. Ethical approval was obtained, and the findings were shared with stakeholders. Results: Findings showed a higher representation of females (63.3%) seeking orthodontic treatment. Common motivations for seeking orthodontic treatment included aesthetic Concerns (38.2%), misaligned teeth (28.1%) and recommendation from dentist (19.2%). Challenges reported included pain and discomfort (36.7%), difficulty chewing (15%), expensive treatment (14.4%) and missed appointments (11.7%). Factors motivating treatment continuation were visible improvements (30%), achieving optimal results (23%), reducing pain and discomfort (17%). External influences, such as family pressure, also played a role. Patients appreciated the support of healthcare providers during treatment but suggested better pain management and education. Conclusion: The study provided valuable insights into patient motivations, challenges and factors influencing satisfaction and adherence to orthodontic treatment at KATH.
