3D Seismic Acquisition Technology and Effect in HX Volcanic Area in Liaohe Depression

Multi-stages volcanic are available in HX area, shielding the seismic waves. Previous seismic acquisitions of large size bin, less fold coverage and narrow azimuth result in indistinct fault images, low S/N ratio and the difficulty of multi-stages volcanic characterization. In reference to the successful experience of domestic and overseas volcanic exploration, the low frequency excitation and receiving, and survey with wide range, high coverage, wide azimuth should be paid more attention, associated with two-dimensional and three-dimensional wave equation forward modeling and real data processing contrast analysis method. The image of underlying strata and fault are remarkably improved in the new method, according to the processing results of new seismic data. The new method will provide technical reference for the similar volcanic development area in the future seismic acquisition design.

3-D Seismic Imaging and Morpho-tectonical Interpretation of Saucerlike Dykes of the Tarim Flood Basalt Province, NW China

The detailed structures of the plumbing system of the early Permian Tarim flood basalt were investigated by 3-D seismic imaging.The images show that the Tarim flood basalt mainly erupted from central volcanoes distributed

Research on the 3-D Seismic Structures in Qinghai-Xizang Plateau

Based on the recording data from the analogue and broadband digital seismic stations in and around Qinghai-Xizang (Tibet) Plateau, the three dimensional (3-D) seismic velocity structures in Qinghai-Xizang Plateau were obtained by using the regional body wave tomography and surface wave tomography. The results from these two tomography methods have similar characteristics for P- and S-wave velocity structures in crust and upper mantle. They show that there are remarkable low velocity zones in the upper crust of Lhasa block in the southern Qinghai-Xizang Plateau and the lower crust and upper mantle of Qiangtang block in the northern Qinghai-Xizang Plateau. These phenomena may be related to the different steps of collision process in southern and northern Qinghai-Xizang Plateau.

Topographic seismic effects and avalanche hazard:A case study of Mount Siella(L’Aquila,Central Italy)

In mountainous areas,snow avalanches could be triggered by the shaking produced by earthquakes.The forces induced by the earthquake can cause an irregular increase of shear strength load down the slope,for the presence of complex surface and buried morphologies.Topographic irregularities generate maximum effects of waves amplification linked to wavelengths comparable to the horizontal dimension of the topographic feature.For this reason,the selected time-histories represent an appropriate input for the two-dimensional numerical response analyses when a dynamic phenomenon produce the resonant motion of a whole mountain.This represents an important earthquake-induced hazard in snow-covered mountain areas with high probability of seismic events.Some valleys are located in regions with scare ground motion data and investments on infrastructures are not always accompanied by adequate protection against earthquake-induced avalanches.The paper points out a simple deterministic approach for selecting a set of real accelerograms applied to a real case of Siella Mountain(Central Italy)where a large avalanche destroying a tourist facility of Rigopiano resort on 18 January 2017.The selected time histories were used as input for the two-dimensional numerical model of the subsoil to evaluate the topographic seismic amplification in ridge and compare it with the results of other authors.These methods suggest that morphology-related inertial effects should be considered as an overload action on snow layers when controlling multi-hazard studies and spatial planning.

Deep-large faults controlling on the distribution of the venting gas hydrate system in the middle of the Qiongdongnan Basin, South China Sea

Many locations with concentrated hydrates at vents have confirmed the presence of abundant thermogenic gas in the middle of the Qiongdongnan Basin(QDNB).However,the impact of deep structures on gasbearing fluids migration and gas hydrates distribution in tectonically inactive regions is still unclear.In this study,the authors apply high-resolution 3D seismic and logging while drilling(LWD)data from the middle of the QDNB to investigate the influence of deep-large faults on gas chimneys and preferred gasescape pipes.The findings reveal the following:(1)Two significant deep-large faults,F1 and F2,developed on the edge of the Songnan Low Uplift,control the dominant migration of thermogenic hydrocarbons and determine the initial locations of gas chimneys.(2)The formation of gas chimneys is likely related to fault activation and reactivation.Gas chimney 1 is primarily arises from convergent fluid migration resulting from the intersection of the two faults,while the gas chimney 2 benefits from a steeper fault plane and shorter migration distance of fault F2.(3)Most gas-escape pipes are situated near the apex of the two faults.Their reactivations facilitate free gas flow into the GHSZ and contribute to the formation of fracture‐filling hydrates.

3-D Seismic Identification and Characterization of Ancient Channel Morphology

It is easy to identify ancient fluvial morphologic types by the outcrop,log and core data.However,the horizontal distribution and geometry of the channels can only be identified and predicted by relying on the 3-D seismic data.The 3-D seismic horizon slices,especially,can play an important role in the sandstone prediction of meandering rivers,distributary channels and low-sinuosity channels.Every microfacies unit,including main channels,such as sinuous or branching channels,levee,crevasse channels,ligule crevasse splay and floodplain etc.can be identified.Braided channel sandstones are planar tabular lateral-connected sandbodies and the distribution of thick main channel belts can only be identified from 3-D seismic data.As the braided sandstones are ubiquitous,their occurrence and distribution do not need to be predicted.Generally,the coal velocity is so low that it can create a strong amplitude reflection in coal strata.It consequently conceals the amplitude respondence to anastomosing channel sandstone which could be identified from 3-D seismic inversion data sometimes.Case studies of mud-rich low-sinuosity rivers identified with 3-D seismic data indicate that the scales and width-to-thickness ratio of such sandbodies are small,laterally unconnected,and generally occurred on distant or further parts of an alluvial fan under dry climate conditions.Sometimes extraction of seismic attributes of every reflection event along horizons is expected to maximize expression of the spatial evolutions of ancient channels.

Precise Seismic Substructural Model of the Eocene Chorgali Limestone in the Turkwal Oil Field, Central Potwar, Pakistan

The precise seismic substructural interpretation of the Turkwal oil field in the Central Potwar region of district Chakwal of Pakistan has been carried out. The research work was confined to the large fore-thrust that serves as an anticlinal structural trap through ten 2 D seismic lines. A precise seismic substructural model of the Eocene Chorgali Limestone with precise orientation of thrust and oblique slip faults shows the presence of a huge fracture, which made this deposit a good reservoir. The abrupt surface changes in dip azimuth for the Eocene Chorgali Limestone verifies the structural trends and also the presence of structural traps in the Turkwal field. The logs of three wells(Turkwal deep X-2, Turkwal-01 and Fimkassar-01) were analyzed for petrophysical studies, well synthetic results and generation of an Amplitude Versus Offset(AVO) model for the area. The AVO model of Turkwal deep X-2 shows abrupt changes in amplitude, which depicts the presence of hydrocarbon content. Well correlation technique was used to define the overall stratigraphic setting and the thickness of the reservoir formation in two wells, Turkwal-01 and Turkwal deep X-2. The Eocene Chorgali Limestone in Turkwal-01 is an upward thrusted anticlinal structure and because of the close position of both wells to the faulted anticlinal structure, its lesser thickness differs compared to Turkwal deep X-2. The overall results confirm that the Turkwal field is comparable to several similar thrust-bound oil-bearing structures in the Potwar basin.

Tectonic characteristics and structural styles of a continental rifted basin:Revelation from deep seismic reflection profiles

The Fushan Depression is a half-graben rifted sub-basin located in the southeast of the Beibuwan Basin, South China Sea. The Paleogene Liushagang sequence is the main hydrocarbon-bearing stratigraphic unit in the sub-basin. Using three-dimensional（3-D）seismic data and logging data over the sub-basin, we analyzed structural styles and sedimentary characteristics of the Liushagang sequence. Five types of structural styles were defined： ancient horst, traditional slope, flexure slope-break, faulted slope-break and multiple-stage faults slope, and interpretations for positions, background and development formations of each structural style were discussed. Structural framework across the sub-basin reveals that the most remarkable tectonic setting is represented by the central transfer zone（CTZ） which divides the sub-basin into two independent depressions, and two kinds of sequence architectures are summarized：（i） the western multi-stage faults slope;（ii） the eastern flexure slope break belt. Combined with regional stress field of the Fushan Depression, we got plane combinations of the faults, and finally built up plan distribution maps of structural system for main sequence. Also, we discussed the controlling factors mainly focused on subsidence history and background tectonic activities such as volcanic activity and earthquakes. The analysis of structural styles and tectonic evolution provides strong theoretical support for future prospecting in the Fushan subbasin and other similar rifted basins of the Beibuwan Basin in South China Sea.

3D Seismic Attributes for Structural Analysis in Compressional Context: A Case Study from Western Sichuan Basin

Compressional region usually forms complex thrust faults system, which is difficult to identify using traditional migration profiles. The successful application of three-dimensional（3D） seismic attributes analysis greatly reduces the difficulty, and improves the accuracy and efficiency of seismic interpretation and structural analysis. In this paper, we took Qiongxi area in the compressional region of western Sichuan as an example, using two 3D seismic attributes, coherence and instantaneous phase, to identify fault assemblages and variations both vertically and laterally. The results show that the study area mainly consists of NS-, NE- and NEE-trending faults. The NS-trending faults are the largest and have a component of sinistral slip controlling the formation of NEE-trending faults, while the NE-trending faults are intermediate in scale, formed earlier and were cut by the NS-trending faults. Our results demonstrate that using seismic attributes for structural analysis have the following advantages：（1） more details of major fault zones,（2） highlighting minor faults which are hardly traced in seismic migration cube, and（3） easier acquisition of accurate fault systems. The application of seismic attributes provides a new idea for deciphering fine and complicated structures, and will significantly contribute to the development of objective and precise geological interpretation in the future.

Seismic geomorphology and stratigraphic trap analyses of the Lower Cretaceous siliciclastic reservoir in the Kopeh Dagh-Amu Darya Basin

Lower Cretaceous Shurijeh–Shatlyk Formations host some of the main reservoirs in the Kopeh Dagh-Amu Darya Basin.Exploration in this area so far has focused on the development of structural traps, but recognition of stratigraphic traps in this area is of increasing importance. Integration of 3D seismic data with borehole data from thirteen wells and five outcrop sections was used to identify potential reservoir intervals and survey the hydrocarbon trap types in the East Kopeh Dagh Foldbelt(NE Iran). Analyses of horizontal slices indicated that the lower Shurijeh was deposited in a braided fluvial system.Generally, three types of channel were identified in the lower Shurijeh Formation: type 1, which is low-sinuosity channels interpreted to be filled with non-reservoir fine-grained facies;type 2, which is a moderately sinuous sand-filled channel with good prospectively;and type 3, which is narrow, high sinuosity channel filled with fine-grained sediments. Results indicate that upper Shurijeh–Shatlyk Formations were deposited in fluvial to delta and shallow marine environments. The identified delta forms the second reservoir zone in the Khangiran Field. Study of the stratigraphic aspects of the Shurijeh succession indicates that both lower and upper Shurijeh reservoirs are stratigraphic reservoir traps that improved during folding.

Study of a 3-D seismic gap

Ｓｔｕｄｙｏｆａ３ＤｓｅｉｓｍｉｃｇａｐＹＵＡＮＱＩＮＧＺＨＵ１）（朱元清）ＣＯＮＧＪＵＮＸＩＡ１）（夏从俊）ＧＥＴＵＺＵＯＬＩ２）（左力格图）ＨＵＩＭＩＮＬＩ１）（李慧民）１）ＳｅｉｓｍｏｌｏｇｉｃａｌＢｕｒｅａｕｏｆＳｈａｎｇｈａｉ，...

1976年内蒙古巴音木仁6.2级地震前地震危险度D值异常动态演变特征

对1976年9月23日内蒙古巴音木仁6.2级地震进行地震危险度D值的回溯性检验,发现震前2年震例震中区确实出现D值异常,随着主震时刻的不断临近,D值异常呈现减弱—消失—出现—消失至主震发生的现象。分析认为利用该参数进行时、空扫描计算,确实能反应主震前小地震活动的时空特点,该方法是一种值的深入探索的地震预测手段。

Deep seismic sounding investigation into the deep structure of the magma system in Changbaishan-Tianchi volcanic region

The magma system of Changbaishan-Tianchi Volcanic region is studied with three-dimensional deep seismic sounding (DSS) technique. The results show that the magma system of Changbaishan-Tianchi volcanic region, mainly characterized by low velocity of P wave, can be divided into three parts in terms of depth. At the depth range of 9-15 km, the distribution of the magma system is characterized by extensiveness, large scale and near-SN orientation. This layer is the major place for magma storage. From the depth of 15 km down to the lower crust, it is characterized by small lateral scale, which indicates the 'trace' of magma intrusion from the upper mantle into the crust and also implies that the magma system most probably extends to the upper mantle, or even deeper.(less than 8-9 km deep), the range of magma distribution is even smaller, centering on an SN-oriented area just north of the Tianchi crater. If low velocity of P wave is related to the magma system, it then reflects that the magma here is still in a state of relatively high temperature. In this sense, the magma system of Changbaishan-Tianchi volcanic region is at least not 'remains', in other words, it is in an 'active' state.

Multi dimensional Seismic Response Analysis of Base Isolated Frame Structure with 3D Isolator

The three dimensional lead rubber dish spring bearing (3DB) is proposed in this paper. The 3DB is composed of lead rubber bearing (LRB) and dish spring bearing (DSB) with damper in series. The 3DB put forward in this paper is effective in the resolution of difficulties in strong vertical capacity and vertical damping of three dimensional isolation bearings. It effectively suppresses rocking motions as well. The analytical model and motion equations of multi dimensional seismic responses of 3D base isolated frame structures are established. Taking a five storey frame structure as an example, an extensive simulation analysis is carried out. The results show that the 3D base isolated structure with the proposed 3DB is effective in 3D isolation; it can reduce seismic responses by 50 % compared to a non isolated structure. Therefore, the 3D isolation problem in building can be solved easily and effectively with the 3DB proposed in this paper.

2-D crustal structure of Changbaishan-Tianchi volcanic region determined by seismic traveltime inversion

2-D velocity structure and tectonics of the crust and upper mantle is revealed by inversion of seismic refraction and wide-angle reflection traveltimes acquired along the profile L1 in the Changbaishan-Tianchi volcanic region. It is used in this study that seismic traveltime inversion for simultaneous determination of 2-D velocity and interface structure of the crust and upper mantle. The result shows that, under Changbaishan-Tianchi crater, there exists a low-velocity body in the shape of an inverted triangle, and the crustal reflecting boundaries and Moho all become lower by a varying margin of 2-6 km, forming a crustal root which is assumed to be the Changbaishan-Tianchi volcanic system. Finally, we make a comparison between our 2-D velocity model and the result from the studies by using trial-and-error forward modeling with SEIS83.

Seismicity Factor A-Value and Its Application to Mid-Term Earthquake Prediction in North China

The seismicity factor A-value is defined by synthesizing the seismicity precursors in time, space and magnitude in this paper. The seismicity data of moderate or small earthquakes during 1972 ~ 1996 in North China are used to perform spacial scanning of seismicity factor A-value. The result shows that there are obviously anomaly zones of A-value with better prediction effect in the mid-term of 2~3 years before most moderately strong earthquakes. Some problems regarding the mid-term prediction using A-value have been discussed.

Two-step interface and velocity inversion—— Study o e of the Tangshan seismic region

This paper studies the computation method of two step inversion of interface and velocity in a region. The 3 D interface is described by a segmented incomplete polynomial; while the reconstruction of 3 D velocity is accomplished by the principle of least squares in functional space. The computation is carried out in two steps. The first step is to inverse the shape of 3 D interface; while the second step is to do 3 D velocity inversion by distributing the remaining residual errors of travel time in accordance with their weights. The data of seismic sounding in the Tangshan Luanxian seismic region are processed, from which the 3 D structural form in depth of the Tangshan seismic region and the 3 D velocity distribution in the crust below the Tangshan Luanxian seismic region are obtained. The result shows that the deep 3 D structure in the Tangshan seismic region trends NE on the whole and the structure sandwiched between the NE trending Fengtai Yejituo fault and the NE trending Tangshan fault is an uplifted zone of the Moho. In the 3 D velocity structure of middle lower crust below that region, there is an obvious belt of low velocity anomaly to exist along the NE trending Tangshan fault, the position of which tallies with that of the Tangshan seismicity belt. The larger block of low velocity anomaly near Shaheyi corresponds to a denser earthquake distribution. In that region, there is an NW trending belt of high velocity anomaly, probably a buried fault zone. The lower crust below the epicentral region of the Tangshan M S=7.8 earthquake is a place where the NE trending belt of low velocity anomaly meets the NW trending belt of high velocity anomaly. The two sets of structures had played an important role in controlling the preparation and occurrence of the M S=7.8 Tangshan earthquake.

Simulation by Dislocation Model and Anomaly Property Determination of Huge Leveling Deformation at Linfen Seismic Station

In this study,under the assumption that the two huge leveling deformation anomalies at Linfen seismic station were caused by the Luoyunshan fault( Tumen-Yuli section)movement, we computed the vertical deformation field distribution based on the rectangular fault dislocation model and measured the ground deformation field of the study area using D-InS AR technology. The results are as follows:( 1) Theoretically,the ground vertical deformation field caused by fault movement could be within the elliptical deformation area with the long axis parallel to the fault strike. The largest deformation region is located in the center of the area in the hanging wall of the fault,and the deformation gradually decreases to zero toward the periphery; the impact range induced by the two deformations is respectively as follows: The long axes are about 18 km and26km,the short axes are about 12 km and 17 km and the obvious deformation amplitude is about 1- 3mm and 4- 14 mm.( 2) The measured deformation field by D-InS AR shows that there is no continuous deformation area consistent with the fault strike,and only the presence of land subsidence possibly caused by groundwater excessive exploitation,with the deformation amplitude about 10- 12 mm and 1- 5mm.( 3) The measured deformation field is not consistent with the theoretical result on deformation area and amplitude,which indicates that the fault movement is not the main cause of Linfen huge leveling deformation,but may rather be because of local deformation of the soil layers in the hanging wall of the fault.( 4) By combining the fault dislocation model simulation with the D-InS AR technology measurement,we can determine effectively the nature of the anomalyof the huge cross-fault leveling deformation,thus provide scientific basis for verification of significant leveling anomalies.

基于D-InSAR技术的泸定地震形变场提取与震后灾害防治

2022年9月5日四川省甘孜州泸定县发生Ms 6.8地震,提取同震形变场,对指导救灾、地震破裂分析具有重要意义。利用D-InSAR技术基于二轨差分法处理覆盖泸定地震影响范围内的两景Sentinel-1A数据,通过调整处理方法与参数,提取了该地震的同震形变场。结果表明,同震变形区主要分布于鲜水河断裂西侧,以震中为中心,南北分为沉降区与隆升区,雷达视线向最大形变量分别为9.5 cm和17.3 cm。强震变形引发大量次生地质灾害,并易形成地震—崩塌、滑坡—泥石流链式灾害,震中及强变形区应加强次生地质灾害防治及泥石流预防。

STUDY ON THE SEISMIC SOURCE MECHANISMS OF THE TIBETAN PLATEAU

Tibet has often been called the “Roof of the World”. The plateau is probably the largest and highest area ever to exist in Earth history, with an average elevation exceeding 5000m. The uplifting of the Tibetan Plateau is the result of continent\|continent collision. This process is still going on and is significant for us to understand the formation and the evolution of global continent.It’s generally accepted is act as the northern boundary of the Tibetan Plateau is the Altyn Tagh Fault. The Altyn Tagh Fault is recognized as a large\|scale left\|lateral strike\|slip fault, many studies indicate it is the northern margin of the eastward extruded of crustal blocks and the northern boundary of the Plateau as well. Compared to the knowledge on the southern plateau and the Himalaya, we know much less about the northern plateau and the Altyn Tagh Fault. Some people have already begun to realize the importance of the latter for the revealing the uplifting of the Plateau.