Copper-based nanomaterials have been widely used in catalysis,electrodes,and other applications due to their unique electron-transfer properties.In this work,an efficient electrochemical sensor based on an electrode m...Copper-based nanomaterials have been widely used in catalysis,electrodes,and other applications due to their unique electron-transfer properties.In this work,an efficient electrochemical sensor based on an electrode modified with one-dimensional Cu(OH)_(2)/carboxymethyl cellulose(CMC)composite nanofibers was fabricated and investigated for the detection of aspirin.Scanning electron microscopy was employed to examine the morphological characteristics of these composite nanofibers.Cyclic voltammetry and electrochemical impedance spectroscopy were used to assess the electrochemical performance of a Cu(OH)_(2)/CMC composite nanofiber-modified electrode.The findings indicate that the modified electrode has a very high sensitivity to aspirin.The observed enhanced performance could be a result of the high surface-to-volume ratio of the composite nanofibers and their superior electron-transport characteristics,which may hasten electron transfer between aspirin and the surfaces of the modified electrode.This detection technique also demonstrated strong selectivity for aspirin.These findings imply that the technique can be applied as a highly effective and selective approach to aspirin measurement in biological science.展开更多
Cu2ZnSnS4 (CZTS) thin films were successfully prepared by sulfurization of ion bean sputtered precursors on soda-lime glass substrate. The single phase of stannite-type structure CZTS films were obtained as revealed i...Cu2ZnSnS4 (CZTS) thin films were successfully prepared by sulfurization of ion bean sputtered precursors on soda-lime glass substrate. The single phase of stannite-type structure CZTS films were obtained as revealed in EDS and XRD analysis when the ratios of the constituents of CZTS thin films are close to stoichiometric by optimizing the conditions of precursor preparation and sulfurization. A low sheet resistivity as about 0.156 Ω·cm and a high absorption coefficient as 1×104 cm-1 were achieved in this method by Hall effect measurements and UV-VIS spectrophotometer. The optical band-gap energy of the CZTS sample is about 1.51 eV, which is very close to the optimum value for a solar-cell absorber.展开更多
We improved the photovoltaic properties of Cu_2O-based heterojunction solar cells using n-type oxide semiconductor thin films prepared by a sputtering apparatus with our newly developed multi-chamber system. We also o...We improved the photovoltaic properties of Cu_2O-based heterojunction solar cells using n-type oxide semiconductor thin films prepared by a sputtering apparatus with our newly developed multi-chamber system. We also obtained the highest efficiency(3.21%) in an AZO/p-Cu_2O heterojunction solar cell prepared with optimized pre-sputtering conditions using our newly developed multi-chamber sputtering system. This value achieves the same or higher characteristics than AZO/Cu_2O solar cells with a similar structure prepared by the pulse laser deposition method.展开更多
In this study, we have explored the ways to fabricate and optimize high-quality ultrathin YBa2 Cu3 O7-δ(YBCO) films grown on single-crystal(001) SrTiO3 substrates. Nearly atomic-flat YBCO films are obtained by pulsed...In this study, we have explored the ways to fabricate and optimize high-quality ultrathin YBa2 Cu3 O7-δ(YBCO) films grown on single-crystal(001) SrTiO3 substrates. Nearly atomic-flat YBCO films are obtained by pulsed laser deposition.Our result shows that the termination of SrTiO3 has only a negligible effect on the properties of YBCO. In contrast, we found that capping a non-superconducting oxide layer can generally enhance the superconductivity of YBCO. PrBa2 Cu3 O7,La2 CuO4, LaMnO3, SrTiO3, and LaAlO3 have been examined as capping layers, and the minimum thickness of superconducting YBCO with capping is ~ 2 unit cells–3 unit cells. This result might be useful in constructing good-performance YBCO-based field effect devices.展开更多
Thin films of copper indium gallium selenide Cu(In,Ga)Se2 (CIGS) were prepared by sequential elemental layer deposition in vacuum at room temperature. The as-deposited films were heated in vacuum for compound form...Thin films of copper indium gallium selenide Cu(In,Ga)Se2 (CIGS) were prepared by sequential elemental layer deposition in vacuum at room temperature. The as-deposited films were heated in vacuum for compound formation, and were studied at temperature as high as 1250℃ for the first time. These films were concurrently studied for their structural properties by X-ray diffraction (XRD) technique. The XRD analyses include phase transition studies, grain size variation and microstrain measurements with the reaction temperature and time.It has been observed that there are three distinct regions of variation in all these parameters. These regions belong to three temperature regimes: 〈450℃, 450-950℃, and 〉950℃. It is also seen that the compound formation starts at 250℃, with ternary phases appearing at 350℃ or above. Whereas, there is another phase shift at 950℃ without any preference to the quaternary compound.展开更多
YBa2Cu3O7-x(YBCO) films with co-doping BaTiO3(BTO) and Y2O3 nanostructures were prepared by metal organic deposition using trifluoroacetates(TFA-MOD). The properties of the BTO/Y2O3co-doped YBCO films with diffe...YBa2Cu3O7-x(YBCO) films with co-doping BaTiO3(BTO) and Y2O3 nanostructures were prepared by metal organic deposition using trifluoroacetates(TFA-MOD). The properties of the BTO/Y2O3co-doped YBCO films with different excess yttrium have been systematically studied by x-ray diffraction(XRD), Raman spectra, and scanning electron microscope(SEM). The optimized content of yttrium excess in the BTO/Y2O3co-doped YBCO films is 10 mol.%, and the critical current density is as high as - 17 mA/cm^2(self-field, 65 K) by the magnetic signal. In addition, the Y2Cu2O5 was formed when the content of yttrium excess increases to 24 mol.%, which may result in the deterioration of the superconducting properties and the microstructure. The unique combination of the different types of nanostructures of BTO and Y2O3 in the doped YBCO films, compared with the pure YBCO films and BTO doped YBCO films, enhances the critical current density(JC) not only at the self-magnetic field, but also in the applied magnetic field.展开更多
The Cu<sub>2</sub>O thin films were synthesized by using RF sputtering technique. Comparisons were made with films created by deposition at room temperature followed by thermal annealing between 100°C...The Cu<sub>2</sub>O thin films were synthesized by using RF sputtering technique. Comparisons were made with films created by deposition at room temperature followed by thermal annealing between 100°C and 400°C and using different gases, oxygen (O<sub>2</sub>) (oxidizing and reactive gas) and nitrogen (N<sub>2</sub>) (inert gas), besides air. The thickness of the thin films was kept constant, around 2000 <span style="white-space:nowrap;"><span style="white-space:nowrap;">Å</span></span> (Angstrom). In addition, the RF power and pressure deposition were kept constant, as well. The thin films were evaluated for a range of wavelengths between 200 nm and 400 nm (Ultra Violet spectrum), 400 nm and 700 nm (Visible spectrum), 700 nm and 800 nm (Infrared spectrum) for both, optical transmittance and photoluminescence. From the experimental results, the higher annealing temperature and the introduction of nitrogen (N<sub>2</sub>) gas produced the following results: the optical bandgap for the Cu<sub>2</sub>O was found to be 2.23 eV and photoluminescence peaks were around 551 nm and 555 nm, which matched the theoretical analyses. Overall, there was a decrease in the optical bandgap of the Cu<sub>2</sub>O from 2.56 eV at room temperature to 2.23 eV for the film annealed in nitrogen gas at 400°C. This indicates that the Cu<sub>2</sub>O is a potential candidate in solar cell applications.展开更多
Excellent epitaxial growth of supercon-ducting YBaCuOthin films have beenrealized on(100)SrTiOand(100)ZrOsubstrates by a planar rf or DC-magnetronsputtering apparatus with UHV system.Thequality of growth and the epita...Excellent epitaxial growth of supercon-ducting YBaCuOthin films have beenrealized on(100)SrTiOand(100)ZrOsubstrates by a planar rf or DC-magnetronsputtering apparatus with UHV system.Thequality of growth and the epitaxial orientationof the film strongly depended on substratetemperature,the substrate orientation and ox-ygen partial pressure.The films exhibitedsuperconducting onset at 92K and zero resist-ance at 90K with critical current density of展开更多
The bonding and electronic structure of Cu/(0001)Al2O3 and Cu/(1120)Al2O3 interfaces has been studied experimentally using spatially-resolved transmission electron energy loss spectroscopy. The specimen were prepared ...The bonding and electronic structure of Cu/(0001)Al2O3 and Cu/(1120)Al2O3 interfaces has been studied experimentally using spatially-resolved transmission electron energy loss spectroscopy. The specimen were prepared by depositing Cu on single-crystal α-AI2O3 substrates, which have been Ar+-ion sputter-cleaned prior to the growth of Cu. For both orientations of the α-Al2O3 substrate, atomically abrupt interfaces formed as determined by high-resolution transmission electron microscopy. The investigations of the interfacial Cu-L2,3, Al-L2,3 and 0-K energy loss near-edge structures, which are proportional to the site- and angular-momentum-projected unoccupied density of states above the Fermi level, indicate the existence of metallic Cu-AI bonds at the Cu/AI2O3 interface independent of the substrate orientation.展开更多
Copper sulfide thin films are deposited onto different substrates at room temperature using the thermal evaporation technique. X-ray diffraction spectra show that the film has an orthorhombicchalcocite (7-Cu2S) phas...Copper sulfide thin films are deposited onto different substrates at room temperature using the thermal evaporation technique. X-ray diffraction spectra show that the film has an orthorhombicchalcocite (7-Cu2S) phase. The atomic force microscopy images indicate that the film exhibits nanoparticles with an average size of nearly 44 nm. Specrtophotometric measurements for the transmittance and reflectance are carried out at normal incidence in a spectral wavelength range of 450 nm-2500 nm. The refractive index, n, as well as the absorption index, k is calculated. Some dispersion parameters are determined. The analyses of el and e2 reveal several absorption peaks. The analysis of the spectral behavior of the absorption coefficient, c~, in the absorption region reveals direct and indirect allowed transitions. The dark electrical resistivity is studied as a function of film thickness and temperature. Tellier's model is adopted for determining the mean free path and bulk resistance.展开更多
Zn/Sn/Cu (CZT) stacks were prepared by RF magnetron sputtering. The stacks were pretreated at different tem- peratures (200℃, 300 ℃, 350 ℃, and 400 ℃) for 0.5 h and then followed by sulfurization at 500℃ for ...Zn/Sn/Cu (CZT) stacks were prepared by RF magnetron sputtering. The stacks were pretreated at different tem- peratures (200℃, 300 ℃, 350 ℃, and 400 ℃) for 0.5 h and then followed by sulfurization at 500℃ for 2 h. Then, the structures, morphologies, and optical properties of the as-obtained Cu2ZnSnS4 (CZTS) films were studied by x-ray diffraction (XRD), Raman spectroscopy, UV-Vis-NIR, scanning electron microscope (SEM), and energy-dispersive x-ray spectroscopy (EDX). The XRD and Raman spectroscopy results indicated that the sample pretreated at 350℃ had no secondary phase and good crystallization. At the same time, SEM confirmed that it had large and dense grains. According to the UV-Vis-NIR spectrum, the sample had an absorption coefficient larger than 10^4 cm-1 in the visible light range and a band gap close to 1.5 eV.展开更多
The strain effect on the critical current is one of the most important properties for polycrystalline YBa2 Cu3O7-δ (REBCO, RE: rare earth) films, in which the reversible effect is intrinsic in the range of strain ...The strain effect on the critical current is one of the most important properties for polycrystalline YBa2 Cu3O7-δ (REBCO, RE: rare earth) films, in which the reversible effect is intrinsic in the range of strain 0 and the irreversible strain εirr. By introducing the applied strain, a modified grain boundaries (GBs) in the REBCO film is developed. lattice model combining the strain and misorientation of A good agreement of the calculation on the lattice model with the experimental data shows that the lattice model is able to well describe the reversible effect of axial strain on the critical current of the REBCO film, and provides a good understanding of the mechanism of the reversible effect of the strain. Moreover, the effects of the crystallographic texture of the REBCO film and the residual strain εr on the variation of the critical current with the applied strain are extensively investigated. Furthermore by using the developed lattice model, the irreversible strain εirr of the REBCO film can be theoretically determined by comparing the calculation of the critical current-strain curve with the experimental data.展开更多
We perform molecular beam epitaxy growth and scanning tunneling microscopy study of copper diselenide (CuSe2 ) films on SrTiO3 (001). Using a Se-rich condition, the single-phase pyrite CuSe2 grows in the Stranski-...We perform molecular beam epitaxy growth and scanning tunneling microscopy study of copper diselenide (CuSe2 ) films on SrTiO3 (001). Using a Se-rich condition, the single-phase pyrite CuSe2 grows in the Stranski-Krastanov (layer-plus-island) mode with a preferential orientation of (111). Our careful inspection of both the as-grown and post-annealed CuSe2 films at various temperatures invariably shows a Cu-terminated surface, which, depending on the annealing temperature, reconstructs into two distinct structures 2 ×√3 and √x ×√3-R30°. The Cu termi- nation is supported by the depressed density of states near the Fermi level, measured by in-situ low temperature scanning tunneling spectroscopy. Our study helps understand the preparation and surface chemistry of transition metal pyrite dichalcogenides thin films.展开更多
High Ga content Cu(In,Ga)Se2 thin films incorporated sulfur were prepared by sequential evaporation from CuGaSe2 and CuInSe2 ternary compounds and subsequently Ga2Se3, In2Se3 and In2S3 binary compounds. The In2S3/(Ga2...High Ga content Cu(In,Ga)Se2 thin films incorporated sulfur were prepared by sequential evaporation from CuGaSe2 and CuInSe2 ternary compounds and subsequently Ga2Se3, In2Se3 and In2S3 binary compounds. The In2S3/(Ga2Se3+ In2Se3) ratio was varied from 0 to 0.13, and the properties of the thin films were investigated. XRD studies demonstrated that the prepared thin films had a chalcopyrite Cu(In,Ga)Se2 structure. The S/(Se+S) mole ratio in the thin films was within the range from 0 to 0.04. The band gaps of Cu(In,Ga)Se2 thin films increased from 1.30 eV to 1.59 eV with increasing the ?In2S3 /(Ga2Se3+ In2Se3) ratio.展开更多
Cux(Cu2O)1-x(0.09 x 1.00) granular films with thickness about 280 nm have been fabricated by direct current reactive magnetron sputtering. The atomic ratio x can be controlled by the oxygen flow rate during Cux(C...Cux(Cu2O)1-x(0.09 x 1.00) granular films with thickness about 280 nm have been fabricated by direct current reactive magnetron sputtering. The atomic ratio x can be controlled by the oxygen flow rate during Cux(Cu2O)1-x deposition. Room-temperature ferromagnetism(FM) is found in all of the samples. The saturated magnetization increases at first and then decreases with the decrease of x. The photoluminescence spectra show that the magnetization is closely correlated with the Cu vacancies in the Cux(Cu2O)1-x granular films. Fundamentally, the FM could be understood by the Stoner model based on the charge transfer mechanism. These results may provide solid evidence and physical insights on the origin of FM in the Cu2O-based oxides diluted magnetic semiconductors, especially for systems without intentional magnetic atom doping.展开更多
基金The authors wish to acknowledge financial support from the Science and Technology Projects in Jilin Province Department of Education(Grant No.JJKH20220239KJ).
文摘Copper-based nanomaterials have been widely used in catalysis,electrodes,and other applications due to their unique electron-transfer properties.In this work,an efficient electrochemical sensor based on an electrode modified with one-dimensional Cu(OH)_(2)/carboxymethyl cellulose(CMC)composite nanofibers was fabricated and investigated for the detection of aspirin.Scanning electron microscopy was employed to examine the morphological characteristics of these composite nanofibers.Cyclic voltammetry and electrochemical impedance spectroscopy were used to assess the electrochemical performance of a Cu(OH)_(2)/CMC composite nanofiber-modified electrode.The findings indicate that the modified electrode has a very high sensitivity to aspirin.The observed enhanced performance could be a result of the high surface-to-volume ratio of the composite nanofibers and their superior electron-transport characteristics,which may hasten electron transfer between aspirin and the surfaces of the modified electrode.This detection technique also demonstrated strong selectivity for aspirin.These findings imply that the technique can be applied as a highly effective and selective approach to aspirin measurement in biological science.
基金This work was financially supported by the National Natural Science Foundation (No.10574106), the Science & Technology Plan of Guangdong Province (No.2003C105005) and the Scientific Research Foundation for the Returned Overseas Chinese Scholars of Chinese State Education Ministry (No.(2004)176).
文摘Cu2ZnSnS4 (CZTS) thin films were successfully prepared by sulfurization of ion bean sputtered precursors on soda-lime glass substrate. The single phase of stannite-type structure CZTS films were obtained as revealed in EDS and XRD analysis when the ratios of the constituents of CZTS thin films are close to stoichiometric by optimizing the conditions of precursor preparation and sulfurization. A low sheet resistivity as about 0.156 Ω·cm and a high absorption coefficient as 1×104 cm-1 were achieved in this method by Hall effect measurements and UV-VIS spectrophotometer. The optical band-gap energy of the CZTS sample is about 1.51 eV, which is very close to the optimum value for a solar-cell absorber.
基金partly supported by Grant-in-Aid for Scientific Research on Innovative Areas from the Ministry of Education, Culture, Sports, Science and Technology of Japan (No.15K04723)
文摘We improved the photovoltaic properties of Cu_2O-based heterojunction solar cells using n-type oxide semiconductor thin films prepared by a sputtering apparatus with our newly developed multi-chamber system. We also obtained the highest efficiency(3.21%) in an AZO/p-Cu_2O heterojunction solar cell prepared with optimized pre-sputtering conditions using our newly developed multi-chamber sputtering system. This value achieves the same or higher characteristics than AZO/Cu_2O solar cells with a similar structure prepared by the pulse laser deposition method.
基金Project supported by the National Key Research and Development Program of the Ministry of Science and Technology of China(Grants Nos.2017YFA0303002and 2016YFA0300204)the Fundamental Research Funds for the Central Universities,China
文摘In this study, we have explored the ways to fabricate and optimize high-quality ultrathin YBa2 Cu3 O7-δ(YBCO) films grown on single-crystal(001) SrTiO3 substrates. Nearly atomic-flat YBCO films are obtained by pulsed laser deposition.Our result shows that the termination of SrTiO3 has only a negligible effect on the properties of YBCO. In contrast, we found that capping a non-superconducting oxide layer can generally enhance the superconductivity of YBCO. PrBa2 Cu3 O7,La2 CuO4, LaMnO3, SrTiO3, and LaAlO3 have been examined as capping layers, and the minimum thickness of superconducting YBCO with capping is ~ 2 unit cells–3 unit cells. This result might be useful in constructing good-performance YBCO-based field effect devices.
文摘Thin films of copper indium gallium selenide Cu(In,Ga)Se2 (CIGS) were prepared by sequential elemental layer deposition in vacuum at room temperature. The as-deposited films were heated in vacuum for compound formation, and were studied at temperature as high as 1250℃ for the first time. These films were concurrently studied for their structural properties by X-ray diffraction (XRD) technique. The XRD analyses include phase transition studies, grain size variation and microstrain measurements with the reaction temperature and time.It has been observed that there are three distinct regions of variation in all these parameters. These regions belong to three temperature regimes: 〈450℃, 450-950℃, and 〉950℃. It is also seen that the compound formation starts at 250℃, with ternary phases appearing at 350℃ or above. Whereas, there is another phase shift at 950℃ without any preference to the quaternary compound.
基金Project supported by the National Natural Science Foundation of China(Grant No.51272250)the National Basic Research Program of China(Grant No.2011CBA00105)+1 种基金the National High Technology Research and Development Program of China(Grant No.2014AA032702)the Natural Science Foundation of Beijing,China(Grant No.2152035)
文摘YBa2Cu3O7-x(YBCO) films with co-doping BaTiO3(BTO) and Y2O3 nanostructures were prepared by metal organic deposition using trifluoroacetates(TFA-MOD). The properties of the BTO/Y2O3co-doped YBCO films with different excess yttrium have been systematically studied by x-ray diffraction(XRD), Raman spectra, and scanning electron microscope(SEM). The optimized content of yttrium excess in the BTO/Y2O3co-doped YBCO films is 10 mol.%, and the critical current density is as high as - 17 mA/cm^2(self-field, 65 K) by the magnetic signal. In addition, the Y2Cu2O5 was formed when the content of yttrium excess increases to 24 mol.%, which may result in the deterioration of the superconducting properties and the microstructure. The unique combination of the different types of nanostructures of BTO and Y2O3 in the doped YBCO films, compared with the pure YBCO films and BTO doped YBCO films, enhances the critical current density(JC) not only at the self-magnetic field, but also in the applied magnetic field.
文摘The Cu<sub>2</sub>O thin films were synthesized by using RF sputtering technique. Comparisons were made with films created by deposition at room temperature followed by thermal annealing between 100°C and 400°C and using different gases, oxygen (O<sub>2</sub>) (oxidizing and reactive gas) and nitrogen (N<sub>2</sub>) (inert gas), besides air. The thickness of the thin films was kept constant, around 2000 <span style="white-space:nowrap;"><span style="white-space:nowrap;">Å</span></span> (Angstrom). In addition, the RF power and pressure deposition were kept constant, as well. The thin films were evaluated for a range of wavelengths between 200 nm and 400 nm (Ultra Violet spectrum), 400 nm and 700 nm (Visible spectrum), 700 nm and 800 nm (Infrared spectrum) for both, optical transmittance and photoluminescence. From the experimental results, the higher annealing temperature and the introduction of nitrogen (N<sub>2</sub>) gas produced the following results: the optical bandgap for the Cu<sub>2</sub>O was found to be 2.23 eV and photoluminescence peaks were around 551 nm and 555 nm, which matched the theoretical analyses. Overall, there was a decrease in the optical bandgap of the Cu<sub>2</sub>O from 2.56 eV at room temperature to 2.23 eV for the film annealed in nitrogen gas at 400°C. This indicates that the Cu<sub>2</sub>O is a potential candidate in solar cell applications.
文摘Excellent epitaxial growth of supercon-ducting YBaCuOthin films have beenrealized on(100)SrTiOand(100)ZrOsubstrates by a planar rf or DC-magnetronsputtering apparatus with UHV system.Thequality of growth and the epitaxial orientationof the film strongly depended on substratetemperature,the substrate orientation and ox-ygen partial pressure.The films exhibitedsuperconducting onset at 92K and zero resist-ance at 90K with critical current density of
文摘The bonding and electronic structure of Cu/(0001)Al2O3 and Cu/(1120)Al2O3 interfaces has been studied experimentally using spatially-resolved transmission electron energy loss spectroscopy. The specimen were prepared by depositing Cu on single-crystal α-AI2O3 substrates, which have been Ar+-ion sputter-cleaned prior to the growth of Cu. For both orientations of the α-Al2O3 substrate, atomically abrupt interfaces formed as determined by high-resolution transmission electron microscopy. The investigations of the interfacial Cu-L2,3, Al-L2,3 and 0-K energy loss near-edge structures, which are proportional to the site- and angular-momentum-projected unoccupied density of states above the Fermi level, indicate the existence of metallic Cu-AI bonds at the Cu/AI2O3 interface independent of the substrate orientation.
文摘Copper sulfide thin films are deposited onto different substrates at room temperature using the thermal evaporation technique. X-ray diffraction spectra show that the film has an orthorhombicchalcocite (7-Cu2S) phase. The atomic force microscopy images indicate that the film exhibits nanoparticles with an average size of nearly 44 nm. Specrtophotometric measurements for the transmittance and reflectance are carried out at normal incidence in a spectral wavelength range of 450 nm-2500 nm. The refractive index, n, as well as the absorption index, k is calculated. Some dispersion parameters are determined. The analyses of el and e2 reveal several absorption peaks. The analysis of the spectral behavior of the absorption coefficient, c~, in the absorption region reveals direct and indirect allowed transitions. The dark electrical resistivity is studied as a function of film thickness and temperature. Tellier's model is adopted for determining the mean free path and bulk resistance.
基金supported by Funding for Outstanding Doctoral Dissertation in NUAA,China(Grant No.BCXJ13-12)the Jiangsu Innovation Program for Graduate Education,China(Grant No.CXLX13 150)+2 种基金the Fundamental Research Funds for the Central Universities,China(Grant No.61176062)the Science and Technology Supporting Project of Jiangsu Province,China(Grant No.BE2012103)the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘Zn/Sn/Cu (CZT) stacks were prepared by RF magnetron sputtering. The stacks were pretreated at different tem- peratures (200℃, 300 ℃, 350 ℃, and 400 ℃) for 0.5 h and then followed by sulfurization at 500℃ for 2 h. Then, the structures, morphologies, and optical properties of the as-obtained Cu2ZnSnS4 (CZTS) films were studied by x-ray diffraction (XRD), Raman spectroscopy, UV-Vis-NIR, scanning electron microscope (SEM), and energy-dispersive x-ray spectroscopy (EDX). The XRD and Raman spectroscopy results indicated that the sample pretreated at 350℃ had no secondary phase and good crystallization. At the same time, SEM confirmed that it had large and dense grains. According to the UV-Vis-NIR spectrum, the sample had an absorption coefficient larger than 10^4 cm-1 in the visible light range and a band gap close to 1.5 eV.
基金Supported by the National Natural Science Foundation of China under Grant No 11372096the Research Fund for the Doctoral Program of Higher Education of China
文摘The strain effect on the critical current is one of the most important properties for polycrystalline YBa2 Cu3O7-δ (REBCO, RE: rare earth) films, in which the reversible effect is intrinsic in the range of strain 0 and the irreversible strain εirr. By introducing the applied strain, a modified grain boundaries (GBs) in the REBCO film is developed. lattice model combining the strain and misorientation of A good agreement of the calculation on the lattice model with the experimental data shows that the lattice model is able to well describe the reversible effect of axial strain on the critical current of the REBCO film, and provides a good understanding of the mechanism of the reversible effect of the strain. Moreover, the effects of the crystallographic texture of the REBCO film and the residual strain εr on the variation of the critical current with the applied strain are extensively investigated. Furthermore by using the developed lattice model, the irreversible strain εirr of the REBCO film can be theoretically determined by comparing the calculation of the critical current-strain curve with the experimental data.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11374336 and 61176078
文摘We perform molecular beam epitaxy growth and scanning tunneling microscopy study of copper diselenide (CuSe2 ) films on SrTiO3 (001). Using a Se-rich condition, the single-phase pyrite CuSe2 grows in the Stranski-Krastanov (layer-plus-island) mode with a preferential orientation of (111). Our careful inspection of both the as-grown and post-annealed CuSe2 films at various temperatures invariably shows a Cu-terminated surface, which, depending on the annealing temperature, reconstructs into two distinct structures 2 ×√3 and √x ×√3-R30°. The Cu termi- nation is supported by the depressed density of states near the Fermi level, measured by in-situ low temperature scanning tunneling spectroscopy. Our study helps understand the preparation and surface chemistry of transition metal pyrite dichalcogenides thin films.
文摘High Ga content Cu(In,Ga)Se2 thin films incorporated sulfur were prepared by sequential evaporation from CuGaSe2 and CuInSe2 ternary compounds and subsequently Ga2Se3, In2Se3 and In2S3 binary compounds. The In2S3/(Ga2Se3+ In2Se3) ratio was varied from 0 to 0.13, and the properties of the thin films were investigated. XRD studies demonstrated that the prepared thin films had a chalcopyrite Cu(In,Ga)Se2 structure. The S/(Se+S) mole ratio in the thin films was within the range from 0 to 0.04. The band gaps of Cu(In,Ga)Se2 thin films increased from 1.30 eV to 1.59 eV with increasing the ?In2S3 /(Ga2Se3+ In2Se3) ratio.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11104148,51101088,and 51171082)the Tianjin Natural Science Foundation,China(Grant Nos.14JCZDJC37700 and 13JCQNJC02800)+1 种基金the Specialized Research Fund for the Doctoral Program of Higher Education,China(Grant No.20110031110034)the Fundamental Research Funds for the Central Universities,China
文摘Cux(Cu2O)1-x(0.09 x 1.00) granular films with thickness about 280 nm have been fabricated by direct current reactive magnetron sputtering. The atomic ratio x can be controlled by the oxygen flow rate during Cux(Cu2O)1-x deposition. Room-temperature ferromagnetism(FM) is found in all of the samples. The saturated magnetization increases at first and then decreases with the decrease of x. The photoluminescence spectra show that the magnetization is closely correlated with the Cu vacancies in the Cux(Cu2O)1-x granular films. Fundamentally, the FM could be understood by the Stoner model based on the charge transfer mechanism. These results may provide solid evidence and physical insights on the origin of FM in the Cu2O-based oxides diluted magnetic semiconductors, especially for systems without intentional magnetic atom doping.