The interaction between DNA and the Eu(Phe) 3+ 3 complex ion has been studied by means of cyclic voltammetry and differential UV spectroscopy The results depicted an obvious decrease of peak current in CV plot...The interaction between DNA and the Eu(Phe) 3+ 3 complex ion has been studied by means of cyclic voltammetry and differential UV spectroscopy The results depicted an obvious decrease of peak current in CV plot after the reaction between the two species studied The observed peak potential separation was increased but the diffusion coefficient of Eu complex ion was decreased Hypochromicity was observed at 226 and 258 nm after the predicted interaction of them A preliminary interpretation is proposed for discussion展开更多
Nano-gold (NG) modified glassy carbon electrodes (GCEs) were used for determination of epinephrine (EP) in the presence of high concentration ascorbic acid (AA) by cyclic voltammetry (CV). This modified electrode can...Nano-gold (NG) modified glassy carbon electrodes (GCEs) were used for determination of epinephrine (EP) in the presence of high concentration ascorbic acid (AA) by cyclic voltammetry (CV). This modified electrode can not only catalytically oxidize EP and AA, but also separate the catalytic peak potentials of EP and AA by about 183.5 mV. In pH = 7.0 ogisogate byffer solution, the linear range of epinephrine was 5 106 ~ 1 ?10-4 mol/L.展开更多
Microwave radiation was applied to the detection of metamizole sodium by cyclic voltammetry. The electrochemical characteristics of metamizole sodium were studied by cyclic voltammetry at GC electrode under microwave ...Microwave radiation was applied to the detection of metamizole sodium by cyclic voltammetry. The electrochemical characteristics of metamizole sodium were studied by cyclic voltammetry at GC electrode under microwave radiation and a considerable current enhancement was observed for metamizole sodium in aqueous 0.05 mol/L H2SO4. Under the optional conditions, metamizole sodium was determined in the absence and presence of microwave activation. In the absence of microwave activation cyclic voltammogram of metamizole sodium shows good linear relationship in a concentration range of 8.0×10^-5-1.0×10^-3 mol/L in aqueous 0.05 mol/L H2SO4 with a detection limit of 6.75× 10^-6 mol/L（S/N=3） and the equation of linear regression is Ip=12.973c-0.1905（R^2=0.9996, n=6）; in the presence of 80 W microwave activation cyclic voltammogram of metamizole sodiumin shows good linear relationship in a concentration range of 4.0× 10^-5-1.0×10^-3 mol/L in aqueous 0.05 mol/L H2SO4 with a detection limit of 4,41 × 10^-6 mol/L（S/N=3） and the equation of linear regression is Ip=25.107c-0.1193（R^2=0.9973, n=7）. The current in the presence of 80 W microwave activation increases to about 2 orders of magnitude compared with that in the absence of microwave activation. The proposed method in the presence of microwave activation showed high selectivity and sensitivity, and the sampling of the disposal method is simple. The method was verified by the determination of Metamizole Sodium tablet with satisfactory results.展开更多
Li1+xMn2?yO4 spinels with various Li/Mn ratios were synthesized by a solid-state reaction. By X-ray diffraction analysis, Li2MnO3 was detected as a second phase with increasing the Li/Mn ratio; and the role of Li2MnO3...Li1+xMn2?yO4 spinels with various Li/Mn ratios were synthesized by a solid-state reaction. By X-ray diffraction analysis, Li2MnO3 was detected as a second phase with increasing the Li/Mn ratio; and the role of Li2MnO3 in Li1+xMn2-yO4 spinel was discussed. A slow scanning cyclic voltammetry(CV) at the rate of 0.1 mV/s was adopted to characterize the evolutions of 4 V and 5 V plateaus of Li1+xMn2-yO4 spinels. An additional Li+ insertion in 4 V region was observed in both Li-lack and Li-rich spinels at 3.95 V, which is different from the general Li+ insertion with weak Li-Li interaction and strong Li-Li interaction; and this plateau disappeared in the subsequent cycles. The 4.4 V/3.8 V plateaus correspondent to Li+ insertion and extraction of Li2MnO3 were discussed, and these plateaus have a high reversibility with cycling. The 5 V plateau was found only in the Li-rich samples, and this plateau has a tendency to emerge at higher voltage region with increasing Li/Mn ratio.展开更多
A Pr-doped TiO_2-NTs/SnO_2-Sb electrode was prepared by a simple method, cyclic voltammetry(CV). The methyl orange(MO)aqueous solution was selected as a simulated wastewater. The ordered microstructural TiO_2-NTs subs...A Pr-doped TiO_2-NTs/SnO_2-Sb electrode was prepared by a simple method, cyclic voltammetry(CV). The methyl orange(MO)aqueous solution was selected as a simulated wastewater. The ordered microstructural TiO_2-NTs substrate was synthesized by an electrochemical method to obtain large specific surface area and high space utilization. The phase structure, electrode surface morphology and electrochemical properties of electrodes were characterized by XRD, SEM and electrochemical technology, respectively. The results showed that praseodymium oxide was successfully doped into the SnO_2-Sb film by CV method. Due to the doped Pr, the oxygen evolution potential increased from 2.25 V to 2.40 V. The degradation of MO was investigated by UV-vis. The C_t /C_0(φ)was studied as a function to obtain the optimal parameters, such as the amount of doped Pr, current density and initial dye concentration. In addition, the degradation process followed pseudo-first-order reaction kinetics and the rate constant was 0.0993 min^(-1). The result indicated that the introduction of Pr reduced the formation of oxygen vacancies or enhanced the formation of adsorbed hydroxyl radical groups on the surface, thus leading to better activity and stability.展开更多
The mechanism of the cathodic process of Y(Ⅲ) on platinum and molybdenum electrode in molten LiF YF 3 Y 2O 3 was investigated by means of cyclic voltammetry. The number of electron transferred was calculated. Th...The mechanism of the cathodic process of Y(Ⅲ) on platinum and molybdenum electrode in molten LiF YF 3 Y 2O 3 was investigated by means of cyclic voltammetry. The number of electron transferred was calculated. The results show that the electrochemical reduction of Y(Ⅲ) is a reversible one step three electrons reaction and the cathodic process is diffusion controlled. The reductive product easily forms the intermetallic compounds with the platinum electrode, but it is pure yttrium on the molybdenum electrode.展开更多
Superoxide ion was generated by the electrochemical reduction of oxygen at a platinum electrode in dimethylsulphoxide (DMSO). This work was focused on the nucleophilicity and scavenge of electrogenerated\|superoxide ...Superoxide ion was generated by the electrochemical reduction of oxygen at a platinum electrode in dimethylsulphoxide (DMSO). This work was focused on the nucleophilicity and scavenge of electrogenerated\|superoxide ion by cyclic voltammetry. The nucleophilic displacement reactions of superoxide ion with ethyl acetate and diethyl adipate were discussed and the reason for remarkable influence of diethyl adipate was elucidated. The scavenging activity of ascorbic acid was evaluated and the result allowed the conclusion that the scavenging ability of ascorbic acid is much lower in DMSO than in aqueous phase. UV\|spectrum of electrogenerated superoxide ion in DMSO exhibited a single absorption band with λ max at 275 nm, which certified further that the method of electrogeneration was reliable and superoxide ion was stable in DMSO.展开更多
Polymer capable of specific binding to Cu-dipyridyl complex was prepared by molecular imprinting technology. The binding specificity of the polymer to the template (Cu-dipyridyl complex) was investigated by cyclic vo...Polymer capable of specific binding to Cu-dipyridyl complex was prepared by molecular imprinting technology. The binding specificity of the polymer to the template (Cu-dipyridyl complex) was investigated by cyclic voltametric scanning using the carbon paste electrode modified by polymer particles in phosphate buffer solution. Factors that influence rebinding of the imprinted polymer were explored. The result demonstrated that the cyclic voltammetry was an efficient approach to explore interactions between template and imprinted polymers.展开更多
Manganese oxides are a promising class of electrocatalysts for renewable energy devices,such as fuel cells.Mn(Ⅲ) ions with e_(g) electron filling of-1 are the active sites for manganese-based electrocatalysts.However...Manganese oxides are a promising class of electrocatalysts for renewable energy devices,such as fuel cells.Mn(Ⅲ) ions with e_(g) electron filling of-1 are the active sites for manganese-based electrocatalysts.However,Mn(Ⅲ) sites may be disproportionated during electrochemical reactions,thus reducing the number of Mn(Ⅲ) active sites and decreasing the catalytic activity of manganese oxides.In this work,we developed a facile cyclic voltammetry method to monitor the evolution of Mn(Ⅲ) sites on a series of manganese oxides under "working" conditions.We proposed a descriptor S_(Mn(Ⅲ)) to describe the stability of Mn(Ⅲ).Our simulated and experimental results show that the higher is S_(Mn(Ⅲ)),the higher the active Mn(Ⅲ)density,and the higher the electrocatalytic activity of the manganese oxide electrocatalyst.展开更多
This paper reports the determination of stability constants for complexes of Cd(Ⅱ)with Gly, Ala,Val,Asp,Gly—Asp,Asp Gly,Gly—Gly and Gly—Gly—Gly using both micro—pH—metric titra- tions and the application of con...This paper reports the determination of stability constants for complexes of Cd(Ⅱ)with Gly, Ala,Val,Asp,Gly—Asp,Asp Gly,Gly—Gly and Gly—Gly—Gly using both micro—pH—metric titra- tions and the application of convolution—deconvolution cyclic voltammetry at 25℃ and I=0.10 mol· dm^(-3)(KNO_3).Stability constants were calculated from pH—metric data using the SUPERQUAD com- puter program and cyclic voltammograms were collected,stored and manipulated using the EG and G CONDECON 300 software.A considerably larger ligand:metal ratio(e,g.50:1)was possible using voltammetry.Evaluation of results from the two techniques suggests that stability constants for the species[CdL_2]and[CdL_3]are reliable when calculated fromvoltammetry while those for[CdL]are more reliable when determined by pH-metric titration.展开更多
Cyclic voltammetry based on an electrochemical technique is one of the current methods that measure the developments of the electrochemical properties in biomaterial samples under conditions. Biomaterial structure was...Cyclic voltammetry based on an electrochemical technique is one of the current methods that measure the developments of the electrochemical properties in biomaterial samples under conditions. Biomaterial structure was changed by conductive material while these materials caused a connective network in whole of them and was able to transfer electrons inside of biomaterials. These changes in physical and chemical properties are investigated by analysis tools such as cyclic voltammetry (CV), X-radiation (XRF) and Ultraviolet-visible spectroscopy (UV-Vis). Bacterial cellulose is biodegradable, biosynthesis of A. xylinum which is a three-dimensional nano-network structure with a distinct tunnel and pore structure. In this study, the composite process produced electrically conducting bacterial cellulose pellicles containing well-dispersed and embedded multi-walled carbon nanotubes (MWCNTs) Ionic liquids (ILs), as observed in cyclic voltammetry (CV). For this purpose, we used a special tool, called OriginLab which is an industry-leading scientific graphing and data analysis software. The cyclic voltammetry graph presents the behavior of this composite which consists of a relationship between CNT dispersion, conductivity rate and changes in bacterial cellulose structure. The electrical conductivity of the cellulose/MWCNT composite was found different with respect to CNT dispersion. It was found that the incorporation process was a useful method not only for dispersing MWCNTs-ILs in an ultrafine fibrous network structure, but also for enhancing the electrical conductivity of the polymeric membranes.展开更多
文摘The interaction between DNA and the Eu(Phe) 3+ 3 complex ion has been studied by means of cyclic voltammetry and differential UV spectroscopy The results depicted an obvious decrease of peak current in CV plot after the reaction between the two species studied The observed peak potential separation was increased but the diffusion coefficient of Eu complex ion was decreased Hypochromicity was observed at 226 and 258 nm after the predicted interaction of them A preliminary interpretation is proposed for discussion
基金The authors gratefully acknowledge financial support from the Natural Science Foundation of Anhui Province and the Natural Science Foundation of Anhui Education Committee.
文摘Nano-gold (NG) modified glassy carbon electrodes (GCEs) were used for determination of epinephrine (EP) in the presence of high concentration ascorbic acid (AA) by cyclic voltammetry (CV). This modified electrode can not only catalytically oxidize EP and AA, but also separate the catalytic peak potentials of EP and AA by about 183.5 mV. In pH = 7.0 ogisogate byffer solution, the linear range of epinephrine was 5 106 ~ 1 ?10-4 mol/L.
基金Supported by the National Natural Science Foundation of China(No.20665001)the Natural Science Foundation of Guangxi Province,China(No.0832062)
文摘Microwave radiation was applied to the detection of metamizole sodium by cyclic voltammetry. The electrochemical characteristics of metamizole sodium were studied by cyclic voltammetry at GC electrode under microwave radiation and a considerable current enhancement was observed for metamizole sodium in aqueous 0.05 mol/L H2SO4. Under the optional conditions, metamizole sodium was determined in the absence and presence of microwave activation. In the absence of microwave activation cyclic voltammogram of metamizole sodium shows good linear relationship in a concentration range of 8.0×10^-5-1.0×10^-3 mol/L in aqueous 0.05 mol/L H2SO4 with a detection limit of 6.75× 10^-6 mol/L（S/N=3） and the equation of linear regression is Ip=12.973c-0.1905（R^2=0.9996, n=6）; in the presence of 80 W microwave activation cyclic voltammogram of metamizole sodiumin shows good linear relationship in a concentration range of 4.0× 10^-5-1.0×10^-3 mol/L in aqueous 0.05 mol/L H2SO4 with a detection limit of 4,41 × 10^-6 mol/L（S/N=3） and the equation of linear regression is Ip=25.107c-0.1193（R^2=0.9973, n=7）. The current in the presence of 80 W microwave activation increases to about 2 orders of magnitude compared with that in the absence of microwave activation. The proposed method in the presence of microwave activation showed high selectivity and sensitivity, and the sampling of the disposal method is simple. The method was verified by the determination of Metamizole Sodium tablet with satisfactory results.
基金Project(2002CB211800) supported by the National Basic Research Program of China
文摘Li1+xMn2?yO4 spinels with various Li/Mn ratios were synthesized by a solid-state reaction. By X-ray diffraction analysis, Li2MnO3 was detected as a second phase with increasing the Li/Mn ratio; and the role of Li2MnO3 in Li1+xMn2-yO4 spinel was discussed. A slow scanning cyclic voltammetry(CV) at the rate of 0.1 mV/s was adopted to characterize the evolutions of 4 V and 5 V plateaus of Li1+xMn2-yO4 spinels. An additional Li+ insertion in 4 V region was observed in both Li-lack and Li-rich spinels at 3.95 V, which is different from the general Li+ insertion with weak Li-Li interaction and strong Li-Li interaction; and this plateau disappeared in the subsequent cycles. The 4.4 V/3.8 V plateaus correspondent to Li+ insertion and extraction of Li2MnO3 were discussed, and these plateaus have a high reversibility with cycling. The 5 V plateau was found only in the Li-rich samples, and this plateau has a tendency to emerge at higher voltage region with increasing Li/Mn ratio.
基金Supported by the National Natural Science Foundation of China(No.20706041)the Natural Science Foundation of Tianjin(No.09JCYBJC06500)
文摘A Pr-doped TiO_2-NTs/SnO_2-Sb electrode was prepared by a simple method, cyclic voltammetry(CV). The methyl orange(MO)aqueous solution was selected as a simulated wastewater. The ordered microstructural TiO_2-NTs substrate was synthesized by an electrochemical method to obtain large specific surface area and high space utilization. The phase structure, electrode surface morphology and electrochemical properties of electrodes were characterized by XRD, SEM and electrochemical technology, respectively. The results showed that praseodymium oxide was successfully doped into the SnO_2-Sb film by CV method. Due to the doped Pr, the oxygen evolution potential increased from 2.25 V to 2.40 V. The degradation of MO was investigated by UV-vis. The C_t /C_0(φ)was studied as a function to obtain the optimal parameters, such as the amount of doped Pr, current density and initial dye concentration. In addition, the degradation process followed pseudo-first-order reaction kinetics and the rate constant was 0.0993 min^(-1). The result indicated that the introduction of Pr reduced the formation of oxygen vacancies or enhanced the formation of adsorbed hydroxyl radical groups on the surface, thus leading to better activity and stability.
文摘The mechanism of the cathodic process of Y(Ⅲ) on platinum and molybdenum electrode in molten LiF YF 3 Y 2O 3 was investigated by means of cyclic voltammetry. The number of electron transferred was calculated. The results show that the electrochemical reduction of Y(Ⅲ) is a reversible one step three electrons reaction and the cathodic process is diffusion controlled. The reductive product easily forms the intermetallic compounds with the platinum electrode, but it is pure yttrium on the molybdenum electrode.
文摘Superoxide ion was generated by the electrochemical reduction of oxygen at a platinum electrode in dimethylsulphoxide (DMSO). This work was focused on the nucleophilicity and scavenge of electrogenerated\|superoxide ion by cyclic voltammetry. The nucleophilic displacement reactions of superoxide ion with ethyl acetate and diethyl adipate were discussed and the reason for remarkable influence of diethyl adipate was elucidated. The scavenging activity of ascorbic acid was evaluated and the result allowed the conclusion that the scavenging ability of ascorbic acid is much lower in DMSO than in aqueous phase. UV\|spectrum of electrogenerated superoxide ion in DMSO exhibited a single absorption band with λ max at 275 nm, which certified further that the method of electrogeneration was reliable and superoxide ion was stable in DMSO.
基金supported by the National Nalural Science Foundation of China(29975001)
文摘Polymer capable of specific binding to Cu-dipyridyl complex was prepared by molecular imprinting technology. The binding specificity of the polymer to the template (Cu-dipyridyl complex) was investigated by cyclic voltametric scanning using the carbon paste electrode modified by polymer particles in phosphate buffer solution. Factors that influence rebinding of the imprinted polymer were explored. The result demonstrated that the cyclic voltammetry was an efficient approach to explore interactions between template and imprinted polymers.
基金supported by the National Natu-ral Science Foundation of China(Nos.52071231,51722103)the Natural Science Foundation of Tianjin(19JCJQJC61900).
文摘Manganese oxides are a promising class of electrocatalysts for renewable energy devices,such as fuel cells.Mn(Ⅲ) ions with e_(g) electron filling of-1 are the active sites for manganese-based electrocatalysts.However,Mn(Ⅲ) sites may be disproportionated during electrochemical reactions,thus reducing the number of Mn(Ⅲ) active sites and decreasing the catalytic activity of manganese oxides.In this work,we developed a facile cyclic voltammetry method to monitor the evolution of Mn(Ⅲ) sites on a series of manganese oxides under "working" conditions.We proposed a descriptor S_(Mn(Ⅲ)) to describe the stability of Mn(Ⅲ).Our simulated and experimental results show that the higher is S_(Mn(Ⅲ)),the higher the active Mn(Ⅲ)density,and the higher the electrocatalytic activity of the manganese oxide electrocatalyst.
文摘This paper reports the determination of stability constants for complexes of Cd(Ⅱ)with Gly, Ala,Val,Asp,Gly—Asp,Asp Gly,Gly—Gly and Gly—Gly—Gly using both micro—pH—metric titra- tions and the application of convolution—deconvolution cyclic voltammetry at 25℃ and I=0.10 mol· dm^(-3)(KNO_3).Stability constants were calculated from pH—metric data using the SUPERQUAD com- puter program and cyclic voltammograms were collected,stored and manipulated using the EG and G CONDECON 300 software.A considerably larger ligand:metal ratio(e,g.50:1)was possible using voltammetry.Evaluation of results from the two techniques suggests that stability constants for the species[CdL_2]and[CdL_3]are reliable when calculated fromvoltammetry while those for[CdL]are more reliable when determined by pH-metric titration.
文摘Cyclic voltammetry based on an electrochemical technique is one of the current methods that measure the developments of the electrochemical properties in biomaterial samples under conditions. Biomaterial structure was changed by conductive material while these materials caused a connective network in whole of them and was able to transfer electrons inside of biomaterials. These changes in physical and chemical properties are investigated by analysis tools such as cyclic voltammetry (CV), X-radiation (XRF) and Ultraviolet-visible spectroscopy (UV-Vis). Bacterial cellulose is biodegradable, biosynthesis of A. xylinum which is a three-dimensional nano-network structure with a distinct tunnel and pore structure. In this study, the composite process produced electrically conducting bacterial cellulose pellicles containing well-dispersed and embedded multi-walled carbon nanotubes (MWCNTs) Ionic liquids (ILs), as observed in cyclic voltammetry (CV). For this purpose, we used a special tool, called OriginLab which is an industry-leading scientific graphing and data analysis software. The cyclic voltammetry graph presents the behavior of this composite which consists of a relationship between CNT dispersion, conductivity rate and changes in bacterial cellulose structure. The electrical conductivity of the cellulose/MWCNT composite was found different with respect to CNT dispersion. It was found that the incorporation process was a useful method not only for dispersing MWCNTs-ILs in an ultrafine fibrous network structure, but also for enhancing the electrical conductivity of the polymeric membranes.
