Ligand assisted reprecipitation(LARP)is a widely used method for cesium lead halide perovskite nanocrystals(NCs)synthesis.Nevertheless,the ultrafast kinetics of LARP,as well as the inefficient transport properties and...Ligand assisted reprecipitation(LARP)is a widely used method for cesium lead halide perovskite nanocrystals(NCs)synthesis.Nevertheless,the ultrafast kinetics of LARP,as well as the inefficient transport properties and discontinuity of batch reactors,challenge the particle size control and experimental repeatability.To address these issues,an ultrasonic cavitation-enabled microfluidic approach was developed to achieve the continuous synthesis of cesium lead halide perovskite via LARP.It was found that the mixing between the good solvent and antisolvent in the microchannel was greatly enhanced by intensive ultrasonic cavitation.The mixing time could be reduced to below 10 ms under the irradiation of 35 W ultrasound.By modulating the mixing degree,LARP was proved to be a mixing-sensitive process.The effects of ultrasonic power,ultrasonic treatment time,total flow rate,water additive,and reprecipitation temperature on the synthesis of CsPbBr_(3) NCs were systematically investigated.As compared to CsPbBr_(3) NCs synthesized in the batch reactor,the sample synthesized via the ultrasonic cavitation-enabled microfluidic approach possessed stronger photoluminescence intensity and better repeatability.Moreover,the ultrasonic cavitation-enabled microfluidic approach could also realize the continuous synthesis of cesium lead halide perovskite NCs with different halide compositions to cover a wide visible spectrum(426-661 nm).The ultrasonic cavitation-enabled microfluidic approach paved the way for the large-scale of high-quality cesium lead halide perovskite NCs.展开更多
Perovskite nanocrystals(NCs) with high two-photon absorption(TPA) cross-section are of great interest due to their potential applications in three-dimensional optical data storage and multiphoton fluorescence microsco...Perovskite nanocrystals(NCs) with high two-photon absorption(TPA) cross-section are of great interest due to their potential applications in three-dimensional optical data storage and multiphoton fluorescence microscopy. Among various perovskite materials, FAPbBr_(3) NCs show a better development prospect due to their excellent stability. However, there are few reports on their nonlinear optical properties. In this work, the nonlinear optical behavior of FAPbBr_(3) NCs is studied.The methods of multiphoton absorption photoluminescence saturation and open aperture Z-scan technique were applied to determine the TPA cross-section of FAPbBr_(3)NCs, which was around 2.76 × 10^(-45)cm^(4)·s·photon^(-1) at 800 nm. In addition,temperature-dependent photoluminescence induced by TPA was investigated, and the small longitudinal optical phonon energy and electron–phonon coupling strength was obtained, which confirm the weak Pb–Br interaction. Meanwhile, it is found that the exciton binding energy in FAPbBr_(3) NCs was 69.668 me V, which may be ascribed to the strong hydrogen bond interaction. It is expected that our findings will promote the application of FAPbBr_(3) NCs in optoelectronic devices.展开更多
Lutetium oxide nanocrystals codoped with Tm3+ and Yb3+ were synthesized by the reverse-like co-precipitation method, using ammonium hydrogen carbonate as precipitant. Effects of the Tm3+, Yb3+ molar fractions and ...Lutetium oxide nanocrystals codoped with Tm3+ and Yb3+ were synthesized by the reverse-like co-precipitation method, using ammonium hydrogen carbonate as precipitant. Effects of the Tm3+, Yb3+ molar fractions and calcination temperature on the structural and upconversion luminescent properties of the Lu2O3 nanocrystals were investigated. The XRD results show that all the prepared nanocrystals can be readily indexed to pure cubic phase of Lu2O3 and indicate good crystallinity. The experimental results show that concentration quenching occurs when the mole fraction of Tm3+ is above 0.2%. The optimal Tm3+ and Yb3+ doped molar fractions are 0.2% and 2%, respectively. The strong blue (490 nm) and the weak red (653 nm) emissions from the prepared nanocrystals were observed under 980 nm laser excitation, and attributed to the 1G4→3H6 and IG4→3F4 transitions of Tm3+, respectively. Power-dependent study reveals that the 1G4 levels of Tm3+ can be populated by three-step energy transfer process. The upconversion emission intensities of 490 nm and 653 nm increase gradually with the increase of calcination temperature. The enhancement of the upconversion luminescence is suggested to be the consequence of reducing number of OH- groups and the enlarged nanoerystal size.展开更多
Helical hierarchy found in biomolecules like cellulose,chitin,and collagen underpins the remarkable mechanical strength and vibrant colors observed in living organisms.This study advances the integration of helical/ch...Helical hierarchy found in biomolecules like cellulose,chitin,and collagen underpins the remarkable mechanical strength and vibrant colors observed in living organisms.This study advances the integration of helical/chiral assembly and 3D printing technology,providing precise spatial control over chiral nano/microstructures of rod-shaped colloidal nanoparticles in intricate geometries.We designed reactive chiral inks based on cellulose nanocrystal(CNC)suspensions and acrylamide monomers,enabling the chiral assembly at nano/microscale,beyond the resolution seen in printed materials.We employed a range of complementary techniques including Orthogonal Superposition rheometry and in situ rheo-optic measurements under steady shear rate conditions.These techniques help us to understand the nature of the nonlinear flow behavior of the chiral inks,and directly probe the flow-induced microstructural dynamics and phase transitions at constant shear rates,as well as their post-flow relaxation.Furthermore,we analyzed the photo-curing process to identify key parameters affecting gelation kinetics and structural integrity of the printed object within the supporting bath.These insights into the interplay between the chiral inks self-assembly dynamics,3D printing flow kinematics and photopolymerization kinetics provide a roadmap to direct the out-of-equilibrium arrangement of CNC particles in the 3D printed filaments,ranging from uniform nematic to 3D concentric chiral structures with controlled pitch length,as well as random orientation of chiral domains.Our biomimetic approach can pave the way for the creation of materials with superior mechanical properties or programable photonic responses that arise from 3D nano/microstructure and can be translated into larger scale 3D printed designs.展开更多
Crystallization process determines the quality of perovskite films and the performances of resultant perovskite solar cells(PSCs).Dimethylamine oxalate has been proven as a multifunctional modulator,and is explored as...Crystallization process determines the quality of perovskite films and the performances of resultant perovskite solar cells(PSCs).Dimethylamine oxalate has been proven as a multifunctional modulator,and is explored as an efficient additive in manipulating the crystallization process of CsPbI_(3) perovskite films.On one hand,oxalate serves as the precipitator that facilitates the nucleation process of intermediate.The larger size of intermediate is conductive to the larger size and smaller grain boundaries of resultant perovskite.On the other hand,in subsequent annealing process,the phase conversion and growth process of transient perovskite can be decelerated due to the strong interactions of oxalate with both dimethylamine cation(DMA^(+))and Pb^(2+).Due to the optimized crystallization kinetics,the morphology and quality of CsPbI_(3) perovskite films are comprehensively improved with lower defect concentrations,and charge recombination loss is effectively suppressed.Benefiting from the optimized crystal quality of perovskite films,the carbon electrode-based CsPbI_(3) PSCs exhibit a champion efficiency of 18.48%.This represents one of the highest levels among all hole transport layer-free inorganic perovskite solar cells.展开更多
CsPbI_(3)perovskite quantum dots(QDs)are ideal materials for the next generation of red light-emitting diodes.However,the low phase stability of CsPbI_(3)QDs and long-chain insulating capping ligands hinder the improv...CsPbI_(3)perovskite quantum dots(QDs)are ideal materials for the next generation of red light-emitting diodes.However,the low phase stability of CsPbI_(3)QDs and long-chain insulating capping ligands hinder the improvement of device performance.Traditional in-situ ligand replacement and ligand exchange after synthesis were often difficult to control.Here,we proposed a new ligand exchange strategy using a proton-prompted insitu exchange of short 5-aminopentanoic acid ligands with long-chain oleic acid and oleylamine ligands to obtain stable small-size CsPbI_(3)QDs.This exchange strategy maintained the size and morphology of CsPbI_(3)QDs and improved the optical properties and the conductivity of CsPbI_(3)QDs films.As a result,high-efficiency red QD-based light-emitting diodes with an emission wavelength of 645 nm demonstrated a record maximum external quantum efficiency of 24.45%and an operational half-life of 10.79 h.展开更多
As a noble metal substitute,two-dimensional(2D)hierarchical nano-frame structures have attracted great interest as candidate catalysts due to their remarkable advantages-high intrinsic activity,high electron mobility,...As a noble metal substitute,two-dimensional(2D)hierarchical nano-frame structures have attracted great interest as candidate catalysts due to their remarkable advantages-high intrinsic activity,high electron mobility,and straightforward surface functionalization.Therefore,they may replace Pt-based catalysts in oxygen reduction reaction(ORR)applications.Herein,a simple method is developed to design hierarchical nano-frame structures assembled via 2D NiO and N-doped graphene(NG)nanosheets.This procedure can yield nanostructures that satisfy the criteria correlated with improved electrocatalytic performance,such as large surface area,numerous undercoordinated atoms,and high defect densities.Further,porous NG nanosheet architectures,featuring NiO nanosheets densely coordinated with accessible holey Fe_(2)O_(3) moieties,can enhance mesoporosity and balance hydrophilicity.Such improvements can facilitate charge transport and expose formerly inaccessible reaction sites,maximizing active site density utilization.Density functional theory(DFT)calculations reveal favored O_(2) adsorption and dissociation on Fe_(2)O_(3) hybrid structures when supported by 2D NiO and NG nanomaterials,given 2D materials donated charge to Fe_(2)O_(3) active sites.Our systematic studies reveal that synergistic contributions are responsible for enriching the catalytic activity of Fe_(2)O_(3)@NiO/NG in alkaline media-encompassing internal voids and pores,unique hierarchical support structures,and concentrated N-dopant and bimetallic atomic interactions.Ultimately,this work expands the toolbox for designing and synthesizing highly efficient 2D/2D shelled functional nanomaterials with transition metals,endeavoring to benefit energy conversion and related ORR applications.展开更多
The remarkable evolution of metal halide perovskites in the past decade makes them promise for next-generation optoelectronic material.In particular,nanocrystals(NCs)of inorganic perovskites have demonstrated excellen...The remarkable evolution of metal halide perovskites in the past decade makes them promise for next-generation optoelectronic material.In particular,nanocrystals(NCs)of inorganic perovskites have demonstrated excellent performance for light-emitting and display applications.However,the presence of surface defects on the NCs negatively impacts their performance in devices.Herein,we report a compatible facial post-treatment of CsPbI_(3) nanocrystals using guanidinium iodide(GuI).It is found that the GuI treatment effectively passivated the halide vacancy defects on the surface of the NCs while offering effective surface protection and exciton confinement thanks to the beneficial contribution of iodide and guanidinium cation.As a consequence,the film of treated CsPbI_(3) nanocrystals exhibited significantly enhanced luminescence and charge transport properties,leading to high-performance light-emitting diode with maximum external quantum efficiency of 13.8%with high brightness(peak luminance of 7039 cd m^(−2) and a peak current density of 10.8 cd A^(−1)).The EQE is over threefold higher than performance of untreated device(EQE:3.8%).The operational half-lifetime of the treated devices also was significantly improved with T50 of 20 min(at current density of 25 mA cm^(−2)),outperforming the untreated devices(T50~6 min).展开更多
A facile co-precipitation route for the synthesis of well-dispersed LaCoO3 nanocrystals was developed. The asprepared products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM),...A facile co-precipitation route for the synthesis of well-dispersed LaCoO3 nanocrystals was developed. The asprepared products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray spectrometer (EDX), and laser Raman spectroscopy (LRS). The resuks showed that modulating the growth parameters, such as the addition of surfactants as well as the adding manner of the precipitator had a significant effect on the overall shape and size of the obtained nanocrystals. The nanorods with the diameter of 20 nm and spherical LaCoO3 nanocrystals with the size of about 25 nm could be obtained at a relatively low calcining temperature of 600℃. Furthermore, the Raman properties of LaCoO3 products obtained at different calcining temperatures were investigated.展开更多
A synthesis of LaF3:0.04Yb^3+,0.01Er^3+ nanocrystals with oleic acid as a capping ligand was presemed. The X-Ray Diffraction (XRD) pattern indicated that the power was a single hexagonal phase. Transmission Elect...A synthesis of LaF3:0.04Yb^3+,0.01Er^3+ nanocrystals with oleic acid as a capping ligand was presemed. The X-Ray Diffraction (XRD) pattern indicated that the power was a single hexagonal phase. Transmission Electron Microscopy (TEM) demonstrated that the average size of the nanocrystals was less than 10 nm, with a narrow size distribution. The nanocrystals were dispersible in nonpolar solvents and form a fully transparent colloidal solution, and the solution was stable for several months without any aggregates. The Yb^3+-Er^3+ codoped nanocrystal colloidal solution exhibited a bright green upconversion fluorescence under 980 nm excitation from a diode laser. The nanocrystals were potentially applicable in biolabeling and bioimaging.展开更多
Quantum chemistry calculations of La , Ca modified and pure PbTiO\-3 nanocrystals were carried out by means of the cluster model in DFT DVM calculating program on which the regularity of the charge distribution was...Quantum chemistry calculations of La , Ca modified and pure PbTiO\-3 nanocrystals were carried out by means of the cluster model in DFT DVM calculating program on which the regularity of the charge distribution was drawn. The analysis of the density of state(DOS) showed that when the cubic phase PbTiO 3 nanocrystal is changed into tetragonal phase, the interaction among Ti 3d , O 2p , and Pb 6p atomic orbitals causes the dipole moment and spontaneous polarization on the axis of the crystal, which resulted in the appearance of ferroelectric phase. At the same time, the dipole moment and the intensity of the spontaneous polarization were calculated as well.展开更多
In this paper,we report for the first time the controlled synthesis of lanthanide ion(Ln3+)-doped tetragonal-phase Na3Zr F7nanocrystals(NCs)via a high-temperature co-precipitation approach.The as-synthesized Na3Zr F7N...In this paper,we report for the first time the controlled synthesis of lanthanide ion(Ln3+)-doped tetragonal-phase Na3Zr F7nanocrystals(NCs)via a high-temperature co-precipitation approach.The as-synthesized Na3Zr F7NCs are systematically studied by utilizing the XRD,TEM as well as high-resolution photoluminescence(PL)spectroscopy.The morphology and size for the as-synthesized Na3Zr F7NCs can be finely controlled by changing the experimental parameters such as the amount of precursor,solvent ratio,reaction temperature and time.By utilizing the red-emitting Eu3+ion as an efficient optical/structural probe,the successful hetero-valence doping of Ln3+activators in the lattices of Na3Zr F7NCs is well-established regardless of their different valences and radii between host Zr4+ion and Ln3+dopant.As a result,intense upconversion(UC)luminescence(UCL)ranging from UV to visible and to NIR spectral regions can be readily achieved after the doping of typical UCL couples of Yb3+/Er3+,Yb3+/Tm3+and Yb3+/Ho3+into the lattices of Na3Zr F7NCs when excited by using a 980-nm NIR diode laser.展开更多
Ba0.65Sr0.35TiO3(BST) nanocrystals doped with different concentrations of Er^3+ ion were fabricated using sol-gel method. The structure and morphology of these BST nanocrystals were studied using X-ray diffraction...Ba0.65Sr0.35TiO3(BST) nanocrystals doped with different concentrations of Er^3+ ion were fabricated using sol-gel method. The structure and morphology of these BST nanocrystals were studied using X-ray diffraction(XRD), field emission scanning electron microscopy(FESEM) and transmission electron microscopy(TEM). The X-ray diffraction patterns of all the nanocrystals prepared in the study correspond to polycrystalline perovskite BST structure. The blue and green upconversion luminescence properties of Er^3+ doped BST nanocrystals were investigated under excitation by a 785-nm laser. The upconversion emission bands centered at 407, 523, and 547 nm can be attributed to ^2H9/2, ^4I15/2, ^2H11/2, ^4I15/2, and ^4S3/2, 4I15/2 transitions of Er^3+ ion, respectively. The upconversion mechanism was studied in detail, based on the laser power dependence of the upconverted emissions. In addition, we examined the dependence of the intensity of green upconverted luminescence on the doping concentration of Er^3+ ions, and discussed the mechanism underlying the process.展开更多
Precisely regulating of the surface structure of crystalline materials to improve their catalytic activity for lithium polysulfides is urgently needed for high-performance lithium-sulfur(Li-S)batteries.Herein,high-ind...Precisely regulating of the surface structure of crystalline materials to improve their catalytic activity for lithium polysulfides is urgently needed for high-performance lithium-sulfur(Li-S)batteries.Herein,high-index faceted iron oxide(Fe_(2)O_(3))nanocrystals anchored on reduced graphene oxide are developed as highly efficient bifunctional electrocatalysts,effectively improving the electrochemical performance of Li-S batteries.The theoretical and experimental results all indicate that high-index Fe_(2)O_(3)crystal facets with abundant unsaturated coordinated Fe sites not only have strong adsorption capacity to anchor polysulfides but also have high catalytic activity to facilitate the redox transformation of polysulfides and reduce the decomposition energy barrier of Li_(2)S.The Li-S batteries with these bifunctional electrocatalysts exhibit high initial capacity of 1521 mAh g^(-1)at 0.1 C and excellent cycling performance with a low capacity fading of 0.025%per cycle during 1600 cycles at 2 C.Even with a high sulfur loading of 9.41 mg cm^(-2),a remarkable areal capacity of 7.61 mAh cm^(-2)was maintained after 85 cycles.This work provides a new strategy to improve the catalytic activity of nanocrystals through the crystal facet engineering,deepening the comprehending of facet-dependent activity of catalysts in Li-S chemistry,affording a novel perspective for the design of advanced sulfur electrodes.展开更多
基金the financial supports from National Natural Science Foundation of China(22178336 and 21991103).
文摘Ligand assisted reprecipitation(LARP)is a widely used method for cesium lead halide perovskite nanocrystals(NCs)synthesis.Nevertheless,the ultrafast kinetics of LARP,as well as the inefficient transport properties and discontinuity of batch reactors,challenge the particle size control and experimental repeatability.To address these issues,an ultrasonic cavitation-enabled microfluidic approach was developed to achieve the continuous synthesis of cesium lead halide perovskite via LARP.It was found that the mixing between the good solvent and antisolvent in the microchannel was greatly enhanced by intensive ultrasonic cavitation.The mixing time could be reduced to below 10 ms under the irradiation of 35 W ultrasound.By modulating the mixing degree,LARP was proved to be a mixing-sensitive process.The effects of ultrasonic power,ultrasonic treatment time,total flow rate,water additive,and reprecipitation temperature on the synthesis of CsPbBr_(3) NCs were systematically investigated.As compared to CsPbBr_(3) NCs synthesized in the batch reactor,the sample synthesized via the ultrasonic cavitation-enabled microfluidic approach possessed stronger photoluminescence intensity and better repeatability.Moreover,the ultrasonic cavitation-enabled microfluidic approach could also realize the continuous synthesis of cesium lead halide perovskite NCs with different halide compositions to cover a wide visible spectrum(426-661 nm).The ultrasonic cavitation-enabled microfluidic approach paved the way for the large-scale of high-quality cesium lead halide perovskite NCs.
基金Project supported by the National Natural Science Foundation of China (Grant No. 62174079)the Fund from the Science, Technology, and Innovation Commission of Shenzhen Municipality (Grant Nos. JCYJ20220530113015035, JCYJ20210324120204011, JCYJ20190808121211510, and KQTD2015071710313656)。
文摘Perovskite nanocrystals(NCs) with high two-photon absorption(TPA) cross-section are of great interest due to their potential applications in three-dimensional optical data storage and multiphoton fluorescence microscopy. Among various perovskite materials, FAPbBr_(3) NCs show a better development prospect due to their excellent stability. However, there are few reports on their nonlinear optical properties. In this work, the nonlinear optical behavior of FAPbBr_(3) NCs is studied.The methods of multiphoton absorption photoluminescence saturation and open aperture Z-scan technique were applied to determine the TPA cross-section of FAPbBr_(3)NCs, which was around 2.76 × 10^(-45)cm^(4)·s·photon^(-1) at 800 nm. In addition,temperature-dependent photoluminescence induced by TPA was investigated, and the small longitudinal optical phonon energy and electron–phonon coupling strength was obtained, which confirm the weak Pb–Br interaction. Meanwhile, it is found that the exciton binding energy in FAPbBr_(3) NCs was 69.668 me V, which may be ascribed to the strong hydrogen bond interaction. It is expected that our findings will promote the application of FAPbBr_(3) NCs in optoelectronic devices.
基金Foundation item: Projects (10704090,10774140,11047147)supported by the National Natural Science Foundation of ChinaProjects (KJ090514,KJTD201016)supported by the Natural Science Foundation of Chongqing Municipal Education Commission,China
文摘Lutetium oxide nanocrystals codoped with Tm3+ and Yb3+ were synthesized by the reverse-like co-precipitation method, using ammonium hydrogen carbonate as precipitant. Effects of the Tm3+, Yb3+ molar fractions and calcination temperature on the structural and upconversion luminescent properties of the Lu2O3 nanocrystals were investigated. The XRD results show that all the prepared nanocrystals can be readily indexed to pure cubic phase of Lu2O3 and indicate good crystallinity. The experimental results show that concentration quenching occurs when the mole fraction of Tm3+ is above 0.2%. The optimal Tm3+ and Yb3+ doped molar fractions are 0.2% and 2%, respectively. The strong blue (490 nm) and the weak red (653 nm) emissions from the prepared nanocrystals were observed under 980 nm laser excitation, and attributed to the 1G4→3H6 and IG4→3F4 transitions of Tm3+, respectively. Power-dependent study reveals that the 1G4 levels of Tm3+ can be populated by three-step energy transfer process. The upconversion emission intensities of 490 nm and 653 nm increase gradually with the increase of calcination temperature. The enhancement of the upconversion luminescence is suggested to be the consequence of reducing number of OH- groups and the enlarged nanoerystal size.
基金the support from the University of South Carolina
文摘Helical hierarchy found in biomolecules like cellulose,chitin,and collagen underpins the remarkable mechanical strength and vibrant colors observed in living organisms.This study advances the integration of helical/chiral assembly and 3D printing technology,providing precise spatial control over chiral nano/microstructures of rod-shaped colloidal nanoparticles in intricate geometries.We designed reactive chiral inks based on cellulose nanocrystal(CNC)suspensions and acrylamide monomers,enabling the chiral assembly at nano/microscale,beyond the resolution seen in printed materials.We employed a range of complementary techniques including Orthogonal Superposition rheometry and in situ rheo-optic measurements under steady shear rate conditions.These techniques help us to understand the nature of the nonlinear flow behavior of the chiral inks,and directly probe the flow-induced microstructural dynamics and phase transitions at constant shear rates,as well as their post-flow relaxation.Furthermore,we analyzed the photo-curing process to identify key parameters affecting gelation kinetics and structural integrity of the printed object within the supporting bath.These insights into the interplay between the chiral inks self-assembly dynamics,3D printing flow kinematics and photopolymerization kinetics provide a roadmap to direct the out-of-equilibrium arrangement of CNC particles in the 3D printed filaments,ranging from uniform nematic to 3D concentric chiral structures with controlled pitch length,as well as random orientation of chiral domains.Our biomimetic approach can pave the way for the creation of materials with superior mechanical properties or programable photonic responses that arise from 3D nano/microstructure and can be translated into larger scale 3D printed designs.
基金supported by the National Natural Science Foundation of China(Nos.U21A20310,22278164,22122805,22308112)the Science and Technology Program of Guangzhou,China(No.2023A04J0665)China Postdoctoral Science Foundation(No.2023M741214)。
文摘Crystallization process determines the quality of perovskite films and the performances of resultant perovskite solar cells(PSCs).Dimethylamine oxalate has been proven as a multifunctional modulator,and is explored as an efficient additive in manipulating the crystallization process of CsPbI_(3) perovskite films.On one hand,oxalate serves as the precipitator that facilitates the nucleation process of intermediate.The larger size of intermediate is conductive to the larger size and smaller grain boundaries of resultant perovskite.On the other hand,in subsequent annealing process,the phase conversion and growth process of transient perovskite can be decelerated due to the strong interactions of oxalate with both dimethylamine cation(DMA^(+))and Pb^(2+).Due to the optimized crystallization kinetics,the morphology and quality of CsPbI_(3) perovskite films are comprehensively improved with lower defect concentrations,and charge recombination loss is effectively suppressed.Benefiting from the optimized crystal quality of perovskite films,the carbon electrode-based CsPbI_(3) PSCs exhibit a champion efficiency of 18.48%.This represents one of the highest levels among all hole transport layer-free inorganic perovskite solar cells.
基金This work was financially supported by the National Key Research and Development Program of China(2022YFB3602902)the Key Projects of National Natural Science Foundation of China(62234004)+5 种基金Innovation and Entrepreneurship Team of Zhejiang Province(2021R01003)Science and Technology Innovation 2025 Major Project of Ningbo(2022Z085)Ningbo 3315 Programme(2020A-01-B)YONGJIANG Talent Introduction Programme(2021A-038-B)Flexible Electronics Zhejiang Province Key Laboratory Fund Project(2022FEO02)Zhejiang Provincial Natural Science Foundation of China(LR21F050001).
文摘CsPbI_(3)perovskite quantum dots(QDs)are ideal materials for the next generation of red light-emitting diodes.However,the low phase stability of CsPbI_(3)QDs and long-chain insulating capping ligands hinder the improvement of device performance.Traditional in-situ ligand replacement and ligand exchange after synthesis were often difficult to control.Here,we proposed a new ligand exchange strategy using a proton-prompted insitu exchange of short 5-aminopentanoic acid ligands with long-chain oleic acid and oleylamine ligands to obtain stable small-size CsPbI_(3)QDs.This exchange strategy maintained the size and morphology of CsPbI_(3)QDs and improved the optical properties and the conductivity of CsPbI_(3)QDs films.As a result,high-efficiency red QD-based light-emitting diodes with an emission wavelength of 645 nm demonstrated a record maximum external quantum efficiency of 24.45%and an operational half-life of 10.79 h.
基金supported by the National Research Foundation of Korea(NRF)funded by Ministry of Science and ICT(MSIT)(RS2023-00235596)and ERC Center(2022R1A5A1033719)。
文摘As a noble metal substitute,two-dimensional(2D)hierarchical nano-frame structures have attracted great interest as candidate catalysts due to their remarkable advantages-high intrinsic activity,high electron mobility,and straightforward surface functionalization.Therefore,they may replace Pt-based catalysts in oxygen reduction reaction(ORR)applications.Herein,a simple method is developed to design hierarchical nano-frame structures assembled via 2D NiO and N-doped graphene(NG)nanosheets.This procedure can yield nanostructures that satisfy the criteria correlated with improved electrocatalytic performance,such as large surface area,numerous undercoordinated atoms,and high defect densities.Further,porous NG nanosheet architectures,featuring NiO nanosheets densely coordinated with accessible holey Fe_(2)O_(3) moieties,can enhance mesoporosity and balance hydrophilicity.Such improvements can facilitate charge transport and expose formerly inaccessible reaction sites,maximizing active site density utilization.Density functional theory(DFT)calculations reveal favored O_(2) adsorption and dissociation on Fe_(2)O_(3) hybrid structures when supported by 2D NiO and NG nanomaterials,given 2D materials donated charge to Fe_(2)O_(3) active sites.Our systematic studies reveal that synergistic contributions are responsible for enriching the catalytic activity of Fe_(2)O_(3)@NiO/NG in alkaline media-encompassing internal voids and pores,unique hierarchical support structures,and concentrated N-dopant and bimetallic atomic interactions.Ultimately,this work expands the toolbox for designing and synthesizing highly efficient 2D/2D shelled functional nanomaterials with transition metals,endeavoring to benefit energy conversion and related ORR applications.
基金supported by Australian Research Council Discovery Project(DP190102252).
文摘The remarkable evolution of metal halide perovskites in the past decade makes them promise for next-generation optoelectronic material.In particular,nanocrystals(NCs)of inorganic perovskites have demonstrated excellent performance for light-emitting and display applications.However,the presence of surface defects on the NCs negatively impacts their performance in devices.Herein,we report a compatible facial post-treatment of CsPbI_(3) nanocrystals using guanidinium iodide(GuI).It is found that the GuI treatment effectively passivated the halide vacancy defects on the surface of the NCs while offering effective surface protection and exciton confinement thanks to the beneficial contribution of iodide and guanidinium cation.As a consequence,the film of treated CsPbI_(3) nanocrystals exhibited significantly enhanced luminescence and charge transport properties,leading to high-performance light-emitting diode with maximum external quantum efficiency of 13.8%with high brightness(peak luminance of 7039 cd m^(−2) and a peak current density of 10.8 cd A^(−1)).The EQE is over threefold higher than performance of untreated device(EQE:3.8%).The operational half-lifetime of the treated devices also was significantly improved with T50 of 20 min(at current density of 25 mA cm^(−2)),outperforming the untreated devices(T50~6 min).
基金Project supported by the Postdoctoral Foundation of China (20060390284)Jiangsu Planned Projects for Postdoctoral Research Funds
文摘A facile co-precipitation route for the synthesis of well-dispersed LaCoO3 nanocrystals was developed. The asprepared products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray spectrometer (EDX), and laser Raman spectroscopy (LRS). The resuks showed that modulating the growth parameters, such as the addition of surfactants as well as the adding manner of the precipitator had a significant effect on the overall shape and size of the obtained nanocrystals. The nanorods with the diameter of 20 nm and spherical LaCoO3 nanocrystals with the size of about 25 nm could be obtained at a relatively low calcining temperature of 600℃. Furthermore, the Raman properties of LaCoO3 products obtained at different calcining temperatures were investigated.
基金Project supported by the National Natural Science Foundation of China (10474096 50672030)
文摘A synthesis of LaF3:0.04Yb^3+,0.01Er^3+ nanocrystals with oleic acid as a capping ligand was presemed. The X-Ray Diffraction (XRD) pattern indicated that the power was a single hexagonal phase. Transmission Electron Microscopy (TEM) demonstrated that the average size of the nanocrystals was less than 10 nm, with a narrow size distribution. The nanocrystals were dispersible in nonpolar solvents and form a fully transparent colloidal solution, and the solution was stable for several months without any aggregates. The Yb^3+-Er^3+ codoped nanocrystal colloidal solution exhibited a bright green upconversion fluorescence under 980 nm excitation from a diode laser. The nanocrystals were potentially applicable in biolabeling and bioimaging.
文摘Quantum chemistry calculations of La , Ca modified and pure PbTiO\-3 nanocrystals were carried out by means of the cluster model in DFT DVM calculating program on which the regularity of the charge distribution was drawn. The analysis of the density of state(DOS) showed that when the cubic phase PbTiO 3 nanocrystal is changed into tetragonal phase, the interaction among Ti 3d , O 2p , and Pb 6p atomic orbitals causes the dipole moment and spontaneous polarization on the axis of the crystal, which resulted in the appearance of ferroelectric phase. At the same time, the dipole moment and the intensity of the spontaneous polarization were calculated as well.
基金supported by the Strategic Priority Research Program of CAS(XDB20000000)the NSFC(Nos.21390392,21473205,and 21731006)+1 种基金Youth Innovation Promotion Association of CASthe Natural Science Foundation of Fujian Province(No.2017J01038)
文摘In this paper,we report for the first time the controlled synthesis of lanthanide ion(Ln3+)-doped tetragonal-phase Na3Zr F7nanocrystals(NCs)via a high-temperature co-precipitation approach.The as-synthesized Na3Zr F7NCs are systematically studied by utilizing the XRD,TEM as well as high-resolution photoluminescence(PL)spectroscopy.The morphology and size for the as-synthesized Na3Zr F7NCs can be finely controlled by changing the experimental parameters such as the amount of precursor,solvent ratio,reaction temperature and time.By utilizing the red-emitting Eu3+ion as an efficient optical/structural probe,the successful hetero-valence doping of Ln3+activators in the lattices of Na3Zr F7NCs is well-established regardless of their different valences and radii between host Zr4+ion and Ln3+dopant.As a result,intense upconversion(UC)luminescence(UCL)ranging from UV to visible and to NIR spectral regions can be readily achieved after the doping of typical UCL couples of Yb3+/Er3+,Yb3+/Tm3+and Yb3+/Ho3+into the lattices of Na3Zr F7NCs when excited by using a 980-nm NIR diode laser.
基金Funded by the National Natural Science Foundation of China(No.51302075 and 11174071)the Natural Science Foundation of Hubei Province(No.2012FFB01902)the Scientifi c Research Foundation for Doctoral Program of Hubei Unviersity of Arts and Science
文摘Ba0.65Sr0.35TiO3(BST) nanocrystals doped with different concentrations of Er^3+ ion were fabricated using sol-gel method. The structure and morphology of these BST nanocrystals were studied using X-ray diffraction(XRD), field emission scanning electron microscopy(FESEM) and transmission electron microscopy(TEM). The X-ray diffraction patterns of all the nanocrystals prepared in the study correspond to polycrystalline perovskite BST structure. The blue and green upconversion luminescence properties of Er^3+ doped BST nanocrystals were investigated under excitation by a 785-nm laser. The upconversion emission bands centered at 407, 523, and 547 nm can be attributed to ^2H9/2, ^4I15/2, ^2H11/2, ^4I15/2, and ^4S3/2, 4I15/2 transitions of Er^3+ ion, respectively. The upconversion mechanism was studied in detail, based on the laser power dependence of the upconverted emissions. In addition, we examined the dependence of the intensity of green upconverted luminescence on the doping concentration of Er^3+ ions, and discussed the mechanism underlying the process.
基金This work was supported by the National Natural Science Foundation of China(No.22078078)the Natural Science Foundation of Heilongjiang Province(No.LH2020B008)the State Key Laboratory of Urban Water Resource and Environment,Harbin Institute of Technology(No.2019DX13).
文摘Precisely regulating of the surface structure of crystalline materials to improve their catalytic activity for lithium polysulfides is urgently needed for high-performance lithium-sulfur(Li-S)batteries.Herein,high-index faceted iron oxide(Fe_(2)O_(3))nanocrystals anchored on reduced graphene oxide are developed as highly efficient bifunctional electrocatalysts,effectively improving the electrochemical performance of Li-S batteries.The theoretical and experimental results all indicate that high-index Fe_(2)O_(3)crystal facets with abundant unsaturated coordinated Fe sites not only have strong adsorption capacity to anchor polysulfides but also have high catalytic activity to facilitate the redox transformation of polysulfides and reduce the decomposition energy barrier of Li_(2)S.The Li-S batteries with these bifunctional electrocatalysts exhibit high initial capacity of 1521 mAh g^(-1)at 0.1 C and excellent cycling performance with a low capacity fading of 0.025%per cycle during 1600 cycles at 2 C.Even with a high sulfur loading of 9.41 mg cm^(-2),a remarkable areal capacity of 7.61 mAh cm^(-2)was maintained after 85 cycles.This work provides a new strategy to improve the catalytic activity of nanocrystals through the crystal facet engineering,deepening the comprehending of facet-dependent activity of catalysts in Li-S chemistry,affording a novel perspective for the design of advanced sulfur electrodes.