Surface current field and seasonal variability in the Kuroshio and adjacent regions derived from satellite-tracked drifter data

The muhiyear averaged surface current field and seasonal variability in the Kuroshio and adjacent regions are studied. The data used are trajectories and （1/4） ° latitude by （1/4） ° longitude mean currents derived from 323 Argos drifters deployed by Chinese institutions and world ocean circulation experiment from 1979 to 2003. The results show that the Kuroshio surface path adapts well to the western boundary topography and exhibits six great turnings. The branching occurs frequently near anticyclonic turnings rather than near cyclonic ones. In the Luzon Strait, the surface water intrusion into the South China Sea occurs only in fall and winter. The Kuroshio surface path east of Taiwan, China appears nearly as straight lines in summer, fall, and winter, when anticyclonic eddies coexist on its right side; while the path may cyclonically turning in spring when no eddy exists. The Kuroshio intrusion northeast of Taiwan often occurs in fall and winter, but not in summer. The running direction, width and velocity of the middle segment of the Kuroshio surface currents in the East China Sea vary seasonally. The northward intrusion of the Kuroshio surface water southwest of Kyushu occurs in spring and fall, but not in summer. The northmost position of the Kuroshio surface path southwest of Kyushu occurs in fall, but never goes beyond 31 °N. The northward surface current east of the Ryukyu Islands exists only along Okinawa-Amami Islands from spring to fall. In particular, it appears as an arm of an anti- cyclonic eddy in fall.

2-D Current Field Numerical Simulation Integrating Yangtze Estuary with Hangzhou Bay

In this paper, integrating the Yangtze Estuary with the Hangzhou Bay, a 2-D velocity field model is established. In the model, fine self-adaptive grids are employed to adapt to the complicated coastal shape. The hydrodynamic equations satisfied by two contravariant components of velocity vector and surface elevation in non-orthogonal curvilinear coordinates are used. In each momentum equation the coefficients before the two partial derivatives of surface elevation with respect to variables of alternative direction coordinates have different orders of magnitude, i. e., the derivative with the larger coefficient may play a more important role than that with the smaller one. With this advantage, the ADI scheme can be easily employed. The hydrodynamic factors include tidal current, river runoff and wind-induced current. In terms of tidal current, seven main constituents in the area are considered in the open boundaries. The verifications of surface elevation process and current velocity process in the spring tide and in the neap tide show that the model can preferably reflect current fields in the area. Through the simulation of Lagrangian residual current fields in summer and in winter, the paths of the exchange of water and sediment between the Yangtze Estuary and the Hangzhou Bay are elementarily discussed.

Measurements of ocean wave and current field using dual polarized X-band radar

A new ocean wave and sea surface current monitoring system with horizontally-(HH) and vertically-(VV) polarized X-band radar was developed.Two experiments into the use of the radar system were carried out at two sites,respectively,for calibration process in Zhangzi Island of the Yellow Sea,and for validation in the Yellow Sea and South China Sea.Ocean wave parameters and sea surface current velocities were retrieved from the dual polarized radar image sequences based on an inverse method.The results obtained from dual-polarized radar data sets acquired in Zhangzi Island are compared with those from an ocean directional buoy.The results show that ocean wave parameters and sea surface current velocities retrieved from radar image sets are in a good agreement with those observed by the buoy.In particular,it has been found that the vertically-polarized radar is better than the horizontally-polarized radar in retrieving ocean wave parameters,especially in detecting the significant wave height below 1.0 m.

The relationship between tidal current field and sediment transport in the Huanghai Sea and the Bohai Sea

-Based on a two-dimensional numerical M2 tidal model of the Huanghai and Bohai Seas, sediment transport of particles with different sizes in the computational area is given. It is concluded that tidal currents play an important role in sediment transport and deposition in the Huanghai and Bohai Seas.

A three-dimentional model of the northeast East China Sea, with application to the M2 current field

A simple three-dimensional tidal model is used to examine the M2 tidal current distribution in a northeastern part of the East China Sea, especially the vertical variation of the current in the region. Computed M2 current is compared with observations available and found to be in good agreement.Main features of the calculating method in this study are: (1) Vertical variation of the tidal current is taken as a funetion of the depth-mean velocity: (2) the method is applicable to a variety of the vertical eddy viscosities; (3) it has a fine vertical resolution, especially near the sea bootom. So, this method not only enables us to get a steady state solution easily but also depicts effects of the friction on the vertical variation of the current much better.

New Method for 3D Transient Eddy Current Field Calculation and Its Application in Magneto-Acoustic Tomography

A new method of 3D transient eddy current field calculation is proposed. The Maxwell equations with time component elimination （METCE） are derived under the assumption of magnetic quasi static approximation, especially for the sample of low conductivity. Based on METCE, we deduce a more efficient reconstruction algorithm of a 3D transient eddy current field. The computational burden is greatly reduced through the new algorithm, and the computational efficiency is improved. This new algorithm decompounds the space-time variables into two individual variables. The idea is to solve the spatial vector component firstly, and then multiply it by the corresponded time component. The iterative methods based on METCE are introduced to recover the distribution of conductivity in magneto-acoustic tomography. The reconstructed images of conductivity are consistent with the original distribution, which validate the new method.

Radial tidal current field in a semi-enclosed rectangular basin: formation and evolution

The radial tidal current field accounts for the formation of the radial sand ridges in the South Yellow Sea. Understanding the formation and evolution of this radial tidal current field is vital to assessing the morphodynamic features in the area. A semi-enclosed rectangular basin with and without a coastal barrier was schematized from the topography of the Bohai Sea and Yellow Sea. The 2D tidal current field in this basin was simulated using the DELFT3D-FLOW model. The concept of tidal wave refraction, which highlights the effect of the sloped or stepped submarine topography on the propagation of the tidal waves, was introduced to explain the formation of the radial tidal current field. Under the effect of tidal wave refraction, co-phase lines of the counterclockwise rotating tidal wave and incident tidal wave are transformed into clockwise and counterclockwise deflections, respectively, leading to the convergence and divergence of the flow field. Regardless of whether a coastal barrier exists or not, the outer radial tidal current field might emerge over certain topography. The responses of the radial tidal current field in this basin to the environmental variations such as coastline changes and bottom erosions were discussed. Results show that local protrusion near the focal point of the radial tidal current field will have limited effects on the location of the tidal system. However, a remarkable shift of the amphidromic point toward the entrance and central axis of this basin and a movement of the focal point of the radial tidal current field toward the entrance could be caused by the significant seaward coastline advance and submarine slope erosion.

Derivation of sea surface current field from sequential satellite images of the East China Sea

A series of NOAA AVHRR data over the East China Sea were collected from the ground station of the Second Institute of Oceanography, Hangzhou, China. Three methods, including a functional analytic method (FAM), a maximum cross correlation (MCC)'method and a correlation relaxation (C - R) method, are applied to derive the sea surface current field from sequential satellite images in the area of the East China Sea. Several preprocessing steps, such as geometric correction, SST determination, image projection, image navigation and grey value normalization as well as land and cloud mask are performed. The results from the three methods reflect the general current system in this area reasonably.

Finite Element Method Based on Equivalent Magnetic Energy Method for Computation of 2D Nonlinear Eddy Current Field

In this paper, the finite element method using vector potential in applications to 2D nonlinear eddy current field is discussed. The authors use the equivalent magnetic energy method to deal with magnetization curve of ferromagnetic material,and present the formulation of 2D nonlinear eddy current field.With this method the authors analyze the eddy current field in an induction ladle furnace and the force distribution in the charge (molten metal),and plot the corresponding curves.

Inverse problem of pulsed eddy current field of ferromagnetic plates

To determine the wall thickness, conductivity and permeability of a ferromagnetic plate, an inverse problem is established with measured values and calculated values of time-domain induced voltage in pulsed eddy current testing on the plate. From time-domain analytical expressions of the partial derivatives of induced voltage with respect to parameters,it is deduced that the partial derivatives are approximately linearly dependent. Then the constraints of these parameters are obtained by solving a partial linear differential equation. It is indicated that only the product of conductivity and wall thickness, and the product of relative permeability and wall thickness can be determined accurately through the inverse problem with time-domain induced voltage. In the practical testing, supposing the conductivity of the ferromagnetic plate under test is a fixed value, and then the relative variation of wall thickness between two testing points can be calculated via the ratio of the corresponding inversion results of the product of conductivity and wall thickness. Finally, this method for wall thickness measurement is verified by the experiment results of a carbon steel plate.

Validity and Accuracy of Eddy Current Field Analysis of Laminations by Introducing Equivalent Conductivities

对于分析叠片铁心中的涡流问题，利用各种等效电导率替代硅钢片实际电导率的匀质化方法是很有应用前景的。为了评估各种电导率模型，该文提出了铁心涡流场分析的二维解析验证方法，并分别基于引入各向异性或各向同性等效电导率的铁心连续体表述和实际叠片表述对涡流场进行了解析计算。通过比较连续体表述下所得到的平均磁通密度和涡流损耗值与相应由实际叠片表述所得到的精确解，对各种电导率模型的有效性和准确性在各种条件下进行了评估。为了进一步考察电导率模型对实际工程问题的适用性，利用有限元法进行了关于TEAM21面向工程基准问题的磁通和杂散场损耗计算。计算结果表明，由该文作者所提出的等效电导率模型优于其他模型。

Analysis on Thermal Current Field in Powertrain Cabin of Tracked Vehicles With Electric Transmission System Configuration-2

The electric transmission system congfiguration-2 is one of the main electric drives for tracked vehicles. The geometrical model for the power-train cabin is established and the preliminary design for its cooling system is implemented. The mathematic model is established for thermal current field computation, simulation and analysis in the powertrain cabin. The three-dimensional structure of the powertrain cabin is optimized. The validity of the cooling system design is proved. The foundation for optimizing the whole electric transmission system configuration is laid.

DIRECT SOLUTION BY 2-D AND 3-D FINITE ELEMENT METHOD ON FORWARD PROBLEM OF LOW FREQUENCY CURRENT FIELDS IN INHOMOGENEOUS MEDIA

The paper adopts finite element method to analyze the forward problem of low-frequency current fields in inhomogeneous media. Firstly, the direct solution of 2-D and 3-D scalar potential is given. Secondly, the technique of covering finite elements for problems with movement has been presented; namely, when the place of testing point moved, the meshing data will be produced automatically to avoid re-meshing and distortion of the mesh. Thirdly the free and prescribed potential method is used to make the finite element coefficient matrices. Then this paper provides the result of a validity test obtained by simulating the laterolog-3 logging, compared with the numerical model-matching method. Finally, the MLL response is calculated.

Fractal on Particle Movement in Storm Steady Current Field of the Permian in Xingwen World Geopark

The particle is not the continuous but fractal medium.It has a diverse scale from several to angstroms.Through different density function of the particle system,mutual influences among factors can be get;especially in the micro aspect,fractal dimension of particle radius distribution influences the system and has a significance to denote the fluidity of the particle.The influences among the particle size,spatial coordinates,density(or concentration) and time are analyzed theoretically and numerically.According to first-grade reaction diffusion model of fractal medium DLK model,the movement of the Brown particle and thermodynamics theory of mechanics can be popularized to the storm current field and gets Γ(t)-D model.

A novel hybrid FEM-BEM method for 3D eddy current field calculation using current density J

This paper introduces a novel hybrid FEM-BEM method for calculating 3D eddy cur-rent field. In the eddy current region, the eddy current density J is solved by the finite element method (FEM) which is discretized by brick finite element mesh, while in the eddy current free re-gion, the magnetic field intensity H is solved by the boundary element method (BEM) which is dis-cretized by rectangular boundary element mesh. Under the boundary conditions, an algebraic equation group is obtained that only includes J by eliminating H. This method has many advan-tages over traditional ones, such as fewer variables, more convenient coupling between the FEM and the BEM and wider application to multiply-connected regions. The calculated values of two models are in good agreement with experimental results. This shows the validity of our method.

Effects of direct current electric field on corrosion behaviour of copper, Cl- ion migration behaviour and dendrites growth under thin electrolyte layer

Effect of direct current electric field （DCEF） on corrosion behaviour of copper printed circuit board （PCB-Cu）, Cl-ion migration behaviour, dendrites growth under thin electrolyte layer was investigated using potentiodynamic polarization and scanning electron microscopy （SEM） with energy dispersive spectrometer （EDS）. Results indicate that DCEF decreases the corrosion of PCB-Cu;Cl-ions directionally migrate from the negative pole to the positive pole, and enrich on the surface of the positive pole, which causes serious localized corrosion; dendrites grow on the surface of the negative pole, and the rate and scale of dendrite growth become faster and greater with the increase of external voltage and exposure time, respectively.

3D Eddy Current and Temperature Field Analysis of Large Hydro-generators in Leading Phase Operations

As a common practice,a large hydro-generator will operate in leading phase conditions to absorb the reactive power of the power grid.However,the accurate and precise prediction of the leading phase operation capacity of a large hydro-generator has always been a formidable challenge to engineers and academicians because it is extremely hard to compute the eddy currents and losses as well as the local overheating in the pressure plate and finger.To address this problem,a full three dimensional(3D)finite element model and method of the coupled eddy current and temperature fields in the end region of a large hydro-generator are developed.The equivalent medium parameters used in the computations are comprehensively discussed.Moreover,some numerically based solution methodologies for accurate computation of the field and armature currents under different leading phase conditions are proposed.Numerical results on the coupled eddy current and temperature fields in the end regions of a 250 MW hydro-generator confirm positively the feasibility of the present work.

THE APPLICATION OF COKELET'S WAVE THEORY IN THE CALCULATION OF WAVE-CURRENT FIELD

By using Cokelet's wave theory,the limiting wave height and the relative wave angular frequency in wave-current field were calculated in this paper.It is indicated by numeri- cal calculation that if the water depth is not too small,the result given by authors'calculation are very close to the results of limiting wave height by Dalrymple(1975)and to the data of rel- ative wave angular frequency by linear wave theory;but if water depth is rather small,there are some discrepancy,

Grain refinement of pure aluminum by direct current pulsed magnetic field and inoculation

The combined effects of direct current pulsed magnetic field （DC-PMF） and inoculation on pure aluminum were investigated, the grain refinement behavior of DC-PMF and inoculation was discussed. The experimental results indicate that the solidification micro structure of pure aluminum can be greatly refined under DC-PMF. Refinement of pure aluminum is attributed to electromagnetic undercooling and forced convection caused by DC-PMF. With single DC-PMF, the grain size in the equiaxed zone is uneven. However, under DC-PMF, by adding 0.05% （mass fraction） Al5Ti-B, the grain size of the sample is smaller, and the size distribution is more uniform than that of single DC-PMF. Furthermore, under the combination of DC-PMF and inoculation, with the increase of output current, the grain size is further reduced. When the output current increases to 100 A, the average grain size can decrease to 113 μn.

Single Bubble Behavior in Direct Current Electric Field

The investigation on bubble behavior in electric field helps to analyze the mechanism of electric enhancement of boiling heat transfer. Experiments were performed to investigate the bubble deformation in direct current （DC） electric field with bubbles attached to the orifice. The air bubbles were slowly generated in the transformer oil pool at different orifices, so that the effect of flow on bubble shape was eliminated. The results showed that the bubbles were elongated and the departure volume decreased when the electric field was intensified. The major and minor axes, aspect ratio and departure volume increased with increasing the orifice diameter. Both the electric field and orifice size have great influence on bubble behavior. The bubble deformation was also simulated to compare with the experimental results. The numerical and experimental data qualitatively agree with each other.