Product selectivity and reaction pathway are highly dependent on surface structure of heterogeneous catalysts.For vapor-phase hydrogenation of dimethyl oxalate(DMO),"EG route"(DMO→methyl glycolate(MG)ethyle...Product selectivity and reaction pathway are highly dependent on surface structure of heterogeneous catalysts.For vapor-phase hydrogenation of dimethyl oxalate(DMO),"EG route"(DMO→methyl glycolate(MG)ethylene glycol(EG)→ethanol(ET))and"MA route"(DMO→MG→methyl acetate(MA))were proposed over traditional Cu based catalysts and Mo-based or Fe-based catalysts,respectively.Herein,tunable yield of ET(93.7%)and MA(72.1%)were obtained through different reaction routes over WO_(x) modified Cu/SiO_(2) catalysts,and the corresponding reaction route was further proved by kinetic study and in-situ DRIFTS technology.Mechanistic studies demonstrated that H_(2) activation ability,acid density and Cu-WO_(x) interaction on the catalysts were tuned by regulating the surface W density,which resulted in the different reaction pathway and product selectivity.What's more,high yield of MA produced from DMO hydrogenation was firstly reported with the H_(2) pressure as low as 0.5 MPa.展开更多
A series of functionalized USY/SiO_(2) zeolite composite supports were synthesized using the coating coprecipitation method,with tetraethyl orthosilicate(TEOS)as the silicon source and different ratios of USY to TEOS....A series of functionalized USY/SiO_(2) zeolite composite supports were synthesized using the coating coprecipitation method,with tetraethyl orthosilicate(TEOS)as the silicon source and different ratios of USY to TEOS.Active metals nickel(Ni)and molybdenum(Mo)were loaded onto the supports using the impregnation method.Finally,a series of hydrogenation catalysts were synthesized.The characterization results showed that,compared with the USY catalyst,the addition of a certain quantity of SiO_(2) resulted in the disappearance of the strong acid sites on the catalyst,the number of weak acid and medium strong acid sites decreased,and a certain number of secondary mesoporous structures were formed.The addition of SiO_(2) reduced the secondary cracking of benzene,toluene,xylene,and ethylbenzene(BTXE)effectively,while excessive amounts of SiO_(2) reduced the hydrogenation activity of the catalyst,leading to a decline in the final yield of BTXE.At a maximum SiO_(2) content of 45%,the hydrogenation depth of light cycle oil(LCO)reached an optimum value.The hydrogenation performance of LCO was investigated in a fixed bed reactor at 380℃,4 MPa,and H2/oil volume ratio of 800:1,where the gasoline and diesel fractions reached 80.00%and 16.74%,respectively.NiMo-YS45 had the highest BTXE selectivity,and the final yield of BTXE reached 21.27%.展开更多
基金supported by National Natural Science Foundation of China (No.22102147 and 22002151)State Key Laboratory of Chemical Engineering (No.SKL-ChE-22A02)+2 种基金Zhejiang Provincial Natural Science Foundation of China under Grant No.LQ21B030009the Strategic Priority Research Program of the Chinese Academy of Sciences (No.XDA29050300)Qinchuang Yuan high-level innovation and entrepreneurship talents implementing project (No.QCYRCXM-2022-177)。
文摘Product selectivity and reaction pathway are highly dependent on surface structure of heterogeneous catalysts.For vapor-phase hydrogenation of dimethyl oxalate(DMO),"EG route"(DMO→methyl glycolate(MG)ethylene glycol(EG)→ethanol(ET))and"MA route"(DMO→MG→methyl acetate(MA))were proposed over traditional Cu based catalysts and Mo-based or Fe-based catalysts,respectively.Herein,tunable yield of ET(93.7%)and MA(72.1%)were obtained through different reaction routes over WO_(x) modified Cu/SiO_(2) catalysts,and the corresponding reaction route was further proved by kinetic study and in-situ DRIFTS technology.Mechanistic studies demonstrated that H_(2) activation ability,acid density and Cu-WO_(x) interaction on the catalysts were tuned by regulating the surface W density,which resulted in the different reaction pathway and product selectivity.What's more,high yield of MA produced from DMO hydrogenation was firstly reported with the H_(2) pressure as low as 0.5 MPa.
基金National Natural Science Foundation of China(Grant No.21968034).
文摘A series of functionalized USY/SiO_(2) zeolite composite supports were synthesized using the coating coprecipitation method,with tetraethyl orthosilicate(TEOS)as the silicon source and different ratios of USY to TEOS.Active metals nickel(Ni)and molybdenum(Mo)were loaded onto the supports using the impregnation method.Finally,a series of hydrogenation catalysts were synthesized.The characterization results showed that,compared with the USY catalyst,the addition of a certain quantity of SiO_(2) resulted in the disappearance of the strong acid sites on the catalyst,the number of weak acid and medium strong acid sites decreased,and a certain number of secondary mesoporous structures were formed.The addition of SiO_(2) reduced the secondary cracking of benzene,toluene,xylene,and ethylbenzene(BTXE)effectively,while excessive amounts of SiO_(2) reduced the hydrogenation activity of the catalyst,leading to a decline in the final yield of BTXE.At a maximum SiO_(2) content of 45%,the hydrogenation depth of light cycle oil(LCO)reached an optimum value.The hydrogenation performance of LCO was investigated in a fixed bed reactor at 380℃,4 MPa,and H2/oil volume ratio of 800:1,where the gasoline and diesel fractions reached 80.00%and 16.74%,respectively.NiMo-YS45 had the highest BTXE selectivity,and the final yield of BTXE reached 21.27%.