Porous silica nano-flowers stabilized Pt-Pd bimetallic nanoparticles as heterogeneous catalyst for efficiently synthesizing guaiacol from 2-methoxycyclohexanol

Porous silica nano-flowers(KCC-1)immobilized Pt-Pd alloy NPs(Pt-Pd/KCC-1)with different mass ratios of Pd and Pt were successfully prepared by a facile in situ one-step reduction,using hydrazinium hydroxide as a reducing agent.The as-synthesized silica nanospheres possess radial fibers with a distance of 15 nm,exhibiting a high specific surface area(443.56 m^(2)·g^(-1)).Meanwhile,the obtained Pt-Pd alloy NPs are uniformly dispersed on the silica surface with a metallic particle size of 4-6 nm,which exist as metallic Pd and Pt on the surface of monodisperse KCC-1,showing the transfer of electrons from Pd to Pt.The as-synthesized 2.5%Pt-2.5%Pd/KCC-1 exhibited excellent catalytic activity and stability for the continuous dehydrogenation of 2-methoxycyclohexanol to prepare guaiacol.Compared with Pt or Pd single metal supported catalysts,the obtained 2.5%Pt-2.5%Pd/KCC-1 shows 97.2%conversion rate of 2-methoxycyclohexanol and 76.8%selectivity for guaiacol,which attributed to the significant synergistic effect of bimetallic Pt-Pd alloy NPs.Furthermore,turn over frequency value of the obtained 2.5%Pt-2.5%Pd/KCC-1 NPs achieved 4.36 s^(-1),showing higher catalytic efficiency than other two monometallic catalysts.Reaction pathways of dehydro-aromatization of 2-methoxycyclohexanol over the obtained catalyst are proposed.Consequently,the obtained 2.5%Pt-2.5%Pd/KCC-1 NPs prove their potential in the dehydrogenation of 2-methoxycyclohexanol,while the kinetics and mechanistic study of the dehydrogenation reaction over the catalyst in a continuous fixed-bed reactor may provide valuable information for the development of green,outstanding and powerful synthetic pathway of guaiacol.

Effect of Mo and ZrO_(2)nanoparticles addition on interfacial properties and shear strength of Sn58Bi/Cu solder joint

The influence of Mo and ZrO_(2)nanoparticles addition on the interfacial properties and shear strength of Sn58Bi solder joint was investigated.The interfacial microstructures of Sn58Bi/Cu,Sn58Bi+Mo/Cu and Sn58Bi+ZrO_(2)/Cu solder joints were analysed using a scanning electron microscope(SEM)coupled with energy dispersive X-ray(EDX)and the X-ray diffraction(XRD).Intermetallic compounds(IMCs)of MoSn_(2)are detected in the Sn58Bi+Mo/Cu solder joint,while SnZr,Zr_(5)Sn_(3),ZrCu and ZrSn_(2)are detected in Sn58Bi+ZrO_(2)/Cu solder joint.IMC layers for both composite solders comprise of Cu_(6)Sn_(5) and Cu_(3)Sn.The SEM images of these layers were used to measure the IMC layer’s thickness.The average IMC layer’s thickness is 1.4431μm for Sn58Bi+Mo/Cu and 0.9112μm for Sn58Bi+ZrO_(2)/Cu solder joints.Shear strength of the solder joints was investigated via the single shear lap test method.The average maximum load and shear stress of the Sn58Bi+Mo/Cu and Sn58Bi+ZrO_(2)/Cu solder joints are increased by 33%and 69%,respectively,as compared to those of the Sn58Bi/Cu solder joint.By comparing both composite solder joints,the latter prevails better as adding smaller sized ZrO_(2)nanoparticles improves the interfacial properties granting a stronger solder joint.

Selective CO_(2)Electroreduction to Multi-Carbon Products on Organic-Functionalized CuO Nanoparticles by Local Micro-Environment Modulation

Surface functionalization of Cu-based catalysts has demonstrated promising potential for enhancing the electrochemical CO_(2)reduction reaction(CO_(2)RR)toward multi-carbon(C2+)products,primarily by suppressing the parasitic hydrogen evolution reaction and facilitating a localized CO_(2)/CO concentration at the electrode.Building upon this approach,we developed surface-functionalized catalysts with exceptional activity and selectivity for electrocatalytic CO_(2)RR to C_(2+)in a neutral electrolyte.Employing CuO nanoparticles coated with hexaethynylbenzene organic molecules(HEB-CuO NPs),a remarkable C_(2+)Faradaic efficiency of nearly 90%was achieved at an unprecedented current density of 300 mA cm^(-2),and a high FE(>80%)was maintained at a wide range of current densities(100-600 mA cm^(-2))in neutral environments using a flow cell.Furthermore,in a membrane electrode assembly(MEA)electrolyzer,86.14%FEC2+was achieved at a partial current density of 387.6 mA cm^(-2)while maintaining continuous operation for over 50 h at a current density of 200 mA cm^(-2).In-situ spectroscopy studies and molecular dynamics simulations reveal that reducing the coverage of coordinated K⋅H2O water increased the probability of intermediate reactants(CO)interacting with the surface,thereby promoting efficient C-C coupling and enhancing the yield of C_(2+)products.This advancement offers significant potential for optimizing local micro-environments for sustainable and highly efficient C_(2+)production.

Al_(2)O_(3) nanoparticles as surface modifier enables deposition of high quality perovskite films for ultra-flexible photovoltaics

Advanced photovoltaics,such as ultra-flexible perovskite solar cells(UF-PSCs),which are known for their lightweight design and high power-to-mass ratio,have been a long-standing goal that we,as humans,have continuously pursued.Unlike normal PSCs fabricated on rigid substrates,producing high-efficiency UF-PSCs remains a challenge due to the difficulty in achieving full coverage and minimizing defects of metal halide perovskite(MHP)films.In this study,we utilized Al_(2)O_(3) nanoparticles(NPs)as an inorganic surface modifier to enhance the wettability and reduce the roughness of poly-bis(4-phenyl)(2,4,6-trimethylphenyl)amine simultaneously.This approach proves essentials in fabricating UF-PSCs,enabling the deposition of uniform and dense MHP films with full coverage and fewer defects.We systematically investigated the effect of Al_(2)O_(3) NPs on film formation,combining simulation with experiments.Our strategy not only significantly increases the power conversion efficiency(PCE)from 11.96%to 16.33%,but also promotes reproducibility by effectively addressing the short circuit issue commonly encountered in UF-PSCs.Additionally,our UF-PSCs demonstrates good mechanical stability,maintaining 98.6%and 79.0%of their initial PCEs after 10,000 bending cycles with radii of 1.0 and 0.5 mm,respectively.

Active Cu and Fe Nanoparticles Codecorated Ruddlesden-Popper-Type Perovskite as Solid Oxide Electrolysis Cells Cathode for CO_(2)Splitting

Solid oxide electrolysis cells(SOECs),displaying high current density and energy efficiency,have been proven to be an effective technique to electrochemically reduce CO_(2)into CO.However,the insufficiency of cathode activity and stability is a tricky problem to be addressed for SOECs.Hence,it is urgent to develop suitable cathode materials with excellent catalytic activity and stability for further practical application of SOECs.Herein,a reduced perovskite oxide,Pr_(0.35)Sr_(0.6)Fe_(0.7)Cu_(0.2)Mo_(0.1)O_(3-δ)(PSFCM0.35),is developed as SOECs cathode to electrolyze CO_(2).After reduction in 10%H_(2)/Ar,Cu and Fe nanoparticles are exsolved from the PSFCM0.35 lattice,resulting in a phase transformation from cubic perovskite to Ruddlesden-Popper(RP)perovskite with more oxygen vacancies.The exsolved metal nanoparticles are tightly attached to the perovskite substrate and afford more active sites to accelerate CO_(2)adsorption and dissociation on the cathode surface.The significantly strengthened CO_(2)adsorption capacity obtained after reduction is demonstrated by in situ Fourier transform-infrared(FT-IR)spectra.Symmetric cells with the reduced PSFCM0.35(R-PSFCM0.35)electrode exhibit a low polarization resistance of 0.43Ωcm^(2)at 850℃.Single electrolysis cells with the R-PSFCM0.35 cathode display an outstanding current density of 2947 mA cm^(-2)at 850℃and 1.6 V.In addition,the catalytic stability of the R-PSFCM0.35 cathode is also proved by operating at 800℃with an applied constant current density of 600 mA cm^(-2)for 100 h.

Electron-enriched single-Pd-sites on g-C_(3)N_(4) nanosheets achieved by in-situ anchoring twinned Pd nanoparticles for efficient CO_(2) photoreduction

Modulating electronic structures of single-atom metal cocatalysts is vital for highly active photoreduction of CO_(2),and it's especially challenging to develop a facile method to modify the dispersion of atomical photocatalytic sites.We herein report an ion-loading pyrolysis route to in-situ anchor Pd single atoms as well as twinned Pd nanoparticles on ultra-thin graphitic carbon nitride nanosheets(PdTP/Pd_(SA)-CN)for high-efficiency photoreduction of CO_(2).The anchored Pd twinned nanoparticles donate electrons to adjacent single Pd–N_(4) sites through the carbon nitride networks,and the optimized PdTP/Pd_(SA)-CN photocatalyst exhibits a CO evolution rate up to 46.5μmol g^(-1) h^(-1) with nearly 100%selectivity.As revealed by spectroscopic and theoretical analyses,the superior photocatalytic activity is attributed to the lowered desorption barrier of carbonyl species at electron-enriched Pd single atoms,together with the improved efficiencies of light-harvesting and charge separation/transport.This work has demonstrated the engineering of the electron density of single active sites with twinned metal nanoparticles assisted by strong electronic interaction with the support of the atomic metal,and unveiled the underlying mechanism for expedited photocatalytic efficiency.

Improvement of the piezoelectricity of PVDF-HFP by CoFe_(2)O_(4)nanoparticles

High piezoelectric composite films composed of poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)and ferromagnetic cobalt ferrite(CoFe_(2)O_(4))(0.00 wt%to 0.2 wt%)are prepared by a solution casting method accompanied by uniaxial stretching and high electric field poling.The decisive effect of the poling electric field on the power generating capability was confirmed by the experiments.For pure PVDF-HFP films,when the maximum electric field Emax is 120 MV/m,the calibrated open circuit voltage reaches 2.93 V,which is much higher than those poled at lower electric fields(70 MV/m:1.41 V;90 MV/m:2.11 V).Furthermore,the addition of CoFe_(2)O_(4)also influences the piezoelectricity dramatically.In the samples containing 0.15 wt%CoFe_(2)O_(4),the calibrated open circuit voltage increases to the maximum value of 3.57 V.Meanwhile,the relative fraction of theβ-phase and the crystallinity degree are 99%and 48%,respectively.The effects of CoFe_(2)O_(4)nanoparticles on initial crystallization,uniaxial stretching and high electric field poling are investigated by XRD,FTIR and DSC.

The Capture and Catalytic Conversion of CO_(2) by Dendritic Mesoporous Silica-Based Nanoparticles

Dendritic mesoporous silica nanoparticles own three-dimensional center-radial channels and hierarchical pores,which endows themselves with super-high specific surface area,extremely large pore volumes,especially accessible internal spaces,and so forth.Dissimilar guest species(such as organic groups or metal nanoparticles)could be readily decorated onto the interfaces of the channels and pores,realizing the functionalization of dendritic mesoporous silica nanoparticles for targeted applications.As adsorbents and catalysts,dendritic mesoporous silica nanoparticles-based materials have experienced nonignorable development in CO_(2)capture and catalytic conversion.This comprehensive review provides a critical survey on this pregnant subject,summarizing the designed construction of novel dendritic mesoporous silica nanoparticles-based materials,the involved chemical reactions(such as CO_(2)methanation,dry reforming of CH_(4)),the value-added chemicals from CO_(2)(such as cyclic carbonates,2-oxazolidinones,quinazoline-2,4(1H,3H)-diones),and so on.The adsorptive and catalytic performances have been compared with traditional silica mesoporous materials(such as SBA-15 or MCM-41),and the corresponding reaction mechanisms have been thoroughly revealed.It is sincerely expected that the in-depth discussion could give materials scientists certain inspiration to design brand-new dendritic mesoporous silica nanoparticles-based materials with superior capabilities towards CO_(2)capture,utilization,and storage.

Effect of TiB_(2) Nanoparticles on Microstructure and Mechanical Properties of Ni_(60)Cr_(21)Fe_(19) Alloy in Rapid Directional Solidification Process:Molecular Dynamics Study

Molecular dynamics(MD)simulations are employed to delve into the multifaceted effects of TiB_(2) nanoparticles on the intricate grain refinement mechanism,microstructural evolution,and tensile performance of Inconel 718 superalloys during the rapid directional solidification.Specifically,the study focuses on elucidating the role of TiB2 nanoparticles in augmenting the nucleation rate during the rapid directional solidification process of Ni_(60)Cr_(21)Fe_(19) alloy system.Furthermore,subsequent tensile simulations are conducted to comprehensively evaluate the anisotropic behavior of tensile properties within the solidified microstructures.The MD results reveal that the incorporation of TiB₂nanoparticles during the rapid directional solidification of the Ni_(60)Cr_(21)Fe_(19) significantly enhances the average nucleation rate,escalating it from 1.27×10^(34)m^(-3)·s^(-1)to 2.55×10^(34)m^(-3)·s^(-1).Notably,within the face centered cube(FCC)structure,Ni atoms exhibit pronounced compositional segregation,and the solidified alloy maintains an exceptionally high dislocation density reaching up to 10^(16)m^(-2).Crucially,the rapid directional solidification process imparts a distinct microstructural anisotropy,leading to a notable disparity in tensile strength.Specifically,the tensile strength along the solidification direction is markedly superior to that perpendicular to it.This disparity arises from different deformation mechanisms under varying loading orientations.Tensile stress perpendicular to the solidification direction encourages the formation of smooth and organized mechanical twins.These twins act as slip planes,enhancing dislocation mobility and thereby improving stress relaxation and dispersion.Moreover,the results underscore the profound strengthening effect of TiB_(2) nanoparticles,particularly in enhancing the tensile strength along the rapid directional solidification direction.

Functionalized selenium nanoparticles ameliorated acetaminophen-induced hepatotoxicity through synergistically triggering PKCδ/Nrf2 signaling pathway and inhibiting CYP 2E1

Selenium nanoparticles(SeNPs)have been demonstrated potential for use in diseases associated with oxidative stress.Functionalized SeNPs with lower toxicity and higher biocompatibility could bring better therapeutic activity and clinical application value.Herein,this work was conducted to investigate the protective effect of Pleurotus tuber-regium polysaccharide-protein complex funtionnalized SeNPs(PTR-SeNPs)against acetaminophen(APAP)-induced oxidative injure in HepG2 cells and C57BL/6J mouse liver.Further elucidation of the underlying molecular mechanism,in particular their modulation of Nrf2 signaling pathway was also performed.The results showed that PTR-SeNPs could significantly ameliorate APAP-induced oxidative injury as evidenced by a range of biochemical analysis,histopathological examination and immunoblotting study.PTR-SeNPs could hosphorylate and activate PKCδ,depress Keap1,and increase nuclear accumulation of Nrf2,resulting in upregulation of GCLC,GCLM,HO-1 and NQO-1 expression.Besides,PTR-SeNPs suppressed the biotransformation of APAP to generate intracellular ROS through CYP 2E1 inhibition,restoring the mitochondrial morphology.Furthermore,the protective effect of PTR-SeNPs against APAP induced hepatotoxicity was weakened as Nrf2 was depleted in vivo,indicating the pivotal role of Nrf2 signaling pathway in PTR-SeNPs mediated hepatoprotective efficacy.Being a potential hepatic protectant,PTR-SeNPs could serve as a new source of selenium supplement for health-promoting and biomedical applications.

Experimental investigation of the effects of oil asphaltene content on CO_(2) foam stability in the presence of nanoparticles and sodium dodecyl sulfate

Foam stability tests were performed using sodium dodecyl sulfate(SDS)surfactant and SiO2 nanoparticles as foaming system at different asphaltene concentrations,and the half-life of CO_(2) foam was measured.The mechanism of foam stability reduction in the presence of asphaltene was analyzed by scanning electron microscope(SEM),UV adsorption spectrophotometric concentration measurement and Zeta potential measurement.When the mass ratio of synthetic oil to foam-formation suspension was 1:9 and the asphaltene mass fraction increased from 0 to 15%,the half-life of SDS-stabilized foams decreased from 751 s to 239 s,and the half-life of SDS/silica-stabilized foams decreased from 912 s to 298 s.When the mass ratio of synthetic oil to foam-formation suspension was 2:8 and the asphaltene mass fraction increased from 0 to 15%,the half-life of SDS-stabilized foams decreased from 526 s to 171 s,and the half-life of SDS/silica-stabilized foams decreased from 660 s to 205 s.In addition,due to asphaltene-SDS/silica interaction in the aqueous phase,the absolute value of Zeta potential decreases,and the surface charges of particles reduce,leading to the reduction of repulsive forces between two interfaces of thin liquid film,which in turn,damages the foam stability.

单步电沉积法制备CuInS_2薄膜

采用单步电沉积法在Mo基底上制备了高质量的CuInS2薄膜.用X射线衍射仪(XRD)和扫描电子显微镜(SEM)表征了样品的结构和形貌,研究了沉积电位、退火温度、pH值、反应物浓度等工艺条件对制备的CuInS2薄膜形貌、组分及性能的影响.制备的CuInS2薄膜致密平整,呈黄铜矿结构,晶粒大小为1-2μm.用紫外-可见光分光光度计测试了其光学性能,计算得到常温下禁带宽度为1.41eV,非常适合用作薄膜太阳电池的吸收层材料.

TiO_2 nanoparticles prepared by hydrochloric acid leaching of mechanically activated and carbothermic reduced ilmenite

A new combination method consisting of ball milling, carbothermic reduction and hydrochloric acid leaching was proposed for the preparation of nanosized synthetic rutile from natural ilmenite. The ball milling was employed to grind ilmenite into small particles. The carbothermic reduction was carried out to yield a high titanium slag, which would be easily purified by subsequent leaching procedure. Factors affecting the hydrochloric acid process, namely the leaching time, temperature, and acid concentration, were studied. After leaching and calcining the milled and annealed mixture of FeTiO3/C under the optimal conditions, the TiO2 nanoparticles with size of 10-200 nm and purity〉98.0% were obtained.

Integrated process of large-scale and size-controlled SnO_2 nanoparticles by hydrothermal method

SnO2 nanoparticles with the average particle size of 5-30 nm were synthesized using SnCl4·5H2O as the precursor and NH3·H2O as the mineralizing agent by hydrothermal method.In the case of 1 kg/batch production,the effects of synthesis conditions including solution concentration,reaction temperature,pressure,time and pH value on the grain size,particle morphology and crystal structure of SnO2 were systematically studied.The particles were characterized by X-ray diffraction（XRD） and transmission electron microscopy（TEM）.The results show that,the particle size can be well controlled in the range of 5-30 nm by adjusting the processing parameters such as reaction temperature and time when the crystal structure and particle morphology remain unchanged.The previous reports,the unusual dependences of the grain size of SnO2 on reaction temperature and time were found.The mechanism for such abnormal grain growth behavior was tentatively elucidated.

Fabrication of Cu_2O@Cu_2O core-shell nanoparticles and conversion to Cu_2O@Cu core-shell nanoparticles in solution

Cu2O@Cu2O core-shell nanoparticles (NPs) were prepared by using solution phase strategy. It was found that Cu2O@Cu2O NPs were easily converted to Cu2O@Cu NPs with the help of polyvinylpyrrolidine (PVP) and excessive ascorbic acid (AA) in air at room temperature, which was an interesting phenomenon. The features of the two kinds of NPs were characterized by XRD, TEM and extinction spectra. Cu2O@Cu NPs with different shell thicknesses showed wide tunable optical properties for the localized surface plasmon (LSP) in metallic Cu. But Cu2O@Cu2O NPs did not indicate this feature. FTIR results reveal that Cu+ ions on the surface of Cu2O shell coordinate with N and O atoms in PVP and are further reduced to metallic Cu by excessive AA and then form a nucleation site on the surface of Cu2O nanocrystalline. PVP binds onto different sites to proceed with the reduction utill all the Cu sources in Cu2O shell are completely assumed.

Effects of reaction parameters on preparation of Cu nanoparticles via aqueous solution reduction method with NaBH_4

The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions for preparing well-dispersed nanoparticles were found as follows: 0.4 mol/L NaBH4 was added into solution containing 0.2 mol/L Cu2+, 1.0% gelatin dispersant in mass fraction, and 1.2 mol/L NH3?H2O at pH 12 and 313 K. In addition, a series of experiments were performed to discover the reaction process. NH3?H2O was found to be able to modulate the reaction process. At pH=10, Cu2+ was transformed to Cu(NH3)42+ as precursor after the addition of NH3?H2O, and then Cu(NH3)42+ was reduced by NaBH4 solution. At pH=12, Cu2+ was transformed to Cu(OH)2 as precursor after the addition of NH3?H2O, and Cu(OH)2 was then reduced by NaBH4 solution.

MXene纳米颗粒Ti_(3)C_(2)T_(X)与光热效应促进糖尿病小鼠创面愈合

背景:MXene纳米颗粒具备出色的亲水性、生物相容性和抗菌特性,被广泛应用于创面、肿瘤、神经修复和心血管等治疗领域,目前尚不清楚MXene纳米颗粒对糖尿病创面愈合的作用。目的:考察MXene纳米颗粒Ti_(3)C_(2)T_(x)的体外抗氧化、抗炎和光热抗菌活性,以及对糖尿病小鼠创面的修复效果。方法:①体外实验:采用MTT法检测不同质量浓度Ti_(3)C_(2)T_(x)对小鼠成纤维细胞(NIH-3T3)的毒性作用。将NIH-3T3细胞暴露在H_(2)O_(2)中,采用MTT法检测不同质量浓度Ti_(3)C_(2)T_(x)对NIH-3T3细胞的保护作用。将NIH-3T3细胞暴露在H_(2)O_(2)中,分析光照(或不光照)处理下Ti_(3)C_(2)T_(x)(20μg/mL)对NIH-3T3细胞活性氧生成的影响。将RAW264.7巨噬细胞分3组处理:对照组、脂多糖组与脂多糖+Ti_(3)C_(2)T_(x)组,采用实时定量PCR法检测细胞中特定基因(CD86、白细胞介素6、CD206、精氨酸酶1)的表达。将大肠杆菌(或金黄色葡萄球菌)分3组处理:对照组、Ti_(3)C_(2)T_(x)组、Ti_(3)C_(2)T_(x)光照组,利用平板菌落计数法计算细菌存活率。②体内实验:通过腹腔注射链脲佐菌素的方法构建ICR小鼠糖尿病模型,造模成功后在小鼠背部建立全层皮肤缺损创面,随机分3组干预:对照组(n=6)、Ti_(3)C_(2)T_(x)组(n=6)和Ti_(3)C_(2)T_(x)光照组(n=6),观察创面愈合情况,干预后第7天进行创面组织CD31、CD206免疫组化染色,干预后第7,14天进行创面组织苏木精-伊红与Masson染色。将Ti_(3)C_(2)T_(x)溶液注射至ICR小鼠皮下,在光照(或非光照)后,通过血生化检测分析Ti_(3)C_(2)T_(x)对小鼠的毒性作用。结果与结论:①体外实验:Ti_(3)C_(2)T_(x)质量浓度在5-160μg/mL范围内对NIH-3T3细胞无毒性作用,在质量浓度20μg/mL时可增加NIH-3T3细胞存活率。10-80μg/mL的Ti_(3)C_(2)T_(x)可显著提升H_(2)O_(2)干预下的NIH-3T3细胞存活率。Ti_(3)C_(2)T_(x)可显著抑制H_(2)O_(2)干预下NIH-3T3细胞活性氧的生成,光照处理可进一步提升Ti_(3)C_(2)T_(x)抑制活性氧生成的作用。Ti_(3)C_(2)T_(x)能够有效抑制由脂多糖诱导的巨噬细胞炎症,促进细胞向具有抗炎特性的M2型巨噬细胞转化。Ti_(3)C_(2)T_(x)与Ti_(3)C_(2)T_(x)光照均可显著抑制大肠杆菌和金黄色葡萄球菌的生长,并且Ti_(3)C_(2)T_(x)光照的抑制效果更显著。②体内实验:创面大体与组织学分析显示,Ti_(3)C_(2)T_(x)与Ti_(3)C_(2)T_(x)光照均可促进糖尿病小鼠创面的愈合,并且Ti_(3)C_(2)T_(x)光照的促进作用更显著。免疫组化染色结果显示,Ti_(3)C_(2)T_(x)与Ti_(3)C_(2)T_(x)光照均可抑制糖尿病创面的炎症反应并促进血管的生成,并且Ti_(3)C_(2)T_(x)光照的作用更显著。血生化检测结果显示,Ti_(3)C_(2)T_(x)与光照对小鼠无明显毒性作用。③结果表明,Ti_(3)C_(2)T_(x)借助独特的光热效应能够高效地展现抗氧化、抗炎和抗菌特性,促进糖尿病小鼠创面的愈合。

贻贝启发接枝骨形态发生蛋白2成骨活性肽的介孔生物玻璃修复股骨髁缺损

背景:骨形态发生蛋白2在胚胎发育、骨骼形成和再生修复中具有重要作用,但高剂量应用与癌症发病密切相关。骨形态发生蛋白2成骨活性段L20能够有效减少癌症等不良反应,并可显著促进骨组织再生。目的:将骨形态发生蛋白2活性肽段以贻贝衍生肽模拟策略接枝在介孔生物玻璃表面,探究其对组织工程成骨性能的影响。方法:(1)采用模板法合成介孔生物玻璃纳米颗粒,采用一步法合成负载骨形态发生蛋白2成骨活性肽L20的介孔生物玻璃纳米颗粒,表征负载骨形态发生蛋白2成骨活性肽L20介孔活性玻璃纳米颗粒的形貌与体外缓释性能。(2)分离提取SD大鼠骨髓间充质干细胞,传2代后分别与PBS(空白组)、介孔生物玻璃纳米颗粒(对照组)、负载骨形态发生蛋白2成骨活性肽L20介孔生物玻璃纳米颗粒(实验组)共培养,采用细胞活死荧光染色和CCK-8法检测细胞毒性和细胞增殖,扫描电镜观察细胞黏附;成骨诱导分化后,进行碱性磷酸酶染色、茜素红S染色与成骨相关基因表达检测。(3)取15只SD大鼠,建立双侧股骨髁缺损模型,采用随机数字表法分为3组:空白组(n=5)不植入任何材料,对照组(n=5)植入介孔生物玻璃纳米颗粒,实验组(n=5)植入负载骨形态发生蛋白2成骨活性肽L20介孔生物玻璃纳米颗粒。术后8周,进行股骨Micro-CT扫描与组织形态观察。结果与结论:(1)扫描电镜下可见负载骨形态发生蛋白2成骨活性肽L20介孔生物玻璃纳米颗粒为球形、单分散颗粒,透射电镜下可见其具有多孔结构,平均粒径为(268.10±0.58) nm,体外可缓释L20。(2)负载骨形态发生蛋白2成骨活性肽L20介孔生物玻璃纳米颗粒无细胞毒性,并且可促进骨髓间充质干细胞的增殖与黏附;与空白组、对照组相比,实验组碱性磷酸酶活性与细胞外基质矿化能力均升高(P <0.05),碱性磷酸酶、Runx2、骨钙素mRNA表达升高(P <0.05)。(3)股骨Micro-CT扫描结果显示,与空白组、对照组相比,实验组新生骨量与骨密度均升高(P <0.05);苏木精-伊红与Masson染色结果显示,与空白组、对照组相比,实验组新骨生成与胶原纤维均增加。(4)结果表明,负载骨形态发生蛋白2活性肽L20介孔生物玻璃纳米颗粒具有良好的生物相容性及体内外促成骨性能,可促进SD大鼠股骨髁缺损的再生修复。

Preparation and photocatalytic performance of Cu-doped TiO_2 nanoparticles

Cu-doped TiO2 nanoparticles with different doping contents from 0 to 2.0% （mole fraction） were synthesized through sol-gel method. X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and field emission scanning electron microscope （FE-SEM） were used to characterize the crystalline structure, chemical valence states and morphology of TiO2 nanoparticles. UV-Vis absorption spectrum was used to measure the optical absorption property of the samples. The photocatalytic performance of the samples was characterized by degrading 20 mg/L methyl orange under UV-Vis irradiation. The results show that the Cu-doped TiO2 nanoparticles exhibit a significant increase in photocatalytic performance over the pure TiO2 nanoparticles, and the TiO2 nanoparticles doped with 1.0% Cu show the best photocatalytic performance. The improvement in photocatalytic performance is attributed to the enhanced light adsorption in UV-Vis range and the decrease of the recombination rate of photoinduced electron-hole oair of the Cu-doped TiO2 nanoparticles.

铜薄膜上喷雾热解法制备CuInS_2薄膜

采用在真空蒸镀的Cu薄膜上喷雾热解InCl3和SC(NH2)2前驱液的方法,制备出CuInS2(CIS)薄膜。通过X射线衍射、紫外-可见分光光度计、扫描电子微镜和霍尔效应测试仪等仪器对薄膜进行了表征。研究表明,该方法制备出的CIS薄膜,表面均匀且无裂纹缺陷,薄膜内不存在CuxS、In2O3、In2S3等杂相。CIS薄膜为黄铜矿结构,可见光范围内吸收系数达到105cm-1。厚度506nm的CIS薄膜的禁带宽度为1.54eV。电阻率和载流子浓度分别达到10-1Ω·cm和1019cm-3,为p型半导体薄膜。