A Simplified Method for the Stress Analysis of Underground Transfer Structures Crossing Multiple Subway Tunnels

According to the design specifications,the construction of extended piles involves traversing the tunnel’s upper region and extending to the underlying rock layer.To address this challenge,a subterranean transfer structure spanning multiple subway tunnels was proposed.Deliberating on the function of piles in the transfer structure as springs with axial and bending stiffness,and taking into account the force balance and deformation coordination conditions of beams and plates within the transfer structure,we established a simplified mechanical model that incorporates soil stratification by combining it with the Winkler elastic foundation beam model.The resolved established simplifiedmechanicalmodel employed finite difference technology and the Newton-Simpsonmethod,elucidating the mechanical mechanism of the transfer structure.The research findings suggest that the load carried by the upper structural columns can be transferred to the pile foundation beneath the beams through the transfer structure,subsequently reaching the deep soil layer and ensuring minimal impact on adjacent tunnels.The established simplified analysis method can be used for stress analysis of the transfer structure,concurrently considering soil stratification,pile foundation behavior,and plate action.The pile length,pile section size,and beam section size within the transfer structure should account for the characteristics of the upper load,ensuring an even distribution of the beam bending moment.

Oscillatory Dynamics of a Spherical Solid in a Liquid in an Axisymmetric Variable Cross Section Channel

The dynamics of a solid spherical body in an oscillating liquid flow in a vertical axisymmetric channel of variable cross section is experimentally studied.It is shown that the oscillating liquid leads to the generation of intense averaged flows in each of the channel segments.The intensity and direction of these flows depend on the dimensionless oscillating frequency.In the region of studied frequencies,the dynamics of the considered body is examined when the primary vortices emerging in the flow occupy the whole region in each segment.For a fixed frequency,an increase in the oscillation amplitude leads to a phase-inclusion holding effect,i.e.,the body occupies a quasi-stationary position in one of the cells of the vertical channel,while oscillating around its average position.It is also shown that the oscillating motion of a liquid column generates an averaged force acting on the body,the magnitude of which depends on the properties of the body and its position in the channel.The quasi-stationary position is determined by the relative density and size of the body,as well as the dimensionless frequency.The behavior of the body as a function of the amplitude and frequency of fluid oscillation and relative size is discussed in detail.Such findings may be used in the future to control the position of a phase inclusion and/or to strengthen mass transfer effects in a channel of variable cross section by means of fluid oscillations.

Cross-Layer Adaptive Resource Allocation Algorithm with Diverse QoS Requirements for Single-Cell OFDMA Systems

The orthogonal frequency division multiple access( OFDMA) based communication system has been considered as the main trend of next-Generation communication system. But the existing resource allocation algorithm designed for such system is always with high complexity thus hard to be realized. To solve such problem with the constraints of spectrum efficiency and buffer state,a novel cross-layer resource allocation algorithm( RAA) is proposed in this paper. The goal of our RAA is to maximize the system throughput while satisfying several practical constraints,such as fairness among services,head of line( Ho L) delay and diverse quality of service( Qo S) requirements. Due to these constraints,finding the optimal solution becomes a NPhard problem. Therefore in this paper a novel method to solve such problem with acceptable complexity is proposed within following steps: firstly,based on the link state we formulate the ideal subchannel allocation strategy as a convex optimization problem,which can be efficiently solved by our proposed lagrange multiplier technique subchannel allocation( LMTSA) algorithm; secondly,according to the obtained channel allocation matrix,a power allocation algorithm based on the water-filling power allocation( WPA) idea is deployed to get the optimal power allocation matrix combining with adaptive modulation and coding( AMC); finally,through a greedy algorithm,the ultimate subchannel and power allocation matrix can be obtained based on iterative method. The simulation results illustrate that we can achieve the higher throughput and better Qo S performance than the widely-used maximum throughput( MT) algorithm and round robin( RR) algorithm.

Heat transfer for boundary layers with cross flow

An analysis is presented to study the dual nature of solutions for the forced convective boundary layer flow and heat transfer in a cross flow with viscous dissipation terms in the energy equation. The governing equations are transformed into a set of three self-similar ordinary differential equations by similarity transformations. These equations are solved numerically using the very efficient shooting method. This study reveals that the dual solutions of the transformed similarity equations for velocity and temperature distributions exist for certain values of the moving parameter, Prandtl number, and Eckert numbers. The reverse heat flux is observed for larger Eckert numbers; that is, heat absorption at the wall occurs.

NUMERICAL SIMULATION OF FREE MIXING LAYER WITH CROSS SHEAR

A spectrum method is used to simulate the time-developing free mixing layerwith cross shear which is introduced in different stages. The results show that the properties of flow are nearly the same for situations whether the cross shear is introduced in theinitial time or in early stage. If cross shear is introduced in the stage that the roll-up ofmixing layer occurs, the turbulent intensities of now will increase and mixture of now willbe enhanced.

Role of Cross Layer Based Intrusion Detection System for Wireless Domain

Wireless mesh networks are very common both for organizations and individuals. Many laptops, computers have wireless cards pre-installed for buyer. However a wireless networking has many security issues. An intrusions detection system aim to detect the different attacks against network and system. An intrusion detection system should be capable for detecting the misuse of the network whether it will be by the authenticated user or by an attacker. They detect attempts and active misuse either by legitimate users of the information systems or by external. The present paper deals with cross layer based intrusion detection system for wireless domain—a critical anlaysis. The present paper deals with role of cross layer based intrusion detection system for wireless domain.

A Cross-Layer Scheme for Handover in 802.16e Network with F-HMIPv6 Mobility

IEEE802.16e is the major global cellular wireless standard that enables low-cost mobile Internet application. However, existing handover process system still has latency affects time-sensitive applications. In this paper, the handover procedures of 802.16e and Fast Handover for Hierarchical MIPv6 (F-HMIPv6) are reconstructed to achieve a better transmission performance. The concept of cross layer design is adopted to refine the existing handover procedure specified in 802.16e MAC layer and F-HMIPv6. More specifically, layer2 and layer3 signaling messages for handover are analyzed and combined/interleaved to optimize the handover performance. Extensive simulations show that the proposed scheme in this paper is superior to the other scheme proposed by IETF.

A CROSS-LAYER STRATEGY FOR COOPERATIVE DIVERSITY IN WIRELESS SENSOR NETWORKS

We investigate the problem of how to minimize the energy consumption in multi-hop Wireless Sensor Network (WSN),under the constraint of end-to-end reliability Quality of Seervice (QoS) requirement.Based on the investigation,we jointly consider the routing,relay selection and power allocation algorithm,and present a novel distributed cross-layer strategy using opportunistic relaying scheme for cooperative communication.The results show that under the same QoS requirement,the proposed cross-layer strategy performs better than other cross-layer cooperative communication algorithms in energy efficiency.We also investigated the impact of several parameters on the energy efficiency of the cooperative communication in WSNs,thus can be used to provide guidelines to decide when and how to apply cooperation for a given setup.

On the Development of Realistic Cross Layer Communication Protocol for Wireless Sensor Networks

Traditional protocols in wireless sensor networks follow the strict layering techniques which lead to the degradation in performance of the QoS (Quality of Service) parameters. Battery powered tiny sensor nodes with constraints of energy and guaranteed time require the efficient communication protocols with innovative and optimized approach to attain the objectives of WSN. Especially, these requirements become more stringent with the emergence of novel applications based on WSN. In order to find an optimized solution to this, cross layer-based approach which allows the cooperation, synchronization and communication among the layers, seems to be appropriate. In this paper, a realistic cross-layer protocol has been developed taking into considerations of MAC and Physical layer to further optimize the QoS parameters of already developed Energy Efficient Inter Cluster Coordination Protocol (EEICCP) at the Network layer level. In this paper we endeavor to concentrate on the enhancement of reliability parameter of QoS and results are validated through simulations done in MATLAB.

Proposal for a cross layer scheme for real-time wireless video

This paper focuses on the design of the cross layer between the video application layer and the MIMO physical layer. MIMO physical layer research has promised an enormous increase in the capacity of wireless communication systems. Also MIMO wireless systems operate under fading conditions where the channel faces arbitrary fluctuations. Since the wireless channel changes over each coherence period, the capacity of the wireless channel, given the power constraints, changes. Hence to make efficient use of the available capacity one needs to adapt the video bit rate. However it is impossible to adapt at the application layer as changing the parameters of the video takes more time than the coherence period of the channel. In this paper we address this problem through a novel solution and also investigate its performance through a simulation study.

Novel Optimized Cross-Layer Design with Maximum Weighted Capacity Based Resource Allocation for AMC/HARQ Wireless Networks

To provide quality-of service (QoS) guarantees for heterogeneous applications, most recent wireless communications technologies and standards combine the error-correcting capability of hybrid automatic repeat request (HARQ) schemes at the data link layer (DLL) with the adaptation ability of the adaptive modulation and coding (AMC) modes at the physical layer (PHY) layer. This paper aims to investigate the aggregated system capacity as well as the breakdown of this capacity for different ACM modes in each HARQ scheme. This investigation was done by using maximum weighted capacity (MWC) resource allocation at the PHY layer in conjunction with a novel packet error rate (PER)-based scheduling at the medium access control (MAC) layer. As a result, the dominant AMC mode corresponding to channel SNR was available.

Cross Layer Design for Cooperative Transmission in Wireless Sensor Networks

Several protocols and schemes have been proposed to reduce energy consumption in Wireless Sensor Net-works (WSNs). In this paper we employ farcoopt, a cross layer design approach with the concept of coop-eration among the nodes with best farthest neighbor scheme to increase the Quality of Service (QoS), reduce energy consumption, increases performance and end-to-end throughput. We present cooperative transmission to connect previously disconnect parts of a network thus overcoming the separation problem of multi-hop network. We show that this approach improves connectivity over 50% compared to multi-hop approaches and reduces the number of nodes necessary to provide full coverage of an area up to 35%. Simulation results show that on increase of data rates i.e. packet the network life time increases in farcoopt as compared to tra-ditional multi hop approach. The result of this analysis is presented in this work.

An Energy-Efficient Access Control Algorithm with Cross-Layer Optimization in Wireless Sensor Networks

This paper presents a wireless sensor network (WSN) access control algorithm designed to minimize WSN node energy consumption. Based on slotted ALOHA protocol, this algorithm incorporates the power control of physical layer, the transmitting probability of medium access control (MAC) layer, and the automatic repeat request (ARQ) of link layer. In this algorithm, a cross-layer optimization is preformed to minimizing the energy consuming per bit. Through theory deducing, the transmitting probability and transmitting power level is determined, and the relationship between energy consuming per bit and throughput per node is provided. Analytical results show that the cross-layer algorithm results in a significant energy savings relative to layered design subject to the same throughput per node, and the energy saving is extraordinary in the low throughput region.

Cross-layer Enhancement to Multi-hop Routing in Sensor Networks: an Empirical Study

Lossy link is one of the unique characteristics in random-deployed sensor networks. We envision that robustness and reliability of routing cannot be ensured purely in network layer. Our idea is to enhance the performance of routing protocol by cross-layer interaction. We modified mint protocol, a routing protocol in TinyOS and proposed an enhanced version of mint called PA-mint. A transmission power control interface is added to network layer in PA-mint. When routing performance of the current network is not satisfied, PA-mint monotonically increases the transmission power via the interface we added. PA-mint is able to connect orphan nodes and robust to node mobility or key nodes failure. In the case that automatic request retransmission is employed, the number of retransmissions can be reduced by PA-mint. Results from experiments show that PA-mint increases the reliability and robustness of routing protocol by cross-layer interaction.

Enabling Resource Awareness in Integrated Sensor Grid Framework Using Cross Layer Scheduling Mechanism

Researches related to wireless sensor networks primarily concentrate on Routing, Location Services, Data Aggregation and Energy Calculation Methods. Due to the heterogeneity of sensor networks using the web architecture, cross layer mechanism can be implemented for integrating multiple resources. Framework for Sensor Web using the cross layer scheduling mechanisms in the grid environment is proposed in this paper. The resource discovery and the energy efficient data aggregation schemes are used to improvise the effective utilization capability in the Sensor Web. To collaborate with multiple resources environment, the grid computing concept is integrated with sensor web. Resource discovery and the scheduling schemes in the grid architecture are organized using the medium access control protocol. The various cross layer metrics proposed are Memory Awareness, Task Awareness and Energy Awareness. Based on these metrics, the parameters-Node Waiting Status, Used CPU Status, Average System Utilization, Average Utilization per Cluster, Cluster Usage per Hour and Node Energy Status are determined for the integrated heterogeneous WSN with sensor web in Grid Environment. From the comparative analysis, it is shown that sensor grid architecture with middleware framework has better resource awareness than the normal sensor network architectures.

Cross Layered MAC Design for RF Energy Harvesting Sensor Network

The main research objective in wireless sensor networks (WSN) domain is to develop algorithms and protocols to ensure minimal energy consumption with maximum network lifetime. In this paper, we propose a novel design for energy harvesting sensor node and cross-layered MAC protocol using three adjacent layers (Physical, MAC and Network) to economize energy for WSN. The basic idea behind our protocol is to re-energize the neighboring nodes using the radio frequency (RF) energy transmitted by the active nodes. This can be achieved by designing new energy harvesting sensor node and redesigning the MAC protocol. The results show that the proposed cross layer CL_EHSN improves the life time of the WSN by 40%.

Delivering audiovisual content with MPEG-21-enabled cross-layer QoS adaptation

Future multimedia communication systems have to support the user’s needs, the terminal capabilities, the content specification and the underlying networking technologies. The related protocols and applications must be designed from this integration perspective in a cross-layer centric manner. In this paper, we propose an implementation of a streaming service (e.g., Television over IP service) with a unified QoS management concept that enables an IP driven integration of different system components (terminal, user, content, and network). The MPEG-21 framework is used to provide a common support for imple- menting and managing the end-to-end QoS. The main focus of this paper is on the architecture design, protocols specification and implementation evaluation. Performance evaluations using PSNR and SSIM objective video quality metrics show the benefit of the proposed MPEG-21-enabled cross-layer adaptation.

A Novel Cross-Layer Scheduling Algorithm for OFDMA-Based WiMAX Networks

IEEE 802.16e based WiMAX networks promise a desirable available quality of service for mobile users and scheduling algorithms provide the best effective use of network resources in it. In this paper, we propose a novel cross-layer scheduling algorithm for OFDMA-based WiMAX networks. Our scheme employs a priority function at the MAC layer and a slot allocation policy at physical layer and by interaction between these two layers specifies the best allocation for each connection. Simulation results show performance of proposed scheme in comparison with two other well-known scheduling algorithms, MAX-SNR scheduling and Proportional Fairness (PF) scheduling. Our proposed cross-layer algorithm outperforms the other algorithms in delay and packet loss rate values for real-time services.

Saint-Venant torsion analysis of bars with rectangular cross-section and effective coating layers

This paper investigates the torsion analysis of coated bars with a rectangular cross-section. Two opposite faces of a bar are coated by two isotropie layers with different materials of the original substrate that are perfectly bonded to the bar. With the Saint- Venant torsion theory, the governing equation of the problem in terms of the warping function is established and solved using the finite Fourier cosine transform. The state of stress on the cross-section, warping of the cross-section, and torsional rigidity of the bar are evaluated. Effects of thickness of the coating layers and material properties on these quantities are investigated. A set of graphs are provided that can be used to determine the coating thicknesses and material properties so as to keep the maximum von Mises stress on the cross-section below an allowable value for effective use of the coating layer.

Cross-Layer Design Based Optimized Link State Routing Protocol for Wireless Mesh Networks

A proactive routing protocol CL-OLSR （cross-layer based optimized link state routing） by using a brand-new routing metric CLM （cross-layer metric） is proposed. CL-OLSR takes into account four link quality impact factors in route calculation through the cross-layer operation mechanism： the node available bandwidth, the node load, the link delivery rate, and the link interference, and thus the effect of route selection is optimized greatly. The simulation results show that the proposed CL-OLSR protocol can not only improve the network throughput to a large extent, but also reduce the end-to-end delay, while achieving load balance route results.