Local segregation in Cu-In precursors and its effects on the element distribution and microstructures of selenized CuInSe2 thin films were investigated. Cu-In precursors with an ideal total mole ratio of Cu to In of 0...Local segregation in Cu-In precursors and its effects on the element distribution and microstructures of selenized CuInSe2 thin films were investigated. Cu-In precursors with an ideal total mole ratio of Cu to In of 0.92 were prepared by middle frequency alternating current magnetron sputtering with Cu-In alloy target, then CuInSe2 absorbers for solar cells were formed by selenization process in selenium atmosphere. Scanning electron microscope and energy dispersive X-ray spectroscope were used respectively to observe the surface morphologies and determine the compositions of both Cu-In precursors and CuInSe2 thin films. Their microstructures were characterized by X-ray diffractometry and Raman spectroscope. The results show that Cu-In precursors are mainly composed of (Cu11In9) phase with In-rich solid solution. Stoichiometric CuInSe2 thin films with a homogeneous element distribution and single chalcopyrite phase can be synthesized from a segregated Cu-In precursor film with an ideal total mole ratio of Cu to In of 0.92. CuInSe2 thin film shows P-type conductivity and its resistivity reaches 1.2×103Ω·cm.展开更多
The strong anisotropic electrical properties of one-dimensional(1 D) nanostructure semiconductors,especially the anisotropic carrier transport, have a negative and significant influence on the performance of solar cel...The strong anisotropic electrical properties of one-dimensional(1 D) nanostructure semiconductors,especially the anisotropic carrier transport, have a negative and significant influence on the performance of solar cells if the nanostructures have random orientation. Considering the advantages of nanorod solar cells in carrier transport, we have achieved growth of vertically aligned Sb_(2)Se_(3) nanorod array with highly(hk1) orientation on Cd S substrate, and constructed superstrate nanorod solar cells for the first time. The Sb_(2)Se_(3) nanorod array solar cells exhibit the more efficient and long-range carrier transport in vertical direction. Furthermore, in order to suppress interface recombination, a CuInSe_(2) quantum dots(QDs) sensitizer has been applied to fill the volume between the nanorods completely, thus forming an interpenetrating nanocomposite structure. The CuInSe_(2) QDs can harvest additional light by absorption of visible light and contribute photocurrent. Meantime, the QDs function as a hole transport material and thus reduce the dependence of lateral transport. Consequently, the interpenetrating nanocomposite CuInSe_(2) / Sb_(2)Se_(3) solar cells display a power conversion efficiency of 7.54% with significant enhancements in the short-circuit current density and open-circuit voltage over pure Sb_(2)Se_(3) nanorod cells. This is the highest efficiency for superstrate solar cells based on Sb_(2)Se_(3) nanorod arrays.展开更多
基金Project(2004AA513023) supported by the National High Technology Research and Development Program of China
文摘Local segregation in Cu-In precursors and its effects on the element distribution and microstructures of selenized CuInSe2 thin films were investigated. Cu-In precursors with an ideal total mole ratio of Cu to In of 0.92 were prepared by middle frequency alternating current magnetron sputtering with Cu-In alloy target, then CuInSe2 absorbers for solar cells were formed by selenization process in selenium atmosphere. Scanning electron microscope and energy dispersive X-ray spectroscope were used respectively to observe the surface morphologies and determine the compositions of both Cu-In precursors and CuInSe2 thin films. Their microstructures were characterized by X-ray diffractometry and Raman spectroscope. The results show that Cu-In precursors are mainly composed of (Cu11In9) phase with In-rich solid solution. Stoichiometric CuInSe2 thin films with a homogeneous element distribution and single chalcopyrite phase can be synthesized from a segregated Cu-In precursor film with an ideal total mole ratio of Cu to In of 0.92. CuInSe2 thin film shows P-type conductivity and its resistivity reaches 1.2×103Ω·cm.
基金financially supported by the National Key R&D Program of China (Grant No. 2019YFB1503400)the National Natural Science Foundation of China (Grant No. 61804064)the Natural Science Foundation of Guangdong Province (Grant No.2019A1515011616)。
文摘The strong anisotropic electrical properties of one-dimensional(1 D) nanostructure semiconductors,especially the anisotropic carrier transport, have a negative and significant influence on the performance of solar cells if the nanostructures have random orientation. Considering the advantages of nanorod solar cells in carrier transport, we have achieved growth of vertically aligned Sb_(2)Se_(3) nanorod array with highly(hk1) orientation on Cd S substrate, and constructed superstrate nanorod solar cells for the first time. The Sb_(2)Se_(3) nanorod array solar cells exhibit the more efficient and long-range carrier transport in vertical direction. Furthermore, in order to suppress interface recombination, a CuInSe_(2) quantum dots(QDs) sensitizer has been applied to fill the volume between the nanorods completely, thus forming an interpenetrating nanocomposite structure. The CuInSe_(2) QDs can harvest additional light by absorption of visible light and contribute photocurrent. Meantime, the QDs function as a hole transport material and thus reduce the dependence of lateral transport. Consequently, the interpenetrating nanocomposite CuInSe_(2) / Sb_(2)Se_(3) solar cells display a power conversion efficiency of 7.54% with significant enhancements in the short-circuit current density and open-circuit voltage over pure Sb_(2)Se_(3) nanorod cells. This is the highest efficiency for superstrate solar cells based on Sb_(2)Se_(3) nanorod arrays.