In this experiment, Cu<sup>2+</sup> doped ZnO (Cu-ZnO) nanorods materials have been fabricated by hydrothermal method. Cu<sup>2+</sup> ions were doped into ZnO with ratios of 2, 5 and 7 mol.% (...In this experiment, Cu<sup>2+</sup> doped ZnO (Cu-ZnO) nanorods materials have been fabricated by hydrothermal method. Cu<sup>2+</sup> ions were doped into ZnO with ratios of 2, 5 and 7 mol.% (compared to the mole’s number of Zn<sup>2+</sup>). The hexamethylenetetramine (HMTA) solvent used for the fabrication of Cu-ZnO nanorods with the mole ratio of Zn<sup>2+</sup>:HMTA = 1:4. The characteristics of the materials were analyzed by techniques, such as XRD, Raman shift, SEM and UV-vis diffuse reflectance spectra (DRS). The photocatalytic properties of the materials were investigated by the decomposition of the methylene blue (MB) dye solution under ultraviolet light. The results show that the size of Cu-ZnO nanorods was reduced when the Cu<sup>2+</sup> doping ratio increased from 2 mol.% to 7 mol.%. The decomposition efficiency of the MB dye solution reached 92% - 97%, corresponding to the Cu<sup>2+</sup> doping ratio changed from 2 - 7 mol.% (after 40 minutes of ultraviolet irradiation). The highest efficiency for the decomposition of the MB solution was obtained at a Cu<sup>2+</sup> doping ratio of 2 mol.%.展开更多
Zn（1-x）Cux O（x=0.00, 0.01, 0.03, and 0.05） nanoparticles are synthesized via the sol-gel technique using gelatin and nitrate precursors. The impact of copper concentration on the structural, optical, and antibacte...Zn（1-x）Cux O（x=0.00, 0.01, 0.03, and 0.05） nanoparticles are synthesized via the sol-gel technique using gelatin and nitrate precursors. The impact of copper concentration on the structural, optical, and antibacterial properties of these nanoparticles is demonstrated. Powder x-ray diffraction investigations have illustrated the organized Cu doping into ZnO nanoparticles up to Cu concentration of 5%（x = 0.05）. However, the peak corresponding to CuO for x= 0.01 is not distinguishable. The images of field emission scanning electron microscopy demonstrate the existence of a nearly spherical shape with a size in the range of 30–52 nm. Doping Cu creates the Cu–O–Zn on the surface and results in a decrease in the crystallite size. Photoluminescence and absorption spectra display that doping Cu causes an increment in the energy band gap. The antibacterial activities of the nanoparticles are examined against Escherichia coli（Gram negative bacteria）cultures using optical density at 600 nm and a comparison of the size of inhibition zone diameter. It is found that both pure and doped ZnO nanoparticles indicate appropriate antibacterial activity which rises with Cu doping.展开更多
Cu-doped TiO2 nanoparticles with different doping contents from 0 to 2.0% （mole fraction） were synthesized through sol-gel method. X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and field emissi...Cu-doped TiO2 nanoparticles with different doping contents from 0 to 2.0% （mole fraction） were synthesized through sol-gel method. X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and field emission scanning electron microscope （FE-SEM） were used to characterize the crystalline structure, chemical valence states and morphology of TiO2 nanoparticles. UV-Vis absorption spectrum was used to measure the optical absorption property of the samples. The photocatalytic performance of the samples was characterized by degrading 20 mg/L methyl orange under UV-Vis irradiation. The results show that the Cu-doped TiO2 nanoparticles exhibit a significant increase in photocatalytic performance over the pure TiO2 nanoparticles, and the TiO2 nanoparticles doped with 1.0% Cu show the best photocatalytic performance. The improvement in photocatalytic performance is attributed to the enhanced light adsorption in UV-Vis range and the decrease of the recombination rate of photoinduced electron-hole oair of the Cu-doped TiO2 nanoparticles.展开更多
ZnO：La3＋,Li＋ nanoparticles were successfully prepared by co-precipitation, citric acid-assisted co-precipitation, co-precipitation combined solid-state reaction and thermal decomposition method. X-ray diffraction ...ZnO：La3＋,Li＋ nanoparticles were successfully prepared by co-precipitation, citric acid-assisted co-precipitation, co-precipitation combined solid-state reaction and thermal decomposition method. X-ray diffraction （XRD）, scanning electron microscopy （SEM） and luminescence spectrophotometry were employed to characterize the crystal phases, particle sizes and luminescence properties of the as-prepared nanopowders. The results indicate that all the prepared samples crystallize in a hexagonal wurtzite structure. The ZnO：La3＋,Li＋ prepared by citric acid-assisted co-precipitation method has a particle size of about 80 nm, which is the smallest among all the samples. Fluorescence （FL） spectra of all samples exhibit three typical emissions： a violet one centered at around 400 nm, blue around 450 nm and 466 rim, and weak green near 520 nm. But the samples prepared by co-precipitation method show a strong and wide green light emission located at about 500 nm. The ZnO：La3＋,Li＋ nanoparticles synthesized by the co-precipitation method demonstrate relatively the strongest emission intensity.展开更多
Here, undoped and Cu doped ZnO nanoparticles(NPs) have been prepared by chemical co-precipitation technique. X-ray diffraction(XRD) results reveal that Cu ions are successfully doped into ZnO matrix without altering i...Here, undoped and Cu doped ZnO nanoparticles(NPs) have been prepared by chemical co-precipitation technique. X-ray diffraction(XRD) results reveal that Cu ions are successfully doped into ZnO matrix without altering its wurtzite phase. The single wurtzite phase of ZnO is retained even for 10 wt% Cu doped ZnO sample. It is observed from the electron microscopy results that higher level of Cu doping varies the morphology of ZnO NPs from spherical to flat NPs. Moreover, the particle size is found to increase with the increase in Cu doping level. Raman spectroscopy results further confirm that Cu dopant has not altered the wurtzite structure of ZnO. Impedance spectroscopy results reveal that the dielectric constant and dielectric loss have increasing trend with Cu doping. Cu doping has been found to slightly decrease the bactericidal potency of ZnO nanoparticles.展开更多
A systematic study of the behaviour of Pd/p-ZnO thin film Schottky diode has been reported.The p-type ZnO thin film with improved stability has been grown on n-type Si by doping ZnO with copper.Seebeck measurement con...A systematic study of the behaviour of Pd/p-ZnO thin film Schottky diode has been reported.The p-type ZnO thin film with improved stability has been grown on n-type Si by doping ZnO with copper.Seebeck measurement confirmed the p-type nature of Cu-doped ZnO thin film.The X-ray diffraction spectra of the deposited film revealed polycrystalline nature with preferred growth orientation of （101） of ZnO film.The surface morphological study demonstrated the conformal deposition of a thin film over n-Si wafer.The estimated bandgap of Cu-doped ptype ZnO thin film from ellipsometric measurement turns out to be 3.14 eV at 300 K.The measured electrical parameters of the proposed Pd/p-ZnO Schottky diode have also been validated by the results of numerical simulation obtained by using ATLAS^（TM） device simulator.展开更多
文摘In this experiment, Cu<sup>2+</sup> doped ZnO (Cu-ZnO) nanorods materials have been fabricated by hydrothermal method. Cu<sup>2+</sup> ions were doped into ZnO with ratios of 2, 5 and 7 mol.% (compared to the mole’s number of Zn<sup>2+</sup>). The hexamethylenetetramine (HMTA) solvent used for the fabrication of Cu-ZnO nanorods with the mole ratio of Zn<sup>2+</sup>:HMTA = 1:4. The characteristics of the materials were analyzed by techniques, such as XRD, Raman shift, SEM and UV-vis diffuse reflectance spectra (DRS). The photocatalytic properties of the materials were investigated by the decomposition of the methylene blue (MB) dye solution under ultraviolet light. The results show that the size of Cu-ZnO nanorods was reduced when the Cu<sup>2+</sup> doping ratio increased from 2 mol.% to 7 mol.%. The decomposition efficiency of the MB dye solution reached 92% - 97%, corresponding to the Cu<sup>2+</sup> doping ratio changed from 2 - 7 mol.% (after 40 minutes of ultraviolet irradiation). The highest efficiency for the decomposition of the MB solution was obtained at a Cu<sup>2+</sup> doping ratio of 2 mol.%.
基金Project supported by the Universiti Teknologi Malaysia(UTM)(Grant No.R.J1300000.7809.4F626)RMC for postdoctoral grants
文摘Zn（1-x）Cux O（x=0.00, 0.01, 0.03, and 0.05） nanoparticles are synthesized via the sol-gel technique using gelatin and nitrate precursors. The impact of copper concentration on the structural, optical, and antibacterial properties of these nanoparticles is demonstrated. Powder x-ray diffraction investigations have illustrated the organized Cu doping into ZnO nanoparticles up to Cu concentration of 5%（x = 0.05）. However, the peak corresponding to CuO for x= 0.01 is not distinguishable. The images of field emission scanning electron microscopy demonstrate the existence of a nearly spherical shape with a size in the range of 30–52 nm. Doping Cu creates the Cu–O–Zn on the surface and results in a decrease in the crystallite size. Photoluminescence and absorption spectra display that doping Cu causes an increment in the energy band gap. The antibacterial activities of the nanoparticles are examined against Escherichia coli（Gram negative bacteria）cultures using optical density at 600 nm and a comparison of the size of inhibition zone diameter. It is found that both pure and doped ZnO nanoparticles indicate appropriate antibacterial activity which rises with Cu doping.
基金Project(2010CB631001)supported by the National Basic Research Program of ChinaProject(50871046)supported by the National Natural Science Foundation of China
文摘Cu-doped TiO2 nanoparticles with different doping contents from 0 to 2.0% （mole fraction） were synthesized through sol-gel method. X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and field emission scanning electron microscope （FE-SEM） were used to characterize the crystalline structure, chemical valence states and morphology of TiO2 nanoparticles. UV-Vis absorption spectrum was used to measure the optical absorption property of the samples. The photocatalytic performance of the samples was characterized by degrading 20 mg/L methyl orange under UV-Vis irradiation. The results show that the Cu-doped TiO2 nanoparticles exhibit a significant increase in photocatalytic performance over the pure TiO2 nanoparticles, and the TiO2 nanoparticles doped with 1.0% Cu show the best photocatalytic performance. The improvement in photocatalytic performance is attributed to the enhanced light adsorption in UV-Vis range and the decrease of the recombination rate of photoinduced electron-hole oair of the Cu-doped TiO2 nanoparticles.
基金Project(50972166) supported by the National Natural Science Foundation of China
文摘ZnO：La3＋,Li＋ nanoparticles were successfully prepared by co-precipitation, citric acid-assisted co-precipitation, co-precipitation combined solid-state reaction and thermal decomposition method. X-ray diffraction （XRD）, scanning electron microscopy （SEM） and luminescence spectrophotometry were employed to characterize the crystal phases, particle sizes and luminescence properties of the as-prepared nanopowders. The results indicate that all the prepared samples crystallize in a hexagonal wurtzite structure. The ZnO：La3＋,Li＋ prepared by citric acid-assisted co-precipitation method has a particle size of about 80 nm, which is the smallest among all the samples. Fluorescence （FL） spectra of all samples exhibit three typical emissions： a violet one centered at around 400 nm, blue around 450 nm and 466 rim, and weak green near 520 nm. But the samples prepared by co-precipitation method show a strong and wide green light emission located at about 500 nm. The ZnO：La3＋,Li＋ nanoparticles synthesized by the co-precipitation method demonstrate relatively the strongest emission intensity.
基金funded by the Higher Education Commission, Pakistan (HEC) IPFP (Grant No. PM-IPFP/HRD/HEC/2011/3386)funding for HEC Ph.D. Scholar (Tariq Jan)
文摘Here, undoped and Cu doped ZnO nanoparticles(NPs) have been prepared by chemical co-precipitation technique. X-ray diffraction(XRD) results reveal that Cu ions are successfully doped into ZnO matrix without altering its wurtzite phase. The single wurtzite phase of ZnO is retained even for 10 wt% Cu doped ZnO sample. It is observed from the electron microscopy results that higher level of Cu doping varies the morphology of ZnO NPs from spherical to flat NPs. Moreover, the particle size is found to increase with the increase in Cu doping level. Raman spectroscopy results further confirm that Cu dopant has not altered the wurtzite structure of ZnO. Impedance spectroscopy results reveal that the dielectric constant and dielectric loss have increasing trend with Cu doping. Cu doping has been found to slightly decrease the bactericidal potency of ZnO nanoparticles.
文摘A systematic study of the behaviour of Pd/p-ZnO thin film Schottky diode has been reported.The p-type ZnO thin film with improved stability has been grown on n-type Si by doping ZnO with copper.Seebeck measurement confirmed the p-type nature of Cu-doped ZnO thin film.The X-ray diffraction spectra of the deposited film revealed polycrystalline nature with preferred growth orientation of （101） of ZnO film.The surface morphological study demonstrated the conformal deposition of a thin film over n-Si wafer.The estimated bandgap of Cu-doped ptype ZnO thin film from ellipsometric measurement turns out to be 3.14 eV at 300 K.The measured electrical parameters of the proposed Pd/p-ZnO Schottky diode have also been validated by the results of numerical simulation obtained by using ATLAS^（TM） device simulator.
