Surface Metallization of Glass Fiber(GF)/Polyetheretherketone(PEEK) Composite with Cu Coatings Deposited by Magnetron Sputtering and Electroplating

Surface metallization of glass fiber(GF)/polyetheretherketone(PEEK)[GF/PEEK] is conducted by coating copper using electroplating and magnetron sputtering and the properties are determined by X-ray diffraction(XRD), scanning electron microscopy(SEM), and electron backscatter diffraction(EBSD).The coating bonding strength is assessed by pull-out tests and scribing in accordance with GB/T 9286-1998.The results show that the Cu coating with a thickness of 30 μm deposited on GF/PEEK by magnetron sputtering has lower roughness, finer grain size, higher crystallinity, as well as better macroscopic compressive stress,bonding strength, and electrical conductivity than the Cu coating deposited by electroplating.

Microstructure and properties of Cu matrix composites reinforced with surface-modified Kovar particles

The thermal conductivity of Cu/Kovar composites was improved by suppressing element diffusion at the interfaces through the formation of FeWO_(4)coating on the Kovar particles via vacuum deposition.Cu matrix composites reinforced with unmodified(Cu/Kovar)and modified Kovar(Cu/Kovar@)particles were prepared by hot pressing.The results demonstrate that the interfaces of Cu/FeWO_(4)and FeWO_(4)/Kovar in the Cu/Kovar@composites exhibit strong bonding,and no secondary phase is generated.The presence of FeWO_(4)impedes interfacial diffusion within the composite,resulting in an increase in grain size and a decrease in dislocation density.After surface modification of the Kovar particle,the thermal conductivity of Cu/Kovar@composite is increased by 110%from 40.6 to 85.6 W·m^(-1)·K^(-1).Moreover,the thermal expansion coefficient of the Cu/Kovar@composite is 9.8×10^(-6)K^(-1),meeting the electronic packaging requirements.

Theoretically predicted innovative palladium stripe dopingcobalt(111) surface with excellent catalytic performance for carbonmonoxide oxidative coupling to dimethyl oxalate

Pd-based catalysts are extensively employed to catalyze CO oxidative coupling to generate DMO,while the expensive price and high usage of Pd hinder its massive application in industrial production.Designing Pd-based catalysts with high efficiency and low Pd usage as well as expounding the catalytic mechanisms are significant for the reaction.In this study,we theoretically predict that Pd stripe doping Co(111)surface exhibits excellent performance than pure Pd(111),Pd monolayer supporting on Co(111)and Pd single atom doping Co(111)surface,and clearly expound the catalytic mechanisms through the density functional theory(DFT)calculation and micro-reaction kinetic model analysis.It is obtained that the favorable reaction pathway is COOCH_(3)-COOCH_(3)coupling pathway over these four catalysts,while the rate-controlling step is COOCH_(3)+CO+OCH_(3)→2COOCH_(3)on Pd stripe doping Co(111)surface,which is different from the case(2COOCH_(3)→DMO)on pure Pd(111),Pd monolayer supporting on Co(111)and Pd single atom doping Co(111)surface.This study can contribute a certain reference value for developing Pd-based catalysts with high efficiency and low Pd usage for CO oxidative coupling to DMO.

Near Ambient Pressure Adsorption of Nickel Carbonyl Contaminated CO on Cu(111) Surface

Formation of volatile nickel carbonyls with CO in catalytic reaction is one of the mechanisms of catalyst deactivation. CO is one of the most popular probe molecules to study the surface properties in model catalysis. Under ultra-high vacuum (UHV) conditions, the problem of nickel carbonyl impurity almost does not exist in the case that a high purity of CO is used directly. While in the near ambient pressure (NAP) range, nickel carbonyl is easily found on the surface by passing through the Ni containing tubes. Here, the NAP techniques such as NAP-X-ray photoelectron spectroscopy and NAP-scanning tunneling microscopy are used to study the adsorption of nickel carbonyl contaminated CO gas on Cu(111) surface in UHV and NAP conditions. By controlling the pressure of contaminated CO, the Ni-Cu bimetallic catalyst can form on Cu(111) surface. Furthermore, we investigate the process of CO adsorption and dissociation on the formed Ni-Cu bi-metal surface, and several high-pressure phases of CO structures are reported. This work contributes to understanding the interaction of nickel carbonyl with Cu(111) at room temperature, and reminds the consideration of CO molecules contaminated by nickel carbonyl especially in the NAP range study.

Surface Alloying of Submonolayer Pb on Cu(111) Studied by Photoemission

The reactions of superthin Pb Hlms on a Cu(111)surface with respect to the coverage of Pb and annealing have been studied by synchrotron radiation photoemission.The submonolayer Pb atoms deposited at room temperature are distributed on the Cu(111)surface as two-dimensional(2D)islands.Annealing to 200℃ gives rise to Pb-Cu surface alloy formation.Analyses show that the surface alloy occurs only in the first layer of the Cu(111)surface.As a surfactant,Pb can promote 2D layer-by-layer growth of thin Hlms on Cu(111),but the Pb~Cu surface alloying may have an unfavorable effect on the activation process.

A DFT Study of CO Adsorption on the Cu_2O(111) Surface with Oxygen Vacancy

First-principles calculations based on density functional theory （DFr） and the generalized gradient approximation （GGA） have been used to study the adsorption of CO molecule on the Cu2O（111） oxygen-vacancy surface. Calculations indicate that the C-O bond is weakened upon adsorption compared with that over perfect surface. In addition, with the density increase of the defective sites, the adsorption energies of the defect-CO configuration increase whereas the C-O bond nearly remains constant.

A density functional theory study on the adsorption of CO and O_2 on Cu-terminated Cu_2O(111) surface

The adsorptions of CO and 02 molecules individually on the stoichiometric Cu-terminatcd Cu20 （111） surface are investigated by first-principles calculations on the basis of the density functional theory. The calculated results indicate that the CO molecule preferably coordinates to the Cu2 site through its C atom with an adsorption energy of-1.69 eV, whereas the 02 molecule is most stably adsorbed in a tilt type with one O atom coordinating to the Cu2 site and the other O atom coordinating to the Cul site, and has an adsorption energy of -1.97 eV. From the analysis of density of states, it is observed that Cu 3d transfers electrons to 2π orbital of the CO molecule and the highest occupied 5σ orbital of the CO molecule transfers electrons to the substrate. The sharp band of Cu 4s is delocalized when compared to that before the CO molecule adsorption, and overlaps substantially with bands of the adsorbed CO molecule. There is a broadening of the 2π orbital of the 02 molecule because of its overlapping with the Cu 3d orbital, indicating that strong 3d-2π interactions are involved in the chemisorption of the 02 molecule on the surface.

The STM Images of Pt (111) (<img src="http://latex.codecogs.com/gif.latex?\sqrt{3}\times&space;\sqrt{3}"title="\sqrt{3}\times \sqrt{3}"/>)R30&deg;/CO Surface by DFT Calculations

In this work we have performed total-energy calculations of the chemisorption properties and STM images of Pt (111) ( × )R30°/CO Surface;STM Image;ChemisorptionR30°/CO surface by using the density functional theory (DFT) and the projector-augmented wave (PAW) method. The calculations show that carbon monoxide molecule (CO) adsorbs on FCC site in the Pt (111) ( × )R30°/ surface is energetically favored by the GGA-PBE XC-functional, this is in agreement with most of the theoretical calculations which is using different XC-functional at the most. However, these results strongly conflicted with the existing experiments. Actually the calculated work function for the FCC adsorption is quite different from the experiments while the atop one is in good agreement with experiments. We speculate that the atop adsorption for (CO is favorable for the adsorption case at the most. Furthermore, we have calculated the scanning tunneling microscopy (STM) images for both adsorption geometries and suggest that there should be existed remarkable differences in the STM images. The present work provides a faithful criterion accounting for the local surface geometry in Pt (111) ( × )R30°/CO surface from surface work functions and STM images instead of totalenergy calculations.

助剂Ni对Cu(111)表面催化NH_(3)还原NO反应影响的理论研究

针对商用钒钛脱硝催化剂存在的环境污染和易中毒问题,采用无毒环保的单金属铜催化剂并使用助剂Ni掺杂提高其脱硝性能。基于密度泛函理论(DFT),探究了助剂Ni对Cu(111)表面催化NH_(3)还原NO反应的影响。通过分析催化剂表面反应物种的吸附、反应机理和电子结构,对比了助剂Ni掺杂前后Cu(111)表面的催化活性。结果表明,所有反应物种在CuNi(111)表面上的吸附效果均优于在Cu(111)表面的吸附效果。CuNi(111)表面发生的三步基元反应需克服的能垒均低于Cu(111)表面,其中,速控步骤(NH_(2)NO→N_(2)+H_(2)O)的能垒降低了63.6 kJ/mol,可见CuNi(111)表面催化活性明显较高。相比Cu(111)表面,CuNi(111)表面的d带中心更靠近费米能级,说明助剂Ni的掺杂增强了Cu(111)表面电子的活跃性,从而提高了其催化活性。

DFT Investigation of the Adsorption/dissociation Mechanisms of Methyl Nitrite on the Pd(111) Surface

The adsorption behavior of methyl nitrite （MN） on the closed-packed Pd（111） sur- face has been investigated in detail by using density functional theory （DFT）. MN binds to the surface in two alternative forms, using the nitrogen atom attached to the surface. An overall net charge transfer from the substrate to the cis-MN molecule is also confirmed. In addition, the reaction mechanism for the dissociation of MN on the Pd（111） surface has been identified and compared with the methanol decomposition via O-H scission. The results demonstrate that MN is a more active reactant than methanol for the oxidative addition to the Pd catalyst. The possible reason has been analyzed from the adsorption behaviors and reaction barriers, that is, MN is chemically absorbed on the Pd（111） surface; the CHaO-NO bond scission, leading to the formation of adsorbed methoxy species, is much more favorable than that of the O-H bond scission and has a large exothermic behavior.

A Periodic Density Functional Study on Adsorption Properties of Methoxy on Au(111) Surface

Adsorption of CH3O at four sites （top, bridge, hcp, fcc） on Au（111） surface has been investigated by density functional theory method at the generalized gradient approximation level. We have performed calculations on adsorption energies, structures, Mulliken charges and vibrational frequencies of CH3O on Au（111） surface with full-geometry optimization. The predicted results are compared with the available experimental observation. The calculated CH3O adsorption structure and stretching vibrational frequencies agree well with experimental ones, and precise determinations of adsorption sites are carded out. The most favorite adsorption on Au（111） occurs at the bridge site, and O-C axis is tilted to the surface. However, on hollow sites （hcp, fcc） the species is adsorbed in an upright geometry （pseudo-C3v local symmetry）.

Theoretical investigation of lithium ions’ nucleation performance on metal-doped Cu surfaces

Lithium metal batteries(LMBs)of an ultrahigh theoretical energy density have attracted lots of attentions for a wide range of practical applications.However,there are still numerous challenges in LMBs system,such as poor cycling performance,complicated interfacial reactions,low Coulombic efficiency,and uncontrollable lithium dendrites.Understanding Li^+ions’nucleation mechanism is essential to tackle the uncontrolled growth of lithium dendrites.However,the nucleation behavior of Li+ions is interfered by the structural complexities of existing substrates during the reduplicative plating/stripping process and the rational mechanism of uniform nucleation of Li^+ions has not been clearly understood from the theoretical point of view.In our work,first-principles theoretical calculations are carried out to investigate the Li^+ions nucleation performance on metal-doped Cu surfaces(MDCSs)and the key descriptors that determines the properties of various MDCSs are systematically summarized.It is found that the introduction of heterogeneous doping Ag and Zn atoms will induce a gradient adsorption energy on MDCSs,and such gradient deposition sites can reduce the diffusion barriers and accelerate the diffusion rates of Li+ions dynamically.By maneuvering the Li+ions nucleation on MDCSs,a dendrite-free lithium metal anode can be achieved without the use of porous matrixes and complex synthesis process,which can be attributed to suppress the uncontrollable lithium dendrites for realizing the high-efficiency LMBs.

First-principles Study on Geometric and Electronic Structures of Si（111）-√7× √3-In Surface Reconstruction

In order to determine the structures of Si（111）-√7 √3-In surfaces and to understand their electronic properties, we construct six models of both hexagonal and rectangular types and perform first-principles calculations. Their scanning tunneling microscopic images and work functions are simulated and compared with experimental results. In this way, the hex-H3＇ and rect-T1 models are identified as the experimental configurations for the hexagonal and rectangular types, respectively. The structural evolution mechanism of the In/Si（lll） surface with indium coverage around 1.0 monolayer is discussed. The 4×1 and -√7× √3 phases are suggested to have two different types of evolution mechanisms, consistent with experimental results.

DFT Study of Thiophene Adsorption on the Pd(111) and Pt(111) Surfaces

Thiophene adsorption on the（111） surfaces of Pd and Pt have been investigated by density functional theory.The results indicate that the adsorption at the hollow sites is the most stable.To our interest,the molecular plane of thiophene ring is distorted with C=C bond being elongated to 1.450 and C–C bond being shortened to 1.347 ,and the C–H bonds tilt 13.91～44.05o away from this plane.Furthermore,analysis on population and density of states verified the calculated adsorption geometries.Finally,charge analysis suggests that thiophene molecule is an electron acceptor,reflecting the interaction between the lone pair of sulfur and the d-orbitals of metal.

Wafer-scale 30°twisted bilayer graphene epitaxially grown on Cu_(0.75)Ni_(0.25)(111)

Twisted bilayer graphene(TBG) has been extensively studied because of its novel physical properties and potential application in electronic devices.Here we report the synthesis and characterization of 300 TBG naturally grown on Cu_(0.75)Ni_(0.25)(111) film and investigate the electronic structure by angle-resolved photoemission spectroscopy.Compared with other substrates,our TBG with a wafer scale is acquired with a shorter growth time.The Fermi velocity and energy gap of Dirac cones of TBG are comparable with those of a monolayer on Cu_(0.85)Ni_(0.15)(111).The signature of moré lattices has not been observed in either the low-energy electron diffraction patterns or the Fermi surface map within experimental resolution,possibly due to different Cu and Ni contents in the substrates enhancing the different couplings between the substrate and the first/second layers and hindering the formation of a quasiperiodic structure.

Surface Topography and Roughness of High-speed Milled AlMn1Cu

The aluminum alloy AlMn1Cu has been broadly applied for functional parts production because of its good properties. But few researches about the machining mechanism and the surface roughness were reported. The high-speed milling experiments are carried out in order to improve the machining quality and reveal the machining mechanism. The typical topography features of machined surface are observed by scan electron microscope（SEM）. The results show that the milled surface topography is mainly characterized by the plastic shearing deformation surface and material piling zone. The material flows plastically along the end cutting edge of the flat-end milling tool and meanwhile is extruded by the end cutting edge, resulting in that materials partly adhere to the machined surface and form the material piling zone. As the depth of cut and the feed per tooth increase, the plastic flow of materials is strengthened and the machined surface becomes rougher. However, as the cutting speed increases, the plastic flow of materials is weakened and the milled surface becomes smoother. The cutting parameters （e.g. cutting speed, feed per tooth and depth of cut） influencing the surface roughness are analyzed. It can be concluded that the roughness of the machined surface formed by the end cutting edge is less than that by the cylindrical cutting edge when a cylindrical flat-end mill tool is used for milling. The proposed research provides the typical topography features of machined surface of the anti-rust aluminum alloy AlMn1Cu in high speed milling.

Theoretical Study on the Adsorption and Decomposition of Methanol over the Pt-Mo(111)/C Surface

The density functional theory（DFT） and self-consistent periodic calculation were used to investigate the methanol adsorption on the Pt-Mo（111）/C surface.The adsorption energies,equilibrium geometries and vibration frequencies of CH3OH on nine types of sites on the Pt-Mo（111）/C surface were predicted and the favorite adsorption site for methanol is the top-Pt site.Both sites of valence and conduction bands of doped system have been broadened,which are favorable for electrons to transfer to the cavity.The possible decomposition pathway was investigated with transition state searching and the calculation results indicate that the O-H bond is first broken,and then the methanol decomposes into methoxy.The activation barrier of O-H bond breaking with Pt-Mo catalyst is only 104.8 kJ mol-1,showing that carbon supported Pt-Mo alloys have promoted the decomposition of methanol.Comparing with the adsorption energies of CH3OH on the Pt（111）/C surface and that of CO,the adsorption energies of CO are higher,and Pt（111）/C is liable to be oxidized and loses the activity,which suggests that the catalyst Pt-Mo（111）/C is in favor of decomposing methanol and has better anti-poisoning ability than Pt（111）/C.

High index surface‐exposed and composition‐graded PtCu_(3)@Pt_(3)Cu@Pt nanodendrites for high‐performance oxygen reduction

Alloying and nanostructuring are two strategies used to facilitate the efficient electrocatalysis of the oxygen reduction reaction(ORR)by Pt,where the high index surfaces(HISs)of Pt exhibit superior activity for ORR.Here,we report the fabrication of PtCu3 nanodendrites possessing rich spiny branches exposing n(111)×(110)HISs.The dendrites were formed through an etching‐modulated seeding and growing strategy.Specifically,an oxidative atmosphere was initially applied to form the concaved nanocubes of the Pt‐Cu seeds,which was then switched to an inert atmosphere to promote an explosive growth of dendrites.Separately,the oxidative or inert atmosphere failed to produce this hyperbranched structure.Electrochemical dealloying of the PtCu3 nanodendrites produced Pt3Cu shells with Pt‐rich surfaces where HIS‐exposed dendrite structures were maintained.The resulting PtCu_(3)@Pt_(3)Cu@Pt nanodendrites in 0.1 M HClO4 exhibited excellent mass and area specific activities for ORR,which were 14 and 24 times higher than that of commercial Pt/C,respectively.DFT calculations revealed that Cu alloying and HISs both contributed to the significantly enhanced activity of Pt,and that the oxygen binding energy on the step sites of HISs on the PtCu_(3)@Pt_(3)Cu@Pt nanodendrites approached the optimal value to achieve a near peak‐top ORR activity.

Tunable activity of electrocatalytic CO dimerization on strained Cu surfaces:Insights from ab initio molecular dynamics simulations

Controlling catalytic activities through surface strain engineering remains a hot topic in electrocatalysis studies.Herein,ab initio molecular dynamics(AIMD)simulation associated with free energy sampling technology were performed to study the energetics of the key step of producing C2 products in electrocatalytic reduction of CO or CO_(2),i.e.CO dimerization,on strained Cu(100)with an explicit aqueous solvent model.It is worth mentioning that when compressive strain reaches a certain extent,the surface of Cu(100)will undergo reconstruction.We showed that,from tensile to compressive strain,the free energy barrier of CO dimerization decreased,suggesting that the activity of CO dimerization increases.It was also found that some of the reconstructed surfaces showing the lowest free energy barriers but might be less stable can be stabilized in the presence of adsorbed O or CO.Upon detailed quantitative analysis on the charges of surface Cu atoms,we found that the free energy barriers were strongly correlated with the charge of Cu atoms where the OCCO intermediate adsorbs.When the surfaces structures of Cu(100)were altered under compressive strain,the electronic structure of surface Cu atoms was monitored and thus the activity of electrocatalytic CO dimerization can be tuned.

NH_3 Plasma Surface Treatments of Engineering Fluoropolymers: A Way to Enhance Adhesion of Ni or Cu Thin Films Deposited by Electroless Plating

This paper describes the electroless Ni or Cu plating of some fiuoropolymer substrates through a tin-free activation process. Materials subjected to surface metallization are commercial Teflon() FEP, Nafion(), ACLAR() and LaRCTM-CP1 thin films which have recently gained a large scientific and technological interest due to their excellent thermal, chemical, mechanical and dielectric properties. The original approach implemented in the present work involves: (i)the grafting of nitrogen-containing functionalities on the polymer surfaces through plasma treatments in ammonia, (ii) the direct catalysis of the so-modified surfaces via their immersion in a simple acidic PdCl2 solution (i.e. without using a prior surface sensitization in an acidic SnCl2 solution), and finally (iii) the electroless metallization itself. However, prior to the immersion in the industrial plating baths, the chemical reduction of the Pd+2 species (species covalently tethered on the nitrogen-containing groups) to metallic palladium (PdO) is shown to be a key factor in catalyzing the electroless deposition initiation. This is made by immersion in an hypophosphite (H2PO2-) solution. Wettability measurements and X-ray photoelectron spectroscopy (XPS) experiments are used to characterize every surface modification step of the developed process. A cross-hatch tape test was used to asses the adhesion strength of the electroless films that is shown qualitatively good. In addition, a fragmentation test was developed in combination with electrical measurements. Its use allows to distinguish different adhesion levels at the metal/polymer interface and to evidence the influence of some processing parameters.