With the aim to discover water, life and resources in other planets, robotic sampling instrument is a crucial part of the space exploration robot. To remove dusty and weathered surfaces and expose the fresh rock under...With the aim to discover water, life and resources in other planets, robotic sampling instrument is a crucial part of the space exploration robot. To remove dusty and weathered surfaces and expose the fresh rock underneath the planetary surface, a robotic rock grinder is considered to replace the geolo- gist’s rock hammer to carry out the geological investigation. A primary prototype of the robotic rock grinder with three degrees of freedom has been developed in this paper. Planetary transmission system is used in the grinding driving system with two inputs (rotation motor and revolution motor) and two outputs (grinding wheel and cutting brush). The grinding wheel with two teeth has been used to abrade the rock. The cutting brush is used to sweep the debris. The third actuator is to feed the grinding sys- tem. Kinematics of the grinding system has been analyzed. To get a continuous and smooth fresh face over the rock, grinding trajectory of the grinding wheel has been discussed and planned. Lastly, abra- sion experiments have been made to testify the feasibility and the basic function of this system.展开更多
基金Supported by the Chinese Academy of Sciences Innovative Research Fund (Grant No. A050105) and the GUCAS-BHPB Billiton Scholarship
文摘With the aim to discover water, life and resources in other planets, robotic sampling instrument is a crucial part of the space exploration robot. To remove dusty and weathered surfaces and expose the fresh rock underneath the planetary surface, a robotic rock grinder is considered to replace the geolo- gist’s rock hammer to carry out the geological investigation. A primary prototype of the robotic rock grinder with three degrees of freedom has been developed in this paper. Planetary transmission system is used in the grinding driving system with two inputs (rotation motor and revolution motor) and two outputs (grinding wheel and cutting brush). The grinding wheel with two teeth has been used to abrade the rock. The cutting brush is used to sweep the debris. The third actuator is to feed the grinding sys- tem. Kinematics of the grinding system has been analyzed. To get a continuous and smooth fresh face over the rock, grinding trajectory of the grinding wheel has been discussed and planned. Lastly, abra- sion experiments have been made to testify the feasibility and the basic function of this system.
