This research manuscript reports the heavy metal accumulation in four marine seaweeds sp. 1)?Caulerpa sertlatioides (Cuba);2) Caulerpa cf. brachypus;(Bali, Indonesia);3) Undaria pinnatifida (West-Donegal, Ireland);4) ...This research manuscript reports the heavy metal accumulation in four marine seaweeds sp. 1)?Caulerpa sertlatioides (Cuba);2) Caulerpa cf. brachypus;(Bali, Indonesia);3) Undaria pinnatifida (West-Donegal, Ireland);4) Ulva lactuca (Easters-Scheldt, the Netherlands). Mechanical pressure at 10 bar of fresh seaweed fronds casu quo biomass in the laboratory delivered seaweed moisture which was analyzed by Inductively Coupled Plasma Spectroscopy (ICP)-techniques for heavy-metals = [HM], (Al, As, Cd, Co, Cr, Cu, Fe, Mo, Ni, Pb & Zn). Three important observations were made: 1) The [HM] in the seaweed moisture is higher than in the surrounding seawater which directs to mechanism(s) of bio-accumulation;2) The accumulation factor [AF] is varying per metallic-cation with an overall trend for our four seaweeds and sampling locations for [HM] are: As & Co & Cu: 5000 - 10,000 μg/l;Ni & Zn: 3000 - 5000 μg/l;Cd: 2000 - 3000 μg/l;Cr: 1000 - 2000 μg/l;Al: 200 - 1000 μg/l;Mo & Pb & Fe: 0 - 200 μg/l range. 3) Seaweed moisture detected that [HM]: Pb & Zn & Fe—which all three could not be detected in the seawater—supports the view that seaweeds have a preference in their bio-accumulation mechanism for these three HM. Major conclusion is in general that “overall” for the macro-elements Ca, Fe, K, Mg, Mn, Na, P & S in the moisture of the four seaweed species the concentration is lower in the seaweed species, or equals the concentration, in comparison to the surrounding sea water. For the HM (Al, As, Cd, Co, Cr, Cu, Mo, Ni, Pb & Zn) the opposite is the case species and is the concentration “overall” higher in the seaweed species in comparison to the surrounding sea water. Further topics addressed include strategies of irrigation of the Sahara desert with the moisture out of seaweeds under conditions of low anthropogenic influences.展开更多
用自制的销环式腐蚀磨损试验机测定了 Fe-Ni-Cr(Mo,Cu)合金在20%H_2SO_4溶液中腐蚀、阴保、钝化及过钝化等电位区的腐蚀磨损-载荷关系,用 SEM 观察了磨痕。结果表明,材料流失量远大于18-8不锈钢,而且主要是磨损造成的。合金中 Ni 的含量...用自制的销环式腐蚀磨损试验机测定了 Fe-Ni-Cr(Mo,Cu)合金在20%H_2SO_4溶液中腐蚀、阴保、钝化及过钝化等电位区的腐蚀磨损-载荷关系,用 SEM 观察了磨痕。结果表明,材料流失量远大于18-8不锈钢,而且主要是磨损造成的。合金中 Ni 的含量高,降低了形变强化能力,是耐磨性下降的原因。展开更多
文摘This research manuscript reports the heavy metal accumulation in four marine seaweeds sp. 1)?Caulerpa sertlatioides (Cuba);2) Caulerpa cf. brachypus;(Bali, Indonesia);3) Undaria pinnatifida (West-Donegal, Ireland);4) Ulva lactuca (Easters-Scheldt, the Netherlands). Mechanical pressure at 10 bar of fresh seaweed fronds casu quo biomass in the laboratory delivered seaweed moisture which was analyzed by Inductively Coupled Plasma Spectroscopy (ICP)-techniques for heavy-metals = [HM], (Al, As, Cd, Co, Cr, Cu, Fe, Mo, Ni, Pb & Zn). Three important observations were made: 1) The [HM] in the seaweed moisture is higher than in the surrounding seawater which directs to mechanism(s) of bio-accumulation;2) The accumulation factor [AF] is varying per metallic-cation with an overall trend for our four seaweeds and sampling locations for [HM] are: As & Co & Cu: 5000 - 10,000 μg/l;Ni & Zn: 3000 - 5000 μg/l;Cd: 2000 - 3000 μg/l;Cr: 1000 - 2000 μg/l;Al: 200 - 1000 μg/l;Mo & Pb & Fe: 0 - 200 μg/l range. 3) Seaweed moisture detected that [HM]: Pb & Zn & Fe—which all three could not be detected in the seawater—supports the view that seaweeds have a preference in their bio-accumulation mechanism for these three HM. Major conclusion is in general that “overall” for the macro-elements Ca, Fe, K, Mg, Mn, Na, P & S in the moisture of the four seaweed species the concentration is lower in the seaweed species, or equals the concentration, in comparison to the surrounding sea water. For the HM (Al, As, Cd, Co, Cr, Cu, Mo, Ni, Pb & Zn) the opposite is the case species and is the concentration “overall” higher in the seaweed species in comparison to the surrounding sea water. Further topics addressed include strategies of irrigation of the Sahara desert with the moisture out of seaweeds under conditions of low anthropogenic influences.
文摘用自制的销环式腐蚀磨损试验机测定了 Fe-Ni-Cr(Mo,Cu)合金在20%H_2SO_4溶液中腐蚀、阴保、钝化及过钝化等电位区的腐蚀磨损-载荷关系,用 SEM 观察了磨痕。结果表明,材料流失量远大于18-8不锈钢,而且主要是磨损造成的。合金中 Ni 的含量高,降低了形变强化能力,是耐磨性下降的原因。
