The first wall (FW) is one of the core components in ITER. As the heat sink material, the CuCrZr alloy shall be properly jointed with beryllium and stainless steel. At present, the grains of CuCrZr are prone to coar...The first wall (FW) is one of the core components in ITER. As the heat sink material, the CuCrZr alloy shall be properly jointed with beryllium and stainless steel. At present, the grains of CuCrZr are prone to coarsen seriously in the thermal cycle process of FW manufacturing, which has become a critical issue for ITER parties. To investigate the mirostructure and mechanical properties of the optimized CuCrZr alloy in the first wall fabricating thermal cycle, simulative experiments have been done in this study. The alloy ingot was forged and hot rolled into plates, and then solid solution annealed, cold rolled and aged for strengthening. Several heat treatments were done to the CuCrZr samples, and the changes of microstructure, micro-hardness and tensile strength were investigated. The results indicated that the original elongated grains had changed into equiaxed ones, and the vickers hardness had declined to about 60 after experiencing the process of CuCrZr/316L(N) bi-metallic plate manufacturing, either by hot isostatic pressing at a higher temperature or by explosion welding followed by solution annealing. Joining Be/CuCrZr by hot isostatic pressing acts as an aging process for CuCrZr, so after the simulated heat treatment, the hardness of the alloy increased to about 110 HV and the tensile yield strength at 250℃ rose to about 170 MPa. Meanwhile, the average grain size was controlled below 200μm.展开更多
The mixed nanostructure mainly consisting of nanotwins and nanograins was obtained in a solid solution CuCrZr alloy by means of dynamic plastic deformation at cryogenic temperature.After subsequent aging treatments,th...The mixed nanostructure mainly consisting of nanotwins and nanograins was obtained in a solid solution CuCrZr alloy by means of dynamic plastic deformation at cryogenic temperature.After subsequent aging treatments,the precipitation of Cr at nanometer scale provided further strengthening and brought substantial recovery of electrical conductivity.The aged nanostructured CuCrZr alloy exhibited a high tensile strength of 832MPa and a high electrical conductivity of 71.2%IACS.The details of precipitation tuned by nanotwin boundaries were demonstrated in this work.The combined strengthening of nanostructures and nanoprecipitates was discussed.展开更多
基金supported by the International Nuclear Thermonuclear Experimental Reactor(ITER)Specific Program of China(No.2014GB126000)
文摘The first wall (FW) is one of the core components in ITER. As the heat sink material, the CuCrZr alloy shall be properly jointed with beryllium and stainless steel. At present, the grains of CuCrZr are prone to coarsen seriously in the thermal cycle process of FW manufacturing, which has become a critical issue for ITER parties. To investigate the mirostructure and mechanical properties of the optimized CuCrZr alloy in the first wall fabricating thermal cycle, simulative experiments have been done in this study. The alloy ingot was forged and hot rolled into plates, and then solid solution annealed, cold rolled and aged for strengthening. Several heat treatments were done to the CuCrZr samples, and the changes of microstructure, micro-hardness and tensile strength were investigated. The results indicated that the original elongated grains had changed into equiaxed ones, and the vickers hardness had declined to about 60 after experiencing the process of CuCrZr/316L(N) bi-metallic plate manufacturing, either by hot isostatic pressing at a higher temperature or by explosion welding followed by solution annealing. Joining Be/CuCrZr by hot isostatic pressing acts as an aging process for CuCrZr, so after the simulated heat treatment, the hardness of the alloy increased to about 110 HV and the tensile yield strength at 250℃ rose to about 170 MPa. Meanwhile, the average grain size was controlled below 200μm.
基金supported by the Ministry of Science&Technology of China(No.2017YFA0204401)the Chinese Academy of Sciences(No.zdyz201701)+3 种基金the Liaoning Revitalization Talents Program(No.XLYC1808008)the National Natural Science Foundation of China(Nos.51501192 and 51771196)the Fundamental Research Funds for the Central Universities(No.3072019CF1017)the Key Research Program of Frontier Science,Chinese Academy of Sciences.
文摘The mixed nanostructure mainly consisting of nanotwins and nanograins was obtained in a solid solution CuCrZr alloy by means of dynamic plastic deformation at cryogenic temperature.After subsequent aging treatments,the precipitation of Cr at nanometer scale provided further strengthening and brought substantial recovery of electrical conductivity.The aged nanostructured CuCrZr alloy exhibited a high tensile strength of 832MPa and a high electrical conductivity of 71.2%IACS.The details of precipitation tuned by nanotwin boundaries were demonstrated in this work.The combined strengthening of nanostructures and nanoprecipitates was discussed.