In this work,a set of novel Cu2ZnSnS4/Bi2WO6(CZTS/BWO)two-dimensional(2 D)/two-dimensional(2 D)type-Ⅱheterojunctions with different CZTS weight ratios(1%,2%,and 5%)were successfully synthesized via a brief secondary ...In this work,a set of novel Cu2ZnSnS4/Bi2WO6(CZTS/BWO)two-dimensional(2 D)/two-dimensional(2 D)type-Ⅱheterojunctions with different CZTS weight ratios(1%,2%,and 5%)were successfully synthesized via a brief secondary solvothermal process.The successful formation of the heterojunctions was affirmed by characterization methods such as X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy.The photocatalytic activity results showed that the prepared CZTS/BWO heterojunctions had excellent photocatalytic behaviors for organic degradation,especially when the mass fraction of CZTS with respect to BWO in the composite was 2%.Moreover,the addition of hydrogen peroxide(H2O2)could further improve the dye and antibiotic degradation efficiencies.The reinforced photocatalytic and photo-Fenton degradation performance were primarily attributable to the introduction of BWO,which afforded increased active sites,expanded the solar spectral response range,and accelerated the cycle of Cu(Ⅱ)/Cu(Ⅰ);after four cycling times,its catalytic activity did not decrease significantly.In addition,reasonable hypotheses of the photocatalytic and photo-Fenton catalytic mechanisms were formulated.This study is expected to provide a visual approach for designing a novel photo-Fenton catalyst to jointly utilize the photocatalytic and Fenton activities,which can be better applied to the purification of residual organics in wastewater.展开更多
Cu2ZnSnS4 thin films were prepared by cosputtering with Cu(or Cu2S),ZnS and SnS2 targets in this study.S amount in the precursor of Cu2ZnSnS4 thin film was verified by using Cu or Cu2S target.The effect of S amount in...Cu2ZnSnS4 thin films were prepared by cosputtering with Cu(or Cu2S),ZnS and SnS2 targets in this study.S amount in the precursor of Cu2ZnSnS4 thin film was verified by using Cu or Cu2S target.The effect of S amount in the precursor on the microstructure and element distribution of Cu2ZnSnS4 thin film was discussed.It was found that S content is sufficient in the precursor thin film using Cu2 S instead of Cu target.The microstructure,composition homogeneity,and secondary phase formation of the Cu2ZnSnS4 thin film are seriously affected by S amount in the precursor thin film.Namely,sufficient S can improve the crystallization and orientation of the precursor thin film and enhance the compactness as well as composition homogeneity of the Cu2ZnSnS4 thin film after sulfurization.Moreover,the secondary phase formation in Cu2ZnSnS4 thin film can be greatly inhibited by increasing S content in the precursor thin film.展开更多
基金supported by the National Natural Science Foundation of China(21663030,21666039)the Open Project of State Key Laboratory of Organic-Inorganic Composites Beijing Key Laboratory,Beijing University of Chemical Technology(oic-201901009)+2 种基金the Project of Science&Technology Office of Shannxi Province(2018TSCXL-NY-02-01,2013K11-08,2013SZS20-P01)Industrial Key Project of Yan’an Science and Technology Bureau(2018KG-04)the Project of Yan’an Science Graduate Innovation Project of Yan’an University(YCX201988)~~
文摘In this work,a set of novel Cu2ZnSnS4/Bi2WO6(CZTS/BWO)two-dimensional(2 D)/two-dimensional(2 D)type-Ⅱheterojunctions with different CZTS weight ratios(1%,2%,and 5%)were successfully synthesized via a brief secondary solvothermal process.The successful formation of the heterojunctions was affirmed by characterization methods such as X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy.The photocatalytic activity results showed that the prepared CZTS/BWO heterojunctions had excellent photocatalytic behaviors for organic degradation,especially when the mass fraction of CZTS with respect to BWO in the composite was 2%.Moreover,the addition of hydrogen peroxide(H2O2)could further improve the dye and antibiotic degradation efficiencies.The reinforced photocatalytic and photo-Fenton degradation performance were primarily attributable to the introduction of BWO,which afforded increased active sites,expanded the solar spectral response range,and accelerated the cycle of Cu(Ⅱ)/Cu(Ⅰ);after four cycling times,its catalytic activity did not decrease significantly.In addition,reasonable hypotheses of the photocatalytic and photo-Fenton catalytic mechanisms were formulated.This study is expected to provide a visual approach for designing a novel photo-Fenton catalyst to jointly utilize the photocatalytic and Fenton activities,which can be better applied to the purification of residual organics in wastewater.
基金National Nature Science Foundation of China(50972107,51172165)Zhejinag Province Key Scientific and Technological Innovations Team of China(2009R50010)+1 种基金Key Foundation of Zhejiang Province Natural Science Foundation of China(Z4110347)Wenzhou Municipal Science and Technology Bureau Key Program(G20090082)
基金financially supported by the Foundation of Special Scientific Research Institutes(No.2013EG115002)the Innovation Foundation of General Research Institute for Nonferrous Metals(No.52215).
文摘Cu2ZnSnS4 thin films were prepared by cosputtering with Cu(or Cu2S),ZnS and SnS2 targets in this study.S amount in the precursor of Cu2ZnSnS4 thin film was verified by using Cu or Cu2S target.The effect of S amount in the precursor on the microstructure and element distribution of Cu2ZnSnS4 thin film was discussed.It was found that S content is sufficient in the precursor thin film using Cu2 S instead of Cu target.The microstructure,composition homogeneity,and secondary phase formation of the Cu2ZnSnS4 thin film are seriously affected by S amount in the precursor thin film.Namely,sufficient S can improve the crystallization and orientation of the precursor thin film and enhance the compactness as well as composition homogeneity of the Cu2ZnSnS4 thin film after sulfurization.Moreover,the secondary phase formation in Cu2ZnSnS4 thin film can be greatly inhibited by increasing S content in the precursor thin film.
