This paper presents a new current-mode single input multi output (SIMO) type biquad employing one voltage differencing transconductance amplifier (VDTA), two grounded capacitors and a single grounded resistor. The con...This paper presents a new current-mode single input multi output (SIMO) type biquad employing one voltage differencing transconductance amplifier (VDTA), two grounded capacitors and a single grounded resistor. The configuration realizes all basic filter functions (i.e. Low Pass (LP), High Pass (HP), Band Pass (BP), Notch (BR) and All Pass (AP)). The natural frequency (ω0) and bandwidth (BW) are independently tunable. The workability of proposed configuration has been verified using SPICE simulation with TSMC CMOS 0.18 μm process parameters.展开更多
This article presents a low voltage low power configuration of current differencing transconductance amplifier（CDTA）based on floating gate MOSFET.The proposed CDTA variant operates at lower supply voltage±1.4 V...This article presents a low voltage low power configuration of current differencing transconductance amplifier（CDTA）based on floating gate MOSFET.The proposed CDTA variant operates at lower supply voltage±1.4 V with total static power dissipation of 2.60 mW due to the low voltage feature of floating gate MOSFET.High transconductance up to 6.21 mA/V is achieved with extended linear range of the circuit i.e.±130μA.Two applications are illustrated to demonstrate the effectiveness of the proposed active block.A quadrature oscillator is realized using FGMOS based CDTA,two capacitors,and a resistor.The resistor is implemented using two NMOSFETs to provide high linearity and tunablility.Another application is the Schmitt trigger circuit based on the proposed CDTA variant.All circuits are simulated by using SPICE and TSMC 130 nm technology.展开更多
A switched capacitor biquad filter using current differencing transconductance amplifier (CDTA) is presented in this paper. The proposed circuit employs only one CDTA, two virtually grounded capacitors and one switche...A switched capacitor biquad filter using current differencing transconductance amplifier (CDTA) is presented in this paper. The proposed circuit employs only one CDTA, two virtually grounded capacitors and one switched capacitor. It is a resistorless circuit, so it is beneficial to IC implementation in terms of space consideration. The proposed circuit is a second order single input multiple output (SIMO) current-mode filter. This filter can simultaneously realize all basic filter functions high pass, low pass and band pass responses without any component-matching conditions. All the active and passive sensitivities are low. The natural angular frequency (ω0) and quality factor (Q) of proposed filter can be electronically controlled. Owing to current mode operation it consumes less power. PSPICE simulation results are used to verify the theoretical analysis.展开更多
This work presents a novel current-mode (CM) lossless integrator that uses one current differencing differential input transconductance amplifier (CDDITA) and one grounded capacitor. The configuration based on single ...This work presents a novel current-mode (CM) lossless integrator that uses one current differencing differential input transconductance amplifier (CDDITA) and one grounded capacitor. The configuration based on single active element has several advantages from the aspect of monolithic integration, few are: reduced power consumption, chip miniaturization. Employment of grounded capacitor is also beneficial for monolithic integration. Specifying some of the key features of integrator proposed are: 1) purely resistorless, 2) electronically tunable, 3) current output available at the port having high impedance, and 4) excellent performance under non-ideal conditions. So, a resister-less current mode lossy integrator with electronic control employing single CDDITA has been proposed in this paper. The verification of workability of the proposed current mode integrator is well explained by the help of SPICE simulations using TSMC CMOS 0.18 μm technology node.展开更多
This paper presents a higher order voltage and current mode low pass or high pass filter for wave active filter based on Voltage Differencing Transconductance Amplifiers (VDTAs). The wave equivalent variable technique...This paper presents a higher order voltage and current mode low pass or high pass filter for wave active filter based on Voltage Differencing Transconductance Amplifiers (VDTAs). The wave equivalent variable technique and topological simulation as well as operational realization using wave variables techniques are proposed for basic active building blocks of wave active filters. The proposed wave equivalent technique is employed for wave active filter with the proper selection of the terminal connections. This work presented the basic element for the realizing wave active filter is the series inductor with parallel grounded capacitor. The proposed wave active filter is verified by realizing a 4th order low pass and high pass Butterworth filter with minimum power consumption at ±0.82 V using SPICE simulation with 0.18 μm TSMC CMOS technology parameters.展开更多
文摘This paper presents a new current-mode single input multi output (SIMO) type biquad employing one voltage differencing transconductance amplifier (VDTA), two grounded capacitors and a single grounded resistor. The configuration realizes all basic filter functions (i.e. Low Pass (LP), High Pass (HP), Band Pass (BP), Notch (BR) and All Pass (AP)). The natural frequency (ω0) and bandwidth (BW) are independently tunable. The workability of proposed configuration has been verified using SPICE simulation with TSMC CMOS 0.18 μm process parameters.
文摘This article presents a low voltage low power configuration of current differencing transconductance amplifier（CDTA）based on floating gate MOSFET.The proposed CDTA variant operates at lower supply voltage±1.4 V with total static power dissipation of 2.60 mW due to the low voltage feature of floating gate MOSFET.High transconductance up to 6.21 mA/V is achieved with extended linear range of the circuit i.e.±130μA.Two applications are illustrated to demonstrate the effectiveness of the proposed active block.A quadrature oscillator is realized using FGMOS based CDTA,two capacitors,and a resistor.The resistor is implemented using two NMOSFETs to provide high linearity and tunablility.Another application is the Schmitt trigger circuit based on the proposed CDTA variant.All circuits are simulated by using SPICE and TSMC 130 nm technology.
文摘A switched capacitor biquad filter using current differencing transconductance amplifier (CDTA) is presented in this paper. The proposed circuit employs only one CDTA, two virtually grounded capacitors and one switched capacitor. It is a resistorless circuit, so it is beneficial to IC implementation in terms of space consideration. The proposed circuit is a second order single input multiple output (SIMO) current-mode filter. This filter can simultaneously realize all basic filter functions high pass, low pass and band pass responses without any component-matching conditions. All the active and passive sensitivities are low. The natural angular frequency (ω0) and quality factor (Q) of proposed filter can be electronically controlled. Owing to current mode operation it consumes less power. PSPICE simulation results are used to verify the theoretical analysis.
文摘This work presents a novel current-mode (CM) lossless integrator that uses one current differencing differential input transconductance amplifier (CDDITA) and one grounded capacitor. The configuration based on single active element has several advantages from the aspect of monolithic integration, few are: reduced power consumption, chip miniaturization. Employment of grounded capacitor is also beneficial for monolithic integration. Specifying some of the key features of integrator proposed are: 1) purely resistorless, 2) electronically tunable, 3) current output available at the port having high impedance, and 4) excellent performance under non-ideal conditions. So, a resister-less current mode lossy integrator with electronic control employing single CDDITA has been proposed in this paper. The verification of workability of the proposed current mode integrator is well explained by the help of SPICE simulations using TSMC CMOS 0.18 μm technology node.
文摘This paper presents a higher order voltage and current mode low pass or high pass filter for wave active filter based on Voltage Differencing Transconductance Amplifiers (VDTAs). The wave equivalent variable technique and topological simulation as well as operational realization using wave variables techniques are proposed for basic active building blocks of wave active filters. The proposed wave equivalent technique is employed for wave active filter with the proper selection of the terminal connections. This work presented the basic element for the realizing wave active filter is the series inductor with parallel grounded capacitor. The proposed wave active filter is verified by realizing a 4th order low pass and high pass Butterworth filter with minimum power consumption at ±0.82 V using SPICE simulation with 0.18 μm TSMC CMOS technology parameters.
