A novel process for manufacturing A1-0.70Fe-0.24Cu alloy conductor was proposed, which includes horizontal continuous casting and subsequent continuous extrusion forming （Conform）. The mechanical properties, electri...A novel process for manufacturing A1-0.70Fe-0.24Cu alloy conductor was proposed, which includes horizontal continuous casting and subsequent continuous extrusion forming （Conform）. The mechanical properties, electrical conductivity and the compressed creep behaviour of the alloy were studied. The results indicate that the Conform process induces obvious grain refinement, strain-induced precipitation of AI7CuzFe phase and the transformation of crystal orientation distribution. The processed alloy has good comprehensive mechanical properties and electrical conductivity. Moreover, a better creep resistance under the conditions of 90 ~C and 76 MPa is shown compared with pure A1 and annealed copper, and the relationship between primary creep strain and time may comply with the logarithmic law. The enhanced properties are attributed to the grain refinement as well as the fine and homogeneously distributed thermally stable A1Fe and A17Cu2Fe precipitation phases.展开更多
Solidification experiments were carried out in Al-Cu （w（Cu） = 5%） alloy to investigate the influence of pulse magneto-oscillation （PMO） on the efficiency of the Al3Ti1B refining agent at high superheat. The expe...Solidification experiments were carried out in Al-Cu （w（Cu） = 5%） alloy to investigate the influence of pulse magneto-oscillation （PMO） on the efficiency of the Al3Ti1B refining agent at high superheat. The experimental solidification results show that the degree of superheat has remarkable influence on the efficiency of the grain refiner. However, the application of PMO has the potential to reduce the influence of superheat variation on the efficiency of the grain refiner. Finally, the mechanism underlying this phenomenon is discussed by performing a numerical simulation to show the forced flow inside the melt caused by PMO.展开更多
基金Project(20130161110007) supported by the Doctoral Program of Higher Education of China
文摘A novel process for manufacturing A1-0.70Fe-0.24Cu alloy conductor was proposed, which includes horizontal continuous casting and subsequent continuous extrusion forming （Conform）. The mechanical properties, electrical conductivity and the compressed creep behaviour of the alloy were studied. The results indicate that the Conform process induces obvious grain refinement, strain-induced precipitation of AI7CuzFe phase and the transformation of crystal orientation distribution. The processed alloy has good comprehensive mechanical properties and electrical conductivity. Moreover, a better creep resistance under the conditions of 90 ~C and 76 MPa is shown compared with pure A1 and annealed copper, and the relationship between primary creep strain and time may comply with the logarithmic law. The enhanced properties are attributed to the grain refinement as well as the fine and homogeneously distributed thermally stable A1Fe and A17Cu2Fe precipitation phases.
基金The authors gratefully acknowledge the financial support from the National Natural Science Foundation of China （Grant No. 51320105003）, Shanghai Government （Grant No. 14DZ2261200）, and the Science and Technology Commission of Shanghai Municipality （Granted No. 15520710800）.
文摘Solidification experiments were carried out in Al-Cu （w（Cu） = 5%） alloy to investigate the influence of pulse magneto-oscillation （PMO） on the efficiency of the Al3Ti1B refining agent at high superheat. The experimental solidification results show that the degree of superheat has remarkable influence on the efficiency of the grain refiner. However, the application of PMO has the potential to reduce the influence of superheat variation on the efficiency of the grain refiner. Finally, the mechanism underlying this phenomenon is discussed by performing a numerical simulation to show the forced flow inside the melt caused by PMO.
