CC@BCN@PANI core-shell nanoarrays as ultra-high cycle stability cathode for Zn-ion hybrid supercapacitors

Exploring cathode materials that combine excellent cycling stability and high energy density poses a challenge to aqueous Zn-ion hybrid supercapacitors(ZHSCs).Herein,polyaniline(PANI)coated boron-carbon-nitrogen(BCN)nanoarray on carbon cloth surface is prepared as advanced cathode materials via simple high-temperature calcination and electrochemical deposition methods.Because of the excellent specific capacity and conductivity of PANI,the CC@BCN@PANI core-shell nanoarrays cathode shows an excellent ion storage capability.Moreover,the 3D nanoarray structure can provide enough space for the volume expansion and contraction of PANI in the charging/discharging cycles,which effectively avoids the collapse of the microstructure and greatly improves the electrochemical stability of PANI.Therefore,the CC@BCN@PANI-based ZHSCs exhibit superior electrochemical performances showing a specific capacity of 145.8 mAh/g,a high energy density of 116.78 Wh/kg,an excellent power density of 12 kW/kg,and a capacity retention rate of 86.2%after 8000 charge/discharge cycles at a current density of 2 A/g.In addition,the flexible ZHSCs(FZHSCs)also show a capacity retention rate of 87.7%at the current density of 2 A/g after 450 cycles.

Durable K-ion batteries with 100%capacity retention up to 40,000 cycles

Currently,the major challenge in terms of research on K-ion batteries is to ensure that they possess satisfactory cycle stability and specific capacity,especially in terms of the intrinsically sluggish kinetics induced by the large radius of K+ions.Here,we explore high-performance K-ion half/full batteries with high rate capability,high specific capacity,and extremely durable cycle stability based on carbon nanosheets with tailored N dopants,which can alleviate the change of volume,increase electronic conductivity,and enhance the K+ion adsorption.The as-assembled K-ion half-batteries show an excellent rate capability of 468 mA h g^(−1) at 100 mA g^(−1),which is superior to those of most carbon materials reported to date.Moreover,the as-assembled half-cells have an outstanding life span,running 40,000 cycles over 8 months with a specific capacity retention of 100%at a high current density of 2000 mA g^(−1),and the target full cells deliver a high reversible specific capacity of 146 mA h g^(−1) after 2000 cycles over 2 months,with a specific capacity retention of 113%at a high current density of 500 mA g^(−1),both of which are state of the art in the field of K-ion batteries.This study might provide some insights into and potential avenues for exploration of advanced K-ion batteries with durable stability for practical applications.

Enhanced High-Temperature Cycling Stability of Garnet-Based All Solid-State Lithium Battery Using a Multi-Functional Catholyte Buffer Layer

The pursuit of safer and high-performance lithium-ion batteries(LIBs)has triggered extensive research activities on solid-state batteries,while challenges related to the unstable electrode-electrolyte interface hinder their practical implementation.Polymer has been used extensively to improve the cathode-electrolyte interface in garnet-based all-solid-state LIBs(ASSLBs),while it introduces new concerns about thermal stability.In this study,we propose the incorporation of a multi-functional flame-retardant triphenyl phos-phate additive into poly(ethylene oxide),acting as a thin buffer layer between LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)cathode and garnet electro-lyte.Through electrochemical stability tests,cycling performance evaluations,interfacial thermal stability analysis and flammability tests,improved thermal stability(capacity retention of 98.5%after 100 cycles at 60℃,and 89.6%after 50 cycles at 80℃)and safety characteristics(safe and stable cycling up to 100℃)are demonstrated.Based on various materials characterizations,the mechanism for the improved thermal stability of the interface is proposed.The results highlight the potential of multi-functional flame-retardant additives to address the challenges associated with the electrode-electrolyte interface in ASSLBs at high temperature.Efficient thermal modification in ASSLBs operating at elevated temperatures is also essential for enabling large-scale energy storage with safety being the primary concern.

Graphene quantum dots as sulfiphilic and lithiophilic mediator toward high stability and durable life lithium-sulfur batteries

The development of lithium-sulfur(Li-S) battery as one of the most attractive energy storage systems among lithium metal batteries is seriously hindered by low sulfur utilization, poor cycle stability and uneven redeposition of Li anode. It is necessary to propose strategies to address the problems as well as improve the electrochemical performance. One of the effective solutions is to improve the sulfiphilicity of sulfur cathode and the lithiophilicity of the Li anode. Herein, we reported that a synergistic functional separator(graphene quantum dots(GQDs)-polyacrylonitrile(PAN) @polypropylene(PP) separator)improved the electrochemical activity of sulfur cathode as well as the stability of Li anode. GQDs induced uniform Li^(+)nucleation and deposition, which slowed down the passivation of Li anode and avoided shortcircuit. Further, three-dimensional network constructed by electrospinning nanofibers and the polar functional groups of GQDs could both effectively inhibit the shuttle of LiPSs and improve the sulfur utilization. The stability of Li-S battery was improved by the synergistic effect. In addition, GQDs and electrospinning nanofibers protector increased lifetime of separators. Benefiting from the unique design strategy, Li//Li symmetric battery with GQDs-PAN@PP separators exhibited stably cycling for over 600 h. More importantly, the Li-S full batteries based GQDs-PAN@PP separators enabled high stability and desirable sulfur electrochemistry, including high reversibility of 558.09 mA h g^(-1)for 200 cycles and durable life with a low fading rate of 0.075% per cycle after 500 cycles at 0.5 C. Moreover, an impressive areal capacity of 3.23 mA h cm^(-2)was maintained under high sulfur loading of 5.10 mg cm^(-2). This work provides a new insight for modification separator to improve the electrochemical performance of Li-S/Li metal batteries.

Interconnected and high cycling stability polypyrrole supercapacitors using cellulose nanocrystals and commonly used inorganic salts as dopants

Polypyrrole(PPy)is wildly used as electrode material in supercapacitors due to its high conductivity,low cost,ease of handling,and ease of fabrication.However,limited capacitance and poor cycling stability hinder its practical application.After developing carboxylated cellulose nanocrystals(CNC-COO^(-))as immobile dopants for PPy to improve its cycling stability,we investigated the effect of different commonly used salts(KCl,NaCl,KBr,and NaClO_(4))as dopants during electrode fabrication by electropolymerization.The film’s capacitance increased from 160.6 to 183.4 F g^(-1)after adding a combination of KCl and NaClO_(4) into the electrodeposition electrolyte.More importantly,the porous and interconnected PPy/CNC-COO^(-)-Cl-(Cl O_(4)^(-))_0.5 electrode film exhibited an excellent capacitance of 125.0 F g^(-1)(0.78 F cm^(-2))at a high current density of 2.0 Ag^(-1)(20 m A cm^(-2),allowing charging in less than 1 min),increasing almost 204%over PPy/CNC-COO-films.A symmetric PPy/CNC-COO^(-)-Cl-(ClO_(4)^(-))_0.5 supercapacitor retained its full capacitance after 5000 cycles,and displayed a high energy density of 5.2 Wh kg^(-1)at a power density of 25.4 W kg^(-1)(34.5μWh cm^(-2) at 1752.3μW cm^(-2)).These results reveal that the porous structure formed by doping with CNC-COO-and inorganic salts opens up more active reaction areas to store charges in PPy-based films as the stiff and ribbon-like CNC-COO-as permanent dopants improve the strength and stability of PPy-based films.Our demonstration provides a simple and practical way to deposit PPy based supercapacitors with high capacitance,fast charging,and excellent cycling stability.

Improving Cyclic Stability and Rate Performance of Lithium Ion Batteries Using La^(3+)Modified LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)Cathode Materials

La_(4)NiLiO_(8)-coated NCM622 samples were prepared through a sol-gel method,and the electrochemical performance as cathode materials was investigated.It is revealed that part of the introduced La^(3+)ions produce a coating layer on the surface of NCM622 particles,while the rest occupy the 3b position of the lattice.The optimized sample exhibits a capacity retention of 96.54%after 100 cycles under 1C rate with a discharge specific capacity of 117.54 mAh·g^(-1)under 5C rate,much higher than those of the unmodified sample.The results show that the addition of La^(3+)ion can greatly improve the cyclic stability and the rate performance of NCM622.

In Situ Formation of LiF-Rich Carbon Interphase on Silicon Particles for Cycle-Stable Battery Anodes

Silicon(Si)is a potential high-capacity anode material for the next-generation lithium-ion battery with high energy density.However,Si anodes suff er from severe interfacial chemistry issues,such as side reactions at the electrode/electrolyte interface,leading to poor electrochemical cycling stability.Herein,we demonstrate the fabrication of a conformal fl uorine-containing carbon(FC)layer on Si particles(Si-FC)and its in situ electrochemical conversion into a LiF-rich carbon layer above 1.5 V(vs.Li^(+)/Li).The as-formed LiF-rich carbon layer not only isolates the active Si and electrolytes,leading to the suppression of side reactions,but also induces the formation of a robust solid-electrolyte interface(SEI),leading to the stable interfacial chemistry of as-designed Si-FC particles.The Si-FC electrode has a high initial Coulombic effi ciency(CE)of 84.8%and a high reversible capacity of 1450 mAh/g at 0.4 C(1000 mA/g)for 300 cycles.In addition,a hybrid electrode consisting of 85 wt%graphite and 15 wt%Si-FC,and mass 2.3 mg/cm^(2) loading delivers a high areal capacity of 2.0 mAh/cm^(2) and a high-capacity retention of 93.2%after 100 cycles,showing the prospects for practical use.

Effects of Al and Co doping on the structural stability and high temperature cycling performance of LiNi_(0.5)Mn_(1.5)O_(4) spinel cathode materials

The poor structural stability and capacity retention of the high-voltage spinel-type LiNi_(0.5)Mn_(1.5)O_(4)(LNMO)limits their further application.Herein,Al and Co were doped in LNMO materials for a more stable structure and capacity.The LNMO,LiNi_(0.45)Al_(0.05)Mn_(1.5)O_(4)(LNAMO)and LiNi_(0.45)Co_(0.05)Mn_(1.5)O_(4)(LNCMO)were synthesized by calcination at 900℃ for 8 h,which was called as solid-phase method and applied universally in industry.XRD,FT-IR and CV test results showed the synthesized samples have cation disordering Fd-3m space group structures.Moreover,the incorporation of Al and Co increased the cation disordering of LNMO,thereby increasing the transfer rate of Li+.The SEM results showed that the doped samples performed more regular and ortho-octahedral.The EDS elemental analysis confirmed the uniform distribution of each metal element in the samples.Moreover,the doped samples showed better electrochemical properties than undoped LNMO.The LNAMO and LNCMO samples were discharged with specific capacities of 116.3 mA·h·g^(-1)and 122.8 mA·h·g^(-1)at 1 C charge/discharge rate with good capacity retention of 95.8% and 94.8% after 200 cycles at room temperature,respectively.The capacity fading phenomenon of the doped samples at 50℃ and 1 C rate was significantly improved.Further,cations doping also enhanced the rate performance,especially for the LNCMO,the discharge specific capacity of 117.9 mA·h·g^(-1)can be obtained at a rate of 5 C.

Advances in sodium-ion batteries at low-temperature: Challenges and strategies

With the continuing boost in the demand for energy storage,there is an increasing requirement for batteries to be capable of operation in extreme environmental conditions.Sodium-ion batteries(SIBs) have emerged as a highly promising energy storage solution due to their promising performance over a wide range of temperatures and the abundance of sodium resources in the earth's crust.Compared to lithiumion batteries(LIBs),although sodium ions possess a larger ionic radius,they are more easily desolvated than lithium ions.Fu rthermore,SIBs have a smaller Stokes radius than lithium ions,resulting in improved sodium-ion mobility in the electrolyte.Nevertheless,SIBs demonstrate a significant decrease in performance at low temperatures(LT),which constrains their operation in harsh weather conditions.Despite the increasing interest in SIBs,there is a notable scarcity of research focusing specifically on their mechanism under LT conditions.This review explores recent research that considers the thermal tolerance of SIBs from an inner chemistry process perspective,spanning a wide temperature spectrum(-70 to100℃),particularly at LT conditions.In addition,the enhancement of electrochemical performance in LT SIBs is based on improvements in reaction kinetics and cycling stability achieved through the utilization of effective electrode materials and electrolyte components.Furthermore,the safety concerns associated with SIBs are addressed and effective strategies are proposed for mitigating these issues.Finally,prospects conducted to extend the environmental frontiers of commercial SIBs are discussed mainly from three viewpoints including innovations in materials,development and research of relevant theoretical mechanisms,and intelligent safety management system establishment for larger-scale energy storage SIBs.

B-doped and La_(4)NiLiO_(8)-coated Ni-rich cathode with enhanced structural and interfacial stability for lithium-ion batteries

Ni-rich layered oxides are considered promising cathodes for advanced lithium-ion batteries(LIBs)in the future,owing to their high capacity and low cost.However,the issues on structural and interfacial stability of Ni-rich cathodes still pose substantial obstacles in the practical application of advanced LIBs.Here,we employ a one-step method to synthesize a B-doped and La_(4)NiLiO_(8)-coated LiNi_(0.82)5Co_(0.115)Mn_(0.06)O_(2)(BL-1)cathode with reliable structure and interface,for the first time.The La_(4)NiLiO_(8)coating layer can prevent cathodes from electrolyte assault and facilitate Li+diffusion kinetics.Moreover,B-doping can effectively restrain the pernicious H_(2)-H_(3) phase transition and adjust the orientation of primary particles to a radial alignment,which is obstructive to the arise of microcracks induced by the change of anisotropic volume.Specifically,when tested in pouch cells,the BL-1 cathode exhibits outstanding capacity retention of 93.49%after 500 cycles at 1 C.This dual-modification strategy dramatically enhances the stability of the structure and interface for Ni-rich cathode materials,consequently accelerating the commercialization process of high-energy–density LIBs.

Influence of rapid quenching on cyclic stability of La-Mg-Ni system (AB_3-type) electrode alloys

Aiming at the improvement of the cyclic stability of La-Mg-Ni system （PuNi3-type） hydrogen storage alloy, Ni in the alloy was partly substituted by Fe. The electrode alloys of La0.7Mg0.3Co0.45Ni255-xFex （x=0, 0.1, 0.2, 0.3, 0.4） were prepared by casting and rapid quenching. The influence of the quenching on cyclic stability as well as structure of the alloys was investigated in detail. The results of electrochemical measurement indicated that rapid quenching significantly improved cyclic stability. When the quenching rate rose from 0 （As-cast was defined as a quenching rate of 0 m/s） to 30 m/s, the cyclic life of Fe-free alloy （x=-0） increased from 81 to 105 cycles, and for alloy containing Fe（x=0.4）, it grew from 106 to 166 cycles at a current density of 600 mA/g. The results obtained by XRD, TEM and SEM revealed that the as-cast and quenched alloys had multiphase structures, including two major phases （La, Mg）Ni3 and LaNi5 as well as an imptLrity phase LaNi2. Rapid quenching helped the formation of an amorphous-like structure in Fe containing alloys.

Cycle Stabilities of La_(0.7)Mg_(0.3)Ni_(2.55-x)Co_(0.45)M_x (M=Fe, Cu, Al;x=0, 0.1) Electrode Alloys Prepared by Casting and Rapid Quenching

La-Mg-Ni system (PuNi3-type) hydrogen storage alloys La0.7Mg0.3Ni2.55-xCo0.45Mx (M=Fe, Cu, Al; x=0, 0.1) were prepared by casting and rapid quenching. Aiming to improve the cycle stabilities of the alloys, Ni in the alloy was partly substituted by Fe, Cu and Al. The effects of the substitution of Fe, Cu and Al for Ni and the rapid quenching on the microstructures and electrochemical properties of the alloys were investigated in detail. The results obtained by XRD, SEM and TEM indicate that the element substitution has no influence on the phase compositions of the alloys, but it changes the phase abundances of the alloys. Particularly, the substitution of Al and Cu obviously increases the amount of the LaNi2 phase. The substitution of Al and Fe leads to a great refinement of the as-quenched alloy′s grains. The substitution of Al strongly restrains the formation of the amorphous in the as-quenched alloy, but the substitution of Fe and Cu is quite helpful for the formation of an amorphous phase. The effects of the substitution of Fe, Cu and Al on the cycle stabilities of the as-cast and quenched alloys are different. The positive impact of the substitution elements on the cycle stabilities of the as-cast alloys is ranked in proper order Al>Fe>Cu, and for as-quenched alloys, the order is Fe>Al>Cu. Rapid quenching engenders an unconscious influence on the phase composition, but it markedly enhances the cycle stabilities of the alloys.

New insight on correlation between the electrochemical stability and the thermal stability of high nickel cathode materials

Cycle stability and thermal safety are critical to the commercialization of nickel-rich layered materials,yet whether there is a potential correlation between these two factors is still controversial. Herein, the relationship between the cycle stability and thermal stability of nickel-rich cathode materials have been systematically studied through five different calcination temperatures of Li[NiCoMn]O(NCM83) cathode materials. The research results confirm that the cycle stability and thermal safety of nickel-rich cathode materials do not necessarily show a positive correlation. Actually, with the calcination temperature elevated, the thermal stability of the NCM83 is enhanced, while the cycle stability is degraded. This opposite correlation is not commonly reported in previous literatures. In this work, systematical characterizations demonstrate that under the experimental conditions, the capacity retention of NCM83 is mainly determined by the Li/Ni cation disorder and H2-H3 irreversible phase transition,which is optimal at lower calcination temperature. Meanwhile, the thermal stability is mainly impacted by thermal expansion characteristics and interfacial stability of cathode material, and it is dramatically improved by the mechanical strength of the secondary particles reinforced at high calcinated temperature. This study provides some new insights on understanding and designing of the high-energy cathode materials with long cycle-life and superior safety.

Tuning the crystalline and electronic structure of ZrO_(2)via oxygen vacancies and nano-structuring for polysulfides conversion in lithium-sulfur batteries

The recent emergence of tetragonal phases zirconium dioxide(ZrO_(2))with vacancies has generated significant interest as a highly efficient and stable electrocatalyst with potential applications in trapping polysulfides and facilitating rapid conversion in lithium-sulfur batteries(LSBs).However,the reduction of ZrO_(2)is challenging,even under strong reducing atmospheres at high temperatures and pressures.Consequently,the limited presence of oxygen vacancies results in insufficient active sites and reaction interfaces,thereby hindering practical implementation.Herein,we successfully introduced abundant oxygen vacancies into ZrO_(2)at the nanoscale with the help of carbon nanotubes(CNTs-OH)through hydrogen-etching at lower temperatures and pressures.The introduced oxygen vacancies on ZrO_(2-x)/CNTs-OH can effectively rearrange charge distribution,enhance sulfiphilicity and increase active sites,contributing to high ionic and electronic transfer kinetics,strong binding energy and low redox barriers between polysulfides and ZrO_(2-x).These findings have been experimentally validated and supported by theory calculations.As a result,LSBs assembled with the ZrO_(2-x)/CNTs-OH modified separators demonstrate excellent rate performance,superior cycling stability,and ultra-high sulfur utilization.Especially,at high sulfur loading of 6 mg cm^(-2),the area capacity is still up to 6.3 mA h cm^(-2).This work provides valuable insights into the structural and functional optimization of electrocatalysts for batteries.

Influences on oxidation voltage and holding time on poly(3-methylthiophene) film for electrochromic stability

In this study, we report the influences of oxidation potential and holding time on the electrochromic(EC) stability of poly(3-methylthiophene)(P3MT) film during the electrochemical reaction. The cycle stability and transmittance changes of the film were investigated by optimizing the oxidation potential, and its chemical compositions were measured by x-ray photoelectron spectra after multiple electrochemical cycles. High oxidation potentials can increase the P3MT film color contrast and decrease its cycle stability because of accelerating chemical decomposition. Moreover, the holding time with potential pulsing was analyzed by using the optical memory of P3MT at an optimized oxidation potential, which revealed the reduced voltage duration saved energy consumption by 11.6% and improved the EC cycle stability without changing in color contrast.

Performance and Stability of Supercapacitor Modules based on Porous Carbon Electrodes in Hybrid Powertrain

Hybrid power sources have attracted much attention in the electric vehicle area. Particularly, electric-electric hybrid powertrain system consisting of supercapacitor modules and lithium-ion batteries has been widely applied because of the high power density of supercapacitors. In this study, we design a hybrid powertrain system containing two porous carbon electrode-based supercapacitor modules in parallel and one lithium ion battery pack. With the construction of the testing station, the performance and stability of the used supercapacitor modules are investigated in correlation with the structure of the supercapacitor and the nature of the electrode materials applied. It has been shown that the responding time for voltage vibration from 20 V to 48.5 V during charging or discharging process decreases from about 490 s to 94 s with the increase in applied current from 20 A to 100 A. The capacitance of the capacitor modules is nearly independent on the applied current. With the designed setup, the energy efficiency can reach as high as 0.99. The results described here provide a guidance for material selection of supercapacitors and optimized controlling strategy for hybrid power system applied in electric vehicles.

Research Progress in Improving the Cycling Stability of High-Voltage LiNi0.5Mn1.5O4 Cathode in Lithium-Ion Battery

High-voltage lithium-ion batteries(HVLIBs) are considered as promising devices of energy storage for electric vehicle, hybrid electric vehicle, and other high-power equipment. HVLIBs require their own platform voltages to be higher than 4.5 V on charge. Lithium nickel manganese spinel LiNi_(0.5)Mn_(1.5)O_4(LNMO) cathode is the most promising candidate among the 5 V cathode materials for HVLIBs due to its flat plateau at 4.7 V. However, the degradation of cyclic performance is very serious when LNMO cathode operates over 4.2 V. In this review, we summarize some methods for enhancing the cycling stability of LNMO cathodes in lithium-ion batteries, including doping, cathode surface coating,electrolyte modifying, and other methods. We also discuss the advantages and disadvantages of different methods.

Lignin derived hierarchical porous carbon with extremely suppressed polyselenide shuttling for high-capacity and long-cycle-life lithium-selenium batteries

Lithium-selenium(Li-Se)batteries have attracted considerable attentions for next-generation energy storage systems owing to high volumetric capacity of 3265 m Ah cm^(-3) and excellent electronic conductivity(~10^(-5)S cm^(-1))of selenium.However,the shuttling effect and capacity fading prevent their wide applications.Herein we report a low-cost strategy for scalable fabrication of lignin derived hierarchical porous carbon(LHPC)as a new high-loading Se host for high-capacity and long-term cycling Li-Se batteries in carbonate electrolyte.The resulting LHPC exhibits three-dimensional(3D)hierarchically porous structure,high specific surface area of 1696 m^(2) g^(-1),and hetero-atom doping(O,S),which can effectively confine the Se particles into the micropores,and meanwhile,offer effective chemical binding sites for selenides from hetero-atoms(O,S).As a result,our Li-Se batteries based on Se@LHPC demonstrate high capacity of 450 m Ah g^(-1) at 0.5 C after 500 cycles,with a low capacity fading rate of only 0.027%.The theoretical simulation confirmed the strong affinity of selenides on the O and S sites of LHPC effectively mitigating the Se losing.Therefore,our strategy of using lignin as the low-cost precursor of hierarchically porous carbon for high-loading Se host offers new opportunities for high-capacity and long-life Li-Se batteries.

Rational Design of Porous N-Ti3C2 MXene@CNT Microspheres for High Cycling Stability in Li–S Battery

Herein,N-Ti3C2@CNT microspheres are successfully synthesized by the simple spray drying method.In the preparation process,HCl-treated melamine(HTM)is selected as the sources of carbon and nitrogen.It not only realizes in situ growth of CNTs on the surface of MXene nanosheets with the catalysis of Ni,but also introduces efficient N-doping in both MXene and CNTs.Within the microsphere,MXene nanosheets interconnect with CNTs to form porous and conductive network.In addition,N-doped MXene and CNTs can provide strong chemical immobilization for polysulfides and effectively entrap them within the porous microspheres.Above-mentioned merits enable N-Ti3C2@CNT microspheres to be ideal sulfur host.When used in lithium–sulfur(Li–S)battery,the N-Ti3C2@CNT microspheres/S cathode delivers initial specific capacity of 927 mAh g−1 at 1 C and retains high capacity of 775 mAh g−1 after 1000 cycles with extremely low fading rate(FR)of 0.016%per cycle.Furthermore,the cathode still shows high cycling stability at high C-rate of 4 C(capacity of 647 mAh g−1 after 650 cycles,FR 0.027%)and high sulfur loading of 3 and 6 mg cm−2 for Li–S batteries.

Electrochemical lithium ions pump for lithium recovery from brine by using a surface stability Al_(2)O_(3)–ZrO_(2 )coated LiMn_(2)O_(4) electrode

The rapid commercialization of lithium–ion batteries has caused significant expansion of the lithium demand.Electrochemical lithium ions pump is a promising technology because of its good selectivity and friendly environment.Herein,an Al_(2)O_(3)–ZrO_(2) film coating of the LiMn_(2)O_(4)(AlZr–LMO) electrode is prepared and operated for recovery of Li^(+)from brine.The Li^(+) maximum extraction capacity of AlZr–LMO reached 49.92 mg/g in one cycle.Compared with the solely LMO electrode,the AlZr–LMO demonstrated evident electrochemical stability and cycle life towards the Li^(+)recovery system.After 30 successive cycles,the extraction capacity for Li^(+)increased from 29.21%to 57.67%.The high cycle capacity of the material could be attributed to its low polarization,high active sites,and good chemical stability of the electrode surface owing to the synergy function of Al_(2)O_(3)–ZrO_(2)in the charging-discharging process.A dynamic model parameter identification method was performed to evaluate the active site of AlZr–LMO.This work may provide a way to design the AlZr–LMO electrode and develop a good method for the recovery of lithium from brine.