Co-precipitation is an important issue in chemical analysis, where it is often undesirable, but in some cases, it can be exploited. The Zn0.5Mn0.5−xLi2xFe2O4 nanomaterials (x = 0.0, 0.1, 0.2, 0.3 and 0.4) wa...Co-precipitation is an important issue in chemical analysis, where it is often undesirable, but in some cases, it can be exploited. The Zn0.5Mn0.5−xLi2xFe2O4 nanomaterials (x = 0.0, 0.1, 0.2, 0.3 and 0.4) was afforded by utilizing co-precipitation method. The structural and optical characteristics were analyzed for the samples employing X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FTIR) and Ultraviolet-visible spectrophotometer (UV-Vis). XRD revealed that the structure of certain nanoparticles is a cubic spinel with space group (Fd-3m) and crystallite size in the scale 124 - 150 nm. Lattice parameter was determined to increments with Li+1 and that may occur due to the larger ionic radius of the Li1+ ion. FTIR spectroscopy confirmed the form of spinel ferrite and explicated the properties of absorption bands approximately 593, 1111, 1385, 1640, 2922 and 3430. The energy band gap was estimated for all samples with diverse ratios and was observed in the range of 2.58 - 2.52 eV.展开更多
Flexible multifunctional polymer-based electromagnetic interference(EMI)shielding composite films have important application values in the fields of 5G communication technology,wearable electronic devices and artifici...Flexible multifunctional polymer-based electromagnetic interference(EMI)shielding composite films have important application values in the fields of 5G communication technology,wearable electronic devices and artificial intelligence.In this work,Fe_(3)O_(4)/polyamic acid(PAA)nanofiber films are prepared by in-situ polymerization and electrospinning technology,and Ti_(3)C_(2)T_(x)nanosheets are deposited on the surface of the Fe_(3)O_(4)/PAA nanofiber films via vacuum-assisted filtration.Then,Janus Ti_(3)C_(2)T_(x)-(Fe_(3)O_(4)/polyimide(PI))composite films are obtained by thermal imidization.The two sides of the Janus films exhibit completely different properties.The Fe_(3)O_(4)/PI side has excellent hydrophobicity and insulation property,and the Ti_(3)C_(2)T_(x)side has hydrophilicity and terrific conductivity.When the mass fraction of Ti_(3)C_(2)T_(x)is 80 wt.%,the Janus Ti_(3)C_(2)T_(x)-(Fe_(3)O_(4)/PI)composite film has excellent EMI shielding performances and mechanical properties,with EMI shielding effectiveness,tensile strength and Young’s modulus reaching 66 dB,114.5 MPa and 5.8 GPa,respectively.At the same time,electromagnetic waves show different absorption shielding effectiveness(SEA)when incident from two sides of the Janus films.When the electromagnetic waves are incident from the Fe_(3)O_(4)/PI side,the SEA of the Janus film is 58 dB,much higher than that when the electromagnetic waves are incident from the Ti_(3)C_(2)T_(x)side(39 dB).In addition,the Ti_(3)C_(2)T_(x)side of the Janus Ti_(3)C_(2)T_(x)-(Fe_(3)O_(4)/PI)composite films also has excellent electrothermal and photothermal conversion performances.When the applied voltage is 4 V,the stable surface temperature reaches 108°C;when it is irradiated by simulated sunlight with power density of 200 mW/cm2,the stable surface temperature reaches 95℃.展开更多
Surface-enhanced Raman scattering(SERS)spectroscopy has been employed as a rapid analysis technology for food security inspection recently.Nowadays,it is still a great challenge to rapidly quantify multiple trace anti...Surface-enhanced Raman scattering(SERS)spectroscopy has been employed as a rapid analysis technology for food security inspection recently.Nowadays,it is still a great challenge to rapidly quantify multiple trace antibiotics potentially abused in aquaculture industry.In this work,a magnetic Ti_(3)C_(2)T_(x)/Fe_(3)O_(4)/Ag substrate was prepared for the development of a reliable rapid SERS quantification method for multiple trace sulfonamides in aquatic products.This magnetic substrate had good uniformity,reproducibility,stability and SERS activity.Moreover,this substrate could integrate the magnetic separation-enrichment and matrix clean-up without cross contamination,which endowed it with good selectivity and antiinterference capability during real sample analysis.The electromagnetic enhancement and chemical enhancement mechanism of this magnetic substrate were studied in detail to reveal its good separationenrichment performance and SERS activity.Finally,a rapid SERS quantification method was established and practically applied for trace phthalic sulfathiazole(PST)and silver sulfadiazine(SSD)in aquatic products by using Ti_(3)C_(2)T_(x)/Fe_(3)O_(4)/Ag magnetic substrates.Trace PST and SSD could be actually detected and quantified as 55.9μg/kg and 64.0μg/kg in aquatic products,respectively.Good recoveries of 83.9%-116%with relative standard deviations(RSDs)of 0.5%-3.2%for PST and 80.2%-102%with RSDs of 1.3%-5.8%for SSD were obtained.This work proposed an efficient and reliable method for rapid quantification of trace multiple sulfonamides in complex aquatic samples during food security inspection.展开更多
Graphitic carbon nitride(g-C_(3)N_(4))-based materials are regarded as one of the most potential photocatalysts for utilizing solar energy.In this work,we reported a facile one step in-situ hydrothermal-roasting metho...Graphitic carbon nitride(g-C_(3)N_(4))-based materials are regarded as one of the most potential photocatalysts for utilizing solar energy.In this work,we reported a facile one step in-situ hydrothermal-roasting method for preparing honeycomb-like g-C_(3)N_(4)/CeO_(2) nanosheets with abundant oxygen vacancies(g-C_(3)N_(4)/CeO_(2)-x).The hydrothermal-roasting and incomplete-sealed state can(i)generate an in-situ reducing atmosphere(CO,N2,NH3) to tune the concentration of oxygen vacancies in CeO_(2);(ii) beneficial to prevent continuous growth of g-C_(3)N_(4) and results in honeycomb-like g-C_(3)N_(4)/CeO_(2)-x hybrid nanosheets.What is more,the g-C_(3)N_(4)/CeO_(2)-x photocatalyst exhibited extended photoresponse range,increased specific surface area and obviously enhanced separation efficiency of photogenerated electron-hole pairs.As a proof-of-concept application,the optimized g-C_(3)N_(4)/CeO_(2)-xnanosheets could achieve 98% removal efficiency for Cr(Ⅵ) under visible light irradiation(λ≥420 nm)within 2.5 h,which is significantly better than those of pure g-C_(3)N_(4) and CeO_(2).This work provides a new idea for more rationally designing and constructing g-C_(3)N_(4)-based catalysts for efficient extended photochemical application.展开更多
The Li_(4+x)Al_xSi_(1-x)O_(4-y)Al_2O_3 (x = 0 to 0.5, y = 0 to 0.5) ionconductors were prepared by the Sol-Gel method and examined in detail. The powder and sinteredsamples were characterized by TG-DTA, XRD, SEM, and ...The Li_(4+x)Al_xSi_(1-x)O_(4-y)Al_2O_3 (x = 0 to 0.5, y = 0 to 0.5) ionconductors were prepared by the Sol-Gel method and examined in detail. The powder and sinteredsamples were characterized by TG-DTA, XRD, SEM, and AC impedance techniques. The experimentalresults show that the conductivity and sinterability increase with the amount of excess Al_2O_3 inthe silicate. The particle size of the powder samples is about 0.13 μm. The maximum conductivity at18 ℃ is 3.057 * 10^(-5) s/cm for Li_(4.4)Al_(0.4)Si_(0.6)O_4-0.3 Al_2O_3.展开更多
NASICON型快离子导体Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)(LATP)具有较高的离子电导率、较宽的电化学窗口及良好的水和空气稳定性,但其界面接触性能差。石榴石型Li_(7)La_(3)Zr_(2)O_(12)(LLZO)锂离子电导率高、电化学窗口较宽且热稳定...NASICON型快离子导体Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)(LATP)具有较高的离子电导率、较宽的电化学窗口及良好的水和空气稳定性,但其界面接触性能差。石榴石型Li_(7)La_(3)Zr_(2)O_(12)(LLZO)锂离子电导率高、电化学窗口较宽且热稳定性好,但其立方相结构不稳定,影响其实际应用。采用溶液浇筑法,制备纯PVDF-LiTFSI电解质膜和以PVDF为基、3种不同质量比的Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)的固态电解质膜,并探讨纯PVDF-LiTFSI电解质膜和3种不同质量比的活性无机电解质填料对复合固态电解质离子电导率的影响。结果表明,Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)质量比为1∶1时,电解质膜的XRD图谱的衍射峰比纯PVDF-LiTFSI下降更为明显,电化学窗口为3.9 V左右,表现出更好的稳定性。在不同温度下分别测量其离子电导率发现,Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)质量比为1∶1时的电解质膜均高于纯PVDF-LiTFSI电解质膜和Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)质量比为2∶1和3∶1时的电解质膜。将其装配成电池后发现,0.1C下电池首次充放电比容量分别为90 m A·h/g和87 m A·h/g。以0.5C的电流循环25圈,放电比容量从57 mA·h/g衰减至51mA·h/g,容量保持率为99.7%。所以,以PVDF为基、Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)质量比为1∶1的固态电解质膜有优良的倍率性能和循环稳定性能。展开更多
文摘Co-precipitation is an important issue in chemical analysis, where it is often undesirable, but in some cases, it can be exploited. The Zn0.5Mn0.5−xLi2xFe2O4 nanomaterials (x = 0.0, 0.1, 0.2, 0.3 and 0.4) was afforded by utilizing co-precipitation method. The structural and optical characteristics were analyzed for the samples employing X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FTIR) and Ultraviolet-visible spectrophotometer (UV-Vis). XRD revealed that the structure of certain nanoparticles is a cubic spinel with space group (Fd-3m) and crystallite size in the scale 124 - 150 nm. Lattice parameter was determined to increments with Li+1 and that may occur due to the larger ionic radius of the Li1+ ion. FTIR spectroscopy confirmed the form of spinel ferrite and explicated the properties of absorption bands approximately 593, 1111, 1385, 1640, 2922 and 3430. The energy band gap was estimated for all samples with diverse ratios and was observed in the range of 2.58 - 2.52 eV.
基金supports from the National Natural Science Foundation of China(Nos.U21A2093 and 51903145)Fundamental Research Funds for the Central Universities(No.D5000210627)+1 种基金Y.L.Z.would like to thank the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(No.CX2021107)This work is also financially supported by Polymer Electromagnetic Functional Materials Innovation Team of Shaanxi Sanqin Scholars.
文摘Flexible multifunctional polymer-based electromagnetic interference(EMI)shielding composite films have important application values in the fields of 5G communication technology,wearable electronic devices and artificial intelligence.In this work,Fe_(3)O_(4)/polyamic acid(PAA)nanofiber films are prepared by in-situ polymerization and electrospinning technology,and Ti_(3)C_(2)T_(x)nanosheets are deposited on the surface of the Fe_(3)O_(4)/PAA nanofiber films via vacuum-assisted filtration.Then,Janus Ti_(3)C_(2)T_(x)-(Fe_(3)O_(4)/polyimide(PI))composite films are obtained by thermal imidization.The two sides of the Janus films exhibit completely different properties.The Fe_(3)O_(4)/PI side has excellent hydrophobicity and insulation property,and the Ti_(3)C_(2)T_(x)side has hydrophilicity and terrific conductivity.When the mass fraction of Ti_(3)C_(2)T_(x)is 80 wt.%,the Janus Ti_(3)C_(2)T_(x)-(Fe_(3)O_(4)/PI)composite film has excellent EMI shielding performances and mechanical properties,with EMI shielding effectiveness,tensile strength and Young’s modulus reaching 66 dB,114.5 MPa and 5.8 GPa,respectively.At the same time,electromagnetic waves show different absorption shielding effectiveness(SEA)when incident from two sides of the Janus films.When the electromagnetic waves are incident from the Fe_(3)O_(4)/PI side,the SEA of the Janus film is 58 dB,much higher than that when the electromagnetic waves are incident from the Ti_(3)C_(2)T_(x)side(39 dB).In addition,the Ti_(3)C_(2)T_(x)side of the Janus Ti_(3)C_(2)T_(x)-(Fe_(3)O_(4)/PI)composite films also has excellent electrothermal and photothermal conversion performances.When the applied voltage is 4 V,the stable surface temperature reaches 108°C;when it is irradiated by simulated sunlight with power density of 200 mW/cm2,the stable surface temperature reaches 95℃.
基金financially supported by the National Natural Science Foundation of China(Nos.22074161 and 21976213)Guangdong Basic and Applied Basic Research Foundation(No.2019A1515010107)+3 种基金the Science and Technology Planning Project of Guangzhou City(No.202102080167)the Research and Development Plan for Key Areas of Food Safety in Guangdong Province of China(No.2019B020211001)the National Key Research and Development Program of China(No.2019YFC1606101)the State Key Program of National Natural Science of China(No.22134007)。
文摘Surface-enhanced Raman scattering(SERS)spectroscopy has been employed as a rapid analysis technology for food security inspection recently.Nowadays,it is still a great challenge to rapidly quantify multiple trace antibiotics potentially abused in aquaculture industry.In this work,a magnetic Ti_(3)C_(2)T_(x)/Fe_(3)O_(4)/Ag substrate was prepared for the development of a reliable rapid SERS quantification method for multiple trace sulfonamides in aquatic products.This magnetic substrate had good uniformity,reproducibility,stability and SERS activity.Moreover,this substrate could integrate the magnetic separation-enrichment and matrix clean-up without cross contamination,which endowed it with good selectivity and antiinterference capability during real sample analysis.The electromagnetic enhancement and chemical enhancement mechanism of this magnetic substrate were studied in detail to reveal its good separationenrichment performance and SERS activity.Finally,a rapid SERS quantification method was established and practically applied for trace phthalic sulfathiazole(PST)and silver sulfadiazine(SSD)in aquatic products by using Ti_(3)C_(2)T_(x)/Fe_(3)O_(4)/Ag magnetic substrates.Trace PST and SSD could be actually detected and quantified as 55.9μg/kg and 64.0μg/kg in aquatic products,respectively.Good recoveries of 83.9%-116%with relative standard deviations(RSDs)of 0.5%-3.2%for PST and 80.2%-102%with RSDs of 1.3%-5.8%for SSD were obtained.This work proposed an efficient and reliable method for rapid quantification of trace multiple sulfonamides in complex aquatic samples during food security inspection.
基金the National Natural Science Foundation of China(Nos.21103024,61171008)Natural Science Foundation of Zhejiang Province(No.LY19B060006)+1 种基金National Key Research and Development Program of China(No.2018YFB1502900)Technology Development Project of Jiaxing University(No.70518047)。
文摘Graphitic carbon nitride(g-C_(3)N_(4))-based materials are regarded as one of the most potential photocatalysts for utilizing solar energy.In this work,we reported a facile one step in-situ hydrothermal-roasting method for preparing honeycomb-like g-C_(3)N_(4)/CeO_(2) nanosheets with abundant oxygen vacancies(g-C_(3)N_(4)/CeO_(2)-x).The hydrothermal-roasting and incomplete-sealed state can(i)generate an in-situ reducing atmosphere(CO,N2,NH3) to tune the concentration of oxygen vacancies in CeO_(2);(ii) beneficial to prevent continuous growth of g-C_(3)N_(4) and results in honeycomb-like g-C_(3)N_(4)/CeO_(2)-x hybrid nanosheets.What is more,the g-C_(3)N_(4)/CeO_(2)-x photocatalyst exhibited extended photoresponse range,increased specific surface area and obviously enhanced separation efficiency of photogenerated electron-hole pairs.As a proof-of-concept application,the optimized g-C_(3)N_(4)/CeO_(2)-xnanosheets could achieve 98% removal efficiency for Cr(Ⅵ) under visible light irradiation(λ≥420 nm)within 2.5 h,which is significantly better than those of pure g-C_(3)N_(4) and CeO_(2).This work provides a new idea for more rationally designing and constructing g-C_(3)N_(4)-based catalysts for efficient extended photochemical application.
基金theNaturalScienceFoundationofHebeiProvince (No .2 96 16 9)
文摘The Li_(4+x)Al_xSi_(1-x)O_(4-y)Al_2O_3 (x = 0 to 0.5, y = 0 to 0.5) ionconductors were prepared by the Sol-Gel method and examined in detail. The powder and sinteredsamples were characterized by TG-DTA, XRD, SEM, and AC impedance techniques. The experimentalresults show that the conductivity and sinterability increase with the amount of excess Al_2O_3 inthe silicate. The particle size of the powder samples is about 0.13 μm. The maximum conductivity at18 ℃ is 3.057 * 10^(-5) s/cm for Li_(4.4)Al_(0.4)Si_(0.6)O_4-0.3 Al_2O_3.
文摘NASICON型快离子导体Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)(LATP)具有较高的离子电导率、较宽的电化学窗口及良好的水和空气稳定性,但其界面接触性能差。石榴石型Li_(7)La_(3)Zr_(2)O_(12)(LLZO)锂离子电导率高、电化学窗口较宽且热稳定性好,但其立方相结构不稳定,影响其实际应用。采用溶液浇筑法,制备纯PVDF-LiTFSI电解质膜和以PVDF为基、3种不同质量比的Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)的固态电解质膜,并探讨纯PVDF-LiTFSI电解质膜和3种不同质量比的活性无机电解质填料对复合固态电解质离子电导率的影响。结果表明,Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)质量比为1∶1时,电解质膜的XRD图谱的衍射峰比纯PVDF-LiTFSI下降更为明显,电化学窗口为3.9 V左右,表现出更好的稳定性。在不同温度下分别测量其离子电导率发现,Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)质量比为1∶1时的电解质膜均高于纯PVDF-LiTFSI电解质膜和Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)质量比为2∶1和3∶1时的电解质膜。将其装配成电池后发现,0.1C下电池首次充放电比容量分别为90 m A·h/g和87 m A·h/g。以0.5C的电流循环25圈,放电比容量从57 mA·h/g衰减至51mA·h/g,容量保持率为99.7%。所以,以PVDF为基、Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)和Li_(1+x)Al_(x)Ti_(2-x)(PO_(4))_(3)质量比为1∶1的固态电解质膜有优良的倍率性能和循环稳定性能。
