New copper alloys with high mechanical properties and high electrical conductivity were prepared, and the effects of addition of minor Mg and Y elements on microstructures and properties were studied. The high tensile...New copper alloys with high mechanical properties and high electrical conductivity were prepared, and the effects of addition of minor Mg and Y elements on microstructures and properties were studied. The high tensile strength of above 510 MPa, high elongation of 11%and high electrical conductivity of over 63%IACS can be simultaneously obtained in Cu-0.47Mg-0.20Te-0.04Y alloy after deforming and annealing treatment. Effects of purification together with the grain refining by Y and solid-solution strengthening by Mg are appropriate for enhancing mechanical properties and electrical conductivity of the copper alloys.展开更多
Microstructures and element distributions of the as-cast, hot-rolled and cold-rolled Cu-Mg-Te-Y alloys were studied. Effects of rolling process and annealing temperature on the properties of the Cu-Mg-Te-Y alloys were...Microstructures and element distributions of the as-cast, hot-rolled and cold-rolled Cu-Mg-Te-Y alloys were studied. Effects of rolling process and annealing temperature on the properties of the Cu-Mg-Te-Y alloys were correspondingly investigated. The results indicate that the Mg element is homogeneously distributed in the matrix and the fragmentized Cu2Te phase is dispersed in the matrix after hot rolling. Then, the Cu2Te phase is further stretched to strip shape after the cold rolling process. The microstructures of the cold-rolled alloy keep unchanged for the sample annealed below 390 ℃ for 1 h. However, after annealing at 550 ℃ for 1 h, the copper alloy with fibrous microstructures formed during the cold rolling process recrystallizes, leading to an obvious drop of hardening effect and an increase of electrical conductivity. The Cu-Mg-Te-Y alloy with better comprehensive properties is obtained by annealing at 360-390 ℃.展开更多
New Cu-Mg-Te-Y alloys with high strength and high conductivity were prepared by electromagnetic continuous casting（EMCC）and direct chill casting（DC）.The structures,patterns of elements distributions and mechanical...New Cu-Mg-Te-Y alloys with high strength and high conductivity were prepared by electromagnetic continuous casting（EMCC）and direct chill casting（DC）.The structures,patterns of elements distributions and mechanical properties of the alloys were investigated.It was found that the equiaxed crystal zone was enlarged and the element Mg and Cu;Te phase were well-distributed by medium-frequency electromagnetic field during continuous casting method.Moreover,the defects and casting impurities were significantly reduced with the addition of electromagnetic,leading to the improvement of the mechanical properties.展开更多
基金Project (50875031) supported by the National Natural Science Foundation of ChinaProject (20095263005) supported by Aviation Science Foundation of China
文摘New copper alloys with high mechanical properties and high electrical conductivity were prepared, and the effects of addition of minor Mg and Y elements on microstructures and properties were studied. The high tensile strength of above 510 MPa, high elongation of 11%and high electrical conductivity of over 63%IACS can be simultaneously obtained in Cu-0.47Mg-0.20Te-0.04Y alloy after deforming and annealing treatment. Effects of purification together with the grain refining by Y and solid-solution strengthening by Mg are appropriate for enhancing mechanical properties and electrical conductivity of the copper alloys.
基金Project (50875031) supported by the National Natural Science Foundation of ChinaProject (DUT122D205) supported by the Fundamental Research Funds for the Central Universities,China
文摘Microstructures and element distributions of the as-cast, hot-rolled and cold-rolled Cu-Mg-Te-Y alloys were studied. Effects of rolling process and annealing temperature on the properties of the Cu-Mg-Te-Y alloys were correspondingly investigated. The results indicate that the Mg element is homogeneously distributed in the matrix and the fragmentized Cu2Te phase is dispersed in the matrix after hot rolling. Then, the Cu2Te phase is further stretched to strip shape after the cold rolling process. The microstructures of the cold-rolled alloy keep unchanged for the sample annealed below 390 ℃ for 1 h. However, after annealing at 550 ℃ for 1 h, the copper alloy with fibrous microstructures formed during the cold rolling process recrystallizes, leading to an obvious drop of hardening effect and an increase of electrical conductivity. The Cu-Mg-Te-Y alloy with better comprehensive properties is obtained by annealing at 360-390 ℃.
基金Item Sponsored by National Natural Science Foundation of China(50875031)Aviation Science Foundation of China(20095263005)
文摘New Cu-Mg-Te-Y alloys with high strength and high conductivity were prepared by electromagnetic continuous casting（EMCC）and direct chill casting（DC）.The structures,patterns of elements distributions and mechanical properties of the alloys were investigated.It was found that the equiaxed crystal zone was enlarged and the element Mg and Cu;Te phase were well-distributed by medium-frequency electromagnetic field during continuous casting method.Moreover,the defects and casting impurities were significantly reduced with the addition of electromagnetic,leading to the improvement of the mechanical properties.
