Cu-Sn-Zn ternary alloy layer with 10 μm thickness was prepared through electroless plating method. The influences of process conditions including the concentration of metallic salts, reductant and complex agent on Cu...Cu-Sn-Zn ternary alloy layer with 10 μm thickness was prepared through electroless plating method. The influences of process conditions including the concentration of metallic salts, reductant and complex agent on Cu-Sn-Zn alloy were studied in details. The stability to bear color changes and corrosion resistance of Cu-Sn-Zn film layer were studied through air-exposure experiment and electrochemical analyses test respectively. The results show that the performances of Cu-Sn-Zn film layer are obviously superior to brass matrix. By use of SEM,EDS and XRD, the morphology, microstructure and chemical composition were investigated. The results show that complex agent can increase the content of Sn and Zn, improve the evenness and compactness and decrease needle holes, therefore the properties of electroless plating layer such as the stability to bear color changes and corrosion resistance are improved remarkably. The probable mechanism of complex agent was discussed.展开更多
研究了固溶时效和快速凝固时效对Cu Cr Sn Zn合金的微观组织、硬度和导电率性能的影响。结果表明,快速凝固态下合金的晶粒比固溶态时的晶粒要细小得多,细晶强化作用显著;合金快速凝固时效后的析出相较固溶时效的析出相更加弥散、稠密,...研究了固溶时效和快速凝固时效对Cu Cr Sn Zn合金的微观组织、硬度和导电率性能的影响。结果表明,快速凝固态下合金的晶粒比固溶态时的晶粒要细小得多,细晶强化作用显著;合金快速凝固时效后的析出相较固溶时效的析出相更加弥散、稠密,使合金强度得以提高。合金经920℃×1h固溶和500℃×15min时效后,硬度为102HV,导电率达50%IACS;而快速凝固的合金在同样的时效条件下,硬度为179HV,导电率达60%IACS。展开更多
基金Project(04JJ40036)Supported by the Natural Science Foundation of Hunan Province, China
文摘Cu-Sn-Zn ternary alloy layer with 10 μm thickness was prepared through electroless plating method. The influences of process conditions including the concentration of metallic salts, reductant and complex agent on Cu-Sn-Zn alloy were studied in details. The stability to bear color changes and corrosion resistance of Cu-Sn-Zn film layer were studied through air-exposure experiment and electrochemical analyses test respectively. The results show that the performances of Cu-Sn-Zn film layer are obviously superior to brass matrix. By use of SEM,EDS and XRD, the morphology, microstructure and chemical composition were investigated. The results show that complex agent can increase the content of Sn and Zn, improve the evenness and compactness and decrease needle holes, therefore the properties of electroless plating layer such as the stability to bear color changes and corrosion resistance are improved remarkably. The probable mechanism of complex agent was discussed.
文摘研究了固溶时效和快速凝固时效对Cu Cr Sn Zn合金的微观组织、硬度和导电率性能的影响。结果表明,快速凝固态下合金的晶粒比固溶态时的晶粒要细小得多,细晶强化作用显著;合金快速凝固时效后的析出相较固溶时效的析出相更加弥散、稠密,使合金强度得以提高。合金经920℃×1h固溶和500℃×15min时效后,硬度为102HV,导电率达50%IACS;而快速凝固的合金在同样的时效条件下,硬度为179HV,导电率达60%IACS。
