A largescale antenna system （LSAS） with digital beamforming is expected to significantly increase energy efficiency （EE） and spectral efficiency （SE） in a wireless communication system. However, there are many c...A largescale antenna system （LSAS） with digital beamforming is expected to significantly increase energy efficiency （EE） and spectral efficiency （SE） in a wireless communication system. However, there are many challenging issues related to calibration, energy consumption, and cost in implementing a digital beamforming structure in an LSAS. In a practical LSAS deployment, hybrid digitalanalog beamforming structures with active antennas can be used. In this paper, we investigate the optimal antenna configuration in an N ＆#215; M beamforming structure, where N is the number of transceivers, M is the number of active antennas per transceiver, where analog beamforming is introduced for individual transceivers and digital beamforming is introduced across all N transceivers. We analyze the green point, which is the point of maximum EE on the EESE curve, and show that the logscale EE scales linearly with SE along a slope of lg2/N. We investigate the effect of M on EE for a given SE value in the case of fixed NM and independent N and M. In both cases, there is a unique optimal M that results in optimal EE. In the case of independent N and M, there is no optimal （N, M） combination for optimizing EE. The results of numerical simulations are provided, and these results support our analysis.展开更多
The whole airspace phased array telemetry,track and command(TT&C)system is regarded as the development tendency of next generation TT&C system,and the distribution of the antenna units and the beamforming tech...The whole airspace phased array telemetry,track and command(TT&C)system is regarded as the development tendency of next generation TT&C system,and the distribution of the antenna units and the beamforming technology have sparked wide interest in this field.A method for antenna distribution is proposed based on the linear subarrays technology.A symmetrical truncated cone conformal array is composed of the linear subarrays placed on the generatrix.The impact of truncated cone bottom radius and elevation angle on beamforming are studied and simulated.Simulation results verify the system design.展开更多
A new recursive algorithm with the partial parallel structure based on the linearly constrained minimum variance （LCMV） criterion for adaptive monopulse systems is proposed. The weight vector associated with the ori...A new recursive algorithm with the partial parallel structure based on the linearly constrained minimum variance （LCMV） criterion for adaptive monopulse systems is proposed. The weight vector associated with the original whole antenna array is decomposed into several adaptive weight sub-vectors firstly. An adaptive algorithm based on the conventional LCMV principle is then deduced to update the weight sub-vectors for sum and difference beam, respectively. The optimal weight vector can be obtained after convergence. The required computational complexity is evaluated for the proposed technique, which is on the order of O（N） and less than that of the conventional LCMV method. The flow chart scheme with the partial parallel structure of the proposed algorithm is introduced. This scheme is easy to be implemented on a distributed computer/digital signal processor （DSP） system to solve the problems of the heavy computational burden and vast data transmission of the large-scale adaptive monopulse array. Then, the monopulse ratio and convergence rate of the proposed algorithm are evaluated by numerical simulations. Compared with some recent adaptive monopulse estimation methods, a better performance on computational complexity and monopulse ratio can be achieved with the proposed adaptive method.展开更多
For a large-scale adaptive array, the heavy computational load and the high-rate data transmission are two challenges in the implementation of an adaptive digital beamforming system. An efficient parallel digital beam...For a large-scale adaptive array, the heavy computational load and the high-rate data transmission are two challenges in the implementation of an adaptive digital beamforming system. An efficient parallel digital beamforming （DBF） algorithm based on the least mean square algorithm （PLMS） is proposed. An appropriate method is found to partition the least mean square （LMS） algorithm into a number of operational modules, which can be easily executed in a distributed-parallel-processing fashion. As a result, the proposed PLMS algorithm provides an effective solution that can alleviate the bottleneck of high-rate data transmission and reduce the computational cost. PLMS requires less computational load than that of the conventional parallel algorithms based on the recursive least square （RLS） algorithm, as well as it is easier to be implemented to do real time adaptive array processing. Moreover, low sidelobe of the beam pattern is obtained by constraining the static steering vector with Tschebyscheff coefficients. Finally, a scheme of the PLMS algorithm using distributed-parallel-processing system is also proposed. The simulation results demonstrate that the PLMS algorithm has the same interference cancellation performance as that of the conventional LMS algorithm. Moreover, the PLMS algorithm can obtain the same good beamforming performance, regardless how the algorithm is partitioned. It is expected that the proposed algorithm will be used in a large-scale adaptive array system to deal with real time adaptive digital beamforming processing.展开更多
文摘A largescale antenna system （LSAS） with digital beamforming is expected to significantly increase energy efficiency （EE） and spectral efficiency （SE） in a wireless communication system. However, there are many challenging issues related to calibration, energy consumption, and cost in implementing a digital beamforming structure in an LSAS. In a practical LSAS deployment, hybrid digitalanalog beamforming structures with active antennas can be used. In this paper, we investigate the optimal antenna configuration in an N ＆#215; M beamforming structure, where N is the number of transceivers, M is the number of active antennas per transceiver, where analog beamforming is introduced for individual transceivers and digital beamforming is introduced across all N transceivers. We analyze the green point, which is the point of maximum EE on the EESE curve, and show that the logscale EE scales linearly with SE along a slope of lg2/N. We investigate the effect of M on EE for a given SE value in the case of fixed NM and independent N and M. In both cases, there is a unique optimal M that results in optimal EE. In the case of independent N and M, there is no optimal （N, M） combination for optimizing EE. The results of numerical simulations are provided, and these results support our analysis.
文摘The whole airspace phased array telemetry,track and command(TT&C)system is regarded as the development tendency of next generation TT&C system,and the distribution of the antenna units and the beamforming technology have sparked wide interest in this field.A method for antenna distribution is proposed based on the linear subarrays technology.A symmetrical truncated cone conformal array is composed of the linear subarrays placed on the generatrix.The impact of truncated cone bottom radius and elevation angle on beamforming are studied and simulated.Simulation results verify the system design.
基金supported by the National Natural Science Foundation of China(11273017)
文摘A new recursive algorithm with the partial parallel structure based on the linearly constrained minimum variance （LCMV） criterion for adaptive monopulse systems is proposed. The weight vector associated with the original whole antenna array is decomposed into several adaptive weight sub-vectors firstly. An adaptive algorithm based on the conventional LCMV principle is then deduced to update the weight sub-vectors for sum and difference beam, respectively. The optimal weight vector can be obtained after convergence. The required computational complexity is evaluated for the proposed technique, which is on the order of O（N） and less than that of the conventional LCMV method. The flow chart scheme with the partial parallel structure of the proposed algorithm is introduced. This scheme is easy to be implemented on a distributed computer/digital signal processor （DSP） system to solve the problems of the heavy computational burden and vast data transmission of the large-scale adaptive monopulse array. Then, the monopulse ratio and convergence rate of the proposed algorithm are evaluated by numerical simulations. Compared with some recent adaptive monopulse estimation methods, a better performance on computational complexity and monopulse ratio can be achieved with the proposed adaptive method.
文摘For a large-scale adaptive array, the heavy computational load and the high-rate data transmission are two challenges in the implementation of an adaptive digital beamforming system. An efficient parallel digital beamforming （DBF） algorithm based on the least mean square algorithm （PLMS） is proposed. An appropriate method is found to partition the least mean square （LMS） algorithm into a number of operational modules, which can be easily executed in a distributed-parallel-processing fashion. As a result, the proposed PLMS algorithm provides an effective solution that can alleviate the bottleneck of high-rate data transmission and reduce the computational cost. PLMS requires less computational load than that of the conventional parallel algorithms based on the recursive least square （RLS） algorithm, as well as it is easier to be implemented to do real time adaptive array processing. Moreover, low sidelobe of the beam pattern is obtained by constraining the static steering vector with Tschebyscheff coefficients. Finally, a scheme of the PLMS algorithm using distributed-parallel-processing system is also proposed. The simulation results demonstrate that the PLMS algorithm has the same interference cancellation performance as that of the conventional LMS algorithm. Moreover, the PLMS algorithm can obtain the same good beamforming performance, regardless how the algorithm is partitioned. It is expected that the proposed algorithm will be used in a large-scale adaptive array system to deal with real time adaptive digital beamforming processing.
