为了解决传统变换器电压增益低的问题,将Boost变换器与Cuk变换器进行并联集成,并利用耦合电感倍压技术提高变换器的电压增益。设计而成的高增益耦合电感组合Boost-Cuk变换器保留了Cuk变换器输出电流的连续性,新型结构中使用无源钳位来...为了解决传统变换器电压增益低的问题,将Boost变换器与Cuk变换器进行并联集成,并利用耦合电感倍压技术提高变换器的电压增益。设计而成的高增益耦合电感组合Boost-Cuk变换器保留了Cuk变换器输出电流的连续性,新型结构中使用无源钳位来吸收漏感能量,对寄生电容与漏感谐振引起的电压尖峰起到约束作用,降低了开关管的电压应力。描述了变换器电感电流连续模式(Continuous current mode,CCM)下的运行特点,并进行了该变换器的参数设计。最后,通过搭建一台100 W的试验样机来求证理论的正确性。展开更多
Aiming at the traditional CUK equalizer can only perform energy equalization between adjacent batteries,if the two single batteries that need to be equalized are far away from each other,there will be the problem of l...Aiming at the traditional CUK equalizer can only perform energy equalization between adjacent batteries,if the two single batteries that need to be equalized are far away from each other,there will be the problem of longer energy transmission path and lower equalization efficiency,this paper optimizes the CUK equalizer and optimizes its peripheral selection circuit,which can support the equalization of single batteries at any two positions.The control strategy adopts the open-circuit voltage(OVC)of the battery and the state of charge(SOC)of the battery as the equalization variables,and selects the corresponding equalization variables according to the energy conditions of the two batteries that need to be equalized,and generates the adaptive equalization current with an adaptive PID controller in order to improve the equalization efficiency.Simulation modeling is performed in Matlab/Simulink 2021b,and the experimental results show that the optimized CUK equalizer in this paper improves the equalization time by 25.58%compared with the traditional CUK equalizer.In addition,compared with the mean value difference(MVD)method,the adaptive PID method reduces the equalization time by about 30%in the static and charging and discharging experimental environments,which verifies the superiority of this equalization scheme.展开更多
This paper presents a power factor corrected (PFC) new bridgeless (BL) Cuk Topologies for low power applications. A BL configuration of Cuk converter is proposed which eliminates the usage of diode bridge rectifier at...This paper presents a power factor corrected (PFC) new bridgeless (BL) Cuk Topologies for low power applications. A BL configuration of Cuk converter is proposed which eliminates the usage of diode bridge rectifier at the front end of the PFC converter, thus reducing the switching and conduction losses coupled with it. This new BL Cuk converter has two semiconductors switches. The current flow during each switching cycle interval of the converter reduces the conduction losses compared to the conventional Cuk PFC converter. It also reduces the input current ripple and Electromagnetic Interference (EMI). The inrush current during the starting period is limited and the input, output currents of the converter are continuous with minimum current ripple. Hence it is preferred mostly compared to other PFC circuits. The proposed topology works in the Discontinuous Conduction Mode (DCM) with simple control circuitry to achieve almost a unity power factor with less distortion in the input AC current. The switching of the power switches is done under zero current. The proposed PFC topologies are theoretically investigated and performance comparisons are made with the conventional rectifiers. The proposed PFC converter is simulated in MATLAB/SIMULINK with Fuzzy Logic Controller (FLC) and results are demonstrated to evaluate the effectiveness of the controller.展开更多
文摘为了解决传统变换器电压增益低的问题,将Boost变换器与Cuk变换器进行并联集成,并利用耦合电感倍压技术提高变换器的电压增益。设计而成的高增益耦合电感组合Boost-Cuk变换器保留了Cuk变换器输出电流的连续性,新型结构中使用无源钳位来吸收漏感能量,对寄生电容与漏感谐振引起的电压尖峰起到约束作用,降低了开关管的电压应力。描述了变换器电感电流连续模式(Continuous current mode,CCM)下的运行特点,并进行了该变换器的参数设计。最后,通过搭建一台100 W的试验样机来求证理论的正确性。
基金Natural Science Foundation of China(51677058)Scientific Research Program of Hubei Provincial Department of Education(T2021005).
文摘Aiming at the traditional CUK equalizer can only perform energy equalization between adjacent batteries,if the two single batteries that need to be equalized are far away from each other,there will be the problem of longer energy transmission path and lower equalization efficiency,this paper optimizes the CUK equalizer and optimizes its peripheral selection circuit,which can support the equalization of single batteries at any two positions.The control strategy adopts the open-circuit voltage(OVC)of the battery and the state of charge(SOC)of the battery as the equalization variables,and selects the corresponding equalization variables according to the energy conditions of the two batteries that need to be equalized,and generates the adaptive equalization current with an adaptive PID controller in order to improve the equalization efficiency.Simulation modeling is performed in Matlab/Simulink 2021b,and the experimental results show that the optimized CUK equalizer in this paper improves the equalization time by 25.58%compared with the traditional CUK equalizer.In addition,compared with the mean value difference(MVD)method,the adaptive PID method reduces the equalization time by about 30%in the static and charging and discharging experimental environments,which verifies the superiority of this equalization scheme.
文摘This paper presents a power factor corrected (PFC) new bridgeless (BL) Cuk Topologies for low power applications. A BL configuration of Cuk converter is proposed which eliminates the usage of diode bridge rectifier at the front end of the PFC converter, thus reducing the switching and conduction losses coupled with it. This new BL Cuk converter has two semiconductors switches. The current flow during each switching cycle interval of the converter reduces the conduction losses compared to the conventional Cuk PFC converter. It also reduces the input current ripple and Electromagnetic Interference (EMI). The inrush current during the starting period is limited and the input, output currents of the converter are continuous with minimum current ripple. Hence it is preferred mostly compared to other PFC circuits. The proposed topology works in the Discontinuous Conduction Mode (DCM) with simple control circuitry to achieve almost a unity power factor with less distortion in the input AC current. The switching of the power switches is done under zero current. The proposed PFC topologies are theoretically investigated and performance comparisons are made with the conventional rectifiers. The proposed PFC converter is simulated in MATLAB/SIMULINK with Fuzzy Logic Controller (FLC) and results are demonstrated to evaluate the effectiveness of the controller.
