IN-SITU TIME-RESOLVED RAMAN SPECTROSCOPIC STUDIES OF SILVER ELECTRODE IN NaSCN SOLUTION

In-situ time-resolved Raman spectroscopy(TRRS)has been applied on studies of electrochemical adsorption of thiocyanate at silver electrode during potential cycles and potential step.It is shown that some dynamic information about the adsorption and desorption processes can be obtained.

CATALYTIC REDUCTION OF HEMOGLOBIN AT PHENOTHIAZINE COATED SILVER ELECTRODE

Phenothiazine-coated silver electrode prepared by a simple reaction of phenothiazine with the metal is very stable and can make the reduction of hemoglobin possible.

Bifunctional flexible electrochromic energy storage devices based on silver nanowire flexible transparent electrodes

Flexible electrochromic energy storage devices(FECESDs)for powering flexible electronics have attracted considerable attention.Silver nanowires(AgNWs)are one kind of the most promising flexible transparent electrodes(FTEs)materials for the emerging flexible devices.Currently,fabricating FECESD based on AgNWs FTEs is still hindered by their intrinsic poor electrochemical stability.To address this issue,a hybrid AgNWs/Co(OH)_(2)/PEDOT:PSS electrode is proposed.The PEDOT:PSS could not only improve the resistance against electrochemical corrosion of AgNWs,but also work as functional layer to realize the color-changing and energy storage properties.Moreover,the Co(OH)_(2)interlayer further improved the color-changing and energy storage performance.Based on the improvement,we assembled the symmetrical FECESDs.Under the same condition,the areal capacitance(0.8 mF cm^(−2))and coloration efficiency(269.80 cm^(2)C−1)of AgNWs/Co(OH)_(2)/PEDOT:PSS FECESDs were obviously higher than AgNWs/PEDOT:PSS FECESDs.Furthermore,the obtained FECESDs exhibited excellent stability against the mechanical deformation.The areal capacitance remained stable during 1000 times cyclic bending with a 25 mm curvature radius.These results demonstrated the broad application potential of the AgNWs/Co(OH)_(2)/PEDOT:PSS FECESD for the emerging portable and multifunctional electronics.

Flexible carbon nanotube-enriched silver electrode films with high electrical conductivity and reliability prepared by facile screen printing

Flexible electrode films play critical and fundamental roles in the successful development of flexible electronic devices. In this study, carbon nanotubes（CNTs） were implanted into silver（Ag） ink to enhance the electrical conductivity and the reliability of the printed Ag electrode films. The fabricated carbon nanotubes-enriched silver（Ag-CNTs） electrode films were printed on the polyimide substrates by a facile screen printing method and sintered at a relatively low temperature. The resistivity of Ag-CNTs films was decreased by 62.27% compared with the pure Ag film. Additionally, the Ag-CNTs films exhibited excellent flexibility under a bending radius of 4 mm（strain ε = 2.09%） over 1000 cycles. Furthermore, the Ag-CNTs film displayed unchangeable electrical conductivity together with a strong adhesion after an accelerated aging test with 500 thermal shock cycles. These improvements were attributed to the AgCNTs interconnected network structure, which can provide electronic transmission channels and prevent cracks from initiating and propagating.

Ionic Liquid-Enhanced Assembly of Nanomaterials for Highly Stable Flexible Transparent Electrodes

The controlled assembly of nanomaterials has demon-strated significant potential in advancing technological devices.However,achieving highly efficient and low-loss assembly technique for nanomate-rials,enabling the creation of hierarchical structures with distinctive func-tionalities,remains a formidable challenge.Here,we present a method for nanomaterial assembly enhanced by ionic liquids,which enables the fabrication of highly stable,flexible,and transparent electrodes featuring an organized layered structure.The utilization of hydrophobic and non-volatile ionic liquids facilitates the production of stable interfaces with water,effectively preventing the sedimentation of 1D/2D nanomaterials assembled at the interface.Furthermore,the interfacially assembled nanomaterial monolayer exhibits an alternate self-climbing behavior,enabling layer-by-layer transfer and the formation of a well-ordered MXene-wrapped silver nanowire network film.The resulting composite film not only demonstrates exceptional photoelectric performance with a sheet resistance of 9.4Ωsq^(-1) and 93%transmittance,but also showcases remarkable environmental stability and mechanical flexibility.Particularly noteworthy is its application in transparent electromagnetic interference shielding materials and triboelectric nanogenerator devices.This research introduces an innovative approach to manufacture and tailor functional devices based on ordered nanomaterials.

Curative effect of hydrogen peroxide combined with silver ion disinfection on pelvic floor dysfunction

BACKGROUND Pelvic floor dysfunction(PFD)is related to muscle fiber tearing during childbirth,negatively impacting postpartum quality of life of parturient.Appropriate and effective intervention is necessary to promote PFD recovery.AIM To analyze the use of hydrogen peroxide and silver ion disinfection for vaginal electrodes in conjunction with comprehensive rehabilitation therapy for postpartum women with PFD.METHODS A total of 59 women with PFD who were admitted to the hospital from May 2019 to July 2022 were divided into two groups:Control group(n=27)received comprehensive rehabilitation therapy and observation group(n=32)received intervention with pelvic floor biostimulation feedback instrument in addition to comprehensive rehabilitation therapy.The vaginal electrodes were disinfected with hydrogen peroxide and silver ion before treatment.Intervention for both groups was started 6 weeks postpartum,and rehabilitation lasted for 3 months.Pelvic floor muscle voltage,pelvic floor muscle strength,vaginal muscle voltage,vaginal muscle tone,pelvic floor function,quality of life,and incidence of postpartum PFD were compared between the two groups.RESULTS Before comprehensive rehabilitation treatment,basic data and pelvic floor function were not significantly different between the two groups.After treatment,the observation group showed significant improvements in the maximum voltage and average voltage of pelvic floor muscles,contraction time of type I and type II fibers,pelvic floor muscle strength,vaginal muscle tone,vaginal muscle voltage,and quality of life(GQOLI-74 reports),compared with the control group.The observation group had lower scores on the pelvic floor distress inventory(PFDI-20)and a lower incidence of postpartum PFD,indicating the effectiveness of the pelvic floor biostimulation feedback instrument in promoting the recovery of maternal pelvic floor function.CONCLUSION The combination of the pelvic floor biostimulation feedback instrument and comprehensive rehabilitation nursing can improve pelvic floor muscle strength,promote the recovery of vaginal muscle tone,and improve pelvic floor function and quality of life.The use of hydrogen peroxide and silver ion disinfectant demonstrated favorable antibacterial efficacy and is worthy of clinical application.

Silver Nanowire Electrodes: Conductivity Improvement Without Post-treatment and Application in Capacitive Pressure Sensors

Transparent electrode based on silver nanowires(Ag NWs) emerges as an outstanding alternative of indium tin oxide film especially for flexible electronics. However, the conductivity of Ag NWs transparent electrode is still dramatically limited by the contact resistance between nanowires at high transmittance. Polyvinylpyrrolidone(PVP) layer adsorbed on the nanowire surface acts as an electrically insulating barrier at wire–wire junctions, and some devastating post-treatment methods are proposed to reduce or eliminate PVP layer, which usually limit the application of the substrates susceptible to heat or pressure and burden the fabrication with high-cost, time-consuming, or inefficient processes. In this work, a simple and rapid pre-treatment washing method was proposed to reduce the thickness of PVP layer from 13.19 to0.96 nm and improve the contact between wires. Ag NW electrodes with sheet resistances of 15.6 and 204 X sq-1have been achieved at transmittances of 90 and 97.5 %, respectively. This method avoided any post-treatments and popularized the application of high-performance Ag NW transparent electrode on more substrates. The improved Ag NWs were successfully employed in a capacitive pressure sensor with high transparency, sensitivity, and reproducibility.

A comparative study of four 20-membered N_2S_4-crown ethers as ionophores for polymeric membrane silver selective electrodes

Four 20-membered N_2S_4-monoazathiacrown ethers have been synthesized and explored as neutral ionophores for Ag^+-selective electrodes.Potentiometric responses reveal that the flexibility of the ligands has great effect on the selectivity and sensitivity to Ag^+ ions.The electrode based on ionophore 9,10,20,25-tetrahydro-5H,12H-tribenzo[b,n,r][1,7,10,16,4,13]tetrathiadiaza cycloicosine 6,13-(7H,14H)-dione(C) with 2-nitrophenyl octyl ether(o-NPOE) as solvent in a poly(vinyl chloride)(PVC) membrane matrix sho...

Time development of surface enhanced Raman intensities of the adsorbed pyrazine molecules on the silver electrode as the applied voltage varies

In this work,the time development of surface enhanced Raman intensities of the vibrational modes involving the ring skeleton and the C—H motions of the pyrazine molecule as the applied voltage on the silver electrode is shifted between -0.2 V and -0.5 V (vs.saturated calomel electrode)is reported.The observation shows that there are two processes of enhancement involved during this shift of applied voltage.One is vibrational mode dependent while the other is not.The detailed behavior of these two processes of enhancement is discussed along with the retarded response of the Helmholtz double layer structure to the change of the applied voltage on the electrode.

Application of silver electrode to the electrochemical studies of hemoglobin

Several aspects of the application of silver electrode to the electrochemical studies of hemoglobin have been discussed in this paper. The silver electrode could not only be used directly as the electrode for the electrochemical studies of hemoglobin, but also react with phenothiazine and benzimidazole to give stable and useful mediator-coated electrodes. In addition, the silver electrode could help sodium dodecyl sulfate to give full play to its promoting effect on the protein.

Investigations of Thallium(Ⅰ) Underpotential Deposition on the Silver Rotating Disk Electrode and Its Analytical Application

The cyclic voltammetry(CV) and the square wave technique were used for the investigations of thallium(Ⅰ) underpotential deposition(UPD) on the silver electrode. A solution of 10 \{mmol/L\} HClO 4+10 mmol/L NaCl was selected as the supporting electrolyte. The calibration plots for Tl(Ⅰ) concentration in the range of 2×10 -9 -1×10 -7 mol/L were obtained. The detection limit was 5×10 -10 mol/L. For the solutions of 4 0×10 -9 mol/L thallium added before the urine sample pretreatment procedure, the average recovery was 105 6% with a relative standard deviation(RSD) of 15 5%.

The Investigation of Oscillographic Chronopotentiometry at Silver Disk Electrode and Its Mechanism

A new method of oscillographic chronopotentiometry at silver disk electrode was investigated. By using it, a series of ions such as Pb, In, Cr, Tl, Bi etc. were determined. The detection limits are two or three orders of magnitude lower than those by oscillographic chronopotentiometry at mercury electrode. The proposed method is characterized by fine sensitivity, stable oscillogram and no mercury. The research on the mechanism of this method shows that these achievements are caused by the characterristics of silver electroxidation and electroreduction and the oscillographic chronopotentiometry (OC).

DETERMINATION OF SERUM ALBUMIN USING A SILVER ION SELECTIVE ELECTRODE

In this paper is reported a new method of determining serum albumin with potentiometry. The silver ion selective electrode was used as working electrode and S. C. E as reference electrode. By controlling the ionic strength, PH and temperature constant, a good linear relationship was obtained between the cell potential and albumin concentration. This method .possessed characters-of operating simplicity, rapidity and directness. The samples could be detected directly and the results were in accordance with the values detected by classic K method.

Voltammetric Behavior of Tembotrione Using Silver/Amalgam Electrode

Tembotrione is herbicide which belongs to the triketone group of herbicides. It’s registered as a selective, post-emergence herbicide developed for the control of a broad spectrum broadleaf and grassy weeds in corn. There is little information about tembotrione because of his short presence in the market. Due to its ever wider application, it is important to know the details of its chemical characteristics and redox processes, including biogeochemical transformation and migration after application to agricultural land, which could contribute to its efficient and safer application. In this paper we examined voltammetric behavior of tembotrione using Silver/Amalgam (Ag/Hg) electrode. For the investigation of electrochemical behavior we used the cyclic voltammetry technique, with conventional three-electrode cell and electrochemical workstation. During the experiment pH values of solution varieties while constant concentration of tembotrione was maintained. Cyclic voltammograms were recorded at pH values 6, 8, 10 and 12, at which tembotrione was electrochemically active. At this pH values two signals were observed. Optimum pH value, at which the current intensity was greatest, was 12. Obtained results provide relevant information on the electrochemical behavior of tembotrione, which can serve as a basis for the development of electrochemical techniques for the removal and degradation of this pesticide in the environment.

Hot electron electrochemistry at silver activated by femtosecond laser pulses

A silver microelectrode with a diameter of 30μm in an aqueous K_(2)SO_(4) electrolyte was irradiated with 55 fs and 213 fs laser pulses.This caused the emission of electrons which transiently charged the electrochemical double layer.The two applied pulse durations were significantly shorter than the electron-phonon relaxation time.The laser pulse durations had negligible impact on the emitted charge,which is incompatible with multiphoton emission.On the other hand,the ob-served dependence of emitted charge on laser fluence and electrode potential supports the thermionic emission mechanism.

Highly Conductive Fractal-structured Silver Particles for Preparing Flexible Printed Circuits via Screen Printing

Fractal-structured silver particles(FSSPs)are conductive materials with a micron-scale trunk and nanoscale branches,and are characterized with high electrical conductivity and high connectivity.In this study,FSSPs were added to an aqueous additive solution for synthesizing a conductive ink,which was used to prepare two types of printing electrodes via screen printing.The first type included two flexible printed electrodes(FPEs):an FPE on a polyethylene terephthalate(PET)film and an FPE on paper.The second one was a polydimethylsiloxane(PDMS)-embedded FPE.The PETbased FPE exhibited high electrochemical stability when its sheet resistance was 0.38Ω/sq for a 50%(w/w)content of FSSPs in the prepared conductive ink.Moreover,the embedded FPE demonstrated excellent mechanical properties and high chemical stability.In addition,the embedded structure was endowed with stretchability,which is important for different devices,such as flexible biomedical sensors and flexible electronics.

A Novel Method of the Preparation ofChemically Modified Electrodes

ＡＮｏｖｅｌＭｅｔｈｏｄｏｆｔｈｅＰｒｅｐａｒａｔｉｏｎｏｆＣｈｅｍｉｃａｌｌｙＭｏｄｉｆｉｅｄＥｌｅｃｔｒｏｄｅｓＬＩＧｅｎ－ｘｉ，ＬＩＡＯＸｉａｎｇ－ｍｉｎ，ＦＡＮＧＨｕｉ－ｑｕｎａｎｄＣＨＥＮＨｏｎｇ－ｙｕａｎ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍ...

Surface charging activated mechanism change: A computational study of O, CO, and CO2 interactions on Ag electrodes

Electrocatalytic and plasma-activated processes receive increasing attention in catalysis. Density functional theory(DFT) calculations are state-of-the-art tools for the fundamental study of reaction mechanisms and predicting the performance of catalytic materials. Proper application of DFT-based methods is crucial when investigating charge-doped electrode surfaces during electrocatalytic and plasma-activated reactions. Here, as a model electrode for plasma-activated CO2 splitting, we studied the interactions of O, CO, and CO2 with the neutral and progressively charged Ag(111) metal surfaces. We show that the application of correction procedures is necessary to obtain accurate adsorption energy profiles of O atoms,CO and CO2 molecules on Ag surfaces that are under the influence of additional electrons. Interestingly,the oxidation of CO is found to shift from a Langmuir–Hinshelwood mechanism on a neutral electrode to an Eley–Rideal mechanism on charged electrodes. Furthermore, we show that the surface charging of Ag(111) electrodes increase their CO2 reduction performance by enhancing the adsorption of O atoms and desorption of CO molecules. A further increase in the absolute charge-state of the electrode surface is expected to waive the thermodynamic barriers for the CO2 splitting reaction.

Trace Level Gas Sensing Characteristics of Nano-Crystalline Silver Decamolybdate

A soft-chemical method has been developed for the synthesis of nano-crystalline powders of silver decamolybdate. Gas sensing characteristics of this composition both in porous pellet and thin film configurations were investigated. The compound Ag6Mo10O33 was found to sense selectively ammonia at 503 K. Above 503 K it has significant cross sensitivity to petroleum gas (PG). Spin coated thin films exhibited selective sensing towards PG.

石墨烯/纳米银对Ag/AgCl海洋电场探测电极的改性机制研究

针对不同含量石墨烯/纳米银改性的Ag/AgCl电极分别进行交流阻抗、扫描电镜、吸水率和电位稳定性测试。实验结果表明:随着石墨烯/纳米银含量的增加,改性Ag/AgCl电极的界面结构参数弥散系数C_(dl)-P增大,电容值C_(dl)-T减小,动力学特征参数电荷转移电阻R_(ct)先减小后增大。基于交流阻抗测试得到的电极动力学特征信息及界面结构信息与电极的扫描电镜、吸水率以及电位稳定性测试结果基本吻合。石墨烯/纳米银对Ag/AgCl电极的改性主要体现在提高电极的表面均匀性和导电性,但是降低了电极的孔隙率,这3个方面影响的协同作用反映了石墨烯/纳米银对Ag/AgCl电极改性的内在机制。