Design Curves for Mooring Lines of Turret Mooring Systems

This paper presents a series of design curves to aid in the selection of turret mooring systems for tankers based Floating Production Storage and Offloading (FPSO) systems. These curves are appropriate to water depths ranging from 100 m to 600 m. The curves can be used as a preliminary design tool, allowing the designer to quickly evaluate alternative mooring system configurations, including the number of mooring lines, the characteristics of chain and wire rope to be deployed and the. initial tension. With a knowledge of the total environmental force and vessel motion characteristics, the designer can determine the appropriate system for closer evaluation.

Force Analysis and Curve Design for Laying Pipe in Loop Laying Head of Wire Rod Mills

Laying head is a high-precision engineering device in hot-rolled high speed wire rod production line. Previously research works are focused on the laying pipe wear-resisting. Laying pipe curve design method based on wire rod kinematics and dynamics analyses are not reported before. In order to design and manufacture the laying pipe, the motion and force process of the wire rod in the laying pipe should be studied. In this paper, a novel approach is proposed to investigate the force modeling for hot-rolled wire rod in laying pipe. An idea of limited element method is used to analysis and calculates the forces between laying pipe inner surface and wire rod. The design requirements of laying pipe curve for manufacturing are discussed. The kinematics and dynamics modeling for numerical calculation are built. A laying pipe curve equation is proposed by discussing design boundary conditions. Numerical results with di erent laying pipe curves design parameters are plotted and compared. The proposed approach performs good result which can be applied for laying pipe curve design and analysis for engineering application.

FAIRING TECHNIQUE OF THE CURVES AND SURFACES IN INDUSTRIAL STYLING DESIGN

To many industrial products such as cell phone, family appliance, vehicle, a pretty shape of nice visual effect is indispensable. To fulfill this target, designers are endeavoring to make the curve and surface of the products smooth and continuous during the shape design. Through the analysis and generalization of the present smoothing methods, the energy optimization method which combines the merits of energy method and least squares method together is studied, the target function of energy optimization method is derived, the solution to the target function and steps of curve fairing is introduced, the skills and methods building A-class surface which are based on cloud data measured from 3D scanning are studied, the validity of energy optimization method is verified with the example of the shape design ofa mini-EV as well.

An optimization method for rational Bézier curve design

Adjusting weights as a shape control tool in rational B6zier curve design is not easy because the weights have a global in- fluence. The curve could not approximate control polygon satisfactorily by an interactive manner. In order to produce a curve close enough to control polygon at every control vertex, an optimization model is established to minimize the distance between rational B6zier curve and its control points. This optimization problem is converted to a quadratic programming problem by separating and recombining the objective function. The new combined multi-objective optimization problem is reasonable and easy to solve. With an optimal parameter, the computing process is discussed. Comparative examples show that the designed curve is closer to control polygon and preserves the shape of the control polygon well.

Structural optimum design of bistable cylindrical shell for broadband energy harvesting application

The shallow cylindrical structure is suitable to develop broadband vibration energy harvesters due to the property of the inherent mechanical bistability. In this letter, the optimum design of the bistable cylindrical shell for broadband energy harvesting application is investigated from the structural point of view. The output power is evaluated by the concept of the harvestable power, which balances the frequency of snap through and the referred output energy associated with each snap through. The non- dimensional harvestable power is analytically expressed as the function of the non-dimensional curvature parameter and one constructed parameter. The universal dependence of the optimal curvature parameter and the associated optimal harvestable power on the constructed parameter is derived, which can be well aooroximated by the linear relation in double logarithmic coordinate.

Shape Control and Modification of Rational Bezier Curve and Surface

A Bezier interpolation approach is proposed which uses local generation of endpoint slopes and forces the curve and the surface to pass through an arbitrarily specified point to control and modify the shape of curve and surface, making the result satisfactory.

ANALYSIS AND PREDICTION OF INTERFERENCE IN ASSEMBLING CURVED BEVEL GEARS

The phenomena of interference in the course of assembling curved bevel gears are ana. lysed and the corresponding prediction program of interference is established taking KlingInberg bevel gear as an exmple. The factors influencing interferenee are discussed and the coneept ofcritical cutter radius is proposed. Finally, a simplified approximate function between the critical cutter ra- dius and the other factors is derived,and the designing method of avoiding interferenee is provided. The analysis and caiculation are proved to consistent with a case of actual product.

Development of realistic design fire time-temperature ：urves for the testing of cold-formed steel wall systems

Fire resistance rating of light gauge steel frame （LSF） wall systems is obtained from fire tests based on the standard fire time-temperature curve. However, fire severity has increased in modem buildings due to higher fuel loads as a result of modern furniture and light weight constructions that make use of thermoplastics materials, synthetic foams and fabrics. Some of these materials are high in calorific values and increase both the spread of fire growth and heat release rate, thus increasing the fire severity beyond that of the standard fire curve. Further, the standard fire curve does not include a decay phase that is present in natural fires. Despite the increasing usage of LSF walls, their behavior in real building fires is not fully understood. This paper presents the details of a research study aimed at developing realistic design fire curves for use in the fire tests of LSF walls. It includes a review of the characteristics of building fires, previously developed fire time-temperature curves, computer models and available parametric equations. The paper highlights that real building fire time-temperature curves depend on the fuel load representing the combustible building contents, ventilation openings and thermal properties of wall lining materials, and provides suitable values of many required parameters including fuel loads in residential buildings. Finally, realistic design fire time-temperature curves simulating the fire conditions in modem residential buildings are proposed for the testing of LSF walls.

A Skeleton-Based Approach of Automatically Generating Some Chinese Typefaces

This paper introduces a skeleton-based approach of automatically gener-ating DENG-XIAN, YUAN-TOU and HU-PO typefaces and discusses somealgorithms used in generating these fonts.