期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
时效工艺对Cu-1.9Be-0.25Co合金析出行为的影响
1
作者 王磊 葛颂 +5 位作者 郭鹏伟 康军伟 周坚 梁蒙 杨莹 周延军 《机械工程材料》 CAS CSCD 北大核心 2021年第11期8-12,23,共6页
对Cu-1.9Be-0.25Co合金进行780℃×4 h固溶处理与不同温度(300,320,340,360℃)和不同时间(1,2,4,8,16 h)的时效处理,研究了时效工艺对合金析出行为的影响规律。结果表明:获得峰时效的时效工艺为320℃×8 h,此时合金的硬度为422 ... 对Cu-1.9Be-0.25Co合金进行780℃×4 h固溶处理与不同温度(300,320,340,360℃)和不同时间(1,2,4,8,16 h)的时效处理,研究了时效工艺对合金析出行为的影响规律。结果表明:获得峰时效的时效工艺为320℃×8 h,此时合金的硬度为422 HV;在320℃时效过程中合金析出相的演变规律为亚稳γ″相→半共格γ′相→非共格γ平衡相;时效初期(1~2 h)析出相短时间内大量析出是合金硬度快速升高的主要原因,时效中期(2~8 h)析出相与铜基体的半共格关系是获得峰时效的主要原因,时效后期(8\~16 h)析出相和基体脱离半共格关系,合金发生过时效,硬度降低。 展开更多
关键词 cu-1.9be-0.25co合金 时效 硬度 析出相 半共格关系
下载PDF
电梯安全钳用Cu-1.9Be-0.25Co合金高温拉伸行为研究 被引量:3
2
作者 周延军 高芳 +5 位作者 张文敏 王磊 康军伟 张宏宇 马晓萍 姚望 《特种铸造及有色合金》 CAS 北大核心 2021年第11期1419-1423,共5页
对780℃×4 h固溶+320℃×8 h时效处理后的电梯安全钳用Cu-1.9Be-0.25Co合金进行高温拉伸试验,获得了不同试验条件下合金的应力-应变曲线和力学性能,并通过光学显微镜、扫描电镜观察其微观组织和拉伸断口形貌。结果表明,温度对... 对780℃×4 h固溶+320℃×8 h时效处理后的电梯安全钳用Cu-1.9Be-0.25Co合金进行高温拉伸试验,获得了不同试验条件下合金的应力-应变曲线和力学性能,并通过光学显微镜、扫描电镜观察其微观组织和拉伸断口形貌。结果表明,温度对时效态Cu-1.9Be-0.25Co合金高温条件下的抗拉强度和伸长率影响显著。随着拉伸温度升高,合金的抗拉强度从262 MPa逐渐下降到24.5 MPa,伸长率和断面收缩率先升高后降低,在730℃时均达到最大值,分别为129.5%和99%,断面收缩率最大值持续到780℃发生下降;合金的断裂机制为:500℃的沿晶脆性断裂+局部韧性断裂的混合断裂机制向600、730、780、830℃条件下韧性断裂转变。 展开更多
关键词 cu-1.9be-0.25co合金 高温拉伸行为 组织与性能
原文传递
Precipitation Behavior of Cu-1.9Be-0.3Ni-0.15Co Alloy During Aging 被引量:5
3
作者 Yan-Chuan Tang Yong-Lin Kang +1 位作者 Li-Juan Yue Xiao-Liang Jiao 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2015年第3期307-315,共9页
In this paper,the evolutions of microstructure and mechanical properties of Cu-l.9Be-0.3Ni-0.15Co alloy were studied.The alloys in the condition of the solution treated(soft state) and 37% cold rolled(hard state) ... In this paper,the evolutions of microstructure and mechanical properties of Cu-l.9Be-0.3Ni-0.15Co alloy were studied.The alloys in the condition of the solution treated(soft state) and 37% cold rolled(hard state) were aged at 320 ℃for different time,respectively.The mechanical properties,electrical conductivity and microstructure of the alloy aged for different time were analyzed.Additionally,the precipitation kinetics of Cu-1.9Be-0.3Ni-0.15Co alloys was investigated.X-ray diffraction and transmission electron microscopy results reveal that both continuous precipitation and discontinuous precipitation existed in the hard-state Cu-l.9Be-0.3Ni-0.15Co alloy during the whole aging process;the sequence of continuous precipitation is G.P.zone →γ″→γ′→γ.Furthermore,the precipitation transformation mechanism of softstate alloy is homogeneous nucleation,while hard-state alloy shows the heterogeneous nucleation(interface nucleation)with the nucleation rate of both states decaying rapidly to zero during aging at 320 ℃. 展开更多
关键词 cu-1.9be-0.3Ni-0.15Co alloy Aging Microstructure Mechanical property Electrical property Precipitation kinetics
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部