Study of the Emplacement Mechanism of the Fenghuangshan Granite Pluton and Related Cu-Au Mineralization in Tongling, Anhui Province

The Fenghuangshan Pluton is located in the Tongling polymineral-cluster district in the middle-lower section of the Yangtze metallogenic belt. In tectonic terms, it is in the middle of the Guichi-Fanchang faulted fold bundle of the lower Yangtze Platform fold belt between the Dabie Orogenic Belt and the Jiangnan Massif. Analyses of the structural deformation characteristics of both the contact zone and the interior of the pluton are used to explain its emplacement mechanism. The foliation and lineation of the pluton, consisting of the oriented distribution of dark minerals and xenoliths, mainly concentrate along the margin of the pluton. Toward the center of the pluton, the foliation structure becomes weak, showing intense compression formation at the margin, and reflecting the conformable intrusion of the pluton. The relatively gentle lineation is evidence of a rotatory emplacement mechanism. Relatively steep marginal foliation reflects compression expanding. Affected by the thermal power of the pluton, the metamorphism of the contact zone has zonation. Both the strike of the axial plane of fold at the contact zone and that of the flow cleavage of the ductile shear zone are consistent with the boundary of the pluton, which reflects the speciality of conformable intrusion. The hinges of the folds are mostly inclined and erect, reflecting both the rotation of the pluton and its upward spiraling emplacement mechanism. Boudins developed in both the contact zone and the steep strata indicate the emplacement characteristic of the ballon expanding. The surrounding rock of the contact zone shortens horizontally. The average percentage of shortening is 39.7%, which further proves the mechanism of the pluton expanding, and the space occupied by the active expanding intrusion was provided by the shortening of the surrounding rock. The left-lateral shear shown by the ductile shear zone and the rheomorphic fold reveals that the pluton emplacement and the deformation of surrounding rock are controlled by a NNE-striking left-lateral shear stress field. These characteristics of pluton structures provide a mechanism of emplacement. In the deep, the pluton apirally rose left lateral, and in the shallow, the one forcefully emplaced balloningly.

Control of Melt Structures on Cu-Au Mineralization in Basic-Ultrabasic Complexes of Northern China

Based on systematic analyses of 72 samples of different basic-ultrabasic rocks, the present paper discusses the relationship between melt structure and Cu and Au mineralization. It is found that if the NBO/T, NBO, M2+, FeO and MgO values are relatively high and the T, M3+, Fe2O3 and CaO values are low the basic-ultrabasic melt will be favourable to Cu (Ni) mineralization, but if the former are low and the latter are high it is favourable to Au metallization. Cu ions occupy dominantly octahedra in basic-ultrabasic melt and the higher the NBO/T, NBO and M2+ values, the more the octahedra in the melt. Au element mainly takes the form of Au+ ions in basic-ultrabasic melt and the Au+ ions constitute tetrahedral sites together with Fe3+ ions. Therefore, low M2+ and high Fe3+, i.e. high oxygen fu-gacity, can promote the enrichment of Au+ ions and Au mineralization. Components NT (other than Au+), Al2O3 and SiO2 in basic-ultrabasic melt have no effect on metallogenetic species. As mentioned above, in relevant diagrams distribution areas of the characteristic values of ore-free melt and those of ore-forming melt are overlapped in different degrees, which possibly indicates that not all the magmas have mineralizing ability. It can be well distinguished whether basic-ultrabasic rocks are favourable to Cu or Au mineralization or they are just ore-free rocks by analysing integrated diagrams of the characteristic values of the magmatic melt structure.

Crustobody's movement and evolution and its relationship with Cu-Au mineralization of Eastern Tianshan, Xinjiang

Eastern Tianshan, a cardinal part of Northern Xinjiang compound continental crustoblock, is located in the east of Tianshan Diwa region. By analysis of regional geological and geophysical data, and by using crustobody theory and researching methods, this region can be divided into three sectors of different crustal structure. During Proterozoic to Eopaleozoic, the spreading and closing of Northern Tianshan Sea, on the foundation of disparate continental basements of each sectors, the transversal heterogeneity of tectonic movement and evolution resulted in the diversity of crustal structure and material formations. The metallogenic evolution indicated that different geotectonic evolution periods had not only different characteristics of mineralization commodity and mineral deposit types, but also the progressive mineralization feature. In Neopaleozoic, the closing of Northern Tianshan Sea from north to south and the difference of transmeridional tectonic deformation and magmation formed in the movement constituted the different metallogenic environment in shallow crust. Furthermore, it brought on the diverse Cu-Au-polymetal mineral deposit types and metallogenetic epoch from north to south and from west to east.

Research progress of CO_(2) capture and mineralization based on natural minerals

Natural minerals,such as kaolinite,halloysite,montmorillonite,attapulgite,bentonite,sepiolite,forsterite,and wollastonite,have considerable potential for use in CO_(2) capture and mineralization due to their abundant reserves,low cost,excellent mechanical prop-erties,and chemical stability.Over the past decades,various methods,such as those involving heat,acid,alkali,organic amine,amino sil-ane,and ionic liquid,have been employed to enhance the CO_(2) capture performance of natural minerals to attain high specific surface area,a large number of pore structures,and rich active sites.Future research on CO_(2) capture by natural minerals will focus on the full utiliza-tion of the properties of natural minerals,adoption of suitable modification methods,and preparation of composite materials with high specific surface area and rich active sites.In addition,we provide a summary of the principle and technical route of direct and indirect mineralization of CO_(2) by natural minerals.This process uses minerals with high calcium and magnesium contents,such as forsterite(Mg_(2)SiO_(4)),serpentine[Mg_(3)Si_(2)O(OH)_(4)],and wollastonite(CaSiO_(3)).The research status of indirect mineralization of CO_(2) using hydro-chloric acid,acetic acid,molten salt,and ammonium salt as media is also introduced in detail.The recovery of additives and high-value-added products during the mineralization process to increase economic benefits is another focus of future research on CO_(2) mineralization by natural minerals.

Geology and mineralization of the Dongping supergiant alkalic-hosted Au-Te deposit(>100 t Au)in Northern Hebei Province,China:A review

The Dongping deposit is the largest alkalic-hosted gold deposit in China containing>100 t of Au.This paper presents a new understanding for Dongping ore system,based on the previous studies.The mineralization originally occurred at 400-380 Ma,simultaneous with emplacement of the Shuiquangou alkaline complex,and was overprinted by the hydrothermal activity in the Yanshanian.Isotope compositions of ores indicate metals of the deposit are mainly provided by the Shuiquangou complex.Ore-forming fluids are characterized by increasing oxygen fugacity and decreasing sulfur fugacity,while tellurium fugacity increased in the Stage II-2 and decreased in Stage II-3.These systematic changes are closely related to the processes of mineral precipitation and fluid evolution.Sulfide precipitation from Stage Ⅰ to Stage Ⅱ was triggered by fluid boiling,which leads to the precipitation of Pb-Bi-Te,due to decrement of sulfur fugacity.Condensation of gas phase containing high concentration of H_2Te leads to precipitation of Te-Au-Ag minerals and native tellurium.Based on these hypotheses,this paper present a polyphase metallogenic model as follow.During the Devonian,fluids were released from alkaline magmas,which carried ore-forming materials form the surrounding rocks and precipitate the early ores.During the Jurassic-Cretaceous,fluorine-rich fluids exsolved from highly factionated Shangshuiquan granite,which extracted and concentrated Au from the Shuiquangou complex and the Sanggan Group metamorphic rocks,and finally formed the Dongping gold deposit.

Petrogenesis, oxidation state and volatile content of Dongga tonalite in the Gangdese belt, Xizang: Implication for porphyry Cu mineralization

The Gangdese belt in Xizang has experienced both Jurassic subduction and Cenozoic continental collision processes, making it a globally renowned region for magmatic rocks and porphyry copper deposits. Numerous Jurassic intrusions have been identified in the belt. Apart from the quartz diorite porphyry in the large Xietongmen deposit, the Cu mineralization potential of other Jurassic intrusions in this belt remains unclear. This study presents zircon U–Pb dating and trace elements, apatite major and trace elements as well as published whole-rock geochemical and isotopic data of the Dongga tonalite in the central part of the Gangdese belt, aiming to reveal the petrogenesis, oxidation state, volatile content, and Cu mineralization potential of this intrusion. The Dongga tonalite has a zircon U–Pb age of 179.4 ± 0.9 Ma. It exhibits high whole-rock V/Sc values(8.76–14.6), relatively low apatite CeN/CeN*ratios(1.04–1.28), elevated zircon(Eu/Eu*)Nvalues(an average of 0.44), high Ce4+/Ce3+values(205–1896), and high ?FMQ values(1.3–3.7), collectively suggesting a high magmatic oxygen fugacity. The Dongga tonalite features amphibole phenocrysts, relatively high whole-rock Sr/Y ratios(20.3–58.9), and lower zircon Ti temperatures (502–740 ℃), reflecting a high magmatic water content. Estimation of magmatic sulfur content(0.002–0.024 wt%) based on apatite SO3contents indicates an enriched magma sulfur content. Combined with previous studies and the collected Sr–Nd–Hf isotopes, the Dongga tonalite is derived from juvenile lower crust related with subduction of the Neo-Tethys oceanic slab. When compared with Xietongmen orebearing porphyries, the Dongga tonalite exhibits remarkable similarities with the Xietongmen ore-bearing porphyries in terms of magma source, tectonic background, magmatic redox state, and volatile components, which indicates that the Dongga tonalite has a high porphyry Cu mineralization potential, and therefore, provides important guidance for the future mineralization exploration.

Characteristics of Gold Mineralization at the Baguiomo Gold Panning Site, Koudougou Region, Burkina Faso, West Africa

The Birimian Baguiomo formations are located in the northern part of the Boromo greenstone belt. In this belt, the volcanic rocks (tholeiitic basalt, calcalkaline basalt, andesite) hosting the gold mineralization are located in the Kwademen-Baguiomo shear zone. This mineralization, located only a few kilometers from the Kwademen gold deposit, is uncharacterized and, together with the latter, could constitute a gold potential capable of being economically exploitable. It is in this sense that this work is carried out with a view to characterizing the gold mineralization of the Baguiomo gold panning site. To carry out this work, we have made direct field measurements, combined with microstructures, and combined all this with data from geochemical rock analysis of the basalts that are the main host formations. Geochemical data show that tholeitic basalts formed from a mantle plume that was emplaced in an oceanic plateau context. Calc-alkaline basalts and andesites are comparable to Paleoproterozoic tholeitic basalts (PTH3), which are slightly enriched in light rare earths. Fertility tests show that these basalts concentrate between 3 and 6 ppb of gold at the time of accretion, which is sufficient for remobilization of this primary gold during the Eburnian orogeny to yield a deposit of around 4 - 5 Moz. Gold mineralization is associated with pyrite crystals when the latter are disseminated in the rock mass, whereas it is associated with hematite in quartz veins concordant with S1 shear deformation. It is mainly the pyrite crystals in the pressure shadows that contain the gold grains, whose development would be synchronous with micro-shear zone reactivation during the first phase of D1B deformation. The second phase of D2B deformation, which is a crenulation or fracture schistosity, does not significantly affect the shear deformation that controls mineralization.

Systemic modulation of skeletal mineralization by magnesium implant promoting fracture healing: Radiological exploration enhanced with PCA-based machine learning in a rat femoral model

The clinical application of magnesium(Mg)and its alloys for bone fractures has been well supported by in vitro and in vivo trials.However,there were studies indicating negative effects of high dose Mg intake and sustained local release of Mg ions on bone metabolism or repair,which should not be ignored when developing Mg-based implants.Thus,it remains necessary to assess the biological effects of Mg implants in animal models relevant to clinical treatment modalities.The primary purpose of this study was to validate the beneficial effects of intramedullary Mg implants on the healing outcome of femoral fractures in a modified rat model.In addition,the mineralization parameters at multiple anatomical sites were evaluated,to investigate their association with healing outcome and potential clinical applications.Compared to the control group without Mg implantation,postoperative imaging at week 12 demonstrated better healing outcomes in the Mg group,with more stable unions in 3D analysis and high-mineralized bridging in 2D evaluation.The bone tissue mineral density(TMD)was higher in the Mg group at the non-operated femur and lumbar vertebra,while no differences between groups were identified regarding the bone tissue volume(TV),TMD and bone mineral content(BMC)in humerus.In the surgical femur,the Mg group presented higher TMD,but lower TV and BMC in the distal metaphyseal region,as well as reduced BMC at the osteotomy site.Principal component analysis(PCA)-based machine learning revealed that by selecting clinically relevant parameters,radiological markers could be constructed for differentiation of healing outcomes,with better performance than 2D scoring.The study provides insights and preclinical evidence for the rational investigation of bioactive materials,the identification of potential adverse effects,and the promotion of diagnostic capabilities for fracture healing.

Nitrogen mineralization in the oldest climax communities in the eastern Mediterranean region

In this study,we investigated how tree species affect N mineralization in connection to some soil properties and seconder metabolite levels of litter,in the soil of the old-est native forest communities.In the oldest pure communi-ties of Pinus nigra(PN),Fagus orientalis(FO),and Abies bornmuelleriana(AB)in the mountain range of Mount Uludağ,Bursa,Turkey,annual net yield and N mineraliza-tion in the 0-5-and 5-20-cm soil layers were determined in a field incubation study over 1 year.Sampling locations were chosen from 1300 to 1600 m a.s.l.,and moisture content(%),pH,water-holding capacity(%),organic C,total N,and C/N ratio,and annual net mineral N yield of the soil and hydro-lyzed tannic acid and total phenolic compounds in litter were compared for these forest communities.F.orientalis had the highest annual net Nmin yield(43.9±4.8 kg ha^(-1) a^(-1)),P.nigra the lowest(30.5±4.2 kg ha^(-1) a^(-1)).Our findings show that in the oldest forest ecosystems,the seasonal soil moisture content and tree species play an essential role in N cycling and that hydrolyzed tannic acids and total phenolic compounds effectively control N turnover.Tannic acid and total phenolics in the litter were found to inhibit nitrification,but total phenolics were found to stimulate ammonification.

Trace element compositions of pyrite and stibnite:implications for the genesis of antimony mineralization in the Yangla Cu skarn deposit,Northwestern Yunnan,China

The Yangla Cu skarn deposit is located in the central part of the Jinshajiang Suture Zone,southwest China,with a total reserve of 150 Mt Cu@1.03%.The newly discovered antimony orebodies at the depth of Yangla are strictly controlled by the stratum,structure,and lithology,which are lenticular and vein-like within the marble fracture zone,which can provide a window into multistage miner-alization and ore genesis at Yangla.Mineralization can be divided into three types,Cu–Pb–Zn(skarn)pyrite,galena,and sphalerite,Cu(porphyry)chalcopyrite and pyrite,and Sb(hydrothermal)stibnite and pyrite.The mineral assem-blages were stibnite+pyrite+calcite+quartz±minor scheelite in antimony ores.This study presents quantitative measurements of the trace element compositions of pyrite and stibnite from the Yangla antimony ores.Analysis of pyrite with electron probe microanalysis(EPMA)showed enrichment in Co,Ni,Sb,As,and Mo,and deficit in its S and Fe contents when compared to the stoichiometric con-centrations of S and Fe in pyrite.The Sb-related pyrite may belong to sedimentary-reworked genesis and may be modi-fied by hydrothermalfluids,thereby presenting a certain dif-ference(i.e.,crystal morphology,texture,and chemical com-position)compared to the skarn and porphyry Cu-related pyrite in the Yangla Cu skarn deposit.Analysis of stibnite with EPMA and inductively coupled plasma-mass spectrom-etry showed enrichment in As,Pb,Sn,Pb,Cu,and Zn,and presented much higher Sb contents and slightly lower S con-tents when compared to the stoichiometric concentrations of Sb and S in stibnite.Statistical analysis of the stibnite trace elements showed correlations for the elemental pairs Cu–Pb,As–Sb,and Sn–Pb,and the coupled substitution equations Sb^(3+)↔Cu^(+)+Pb^(2+),Sb^(3+)↔As^(3+),and Sn^(2+)↔Pb^(2+)may be the major factors governed the incorporating Cu,Pb,As and Sn within the stibnite.Moreover,this study preliminary shows that the antimony mineralization may belong to a car-bonate replacement hydrothermal genesis at Yangla.

Three-dimensional Modeling of Ore-forming Elements and Mineralization Prognosis for the Yechangping Mo Deposit,Henan Province,China

Three-dimensional geochemical modeling of ore-forming elements is crucial for predicting deep mineralization.This approach provides key information for the quantitative prediction of deep mineral localization,three-dimensional fine interpolation,analysis of spatial distribution patterns,and extraction of quantitative mineral-seeking markers.The Yechangping molybdenum(Mo)deposit is a significant and extensive porphyry-skarn deposit in the East Qinling-Dabie Mo polymetallic metallogenic belt at the southern margin of the North China Block.Abundant borehole data on oreforming elements underpin deep geochemical predictions.The methodology includes the following steps:(1)Threedimensional geological modeling of the deposit was established.(2)Correlation,cluster,and factor analyses post delineation of mineralization stages and determination of mineral generation sequence to identify(Cu,Pb,Zn,Ag)and(Mo,W,mfe)assemblages.(3)A three-dimensional geochemical block model was constructed for Mo,W,mfe,Cu,Zn,Pb,and Ag using the ordinary kriging method,and the variational function was developed.(4)Spatial distribution and enrichment characteristics analysis of ore-forming elements are performed to extract geological information,employing the variogram and w(Cu+Pb+Zn+Ag)/w(Mo+W)as predictive indicators.(5)Identifying the western,northwestern,and southwestern areas of the mine with limited mineralization potential,contrasted by the northeastern and southeastern areas favorable for mineral exploration.

Magmatic-hydrothermal Evolution and Mineralization Mechanisms of the Wangjiazhuang Cu(-Mo)Deposit in the Zouping Volcanic Basin,Shandong Province,China:Constraints from Fluid Inclusions

The Wangjiazhuang Cu(-Mo)deposit,located within the Zouping volcanic basin in western Shandong Province,China,is unique in this area for having an economic value.In order to expound the metallogenetic characteristics of this porphyry-like hydrothermal deposit,a detailed fluid inclusion study has been conducted,employing the techniques of representative sampling,fluid inclusion petrography,microthermometry,Raman spectroscopy,LA-ICP-MS analysis of single fluid inclusions,as well as cathode fluorescence spectrometer analysis of host mineral quartz.The deposit contains mainly two types of orebodies,i.e.veinlet-dissemination-stockwork orebodies in the K-Si alteration zone and pegmatiticquartz sulfide veins above them.In addition,minor breccia ore occurs locally.Four types of fluid inclusions in the deposit and altered quartz monzonite are identified:L-type one-or two-phase aqueous inclusions,V-type vapor-rich inclusions with V/L ratios greater than 50%-90%,D-type multiphase fluid inclusions containing daughter minerals or solids and S-type silicate-bearing fluid inclusions containing mainly muscovite and biotite.Ore petrography and fluid inclusion study has revealed a three-stage mineralization process,driven by magmatic-hydrothermal fluid activity,as follows.Initially,a hydrothermal fluid,separated from the parent magma,infiltrated into the quartz monzonite,resulting in its extensive K-Si alteration,as indicated by silicate-bearing fluid inclusions trapped in altered quartz monzonite.This is followed by the early mineralization,the formation of quartz veinlets and dissemination-stockwork ores.During the main mineralization stage,due to the participation and mixing of meteoric groundwater with magmatic-sourced hydrothermal fluid,the cooling and phase separation caused deposition of metals from the hydrothermal fluids.As a result,the pegmatitic-quartz sulfide-vein ores formed.In the late mineralization stage,decreasing fluid salinity led to the formation of L-type aqueous inclusions and chalcopyrite-sulfosalt ore.Coexistence of V-type and D-type inclusions and their similar homogenization temperatures with different homogenization modes suggest that phase separation or boiling of the ore-forming fluids took place during the early and the main mineralization stages.The formation P-T conditions of S-type inclusions and the early and the main mineralization stages were estimated as ca.156-182 MPa and 450-650℃,350-450℃,18-35 MPa and 280-380℃,8-15 MPa,respectively,based on the microthermometric data of the fluid inclusions formed at the individual stages.

Synergistic CO_(2) mineralization using coal fly ash and red mud as a composite system

CO_(2) mineralization plays a critical role in the storage and utilization of CO_(2).Coal fly ash(CFA)and red mud(RM)are widely utilized as CO_(2) mineralizers.However,the inert calcium species in CFA limit its carbonation capacity,meanwhile the substantial Ca^(2+)releasing of RM is hindered by a covering layer of calcium carbonate.In this study,CO_(2) mineralization in a composite system of CFA and RM was investigated to enhance the carbonation capacity.Multiple analyzers were employed to characterize the raw materials and resulting mineralization products.The results demonstrated that a synergistic effect existed in the composite system of CFA and RM,resulting in improving CO_(2) mineralization rate and efficiency.The produced calcium carbonate was ectopically attached the surface of CFA in the composite system,thus slowing down its coverage on the surface of RM.This phenomenon facilitated further releasing Ca^(2+)from the internal RM,thereby enhancing CO_(2) mineralization efficiency.Meanwhile,the inclusion of RM significantly improved the alkalinity of the composite system,which not only promoted the dissolution of Ca^(2+)of the inert CaSO_(4)(H_(2)O)_(2) in CFA,but also accelerated CO_(2) mineralization rate.The investigation would be beneficial to CO_(2) mineralization using industrial solid wastes.

Geochemical Anomalies Identified by Multifractal Modeling: Implications for Mineral Exploration in the Ziyoutun Cu-Au District, Jilin Province, China

The Ziyoutun Cu-Au district is located in the Jizhong–Yanbian Metallogenic Belt and possesses excellent prospects. However, the thick regolith and complex tectonic settings present challenges in terms of detecting and decomposition of weak geochemical anomalies. To address this challenge, we initially conducted a comprehensive analysis of 1:10,000-scale soil geochemical data. This analysis included multivariate statistical techniques, such as correlation analysis, R-mode cluster analysis, Q–Q plots and factor analysis. Subsequently, we decomposed the geochemical anomalies, identifying weak anomalies using spectrum-area modeling and local singularity analysis. The results indicate that the assemblage of Au-Cu-Bi-As-Sb represents the mineralization at Ziyoutun. In comparison to conventional methods, spectrumarea modeling and local singularity analysis outperform in terms of identification of anomalies. Ultimately, we considered four specific target areas(AP01, AP02, AP03 and AP04) for future exploration, based on geochemical anomalies and favorable geological factors. Within AP01 and AP02, the geochemical anomalies suggest potential mineralization at depth, whereas in AP03 and AP04 the surface anomalies require additional geological investigation. Consequently, we recommend conducting drilling, following more extensive surface fieldwork, at the first two targets and verifying surface anomalies in the last two targets. We anticipate these findings will significantly enhance future exploration in Ziyoutun.

Lithostructural Control of the Gold Mineralization of the Douta Permit of African Star Resources (Kédougou-Kéniéba Inlier, Southeastern Senegal)

The Douta permit of African Star Resources/Thor Explorations, located in the southeast of Senegal, in the Kédougou-Kéniéba Inlier (western part of the West African Craton), is dominated to the East by metasedimentary formations such as greywackes, shales, graphitic shales, quartzites, cherts, claystones and breccias characteristic of the Dialé-Daléma basin. To the West, the mafic formations of the Mako volcanic belt are the most common. Metasedimentary rocks are associated with metavolcanosedimentary terms found at the contact zones between the two (2) Birimian groups. These different geological formations are cut by mafic dolerite and gabbro sills and/or dykes, as well as quartz and microgranite veins. The Douta gold project is crossed from North to South by the MTZ (Main Transcurrent Zone), generally oriented NE-SW and becoming N-S towards the North. The permit is characterized by several shear corridors. The rocks are affected by brittle, brittle-ductile to ductile deformations. The gold mineralization is hosted by a NE-trending shear corridor called the Makosa corridor (Makosa shear zone), therefore sub-parallel to the MTZ. It has a subvertical dip (75˚ to 85˚ to the NW). It is associated with a hydrothermal phase characterized by quartz-sericite-epidote-fine, disseminated pyrite and arsenopyrite ± albite ± chlorite paragenesis. These minerals testify to the existence of a low degree of metamorphism (greenschist facies, epizonal domain) in the area. However, metamorphism reaches amphibolite facies in some places, particularly in the vicinity of intrusive bodies, with the presence of hornblende (amphiboles) and plagioclase. The gold mineralization is mainly hosted by two (2) metasedimentary lithological units: meta-greywackes and shales.

Source Enrichment Control on the Scale of Magmatic-Hydrothermal W-Sn Mineralization:Insights from Triassic and Jurassic Magma Reservoirs in the Continental Crust,Xitian,South China

There are two factors,source composition and magmatic differentiation,potentially controlling W-Sn mineralization.Which one is more important is widely debated and may need to be determined for each individual deposit.The Xitian granite batholith located in South China is a natural laboratory for investigating the above problem.It consists essentially of two separate components,formed in the Triassic at ca.226 Ma and Jurassic at ca.152 Ma,respectively.The Triassic and Jurassic rocks are both composed of porphyritic and fine-grained phases.The latter resulted from highlydifferentiated porphyritic ones but they have similar textural characteristics and mineral assemblages,indicating that they reached a similar degree of crystal fractionation.Although both fine-grained phases are highly differentiated with elevated rare metal contents,economic W–Sn mineralization is rare in the Triassic granitoids and this can be attributed to less fertile source materials than their Jurassic counterparts,with a slightly more enriched isotopic signature and whole-rockεNd(226 Ma)of−10.4 to−9.2(2σ=0.2)compared withεNd(152 Ma)of−9.2 to−8.2(2σ=0.2)for the Jurassic rocks.The initial W-Sn enrichment was derived from the metasedimentary rocks and strongly enhanced by reworking of the continental crust,culminating in the Jurassic.

Characteristics of Gold and Its Mineralization Style in the Boulon Djounga Eastern Perimeter of Liptako Mining Company (Central Southwestern Niger)

The Boulon Djounga eastern perimeter is part of the Tiawa operating permit of the Société des Mines du Liptako (SML), located in the central southwestern part of Liptako (Niger). In this study, we used field data, Reverse Circulation (RC) surveys and chemical analyzes of gold to determine the characteristics of gold and its mineralization style. The eastern perimeter of Boulon Djounga is represented by a succession of metabasalts and metasediments both intersected by intrusions of quartz and dolerite dykes, and covered by sandstone and clayey rocks. Gold is present in low contents (0.00 - 0.30 ppm) in the sedimentary cover and in medium (0.30 - 1.00 ppm) or high contents (1.00 - 4.534 ppm) in the metasediments, and in the gray quartz veins and locally in the volcanics. It exists in a disseminated state or in a concentrated state in the surrounding areas in the form of discrete grains associated with sulphurous minerals (pyrite: FeS2, chalcopyrite: CuFeS2 or arsenopyrite: FeAsS). The presence of gold in the quartz veins, and the NE-SW and NW-SE orientations of the ore bodies suggest that the eastern Boulon Djounga gold mineralization would be established during a late magmatic extensive phase.

Hydrochemistry of Groundwater in the Rice Cultivation Area of Maga: Analysis of the Mineralization Process

The use of groundwater for drinking water supply to the population is increasingly practiced in the rice cultivation area of Maga. However, there is a lack of knowledge about the hydrochemical characteristics of this water due to a lack of quality control. This study aims to contribute to the understanding of mineralization processes in order to establish the hydrochemical profile of the water in the area. The methodological approach consisted of collecting fifteen water samples from wells and boreholes during six campaigns for physicochemical analysis, and studying them through methods of interpreting hydrochemical data. The analysis results show that these waters are moderately mineralized. The water facies are mainly of the bicarbonate sodium and potassium type, as well as the bicarbonate calcium and magnesium type. Calculation of saturation indices demonstrates that evaporite minerals show lower degrees of saturation than carbonate minerals, with gypsum, anhydrite, and halite being in a highly undersaturated state. The mineralization of groundwater originates from the dissolution of surrounding rocks on the one hand, and anthropogenic activities involving exchanges between alkalis (Na+ and K+) in the aquifer and alkaline earth (Ca2+ and Mg2+), resulting in the fixation of alkaline earth and the dissolution of alkalis.

A review of in situ carbon mineralization in basalt

Global warming has greatly threatened the human living environment and carbon capture and storage(CCS)technology is recognized as a promising way to reduce carbon emissions.Mineral storage is considered a reliable option for long-term carbon storage.Basalt rich in alkaline earth elements facilitates rapid and permanent CO_(2) fixation as carbonates.However,the complex CO_(2)-fluid-basalt interaction poses challenges for assessing carbon storage potential.Under different reaction conditions,the carbonation products and carbonation rates vary.Carbon mineralization reactions also induce petrophysical and mechanical responses,which have potential risks for the long-term injectivity and the carbon storage safety in basalt reservoirs.In this paper,recent advances in carbon mineralization storage in basalt based on laboratory research are comprehensively reviewed.The assessment methods for carbon storage potential are introduced and the carbon trapping mechanisms are investigated with the identification of the controlling factors.Changes in pore structure,permeability and mechanical properties in both static reactions and reactive percolation experiments are also discussed.This study could provide insight into challenges as well as perspectives for future research.

Geology and mineralization of the Duobaoshan supergiant porphyry Cu-Au-Mo-Ag deposit(2.36 Mt)in Heilongjiang Province,China:A review

The reserves of the Duobaoshan porphyry Cu-Au-Mo-Ag deposit(also referred to as the Duobaoshan porphyry Cu deposit)ranks first among the copper deposits in China and 33rd among the porphyry copper deposits in the world.It has proven resources of copper(Cu),molybdenum(Mo),gold(Au),and silver(Ag)of 2.28×10^(6)t,80×10^(3)t,73 t,and 1046 t,respectively.The major characteristics of the Duobaoshan porphyry Cu deposit are as follows.It is located in a zone sandwiched by the Siberian,North China,and paleo-Pacific plates in an island arc tectonic setting and was formed by the Paleozoic mineralization and the Mesozoic mineralization induced by superposition and transformation.The metallogenic porphyries are the Middle Hercynian granodiorite porphyries.The alterations of surrounding rocks are distributed in a ring form.With silicified porphyries at the center,the alteration zones of K-feldspar,biotite,sericite,and propylite occur from inside to outside.This deposit is composed of 215 ore bodies(including 14 major ore bodies)in four mineralized zones.Ore body No.X in the No.3 mineralized zone has the largest resource reserves,accounting for more than 78%of the total reserves of the deposit.Major ore components include Cu,Mo,Au,Ag,Se,and Ga,which have an average content of 0.46%,0.015%,0.16 g/t,1.22 g/t,0.0003%,and 0.001%-0.003%,respectively.The ore minerals of this deposit primarily include pyrite,chalcopyrite,bornite,and molybdenite,followed by magnetite,hematite,rutile,gelenite,and sphalerite.The ore-forming fluids of this deposit were magmatic water in the early metallogenic stage and then the mixture of meteoric water and magmatic water at the late metallogenic stage.The ore-forming fluids experienced three stages.The ore-forming fluids of stageⅠhad a hydrochemical type of H_(2)O-CO_(2)-Na Cl,an ore-forming temperature of 375-650℃,and ore-forming pressure of 110-160 MPa.The ore-forming fluids of stageⅡhad a hydrochemical type of H_(2)O-CO_(2)-Na Cl,an ore-forming temperature of 310-350℃,and ore-forming pressure of 58-80 MPa.The ore-forming fluids of stageⅢhad a hydrochemical type of Na Cl-H_(2)O,an ore-forming temperature of 210-290℃,and ore-forming pressure of 5-12 MPa.The CuAu-Mo-Ag mineralization mainly occurred at stagesⅠandⅡ,with the ore-forming materials having a mixed crust-mantle source.The Duobaoshan porphyry Cu deposit was formed in the initial subduction environment of the Paleo-Asian Ocean Plate during the Early Ordovician.Then,due to the closure of the Mongol-Okhotsk Ocean and the subduction and compression of the Paleo-Pacific Ocean,a composite orogenic metallogenic model of the deposit was formed.In other words,it is a porphyry-epithermal copper-gold polymetallic mineralization system of composite orogeny consisting of Paleozoic island arcs and Mesozoic orogeny and extension.