In the present work,the sheets of Zr-1Sn-0.3Nb-0.3Fe-0.1Cr alloy were hot rolled with different reductions(10%,30%,50%,and 60%) at 1023 K and 1073 K.The micro structure evolutions including grain micro structure,textu...In the present work,the sheets of Zr-1Sn-0.3Nb-0.3Fe-0.1Cr alloy were hot rolled with different reductions(10%,30%,50%,and 60%) at 1023 K and 1073 K.The micro structure evolutions including grain micro structure,texture,and dislocation were investigated,using electron backscattering diffraction and transmission electron microscope.The results showed that dislocation slip,twinning,and dynamic recrystallization(DRX) were the main deformation mechanisms.DRX was found to be promoted by larger reduction and higher rolling temperature.The predominant texture formed during hot rolling was basal <0001>//ND,whose intensity reached peak value after 30% reduction hot rolling.While the intensity of DRX texture <10-10>//ND and<1-210>//ND increased with increasing reduction and temperature.This study provided an effective way to tailor the texture and microstructure of the alloy,for optimizing process parameters.展开更多
文摘通过热压缩试验研究了Cu-0.5Cr-0.1Zr合金在600~750℃/0.001~1.0 s^(-1)时的热变形行为。结果表明,Cu-0.5Cr-0.1Zr合金的高温流变应力,动态再结晶临界值和动态再结晶软化效应与变形温度和应变速率密切相关。利用Arrhenius方程计算了Cu-0.5Cr-0.1Zr合金的热激活能Q和Z参数,分别为244.94 k J/mol、Z=εexp(244.94×10^(3)/RT)。采用3种方法进行了动态再结晶临界值的计算,结果证明Poliak-Jonas准则具有最高的精度,并建立了动态再结晶临界值的本构方程。利用动态再结晶的净软化效应η值,讨论了热变形过程中动态再结晶的软化行为。最后,建立了Cu-0.5Cr-0.1Zr合金的热加工图,确定最佳的热加工参数为680~750℃,0.001~0.03 s^(-1),并详细介绍了功率耗散系数与动态再结晶晶粒尺寸之间的关系。
基金financially supported by the National Natural Science Foundation of China (No. U1867201).
文摘In the present work,the sheets of Zr-1Sn-0.3Nb-0.3Fe-0.1Cr alloy were hot rolled with different reductions(10%,30%,50%,and 60%) at 1023 K and 1073 K.The micro structure evolutions including grain micro structure,texture,and dislocation were investigated,using electron backscattering diffraction and transmission electron microscope.The results showed that dislocation slip,twinning,and dynamic recrystallization(DRX) were the main deformation mechanisms.DRX was found to be promoted by larger reduction and higher rolling temperature.The predominant texture formed during hot rolling was basal <0001>//ND,whose intensity reached peak value after 30% reduction hot rolling.While the intensity of DRX texture <10-10>//ND and<1-210>//ND increased with increasing reduction and temperature.This study provided an effective way to tailor the texture and microstructure of the alloy,for optimizing process parameters.
